Basic information Name of the Tool Tool developer Used in following countries First issued (year) 200 Webpage Users Designers Consultants Construction companies Investors Public institutions Consumers / end -users Researchers Others (please specify) LEED Italia GBC Italia GBC Italia www.gbcitalia.org Structure of the assessment system Building use: all Number of hierarchic levels 2 Number of issues at top level 7 Number of issues at middle level - Number of criteria (low level) 64 Number of environmental criteria 36 Number of social criteria 0 Number of economic criteria 4 Percentage of quantitative criteria 77% Number of mandatory criteria 8 List of Criteria LEED Italia is a voluntary certification program that can be applied to any building type and any building lifecycle phase. It promotes design and construction of sustainable buildings, with a low environmental impact, by classifying their performance in seven evaluation areas: Time and physical extends Pysical boundaries Building Site Neighbourhood Time boundaries Pre Design Design Construction Operation Refurbishment Existing buildings SS GA EA MR QI IP PR Sostenibilità del Sito (SS Sustainable Site) Gestione delle Acque (WE Water Efficiency;) Energia e Atmosfera (EA Energy and Atmosphere) Materiali e Risorse (MR Material and Resources) Qualità Ambientale Interna (IEQ Indoor Environmental Quality) Innovazione nella Progettazione (D Innovation in Design) Priorità Regionale (RP Regional Priority) Building uses Residential/dwellings Offices Following there is a short description of the goals of the seven evaluation areas and the list of all related criteria. Schools Retail Industrial Healthcare Hotel Other (please specify) Page 0 of 7 ENERBUILD: Final Result 6.
Criteria by issues (Environmental, Social, Economic) Every LEED credit faces an environmental issue, as the main goal of the rating system is reducing or eliminating negative environmental impacts through high-performance, market-leading design, construction, and operations practices. But LEED credits could interest other design aspects: they often face economic issue and sometimes face community (social) issue. In fact, as an added benefit, green operations and management reduce operating costs, enhance building marketability, increase workers productivity, and reduce potential liability resulting from indoor air quality problems. Criteria by weight In LEED Italia, the points distribution between credits is based on the potential environmental impacts and human benefits of each credit. The impacts are defined as the environmental or human effect of the design and construction process, such as greenhouse gas emissions, fossil fuel use, toxins and carcinogens, air and water pollutants, indoor environmental conditions. A combination of approaches, including energy modeling, life-cycle assessment, and transportation analysis, is used to quantify each type of impact. The resulting allocation of points among credits is called credit weighting. The LEED 2009 credit weightings process is based on the following parameters, which maintain consistency and usability across rating systems: All LEED Italia credits are worth a minimum of point. All LEED Italia credits are positive, whole numbers; there are no fractions or negative values. All LEED Italia credits receive a single, static weight, without variations based on project location. LEED Italia rating system has 00 base points; Innovazione nella Progettazione and Priorità Regionale credits provide opportunities for up to 0 bonus points. Issue SS _ Sostenibilità del Sito SS _ Sustainable Site Tot. 26 This credit category has the aim to reduce on site damages, minimizing the building s environmental impacts on ecosystems and waterways. In fact it encourages development on previously developed site; reduces construction-related pollution and site erosion; rewards smart transportation choices and controls storm-water runoff, heat island effect and light pollution. Environmental Economic Community Prereq. Prevenzione dell inquinamento da attività di cantiere Construction Activity Pollution Prevention required Credit Selezione del sito Site Selection Densità edilizia e vicinanza ai servizi Development Density and Community Connectivity 5 Recupero e riqualificazione dei siti contaminati Brownfield Redevelopment Credit 4. Trasporti alternativi: accesso ai trasporti pubblici Alternative Transportation: Public Transportation Access 6 Credit 4.2 Trasporti alternativi: portabiciclette e spogliatoi Alternative Transportation: Bicycle Storage and Changing Rooms Credit 4.3 Trasporti alternativi: veicoli a bassa emissione e a carburante alternativo Alternative Transportation: Low-Emitting and Fuel- Efficient Vehicles 3 Credit 4.4 Trasporti alternativi: capacità dell area di progetto Alternative Transportation: Parking Capacity 2 ENERBUILD: Final Result 6. Page of 7
