PRODUCT CATALOG 2014/15

2 DENTAL RATIO DENTAL RATIO stands for high quality at constantly fair prices made in Germany, by Hager & Meisinger. Our success is based on this consistent concept. And our users can rely on it. Many thanks for believing in us! Welcome to

DENTAL RATIO 3 CONTENT General information 4 Implant types and color codes 5 Symbol summary 6 Implant package 7 About DENTAL RATIO 8 Additional Products 8 OKTAGON Implant system 9 OKTAGON TISSUE LEVEL TISSUE LEVEL Implants and Restoration options 10 Indications TISSUE LEVEL 12 SURGICAL TISSUE LEVEL RP TL RP Implants Ø 3.3/Ø 4.1/Ø 4.8 mm 14 TD Implants Ø 4.1 mm 20 PROSTHETICS TISSUE LEVEL RP TL RP Standard 22 TL RP Solid Abutments 26 TL RP Ball Attachments 26 TL RP ALLIGATOR 28 SURGICAL TISSUE LEVEL WP TL WP Implants Ø 4.8 mm 30 PROSTHETICS TISSUE LEVEL WP TL WP Standard 32 OKTAGON BONE LEVEL BONE LEVEL Implants and Restoration options 34 Indications BONE LEVEL 36 SURGICAL BONE LEVEL NC BL NC Implants Ø 3.3 mm 38 PROSTHETICS BONE LEVEL NC BL NC Standard 40 BL NC ALLIGATOR 42 SURGICAL BONE LEVEL RC BL RC Implants Ø 4.1/Ø 4.8 mm 44 PROSTHETICS BONE LEVEL RC BL RC Standard 48 BL RC ALLIGATOR 50 ACCESORIES OKTAGON Instruments and Tools 52 OKTAGON Surgical kit mini 54 OKTAGON Surgical kit 56 INFORMATION 5 th ANNUAL HIGH COMPREHENSIVE IMPLANT SYMPOSIUM 58 Torque Values and Speeds 60 Materials 61 Manufacturer information 62 Guarantee & General Terms and conditions 66

4 DENTAL RATIO GENERAL INFORMATION GENERAL USE OF PRODUCTS Users of DRS International GmbH (hereinafter referred to as DENTAL RATIO) dental implants, and the other products distributed by DENTAL RATIO, must have knowledge of these products and information on how to handle them safely and expertly as described in the instructions for use. DENTAL RATIO products must always be used in accordance with the instructions for use provided. The user is obliged to use the product according to these instructions and ensure that it is indicated for the patient s specifi c situation. AVAILABILITY Some of the DENTAL RATIO products shown in this document may not be available in all countries. VALIDATION Upon publication of this catalog, all previous versions cease to be valid. PRODUCTION Made in Germany by Hager & Meisinger, a guarantee for high-grade medical products over the past 125 years. PRODUCT INFORMATION Further information on DENTAL RATIO products is available from your local sales representative or the download section at http://www.dental-ratio.de TRADEMARKS OKTAGON is a registered trademark of DRS International GmbH. NOTE All details descriptions, drawings or pictures in this product catalog are simply intended to describe the products and are non-binding. DENTAL RATIO assumes no liability for the veracity of the information. Changes and errors remain reserving.

DENTAL RATIO 5 IMPLANT TYPES AND COLOR CODES SYSTEM PLATFORM ENDOSSEOUS Ø PLATFORM Ø TISSUE LEVEL RP Regular Platform Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm TD Tapered Design Ø 4.1 mm Ø 4.8 mm Ø 4.8 mm Ø 6.5 mm GENERAL WP Wide Platform Ø 4.8 mm Ø 3.3 mm BONE LEVEL NC Narrow Connect Ø 3.3 mm RC Regular Connect Ø 4.1 mm Ø 4.8 mm Ø 4.1 mm Ø 4.8 mm COLOR CODES Yellow Endosseous implant diameter 3.3 mm Red Endosseous implant diameter 4.1 mm Green Endosseous implant diameter 4.8 mm

