BARCODE / LABEL PRINTER GUIDE 2010 BARCODE / LABEL PRINTER GUIDE Citizen barcode/label printers get the job done and more...
BARCODE/LABEL PRINTER CLP-521 / 621 / 631 Desktop Printer - Industrial Performance Metalic mechanisms for strength and durability CLP-621/623 Easy Media Loading The Hi-Open case lifts up vertically meaning that the printer s footprint does not change as the cover is opened, making it ideal for tight spaces. The Hi-Lift mechanism makes loading labels and ribbons effortless thanks to the wide-opening design of the printer. Paper width 25.4~ 118 mm Folding paper CLP-521 Durable Internal Power Supply Driver Interface Typical Applications Logistic Courier Shelf-Edge Retail All printers feature an internal power supply to provide the most reliable operation and avoid the problem of external power supplies. ARCP installed ARCP stands for Active Ribbon Control & Positioning. ARCP automatically balances the tension to provide better print quality while avoiding ribbon wrinkles. *Optional accessory Warehousing Textile Card Tags CLP-521 Features CLP-621/631 Hi-Lift mechanism for easy ribbon and media loading. Hi-Open case for vertical opening and safe closing. Self-contained metal mechanism for durable operation. Internal power supply for reliability: no external block that can be easily damaged. Choice of emulations: Datamax I-Class & DMX400 or Zebra ZPL-II. 360 meter ribbon capacity for fewer ribbon changes with standard 1 inch ribbon cores. ARCP ribbon anti-wrinkle and automatic tensioning system. Adjustable media sensor as standard with label gap and black mark sensing. Optional Ethernet interface. Availbale in cream-white and dark-grey case colors. Logistic and Courier Labels Warehouse and Distribution Retail and Item Labelling 01 Type Classification C L P- 620 Z G 1) 2) 3) 1) Model type CLP-521 : 203 dpi resolution CLP-621 : 203 dpi resolution CLP-631 : 300 dpi resolution 2) Emulation (Languages) None : Datamax Z : Zebra 3) Body case color G : Dark grey None : Cream-white (Order by production)
Product Versions Direct Thermal The CLP-521 is a direct thermal printer and prints on coated media. It doesn t require a ribbon. The CLP-621 and CLP-631 are thermal transfer printers using a wide variety of ribbons. 300 dpi Resolution The CLP-631 printers are ideal for not only small labels with 2D matrix DataBar, QR-Code and PDF417 but also for printing company logos, CE and WEEE logos. ARCP As uniform tension is applied on the ribbon at all times; the necessity for setup or adiustment is eliminated. Small used ribbon Large unused ribbon Printer Specifications Technology Resolution Print Speed (max.) Print Width (max.) Media Width (min. to max.) Media Length (min. to max.) Roll Size (max.), Core Size Media Sensor Media Thickness (min. to max.) Ribbon Size Ribbon System Emulations (Languages) Standard Interfaces Optional Interfaces Case Type, Mechanism Type Control Panel RAM (Standard Memory) Flash (Non-Volatile Memory) Windows drivers, design software Dimension (W x D x H mm) Weight (approx.) CLP-521 CLP-521Z CLP-621 CLP-621Z CLP-631 CLP-631Z Direct Thermal Thermal Transfer & Direct Thermal 203 dpi (8 dots/mm) 300 dpi (12 dots/mm) 100 mm/sec. 104.1 mm 12.5 ~118.1 mm 6.35 ~1625.6mm 6.35 ~812.8 mm Internally: 125 mm, Externally: 200 mm with optional holder, Core size: 25 mm Fully adjustable with label gap, card notch and reflective black mark 0.0635-0.254 mm Not applicable 74 mm max. diameter, 360 meter length, 1 inch cores ARCP automatic ribbon tension adjustment Datamax Zebra Datamax Zebra Datamax Zebra Parallel (IEEE-1284), Serial (RS-232C), USB (version 1.1) Ethernet (10/100 BaseT) Hi-Open plastic case with safe. Hi-Lift metal mechanism 4 buttons and 4 LEDs 8.0 Mb total, 0.5 Mb available for user 2.0 Mb total, 0.5 Mb available for user Windows XP / 2003 / 2008 / Vista / 7 231 x 289 x 183 231 x 289 x 270 3.6 Kg 4.5 Kg Optional Accessories Auto cutter Cutting type Cutting paper Cut accuracy JM98901-0M Guillotine cutter Max. thickness: 0.25 mm Min. length: 25.4 mm Width: 118 mm Max. 25.4 mm Min. 300,000 cuts (Paper thickness: 0.06 0.15 mm) 100,000 cuts (Paper thickness: 0.15 0.25 mm) Cut length tolerance: ±1.0 mm or less Left and right cut tolerance: ±1.0 mm or less Peeler Width of liner Length of label Min. width of label Max. width of label Thickness of label Thickness of liner Max. dia. of roll media Inner dia. of roll meter Peeling position accurracy JM98910-0M 25.4-118 mm 25.4-120 mm Label: Fine media Thickness: 0.09 mm (including glue layer) Rolled inwards Label must be positioned at 16-22 mm from the left edge of liner, which is viewed from the front of media exit. Must be narrower than liner 0.17 mm or less 0.07 mm or less 203 mm 76 mm or more 100 Km or 1 million peeled labels (when using specified media) ±1.0 mm (Peeling position varies depending on the type of media, the size of roll media and the size of ink ribbon, so adjust it to the optimum condition as needed.) 02
BARCODE/LABEL PRINTER CL-S700 / 700R / 703 High performance with easy access Ingeniously designed for easy operation and reliability Space-Saving Design Concept The Hi-Open case lifts up vertically meaning that the printer s footprint does not change as the cover is opened, making it ideal for tight spaces. The Hi-Lift mechanism makes loading labels and ribbons effortless thanks to the wide-opening design of the printer. Paper width 25.4~ 118 mm Front Loading Rewinder The clever and unique CL-S700R includes an internal rewinder that is effortless to use. The front door drops down and the liner or labels are loaded automatically. Easy Configuration The large graphic LCD gives a clear indication of printer status and enables easy printer configuration. Features CL-S700R CL-S700/703 Driver Interface Typical Applications Logistic Courier Shelf-Edge Retail ARCP installed ARCP stands for Active Ribbon Control & Positioning. ARCP automatically balances the tension to provide better print quality while avoiding ribbon wrinkles. * Optional accessory Warehousing Textile Card Tags Hi-Lift mechanism for easy ribbon and media loading. Hi-Open case for vertical opening, with no increase in footprint and safe closing Cross-Emulation: Zebra and Datamax languages standard. Backlit LCD control panel for easy configuration. All inclusive front access facilitate easy media ribbon changing. Power switch located in recess at front of the printer. Adjustable media sensor as standard with label gap and black mark sensing. Ingenious front-loading rewinder for peeling or batch mode. Optional internal Ethernet card. Optional 2 types of cutters and peeler available. Logistic and Courier Labels Warehouse and Distribution Retail and Item Labelling 03 Type Classification C L - S 700 R 1) 2) 1) Model type CL-S700 : 203 dpi resolution CL-S703 : 300 dpi resolution 2) Peeler & Rewinder R : Including Peeler and Rewinder (Order by production) * CL-S703 is not aveilable