..2 Credit 6. Credit 6.2 Credit 7. Credit 7.2 Credit 8 Sviluppo del sito: proteggere e ripristinare l habitat Site Development: Protect or Restore Habitat Sviluppo del sito: massimizzazione degli spazi aperti Site Development: Maximize Open Space Acque meteoriche: controllo della quantità Stormwater: Quantity Control Acque meteoriche: controllo della qualità Stormwater: Quality Control Effetto isola di calore: superfici esterne Heat Island Effect: Non Roof Effetto isola di calore: coperture Heat Island Effect: Roof Riduzione dell inquinamento luminoso Light Pollution Reduction SECTION WEIGHT 23,64% Issue GA _ Gestione delle Acque WE _ Water Efficiency The goal of this credit category is to reduce water use, inside and out, through more efficient appliances, fixtures and fittings inside and water-wise landscaping outside. Tot. 0 Environmental Economic Community Prereq. Riduzione dell uso dell acqua - Water Use Reduction required Credit Gestione efficiente delle acque a scopo irriguo Water-Efficient Landscaping Tecnologie innovative per le acque reflue Innovative Wastewater Technologies Riduzione dell uso dell acqua - Water Use Reduction 2-4 2-4 SECTION WEIGHT 9,09% 2 Issue EA _ Energia e Atmosfera EA _ Energy and Atmosphere This category encourages different energy strategies: commissioning; efficient design and construction; efficient appliances, systems and lighting; energy use monitoring; the use of renewable and clean sources of energy, generated on-site or off-site. Tot. 35 Environmental Economic Community Prereq. Commissioning di base dei sistemi energetici dell edificio Fundamental Commissioning of Building Energy Systems required Prereq. 2 Prestazioni energetiche minime Minimum Energy Performance required Prereq. 3 Gestione di base dei fluidi refrigeranti Fundamental Refrigerant Management required Credit Ottimizzazione delle prestazioni energetiche Optimize Energy Performance -9 Produzione in sito di energie rinnovabili On Site Renewvable Energy -7 Commissioning avanzato dei sistemi energetici Enhanced Commissioning 2 Page 2 of 7 ENERBUILD: Final Result 6.
Credit 4 Gestione avanzata dei fluidi refrigeranti Enhanced Refrigerant Management Misure e collaudi - Measurement and Verification 3 Credit 6 Energia verde - Green Power 2 SECTION WEIGHT 3,82% 2 Issue MR _ Materiali e Risorse MR _ Material and Resources This evaluation area promotes the reduction of waste as well as reuse and recycling; encourages the selection of renewable, recycled and regional materials and the use of certified wood. Tot. 4 Environmental Economic Community Prereq. Raccolta e stoccaggio dei materiali riciclabili Storage and Collection of Recyclables required Credit. Riutilizzo degli edifici: mantenimento di murature, solai e coperture esistenti - Building Reuse: Mantain Existing Walls, Floors and Roof -3 Credit.2 Riutilizzo degli edifici: mantenimento del 50% di elementi non strutturali interni - Building Reuse: Mantain 50% of Non-Structural Elements Gestione dei rifiuti da costruzione Constraction Waste Management -2 Riutilizzo dei materiali - Materials Reuse -2 Credit 4 Contenuto di riciclato - Recycled Contents -2 Materiali estratti, lavorati e prodotti a distanza limitata (materiali regionali) - Regional Materials -2 Credit 6 Materiali rapidamente rinnovabili Rapidly Renewable Materials -2 Credit 7 Legno certificato - Certified Wood SECTION WEIGHT 2,73% Issue QI _ Qualità Ambientale Interna IEQ _ Indoor Environmental Quality Tot. 5 The goal of this area is promoting strategies that can improve the indoor air quality, and the building environmental quality, as thermal and lighting control, access of natural daylight into the building and external views. Environmental Economic Community Prereq. Prestazioni minime per la qualità dell aria Minimum Indoor Air Quality Performance required Prereq. 2 Controllo ambientale del fumo da tabacco Environmental Tobacco Smoke (ETS) Control required Credit Monitoraggio della portata d aria di rinnovo Outdoor Air Delivery Monitoring Incremento della ventilazione - Increased ventilation. Piano di gestione IAQ: fase costruttiva - IAQ Plan: During Construction.2 Piano di gestione IAQ: prima dell occupazione IAQ Plan: Before Occupancy ENERBUILD: Final Result 6. Page 3 of 7