6 DENTAL RATIO SYMBOLS GENERAL g h Batch number Article number MIX Verpackung FSC C007413 GFA certifi cation symbol denoting compliance with the Forest Stewardship Council for product packaging (FSC ) standard. IK L Gamma rays with at least 25 kgy (2.5 Mrad) Only sterile if the packaging is undamaged C 0044 xxxx identifi es the notifi ed body of the manufacturer Y D i H Store the packaging appropriately For single-use only Please refer to instructions manuel Shelf-life: 5 years. Use before: YYYY-MM only CAUTION: Federal law (U.S.A.) restricts this product to sale by or on the order of a dentist or physician

DENTAL RATIO 7 IMPLANT PACKAGE GENERAL Ø 4.8 mm L 12 mm RP 4.8 mm ART.NR 84DRSOKT01 OKTAGON 0824 OKTAGON IK L Y D i H Gammastrahlen mit mind. 25 kgy (2,5 Mrad) Sterilized with gamma radiation min. 25 kgy (2.5 mrad) Stériliser par rayons gamma min. 25 kgy (2,5 mrad) Esterilizado con rayons gamma minimo 25 kgy (2,5 mrad) Nur steril, wenn Packung unbeschädigt Sterility not guaranteed if package is broken Uniquement stérile, si l emballage intact Solo esteril si el embalaje no esta defectuoso Rot, wenn sterilisiert Red, if sterilized Rouge, si stérile Rojo, cuando esta esterilizado Packung sachgerecht lagern Store under appropriate conditions A stocker correctement Almacenar embalaje adecuadamente Nur zum einmaligen Gebrauch For disposable use only Pour usage unique Para uso unico Gebrauchsanweisung beachten! Consider directions for use! Remarquez le mode d emploie! Ver manual de usario! Haltbarkeit 5 jahre, verwendbar bis Valid for 5 years, expiry date Durée de stérilité 5 ans, utilisable jusque Periodo canucidad 5 anos, ultizable hasta RP OKTAGON Implant Ø 4.8 mm L=12 mm 1 pc. h 50348 g AXXXXX H 2018-08 ETIKETT 50 x 25 mm Ø 4.8 mm L 12 mm RP 4.8 mm TL RP TL RP TISSUE LEVEL REGULAR PLATFORM MIX Verpackung FSC C007413 PRODUCED BY MADE IN GERMANY only VORSICHT: Gemäss dem US Bundesgesetz dar f d ieses Produkt nur an ausgebildete Mediziner ode r i n deren Auftrag verkauft werden. HAGER & MEISINGER GMBH, WWW.MEISINGER.DE C AUTION: Federal law (U.S.A.) restricts this produ ct t o sale by or on the order of a dentist or physici an. 0044 WWW.DENTAL-RATIO.DE ART. NR 84DRSOKT01

8 DENTAL RATIO is specialised in dental implantology and supplies patent-free products at economical prices for maxillofacial surgeons, oral surgeons, dental practitioners and dental technicians including a broad range of prosthetic solutions. GENERAL BUY SMART is the DENTAL RATIO motto and stands for the link between high product quality and the intelligent use of resources and procedures for cost-effective products. Our aim is to improve the healthcare and quality of life of as many patients as possible by providing them with high-grade, yet fairly priced, dental medical products. QUALITY MADE IN GERMANY Our objective is the development, optimisation and supply of high-grade medical-technical materials and procedures. Well-known specialists in implantology provide DENTAL RATIO with professional and scientifi c counselling and support. Together with Hager & Meisinger, a manufacturer renowned for proven quality, DENTAL RATIO generates advantageous prices which are passed straight to the customer. Within the highly specialised and constantly growing implantology/surgery market, professional competence and acceptance by users are decisive factors for the long-term success of our systems. REASONABLE PRICES FOR DENTAL PROFESSIONALS AND PATIENTS Considering the continually increasing costs in the healthcare system, high quality products at fair prices play a vast role in providing good healthcare. The economic effi ciency of DENTAL RATIO benefi ts dental professionals and patients. COMPETENT COUNSELLING Our team has many years of experience in oral implantology. We use our entire expertise to advise you according to your own specifi c needs. ADDITIONAL PRODUCTS To extend the surgical and prosthetic possibilities we offer the following add-on products: SafeScraper COREFLON PTFE Suture LOCATOR Hybrid prostheses restoration DESS Products ALTUS Further product information can be found at http://www.dental-ratio.de/downloads REGENERATION The team at DRS International GmbH would be pleased to provide you with information on the NanoBone product line with regard to new dimensions in bone augmentation. NanoBone is a synthetic bone substitute and bone augmentation material respectively. The secret of its success lies in the high performance nano structure: nano crystalline hydroxylapatite (HA) is embedded into an extremely porous silica gel matrix.