Product Versions Internal Peel & Rewind The CL-S700R features an integrated peeler with liner rewinder for easy label dispensing. The peel sensor waits for each label to be peeled off before printing another. 300 dpi Resolution The CL-S703 is ideal for not only small labels with 2D matrix DataBar, QR-Code and PDF417 but also for printing company logos, CE and WEEE logos. ARCP As uniform tension is applied on the ribbon at all times; the necessity for setup or adiustment is eliminated. Small used ribbon Large unused ribbon General Specifications Technology Resolution Print Speed (max.) Print Width (max.) Media Width (min. to max.) Media Length (min. to max.) Roll Size (max.), Core Size (min.) Media Sensor Media Thickness (min. to max.) Ribbon Size Ribbon System Emulations (Languages) Standard Interfaces Optional Interfaces Case Type, Mechanism Type Control Panel RAM (Standard Memory) Flash (Non-Volatile Memory) Windows drivers, design software Internal Peeler & Rewinder Side (W x D x H mm) Weight (approx.) CL-S700 CL-S700R CL-S703 Thermal Transfer & Direct Thermal 203 dpi (8 dots/mm) 300 dpi (12 dots/mm) 254 mm/sec. 203 mm/sec. 104.1 mm 25.4 mm to 118.1 mm 6.35 mm to 812.8 mm 200 mm outside diameter, Core size min. of 25 mm. External media slot Fully adjustable with label gap, card notch and reflective black mark 0.0635-0.254 mm 86.5 mm max. Outside Diameter: 450 meters, length: Use 25 mm ARCP automatic ribbon tension adjustment Cross-Emulation Parallel (IEEE-1284), Serial (RS-232C), USB (version 1.1) Ethernet (10/100 BaseT) Hi-Open metal case with safe, soft-close feature. Hi-Lift mechanism with 90 opening 4-line back-lit graphic LCD and 4 buttons 16.0 Mb total, 1.0 Mb available for user 4.0 Mb total, 1.0 Mb available for user Windows XP / 2003 / 2008 / Vista / 7 No Yes No 255 x 490 x 265 255 x 490 x 385 255 x 490 x 265 13.3 Kg 17.6 Kg 13.3 Kg Optional Media Handling Two Auto cutter Versions The CL-S700 and CL-S703 printers feature two cutter types: a heavyduty cutter for thick card and plastics media and a high-speed cutter for standard labels and paper. Optional accessory Auto cutter CL-S700 / CL-S703 (Cutter does not fit on R model) Cutting type Cutting paper Cut accuracy Optional Peeler An optional peeler can be added to the CL-S700 and CL-S703 enabling the peel-and-present function without altering the footprint. JN98901-0M JN98911-0M Circle cutter Rotary cutter Max. thickness: 0.25 mm Max. thickness: 0.28 mm Min. length: 25.4mm Width: 118 mm Max. 25.4 mm Min. 300,000 cuts *1 100,000 cuts *2 100,000 cuts *3 Cut length tolerance: ±1.0 mm or less Left and right cut tolerance: ±1.0 mm or less *1: Paper thickness... 0.06 0.15 mm *2: Paper thickness... 0.28 mm *3: Paper thickness... 0.15 0.25 mm Peeler Width of liner Length of label Min. width of label Max. width of label Thickness of label Thickness of liner Max. dia. of roll media Inner dia. of roll meter Peeling position Accuracy Batch Mode Printing The CL-S700R can be used for core-to core batch label printing using the optional rewinder paper guide (JN24214-**F). CL-S700 / CL-S703 JN98909-0M 25.4-118 mm 25.4-120 mm Label: Fine media/thickness: 0.09 mm (including glue layer) Rolled inwards Label Must be positioned at 16-22 mm from the left edge of liner, which is viewed from the front of media exit. Label must be narrower than liner 0.17 mm or less 0.07 mm or less 203 mm 76 mm or more 100 Km or 1 million peeled labels (when using specified media) ±1.0 mm (Peeling position varies depending on the type of media, the size of roll media and the size of ink ribbon, so adjust it to the optimum condition as needed.) 04