Credit 4. Credit 4.2 Credit 4.3 Credit 4.4 Credit 6. Credit 6.2 Credit 7. Materiali basso-emissivi: adesivi, primers, sigillanti, materiali cementizi e finiture per legno - Low Emitting Materials: Adhesives and Sealants Materiali basso-emissivi: pitture Low Emitting Materials: Paints and Coatings Materiali basso-emissivi: pavimentazioni Low Emitting Materials: Flooring Systems Materiali basso-emissivi: prodotti in legno composito e fibre vegetali - Low Emitting Materials: Composite Wood and Agrifiber Products Controllo di fonti chimiche ed inquinanti indoor Indoor Chemical and Pollutant Source Control Controllo e gestione degli impianti: illuminazione Controllability of Systems: Lighting Controllo e gestione degli impianti: comfort termico Controllability of Systems: Thermal Comfort Comfort termico: progettazione Thermal Comfort: Design Credit 7.2 Comfort termico: verifica - Thermal Comfort: Verification Credit 8. Credit 8.2 Luce naturale e visione: luce naturale per il 75% degli spazi - Daylight and Views: Daylight Luce naturale e visione: visuale esterna per il 90% degli spazi - Daylight and Views: Views SECTION WEIGHT 3,64% IP _ Innovazione nella Progettazione ID _ Innovation in Design This category provides bonus points for projects that use new and innovative technologies and strategies to improve a building s performance required by other LEED credits. Moreover, the credit category rewards projects for including a LEED AP on the team to ensure an approach to the design and construction phase. Credit. Credit.2 Credit.3 Credit.4 Credit.5 Innovazione nella progettazione: titolo specifico Innovation in Design: Specific Title Innovazione nella progettazione: titolo specifico Innovation in Design: Specific Title Innovazione nella progettazione: titolo specifico Innovation in Design: Specific Title Innovazione nella progettazione: titolo specifico Innovation in Design: Specific Title Innovazione nella progettazione: titolo specifico Innovation in Design: Specific Title Professionista Accreditato LEED (LEED AP) LEED Accredited Professional (LEED AP) Tot. 6 SECTION WEIGHT 5,45% Environmental Issue Economic Community Page 4 of 7 ENERBUILD: Final Result 6.
Issue PR _ Priorità Regionale RP _ Regional Priority Tot. 4 GBC Italia has identified the environmental concerns that are locally most important for every region of the country, and six LEED credits that address those local priorities were selected for each region. A project that earns a regional priority credit will earn one bonus point in addition to any points awarded for that credit. Up to four extra points can be earned in this way. Environmental Economic Community Credit. Priorità regionale: Credito specifico Regional Priority: Specific Credit Credit.2 Priorità regionale: Credito specifico Regional Priority: Specific Credit Credit.3 Priorità regionale: Credito specifico Regional Priority: Specific Credit Credit.4 Priorità regionale: Credito specifico Regional Priority: Specific Credit SECTION WEIGHT 3,64% The tables show that the most important area in the LEED Italia rating system is Energia e Atmosfera area, with a weight percentage about equal to 32%. A the second place there is Sostenibilità del Sito, which has a weight percentage of 23,64%. The criteria about indoor environmental quality (QI section) represent the 3,64%, Materiali e Risorse area identifies a percentage of score equal to 2,73% and the credits about water efficiency (GA area) are 9% of the total score. The two areas Innovazione nella Progettazione and Priorità Regionale give a bonus contribute of 9%. Certification Process Who issues the certificate The manager/owner of the system Certification bodies Accredited assessors (direct) Accredited assessor, after a check from the manager/owner of the system Other (please state) Synthetic description of the certification process LEED Italia certification regards all project design phases, corresponding to the following steps:. Predesign entails gathering information, recognizing stakeholder needs, and establishing project goals. 2. Schematic design explores several design options and alternatives, with the intent to establish an agreed-upon project layout and scope of work. 3. Design development begins the process of spatial refinement and usually involves the first design of a project s energy systems. 4. Construction documents carry the design into the level of details for all spaces and systems and materials so that construction can take place. 5. Construction. 6. Substantial completion is a contractual benchmark that usually corresponds to the point at which a client could occupy a nearly completed space. 7. Final completion. 8. Certificate of occupancy is the official recognition by a local building department that a building conforms to applicable building and safety codes. Project teams should study the principles and objectives of LEED in the site selection and design process as soon as possible. In fact, LEED Italia certification application requires the submission of an overall project narrative with the completed documentation requirements. The project narrative has to describe the applicant s organization, building, site, and team. This narrative allows the LEED review team to know the design features. The general documentation also requires a description of the basic details pertaining to project site conditions, ENERBUILD: Final Result 6. Page 5 of 7