DENTAL RATIO 9 OKTAGON IMPLANT SYSTEM Our OKTAGON implant system employs proven implantological concepts from daily practice and combines simplicity with versatility. The OKTAGON implant system consists of grade 4, pure titanium and is available in TISSUE LEVEL and BONE LEVEL versions. Tissue Level implants are connected to the prosthetic restoration via an 8 inner cone with additional octagonal rotation stop. GENERAL Bone Level implants are connected via a 15 inner cone and internal grooves whereby an octagonal geometry of the abutment secures the prosthetic components in position. * Data on File REM (x 5000) endosteal surface sand-blasted and acid etched The macro-roughness exhibits a roughness profi le of 20 to 40 µm with micro-roughness of 2.0 to 4.0 µm. The surfaces in the endosteal section are sandblasted with corundum (> 99% Al 2 O 3 = aluminium oxide) and acid-etched.

10 DENTAL RATIO OKTAGON TISSUE LEVEL IMPLANTS TISSUE LEVEL TL * Cover screw 31154 sterilized incl. ** Cover screw 93730 sterilized incl. TISSUE LEVEL OVERVIEW RP Ø 3.3 mm RP Ø 4.1 mm L 8.0 mm L 10.0 mm L 12.0 mm L 14.0 mm L 8.0 mm L 10.0 mm L 12.0 mm L 14.0 mm 72186* 72187* 72199* 72267* 31151* 31152* 31153* 82647* Coverscrews Coverscrews small large small large 31154 31155 31154 31155 Healing abutments Healing abutments GH 2.0 mm GH 3.0 mm GH 4.5 mm GH 2.0 mm GH 3.0 mm GH 4.5 mm 35683 35736 35751 35683 35736 35751 RP Ø 4.8 mm L 8.0 mm L 10.0 mm L 12.0 mm L 14.0 mm 50125* 50347* 50348* 50550* Coverscrews small large 31154 31155 Healing abutments GH 2.0 mm GH 3.0 mm GH 4.5 mm 35683 35736 35751 TD Ø 4.1 mm L 10.0 mm L 12.0 mm 38150* 38415* Coverscrews small large 31154 31155 Healing abutments GH 2.0 mm GH 3.0 mm GH 4.5 mm 35683 35736 35751 L 8.0 mm 93727** GH 2.0 mm 93731 WP Ø 4.8 mm L 10.0 mm L 12.0 mm 93728** 93729** Coverscrews small 93730 Healing abutments GH 3.0 mm GH 4.5 mm 93732 93733

DENTAL RATIO 11 RESTORATION OPTIONS Singlecrown Telescope RESTORATION OPTIONS Bar Bridge Solid Abutment Ball attachments Alligator/ Locator Note 1) 2) 2) 1) 2) 2) 1) 2) 2) 1) Bar restoration on 4 implants 2) As bridge abutment, splinted with an implant Ø 4.1/4.8 mm 1) 2) 2)