LABEL & BARCODE PRINTER CLP-8301 Wide-format lable printing up to A4 width Ideal as a laser-replacement printer for delivery notes Space-Saving Design Concept The Hi-Open case lifts up vertically and closes safely and the Hi-Lift mechanism enables for easy media loading. The Hi-Lift mechanism makes loading labels and ribbons effortless thanks to the wide-opening design of the printer. Paper width 76.2~ 228.6 mm Simple to use control panel Easy configuration and operation of the printer by using the backlit LCD control panel. Status messages are clearly displayed. Features Driver Interface * Optional accessory Typical Applications Pallet and shipping labels Chemical warning labels Sign and logo printing Laser printer replacement Hi-Lift mechanism for easy ribbon and media loading. Hi-Open case for vertical opening with minimal increase in footprint and safe closing. Front access when changing media and ribbons avoiding the need to move the printer. Adjustable media sensor as standard with label gap and black mark sensing. Optional tear-wait version is ideal for replacing laser printers in warehouses. Instant first page out and approximately 20 pages /min. print speed. Backlit LCD control panel for easy configuration with sophisticated menu system. Optional interface includes USB. Logistic and Courier Labels Warehouse and Distribution Chemical warning labels 05 Type Classification C L P- 8301 1) 1) Model type CLP-8301 : CLP-8301
Product Versions 300 dpi Resolution The CLP-8301 is ideal for not only small labels with 2D matrix DataBar, QR-Code and PDF417, but also for printing company logos, CE and WEEE logos. Printer Specifications CLP-8301 Technology Resolution Print Speed (max.) Print Width (max.) Media Width (min. to max.) Media Length (min. to max.) Roll Size (max.), Core Size (min.) Media Sensor Media Thickness (min. to max.) Media Types Ribbon Size Emulations (Languages) Standard Interfaces Optional Interfaces Case Type, Mechanism Type Control Panel RAM (Standard Memory) Flash (Non-Volatile Memory) Windows drivers, design software Dimension (W x D x H mm) Weight (approx.) Thermal Transfer & Direct Thermal 300 dpi (12 dots/mm) 100 mm/sec. 219.5 mm 76.2 ~ 228.6 mm 12.7 ~ 508.0 mm with extended memory Outside diameter: 200 mm, Standard core size: 76 mm, External media slot Fully adjustable with label gap, card notch and reflective black mark 0.140 ~ 0.254 mm Roll or fanhold media, die-cut, continuous or perforated labels, tags, tickets. Outside diameter: max. 78.0 mm, Cores: 450 meters length on 25 mm Full Datamax W-Class, DMX/800. partial Zebra ZPL Parallel (Centronics), Serial (RS-232C) USB (version 1.1) Hi-Open metal case with safe, soft-close feature. Hi-Lift mechanism with 90 opening 2-line back-lit LCD and 6 buttons 8.0 Mb total, 0.5 Mb available for user 2.0 Mb total, 0.5 Mb available for user (Memory expansion of 24Mb optionally available) Free-of-charge on CD with printer, including support for Windows XP / 2003 / 2008 / Vista / 7 395 x 415 x 260 18.0 Kg Optional Accessories Auto cutter Cutting type Cutting paper Cut accuracy JH98905-0S Guillotine cutter Max. thickness: 0.3 mm Min. length: 25.4 mm Width: 228.9 mm Max. 76.2 mm Min. More than 1,00,000 cuts (Paper thickness: 0.23 mm) Cut length tolerance: ±1.5mm or less Left and right cut tolerance: 2.0 mm or less 06
BARCODE / LABEL PRINTER GUIDE 2010 OVERSEAS SALES DEPT., INFORMATION PRODUCTS SALES DIVISION : 6-1-12, TANASHI-CHO, NISHI-TOKYO-SHI, TOKYO 188-8511, JAPAN Tel.(81)-424-68-4608 Fax.(81)-424-68-4996 http://www.citizen-systems.co.jp e-mail : sales-op@systems.citizen.co.jp CITIZEN is a registered trade mark of CITIZEN Holdings CO., LTD., Japan. CITIZEN es una marca registrada de CITIZEN Holdings CO., LTD., Japón. All specifications are subject to change without prior notice. All trademarks or registered trademarks are the property of their respective owners. Printed in Japan CTLG-BAR10