construction scope and timeline, occupant and usage data, and project team identification. The project registration in LEED-Online is the first step towards the LEED certification. The project becomes active in the Online application when the payment of the registration fee has been processed. Once the project registration is completed, the design team begins to prepare information and perform calculations to satisfy the criteria requirements. To earn LEED Italia certification, the applicant project must satisfy all the prerequisites and a minimum number of points to attain the established project ratings as listed below. Since submittal documentation should be continuously collected throughout every design and construction phase, it is helpful to designate in the design team a LEED AP leader, who is responsible for managing the gathering and elaboration of the LEED documentation. The certification is divided into two principal phases and all the credits of the tool are divided into two different categories: design phase credits, based on design phase documentation, and construction phase credits, based on construction phase documentation. The following tables show the list of the Design credits and the list of the Construction credits. Design Credits Sostenibilità del Sito Sustainable Site Gestione delle Acque Water Efficiency Credit Credit 4. Credit 4.2 Credit 4.3 Credit 4.4.2 Credit 6. Credit 6.2 Credit 7.2 Credit 8 Prereq. Credit Energia e Atmosfera Energy and Atmosphere Qualità Ambientale Interna Indoor Environmental Quality Construction Credits Sostenibilità del Sito Sustainable Site Energia e Atmosfera Energy and Atmosphere Materiali e Risorse Material and Resources Qualità Ambientale Interna Indoor Environmental Quality Innovazione nella Progettazione Innovation in Design Prereq. 2 Prereq. 3 Credit Credit 4 Prereq. Prereq. 2 Credit Credit 6. Credit 6.2 Credit 7. Credit 7.2 Credit 8. Credit 8.2 Prereq.. Credit 7. Prereq. Credit 6 Prereq. Credit. Credit.2 Credit 4 Credit 6 Credit 7..2 Credit 4. Credit 4.2 Credit 4.3 Credit 4.4 Credit Page 6 of 7 ENERBUILD: Final Result 6.
The Design phase review is optional and consists of a preliminary design phase review and a final design phase review. After this phase GBCI formally rules on the application by designating each credit as either Anticipated or Denied. Participating in a design phase review does not guarantee award of any credit and will not result in LEED certification, but this process serves to allow project teams the opportunity to assess the likelihood of credit achievement, and requires follow through to ensure the design is realized to design specification. At the completion of construction, the project team submits all attempted credits for review. If the project team has had a design phase review and any of the design phase Anticipated credits have changed, additional documentation must be submitted to substantiate continued compliance with credit requirements. For design phase Anticipated credits that have no changed, the project team must submit a verification that the design has been executed per requirements in the construction phase. Upon receipt of the full certification application and fee, a final review will be conducted. All applicant-verified design phase credits that were designated as anticipated and have not changed since the design phase review will be declared as awarded. All other credits will be designated as either Awarded or Denied. LEED Italia certification is attained according to the following scale: Base Certified: 40-49 points; Silver Certified: 50-59 points; Gold Certified: 60-79 points; Platinum Certified: 80 and more points. Buildings that achieve one of these rating levels will receive a formal letter of certification. Cost of the certification Registration is a flat fee paid up front at the time of registration. The rates are: 725 Euro for GBCI Members and 970 Euro for Non-Members. Less than 4650 mq Between 4650-46500 mq More than 46500 mq LEED 2009 Fixed Rate Based on Square Footage Fixed Rate Design Review USGBC Members.620 0,035 /mq 6.200 Non-Members.825 0,040 /mq 8.250 Expedited Fee* 4050 Euro regardless of square footage Construction Review USGBC Members 405 0,008 /mq 4.050 Non-Members 60 0,03 /mq 6.00 Expedited Fee* 4050 Euro regardless of square footage Combined Design & Construction Review USGBC Members.825 0,040 /mq 8.200 Non-Members 2.230 0,048 /mq 22.200 Expedited Fee* 9.00 regardless of square footage CIRs 80 Û per credit ENERBUILD: Final Result 6. Page 7 of 7