12 DENTAL RATIO INDICATIONS TISSUE LEVEL Implant-Ø 3.3 mm 4.1 mm 4.8 mm Lengths mm 8 10 12 14 8 10 12 14 8 10 12 14 Platform RP x x x x x x x x x x x x RP/TD x x WP x x x TISSUE LEVEL INDICATIONS REGULAR PLATFORM (RP) OKTAGON 3.3 mm Ø RP implants are an alternative option for cases with a minimum jaw width of 5.5 mm and a mesiodistal gap of at least 7 mm between adjacent teeth. As their mechanical strength is lower than that of the 4.1 mm Ø implants, these implants should only be used for the following indications: EDENTULOUS JAW 4 Implants Ø 3.3 mm RP in combination with a bar. PARTIALLY DENTATE JAW Fixed restorations on 4.1 mm Ø implants should be splinted with a superstructure. OKTAGON Implants Ø 4,1 mm RP are an alternative option for cases with a minimum jaw width of 6.0 mm and a mesiodistal gap of 7.0 mm between adjacent teeth. OKTAGON Implants Ø 4.8 mm RP are an alternative option for cases with a minimum jaw width of 7.0 mm and a mesiodistal gap of 7.0 mm between adjacent teeth. SPECIFICATIONS RP REGULAR PLATFORM Implant-Ø mm 3.3 4.1 4.8 Platform-Ø mm 4.8 Height mm 1.8 Polished Neck Pitch mm 1.0 1.25 1.25 Outer-Ø mm 3.3 4.1 4.8 Inner-Ø mm 2.8 3.5 4.2

DENTAL RATIO 13 TAPERED DESIGN (TD) IMMEDIATE AND EARLY IMPLANTATION Thanks to its geometry, the Tapered Design Implant combines the specifi c advantages of cylindrical and conical implants. The coronal section of this implant has a 1.8 mm high smooth surface and, due to its geometry, respects both the biological width as well as an extended range of indications. Depending on the surgical evaluation, this type of implant can be placed transgingivally, semigingivally or subgingivally thus providing for fl exible soft tissue management. INDICATION Mostly for immediate (same day as extraction) and early implantation (6-8 weeks post extraction). SPECIFICATIONS TD REGULAR PLATFORM Implant-Ø mm 4.1 Platform-Ø mm 4.8 Height mm 1.8 Polished Neck Pitch mm 0.8 Outer-Ø mm 4.8 Inner-Ø mm 3.5 TISSUE LEVEL INDICATIONS WIDE PLATFORM (WP) OKTAGON Implants Ø 4.8 mm WP are for cases where the jaw exceeds 7.0 mm in width and a mesiodistal gap of 8.5 mm between adjacent teeth. They are mainly indicated for restoring teeth with wider diameter cervical sections and are suitable for broader alveolar ridges and interdental spaces. SPECIFICATIONS WP WIDE PLATFORM Implant-Ø mm 4.8 Platform-Ø mm 6.5 Height mm 1.8 Polished Neck Pitch mm 1.25 Outer-Ø mm 4.8 Inner-Ø mm 4.2

14 DENTAL RATIO TISSUE LEVEL SURGICAL TL RP IMPLANT Ø 3.3 mm Cover screw sterilized 31154 incl. Regular Platform Ø 4.8 mm Height Polished Neck 1.8 mm Implants Gauges Drills Endosseous Ø 3.3 mm Parallel pins Round bur (max. 800 min 1 ) 72186 Ø 3.3 mm L 8.0 mm 31061 Ø 2.2 mm, L 33 mm TISSUE LEVEL SURGICAL RP 72187 Ø 3.3 mm L 10.0 mm Pilot drill and drill extension see page 30 72199 Ø 3.3 mm L 12.0 mm 72267 Ø 3.3 mm L 14.0 mm 79575 Ø 2.0/3.0 mm Depth gauge Twist drills (max. 800 min 1 ) 38120 Ø 2.2 mm, L 33 mm 38121 Ø 2.2 mm, L 41 mm 64557 Ø 2.0 mm, L 25 mm Twist drills (max. 600 min 1 ) 38149 Ø 2.8 mm, L 33 mm 38148 Ø 2.8 mm, L 41 mm

