WHEN IT RAINS, IT POURS WATER DAMAGE RESTORATION



Similar documents
IUB Water Damage Restoration Guideline

A Guide to Water Damage Restoration MISSION STATEMENT THE DOME COMMITMENT

Procedures for Gray or Black Water Remediation from Flooding Contamination in Buildings

WATER DAMAGE RECOVERY G U I D E

Restoring Peace of Mind.

Remediation of Mold and Bacteria from Clean, Gray and Black Water Contamination in Buildings

University of Vermont

Responding to Building Water Damage. Types of Water Damage. Why is Water Damage Such a Concern?

Disasters Happen. We take care of them all.

Water Damage Restoration Program December 1, 2015

Managing Water Infiltration Into Buildings

Basic S.W.A.T. Protocols

Managing Water Infiltration into Buildings. Water Damage Check List

University of Nevada, Reno Facilities Services Department STANDARD OPERATING PROCEDURE. Facilities Maintenance Services

Part 2: Drying Out Your Home

REMEDIAL PROCEDURES FOR WATER DAMAGE IN BUILDINGS

Old Dominion University Mold Management Plan

WHY CHOOSE FREEZE DRYING TO SALVAGE WET BOOKS & PAPER

Water Incursion Standard Operating Procedure

WATER DAMAGE: Mitigating the Loss

Case Studies. Disaster Recovery Restoration Remediation Decontamination

Creating the Ideal Environment for Accelerated Drying Times on Construction and Restoration Projects

Mold, Mildew, Fungi What s the Difference? Mold: The Good, the Bad and the Ugly

CENTER FOR ENVIRONMENTAL HEALTH Emergency Response/Indoor Air Quality Program

FIRE DAMAGE RESTORATION. Fire Damage Restoration in Colorado Springs, CO. Serving El Paso County and surrounding areas

DISASTER PLANNING AND RECOVERY An Ounce of Prevention

Joel Belmont IICRC Certified WRT, ASD, AMRT

IICRC Technical Advisory on In-Place Drying

Mold and Mildew Mold and mildew can be detected by sight, smell and touch.

How To Prevent More Damage From Damage

Emergency Restoration Specialists. Water Damage TIP SHEET. For Homeowners

Response to Water Intrusion and Mold/Microbial Growth

Mold Response and Remediation Plan

Clean Water: Supply side potable water, not wastewater. Gray Water/Sewage: Wastewater originating from a drain (sink, toilet, urinal).

MOLD RESPONSE AND REMEDIATION PLAN

HOW MUCH AIRFLOW IS NEEDED?

BUREAU OF ENVIRONMENTAL HEALTH Emergency Response/Indoor Air Quality Program

NORMI Professional Guidance for DIY Projects

How To Fix A Moldy House

Oakland Unified San Jose Unified Stanford University Santa Ana Unified Newhall Unified Clovis Unified Merced Union High School Grossmont Union High

Flooding Issues: Residential Housing

MOLD REMEDIATION KEY STEPS

Mould Mould A Basic Guide

Points of Construction

FIND IT! FIX IT! REPORT IT! Resolving Water Loss Claims

SERVPRO ECTP WATER MANUAL

DESERT RESEARCH INSTITUTE MOLD ASSESSMENT AND REMEDIATEION PROCEDURE

Emergency Response Program

Mold Management Plan Operations & Maintenance

Restoration Services Company

Factor Restoration. simplifying IT

UNIVERSITY OF TOLEDO

- WATER DAMAGE RESTORATION -

The Local Government Purchasing Cooperative

Unit FFL 1 Respond to requests for fire damage limitation work

City of Philadelphia Mold Remediation, Water Damage and Use of Biocides

TIMELY INFORMATION Flood Recovery

Preventing Long-Term Damage from Water Infiltration/Flooding in School Buildings

Restoring your Property: How to be prepared for Rapid Response to Flood Damage

MOLD REMEDIATION Kathleen Parrott, Ph.D. Professor of Housing, Virginia Tech

See reverse side for mold control tips

MOLD FAQs. 1. What is mold and where does it live? 2. How can mold affect my health?

APPENDIX B. EPA s Investigating, Evaluating, and Remediating Moisture and Mold Problems (see EPA website for complete details)

Molds and mildew are fungi that grow

Water should be removed as soon as possible once the safety of the structure has been verified.

Question and Answer Guide for FIRE DAMAGE MITIGATION

NZQA registered unit standard version 4 Page 1 of 5

IMPORTANT INFORMATION. Question and Answer Guide For Water damage. Thank you for choosing Catamount Carpet Cleaning, Inc.

Mold. Clean Up, Removal, Safety Concerns

Mold Remediation Practices

INDOOR WATER INTRUSION (INDOOR WATER LINE BREAKS) Region 8 Sustainability & Environmental Management System

Genett Group, Inc. Genett Group, Inc. Anti Microbial Technology. Hospitality Schools Hospitals Construction Remediator Assessor

May 14, Write Your Own (WYO) Principal Coordinators and the National Flood Insurance Program (NFIP) Direct Servicing Agent

Indoor Flood Cleanup and Mold Remediation Standard Operating Procedure (SOP)

Government Commercial Residential. CA License # NV License #

Question and Answer Guide for

March Get The Mold Out: Mold Clean-Up Guidance for Residences. Introduction

REASONS. Like it never even happened. To Choose SERVPRO for Your Commercial Property s Fire or Water Damage Cleanup and Restoration.