Outputs of the certification process At the end of the certification process the building owner receives a formal letter of certification, with indication of the rating level achieved and a crystal glass plate to affix at the entrance of the building. Till now no buildings have been certified LEED Italia even if 75 buildings are already in the certification process. The certification body is gbci (www.gbci.org). The attached certificate and label are the ones issued by USGBC Connection to legislation and technical standards Regulations LEED is internationally known and recognized as one of the most available green building certification system. In USA, many federal state and local governments have adopted various types of LEED initiatives and incentives. Some areas have implemented or are considering incentives for LEED-certified buildings. Many local governments have adopted LEED incentive programs. Program incentives include tax credits, tax breaks, density bonuses, reduced fees, priority or expedited permitting, free or reduced-cost technical assistance, grants and low-interest loans. In Italy, the Autonomous Province of Trento, since 2008, has imposed the adoption of LEED rating system for assessing sustainability of buildings for the construction of new province owned buildings, but, for now, there is no one building certified, yet. The text of the law is at the following link: http://www.delibere.provincia.tn.it/scripts/ GSearch.asp SS _ Sostenibilità del Sito SS _ Sustainable Site Reference Standards Prereq. Prevenzione dell inquinamento da attività di cantiere Construction Activity Pollution Prevention documento EPA Construction General Permit 2003 Credit Selezione del sito Site Selection Direttiva del Consiglio 92/43 CEE Credit 4. Credit 4.2 Densità edilizia e vicinanza ai servizi Development Density and Community Connectivity Recupero e riqualificazione dei siti contaminati Brownfield Redevelopment Trasporti alternativi: accesso ai trasporti pubblici Alternative Transportation: Public Transportation Access Trasporti alternativi: portabiciclette e spogliatoi Alternative Transportation: Bicycle Storage and Changing Rooms Direttiva del Consiglio 79/409 CEE D.Lgs.52/2006 D.Lgs.52/2006 Page 8 of 7 ENERBUILD: Final Result 6.
Credit 4.3 Credit 4.4..2 Credit 6. Credit 6.2 Credit 7. Credit 7.2 Credit 8 Trasporti alternativi: veicoli a bassa emissione e a carburante alternativo Alternative Transportation: Low-Emitting and Fuel-Efficient Vehicles Trasporti alternativi: capacità dell area di progetto Alternative Transportation: Parking Capacity Sviluppo del sito: proteggere e ripristinare l habitat Site Development: Protect or Restore Habitat Sviluppo del sito: massimizzazione degli spazi aperti Site Development: Maximize Open Space Acque meteoriche: controllo della quantità Stormwater: Quantity Control Acque meteoriche: controllo della qualità Stormwater: Quality Control Effetto isola di calore: superfici esterne Heat Island Effect: Non Roof Effetto isola di calore: coperture Heat Island Effect: Roof Riduzione dell inquinamento luminoso Light Pollution Reduction ASTM E408-7(996)e ASTM C37-04 ASTM E903-96 ASTM E98-97 ASTM C549-04 ASTM E408-7(996)e ASTM C37-04 ASTM E903-96 ASTM E98-97 ASTM C549-04 Standard ASHRAE/IESNA 90./2007 _ UNI 089 GA _ Gestione delle Acque WE _ Water Efficiency Reference Standards Prereq. Credit Riduzione dell uso dell acqua - Water Use Reduction Gestione efficiente delle acque a scopo irriguo Water-Efficient Landscaping UNI EN 246/2004 UNI EN 2/998 UNI EN 2056-/200 DPR 236/998 UNI EN 3407/2006 UNI 997/2007 Energy Policy Act (EPAct) del 2005 UNI EN 2056-/200 DPR 236/998 ENERBUILD: Final Result 6. Page 9 of 7
Tecnologie innovative per le acque reflue Innovative Wastewater Technologies Riduzione dell uso dell acqua - Water Use Reduction Energy Policy Act (EPAct) del 2005 UNI EN 2056-/200 DPR 236/998 UNI EN 3407/2006 Uniform Plumbimg Code 2006 - section 402 International Plumbimg Code 2006 - section 604 UNI EN 246/2004 UNI EN 2/998 UNI EN 2056-/200 _ DPR 236/998 UNI EN 3407/2006 UNI 997/2007 Energy Policy Act (EPAct) del 2005 EA _ Energia e Atmosfera EA _ Energy and Atmosphere Prereq. Prereq. 2 Prereq. 3 Commissioning di base dei sistemi energetici dell edificio Fundamental Commissioning of Building Energy Systems Prestazioni energetiche minime Minimum Energy Performance Gestione di base dei fluidi refrigeranti Fundamental Refrigerant Management Reference Standards Standard ASHRAE/IESNA 90./2007 UNI/TS 300-/2008 UNI/TS 300-2/2008 D.Lgs. 92/2005 (modificato ed integrato dal D.Lgs.3/2006 e dal DPR 59/2009) EN ISO 6946/2007 UNI EN ISO 3786/2007 UNI EN ISO 3370/200 UNI EN ISO 4683/2007 UNI EN ISO 593/2008 regolamento CE 2037/2000 Page 20 of 7 ENERBUILD: Final Result 6.