DENTAL RATIO 15 Countersinks Instruments Cover screws and Healing abutments Countersinks (max. 400 min 1 ) Taps (max. 15 min 1 ) Cover screws Ø 2.8 mm, L 25 mm 95267 Ø 3.3 mm, L 33 mm 31154 small 72268 Ø 3.3 mm, L 42 mm 31155 large Healing abutments 35683 GH 2.0 mm 35736 GH 3.0 mm 35751 GH 4.5 mm TISSUE LEVEL SURGICAL RP

16 DENTAL RATIO TISSUE LEVEL SURGICAL TL RP IMPLANT Ø 4.1 mm Cover screw sterilized 31154 incl. Regular Platform Ø 4.8 mm Height Polished Neck 1.8 mm Implants Gauges Drills Endosseous Ø 4.1 mm Parallel pins Round bur (max. 800 min 1 ) 31151 Ø 4.1 mm L 8.0 mm 31061 Ø 2.2 mm, L 33 mm TISSUE LEVEL SURGICAL RP 31152 Ø 4.1 mm L 10.0 mm Pilot drill and drill extension see page 30 31153 Ø 4.1 mm L 12.0 mm 82647 Ø 4.1 mm L 14.0 mm 79575 Ø 2.0/3.0 mm Depth gauge Twist drills (max. 800 min 1 ) 38120 Ø 2.2 mm, L 33 mm 38121 Ø 2.2 mm, L 41 mm 64557 Ø 2.0 mm, L 25 mm Twist drills (max. 600 min 1 ) 38149 Ø 2.8 mm, L 33 mm 38148 Ø 2.8 mm, L 41 mm Depth gauge Twist drills (max. 500 min 1 ) 38135 Ø 3.5 mm, L 33 mm 38136 Ø 3.5 mm, L 41 mm 64556 Ø 3.0 mm, L 25 mm

18 DENTAL RATIO TISSUE LEVEL SURGICAL TL RP IMPLANT Ø 4.8 mm Cover screw sterilized 31154 incl. Regular Platform Ø 4.8 mm Height Polished Neck 1.8 mm Implants Gauges Drills Endosseous Ø 4.8 mm Parallel pins Round bur (max. 800 min 1 ) 50125 Ø 4.8 mm L 8.0 mm 31061 Ø 2.2 mm, L 33 mm TISSUE LEVEL SURGICAL RP 50347 Ø 4.8 mm L 10.0 mm Pilot drill and drill extension see page 30 50348 Ø 4.8 mm L 12.0 mm 50550 Ø 4.8 mm L 14.0 mm 79575 Ø 2.0/3.0 mm Depth gauge Twist drills (max. 800 min 1 ) 38120 Ø 2.2 mm, L 33 mm 38121 Ø 2.2 mm, L 41 mm 64557 Ø 2.0 mm, L 25 mm Twist drills (max. 600 min 1 ) 38149 Ø 2.8 mm, L 33 mm 38148 Ø 2.8 mm, L 41 mm Depth gauge Twist drills (max. 500 min 1 ) 38135 Ø 3.5 mm, L 33 mm 38136 Ø 3.5 mm, L 41 mm 64556 Ø 3.0 mm, L 25 mm Twist drills (max. 400 min 1 ) 38151 Ø 4.2 mm, L 33 mm 38152 Ø 4.2 mm, L 41 mm