DRY OUT YOUR HOME. 2. Mud, silt, and unknown contaminants in the water not only get everything dirty; they are also unhealthy.

Water Damage & Catastrophic Water Loss

Quick, Low-Cost Water Dry-Out Techniques for Schools & Commercial Buildings Under Construction Case Study #3 Duration: 1-2 hours

CLOSED CRAWLSPACES. Have you ever been in your crawlspace? If not, have you ever even

Mold In Your Home and at Work

Question: Can a gymnasium floor be restored after being exposed to water damage?

Instructions For Use

It is a violation of U.S. Federal Law to use this product in a manner inconsistent with its labeling.

Safety Policy Manual Policy No. 112

Transcription:

WHEN IT RAINS, IT POURS WATER DAMAGE RESTORATION SUMMARY Damage to a facility from water can come in many forms. From a sprinkler malfunction to a hurricane, water damage can damage and destroy a building and its contents. Can a facility ever return to normal? Are any of the contents salvageable? WHY DOES IT MATTER? Water is extremely damaging to most common materials like wood, paper, building materials and electronics. If water can be removed from contact with affected items, damage can be reduced. If items are left in standing water, they will continue to deteriorate even after surface water is removed. Floodwaters are often mixed with sewage, animal waste, fertilizers and industrial waste. When working in a flood, workers should consider the water a biohazard. Additionally, mold and mildew can cause irreparable damage to building materials and building contents even after all the standing water is gone. WHAT CAN BE DONE? Restoration to flood damaged facilities and contents, including paper documents, is possible. By removing excess water, reducing the moisture content of the building through dehumidification and decontamination of contents and building materials, a facility can return to operation and minimize losses following water damage. Even BMS CAT customers who suffered extreme losses following Hurricane Katrina were able to salvage facilities and some contents. Some of those facilities sat under water for weeks following the storm.

CONSIDERATIONS The source of the water is a health and safety consideration. For restoration, water is placed in three general classifications: Category 1 "Clean" Water No substantial harm to humans Broken pipes & appliance malfunctions Does not usually stay "clean" after it mixes with contaminates Category 2 "Grey" Water Significant degree of contamination Overflows from diswashers, washing machines, etc. Will begin to alter with time and temperature changes Category 3 "Black" Water Always contains pathogenic agents Grossly unsanitary Large quantites of sewage, seawater & riverwater/lakewater Very common Heath & Safety considerations When water damages occur they can go through five stages if not treated properly and quickly. Water migrates horizontally from the source in all directions. Given time, water penetrates over, under and through the bottom plates of walls into adjoining rooms. Finally, water wicks up vertically, moving up walls, framing and insulation. As wood and other hygroscopic materials become saturated, they begin to swell. Hardwood floors begin to buckle; particle board sub-flooring will warp, buckle and delaminate. Even plywood will delaminate if left wet long enough. As standing water evaporates, the humidity increases. Gradually, doors, drawers, woodcarvings, acoustical ceiling tiles and even drywall not directly in the path of the primary water damage begin to swell, deform, buckle and delaminate. Draperies and upholstery develop water rings as water comes into contact with these materials and begin to wick up the fabric. In time, fungi and bacteria spores germinate and multiply in organic materials. As fungi damage continues, indoor air quality degrades rapidly. Bacteria, fungi and viruses become hyperactive.

HEALTH & SAFETY Health and safety evaluations should be performed for each water loss. In general, individuals who may come in contact with water damaged materials should have current tetanus shots and protect hands, eyes and mouth using personal protective equipment. Biocide chemicals used to kill microorganisms can be potentially harmful to humans and can cause respiratory injury. Instructions for application and dilutions of antimicrobial agents should be carefully followed. DRYING TYPES Rapid response and proper restoration will help restore the structure and contents and minimize the need for additional repairs and replacements. There are four basic principles to drying and restoring water-damaged materials back to their condition prior to the damage: Water Extraction: Removal of excess water from the damaged surfaces using wet vacuuming equipment, submersible pumps, mopping and soaking up the excess moisture. Evaporation: Once the excess water is removed the remaining moisture needs to evaporate or change from a liquid to a vapor. This can occur more quickly with air moving equipment. Dehumidification: Once the moisture from the structure and content materials has evaporated into the air, it must be removed by dehumidification. Dehumidification is the process of removing moisture from the air. Temperature Control: This is important because both evaporation and dehumidification are enhanced by controlling the temperature in the affected area; plus microorganism growth is temperature related.

THE RESTORATION In order to minimize the damage that has already occurred, basic emergency services steps must be taken: Extract standing water Remove debris and any saturated carpeting and padding Treat with antimicrobial agent Install air movers and dehumidification equipment Protect contents that are unaffected by either covering, elevating or removing Remove contents that may be contaminated WHAT CAN YOU DO? If there is any advance notice of potential water damage, all possible protective measures should be taken such as covering items with plastic, raising furniture and protecting electronics. Additionally, consider permanent storage of certain valuable items (rare books, historical newspapers or long term archival documents) in buffered, acid free storage boxes. If you have experienced water damage you can begin to mitigate the loss by: o Keeping the indoor temperature below 70 if safe o Turn off electricity to affected areas o If you cannot stop the flow of water, contact a plumber o Freeze paper items to stop detrition It is important to have a plan in place for a disaster. It is highly recommended that you pre-contract with a restoration company before a loss occurs. This gets any administrative red tape out of the way, expedites response times and allows you to carefully pre-qualify the service for your exact needs. BMS CAT offers a Response Service Agreement at no cost.