Credit Credit 4 Ottimizzazione delle prestazioni energetiche Optimize Energy Performance Produzione in sito di energie rinnovabili On Site Renewvable Energy Commissioning avanzato dei sistemi energetici Enhanced Commissioning Gestione avanzata dei fluidi refrigeranti Enhanced Refrigerant Management Misure e collaudi - Measurement and Verification Standard ASHRAE/IESNA 90./2007 UNI EN 0349/994 UNI/TS 300-/2008 UNI/TS 300-2/2008 UNI EN ISO 3790/2008 UNI EN 525/2008 UNI EN 5265/2008 UNI EN 5603/2008 D.Lgs. 92/2005 (modificato ed integrato dal D.Lgs.3/2006 e dal DPR 59/2009) EN ISO 6946/2007 UNI EN ISO 3786/2007 UNI EN ISO 3370/200 UNI EN ISO 4683/2007 UNI EN ISO 593/2008 UNI EN ISO 536-4-3/2008 UNI EN 536-4-6/2008 EN 536-4-7/2008 UNI EN 5603/2008 D.Lgs. 387/2003 Standard ASHRAE/IESNA 90./2007 IPMVP, Vol.III, EVO 30000./2006 UNI EN 5378/2008 Credit 6 Energia verde - Green Power D.Lgs. 387/2003, art.2 MR _ Materiali e Risorse MR _ Material and Resources Reference Standards Prereq. Credit. Raccolta e stoccaggio dei materiali riciclabili Storage and Collection of Recyclables Riutilizzo degli edifici: mantenimento di murature, solai e coperture esistenti - Building Reuse: Mantain Existing Walls, Floors and Roof Credit.2 Riutilizzo degli edifici: mantenimento del 50% di elementi non strutturali interni - Building Reuse: Mantain 50% of Non-Structural Elements Gestione dei rifiuti da costruzione Constraction Waste Management Riutilizzo dei materiali - Materials Reuse ENERBUILD: Final Result 6. Page 2 of 7
Credit 4 Contenuto di riciclato - Recycled Contents International Standard ISO 402 Credit 6 Materiali estratti, lavorati e prodotti a distanza limitata (materiali regionali) - Regional Materials Materiali rapidamente rinnovabili Rapidly Renewable Materials Credit 7 Legno certificato - Certified Wood For now no information about this credit is available. QI _ Qualità Ambientale Interna IEQ _ Indoor Environmental Quality Prereq. Prereq. 2 Credit..2 Credit 4. Credit 4.2 Credit 4.3 Prestazioni minime per la qualità dell aria Minimum Indoor Air Quality Performance Controllo ambientale del fumo da tabacco Environmental Tobacco Smoke (ETS) Control Monitoraggio della portata d aria di rinnovo Outdoor Air Delivery Monitoring Incremento della ventilazione - Increased ventilation Piano di gestione IAQ: fase costruttiva - IAQ Plan: During Construction Piano di gestione IAQ: prima dell occupazione IAQ Plan: Before Occupancy Materiali basso-emissivi: adesivi, primers, sigillanti, materiali cementizi e finiture per legno - Low Emitting Materials: Adhesives and Sealants Materiali basso-emissivi: pitture Low Emitting Materials: Paints and Coatings Materiali basso-emissivi: pavimentazioni Low Emitting Materials: Flooring Systems Reference Standards Standard ASHRAE 62./2007 UNI EN 525/2008 UNI EN 3779/2008 UNI EN 3829/2002 Residential Manual for Compliance with California s 200 Energy Efficiency Standards. Standard ASHRAE 62./2007 Standard ASHRAE 62./2007 UNI 0339/995 UNI EN 525/2008 UNI EN 3779/2008 IAQ Guidelines for Ocuupied Buildings Under Construction UNI EN 779/2005 UNI EN ISO 6000-/2006 UNI EN ISO 6000-2/2006 UNI EN ISO 6000-5/2006 GEV Emicode Testing Method/2009 Direttiva 2004/42/ CEE Carpet and Rug Institute Green Label Plus Testing Program SCAQMD Rule 68, VOC limits SCAQMD Rule 3, Architectural Coatings FloorScore program California department of Health Services Standard State of California Standard 350 Page 22 of 7 ENERBUILD: Final Result 6.