20 DENTAL RATIO TISSUE LEVEL SURGICAL (TAPERED DESIGN) TL RP/TD IMPLANT Ø 4.1 mm Cover screw sterilized 31154 incl. Regular Platform Ø 4.8 mm Height Polished Neck 1.8 mm Implants Gauges Drills Endosseous Ø 4.1 mm Parallel pins Round bur (max. 800 min 1 ) 38150 Ø 4.1 mm L 10.0 mm 31061 Ø 2.2 mm, L 33 mm TISSUE LEVEL SURGICAL RP TD 38415 Ø 4.1 mm L 12.0 mm Pilot drill and drill extension see page 30 79575 Ø 2.0/3.0 mm Depth gauge Twist drills (max. 800 min 1 ) 38120 Ø 2.2 mm, L 33 mm 38121 Ø 2.2 mm, L 41 mm 64557 Ø 2.0 mm, L 25 mm Twist drills (max. 600 min 1 ) 38149 Ø 2.8 mm, L 33 mm 38148 Ø 2.8 mm, L 41 mm Depth gauge Twist drills (max. 500 min 1 ) 38135 Ø 3.5 mm, L 33 mm 38136 Ø 3.5 mm, L 41 mm 64556 Ø 3.0 mm, L 25 mm

DENTAL RATIO 21 Countersinks Instruments Cover screws und Healing abutments Countersinks (max. 400 min 1 ) Taps (max. 15 min 1 ) Cover screws 93740 Ø 3.5 mm, L 37 mm 95264 Ø 4.1 mm, L 23 mm 31154 small 31155 large Healing abutments 35683 GH 2.0 mm 35736 GH 3.0 mm 35751 GH 4.5 mm TISSUE LEVEL SURGICAL RP TD

22 DENTAL RATIO TISSUE LEVEL PROSTHETICS RP STANDARD Impression open tray 31156 63978 TISSUE LEVEL PROSTHETICS RP Single crown Impression closed tray Model 64551 31157 64553 31158 55283 } * 84957 31164 screwed 31166 31160 82648 } * 82649 82689 63978 31160 Single crown 64551 38118 64553 38117 38122 cementable 38123 38124 38125 82689 31161 31163 } * * only to use combined

DENTAL RATIO 23 Article-No. Product Article-No. Product 31156 TL RP Impression cap with integral guide screw (open tray) 31158 TL RP Impression cap with integral guide screw (closed tray) 55283 TL RP Impression cap (snap-on) 82649 TL RP Abutment angled, 15 B H 6.7 mm, screwed/cementable 38117 TL RP Abutment angled, 15 B H 6.7 mm, cementable, parallel 38123 TL RP Abutment angled, 15 B H 6.7 mm, cementable, conical 84957 TL RP Positioning cylinder red 38119 TL RP Abutment angled, 20 A H 6.7 mm, cementable, parallel 31157 TL RP Implant analog 38124 TL RP Abutment angled, 20 A H 6.7 mm, cementable, conical 31161 TL RP Abutment, H 5.5 mm cementable 84960 incl. 84960 TL RP Basic screw for 31161 31162 TL RP Plastic coping bridge/bar for 31161 31163 TL RP Plastic coping crown for 31161 31164 TL RP Abutment H 1.5 mm, screwed 31165 TL RP Plastic coping bridge/bar for 31164 31166 TL RP Plastic coping crown for 31164 82648 TL RP Abutment angled, 15 A H 6.7 mm, screwed/cementable 38118 TL RP Abutment angled, 15 A H 6.7 mm, cementable, parallel 38122 TL RP Abutment angled, 15 A H 6.7 mm, cementable, conical 38116 TL RP Abutment angled, 20 B H 6.7 mm, cementable, parallel 38125 TL RP Abutment angled, 20 B H 6.7 mm, cementable, conical 82689 TL RP Plastic shoulder for Abutment, angled, 15 /20 40100 TL RP Abutment, excl. 31025 2 pcs. multifunctional (PSU) 31025 TL RP Fixation screw HEX/OKT for 40100 57040 TL RP Abutment Titanium-adhesive base 57041 TL RP Abutment Titanium-adhesive base, incl. 57042 57042 TL RP Basic screw for 57041 57043 TL RP Basic screw for CAD/CAM 31160 TL RP/WP Occlusal screw for 31164 and 93720 TISSUE LEVEL PROSTHETICS RP ABUTMENTS ANGLED VERSIONS A + B Choice of optimal version for individual care Version A Bending over the edge of the OKTAGON Marked by one point. Version B Bending over the surface of the OKTAGON Marked by two points. A = Bending over edge Marked: one point B = Bending over surface Marked: two points