Credit 4.4 Credit 6. Credit 6.2 Credit 7. Credit 7.2 Credit 8. Credit 8.2 Materiali basso-emissivi: prodotti in legno composito e fibre vegetali - Low Emitting Materials: Composite Wood and Agrifiber Products Controllo di fonti chimiche ed inquinanti indoor Indoor Chemical and Pollutant Source Control Controllo e gestione degli impianti: illuminazione - Controllability of Systems: Lighting Controllo e gestione degli impianti: comfort termico Controllability of Systems: Thermal Comfort Comfort termico: progettazione Thermal Comfort: Design Comfort termico: verifica - Thermal Comfort: Verification Luce naturale e visione: luce naturale per il 75% degli spazi - Daylight and Views: Daylight Luce naturale e visione: visuale esterna per il 90% degli spazi - Daylight and Views: Views UNI EN 779/2005 Standard ANSI/ASHRAE 62./2007 UNI EN 525/2008 UNI 0339/995 Standard ANSI/ASHRAE 55/2004 UNI EN ISO 7730/2006 UNI EN 5232/2007 UNI 0339/995 UNI EN ISO 373/2004 UNI EN 525/2008 UNI EN ISO 7730/2006 UNI EN ISO 7726/2002 Standard ANSI/ASHRAE 55/2004 UNI EN 373/2004 UNI EN 525/2008 UNI EN ISO 7730/2006 UNI EN ISO 7726/2002 ASTM D003-07e UNI EN 40/2000 UNI EN 593/2008 IP _ Innovazione nella Progettazione ID _ Innovation in Design Credit Innovazione nella progettazione: titolo specifico Innovation in Design: Specific Title Professionista Accreditato LEED (LEED AP) LEED Accredited Professional (LEED AP) Reference Standards There is no standard referenced for this credit. Refer to the Summary of Referenced Standards section in each credit for relevant standards. LEED Accredited Professional PR _ Priorità Regionale RP _ Regional Priority Reference Standards Credit Priorità regionale: Credito specifico Regional Priority: Specific Credit Refer to the standards for a particular Regional Priority credit. ENERBUILD: Final Result 6. Page 23 of 7
Incentives or granting schemes The Autonomous Province of Trento foresees economic incentives for sustainable building. These incentives are given to New Construction or Major Renovation certified with LEED Rating System (according to the law n. 825/2007 of the Province) and an Energy consumption lower than 60 kwh/m 2 a year (energy class B). The following tables show the quantity contributions of the Province to realization of sustainable buildings. (Reference: www.provincia.tn.it) Recipients Privates Companies Public Institutions admissibility yes yes yes, with low limits accumulation percentage contribution minimum technical economic threshold see point 5.4 of criteria 35% 35% 70% 80 mq 00 mq 00 mq maximum contribution / semplified: de minimis evaluation: de minimis or low 800/2008 / Calculus of the maximum expenditure allowed SCNR < 500 m 2 500 mq < SCNR < 2000 m 2 SCNR > 2000 m 2 Certified 220,00*S / m 2 0.000 + 0*S / m 2 275.000 + 27,5*S2 / m 2 Silver 270,00*S / m 2 35.000 + 37,5*S / m 2 34.250 + 55*S2 / m 2 Gold 330,00 *S / m 2 65.000 + 65*S / m 2 42.500 + 82,5*S2 / m 2 Platinum 357,50*S / m 2 78.750 + 220*S / m 2 508.750 + 0*S2 / m 2 SCNR net heated area S SCNR till 500 m 2 S part of SCNR between 500 and 2000 m 2 S2 part of SCNR over 2000 m 2 Page 24 of 7 ENERBUILD: Final Result 6.