24 DENTAL RATIO TISSUE LEVEL PROSTHETICS RP STANDARD Impression open tray 31156 63978 TISSUE LEVEL PROSTHETICS RP Telescope/Bar Impression closed tray Telescope Model 64551 31157 64553 31158 55283 84957 31164 31166 31160 40100 } * } * 31025 57041 63978 57042 Hybrid 64551 64553 31164 Bar - 31165 31160 40100 31025 } * 57040 57041 57042 * only to use combined

DENTAL RATIO 25 Article-No. Product Article-No. Product 31156 TL RP Impression cap with integral guide screw (open tray) 31158 TL RP Impression cap with integral guide screw (closed tray) 55283 TL RP Impression cap (snap-on) 82649 TL RP Abutment angled, 15 B H 6.7 mm, screwed/cementable 38117 TL RP Abutment angled, 15 B H 6.7 mm, cementable, parallel 38123 TL RP Abutment angled, 15 B H 6.7 mm, cementable, conical 84957 TL RP Positioning cylinder red 38119 TL RP Abutment angled, 20 A H 6.7 mm, cementable, parallel 31157 TL RP Implant analog 38124 TL RP Abutment angled, 20 A H 6.7 mm, cementable, conical 31161 TL RP Abutment, H 5.5 mm cementable 84960 incl. 84960 TL RP Basic screw for 31161 31162 TL RP Plastic coping bridge/bar for 31161 31163 TL RP Plastic coping crown for 31161 31164 TL RP Abutment H 1.5 mm, screwed 31165 TL RP Plastic coping bridge/bar for 31164 31166 TL RP Plastic coping crown for 31164 82648 TL RP Abutment angled, 15 A H 6.7 mm, screwed/cementable 38118 TL RP Abutment angled, 15 A H 6.7 mm, cementable, parallel 38122 TL RP Abutment angled, 15 A H 6.7 mm, cementable, conical 38116 TL RP Abutment angled, 20 B H 6.7 mm, cementable, parallel 38125 TL RP Abutment angled, 20 B H 6.7 mm, cementable, conical 82689 TL RP Plastic shoulder for Abutment, angled, 15 /20 40100 TL RP Abutment, excl. 31025 2 pcs. multifunctional (PSU) 31025 TL RP Fixation screw HEX/OKT for 40100 57040 TL RP Abutment Titanium-adhesive base 57041 TL RP Abutment Titanium-adhesive base, incl. 57042 57042 TL RP Basic screw for 57041 57043 TL RP Basic screw for CAD/CAM 31160 TL RP/WP Occlusal screw for 31164 and 93720 TISSUE LEVEL PROSTHETICS RP ABUTMENTS ANGLED VERSIONS A + B Choice of optimal version for individual care Version A Bending over the edge of the OKTAGON Marked by one point. Version B Bending over the surface of the OKTAGON Marked by two points. A = Bending over edge Marked: one point B = Bending over surface Marked: two points

26 DENTAL RATIO TISSUE LEVEL PROSTHETICS RP SOLID ABUTMENTS 81038 81083 81096 55668 55283 TISSUE LEVEL PROSTHETICS RP Single crown Bridge Solid abutments 55288 55299 55394 72088 55396 55397 55400 Crown 55487 Bridge 55478 BALL ATTACHMENTS 38087 38071 82758 Hybrid Driver 38073 89611 89612 89613

DENTAL RATIO 27 Article-No. Product Article-No. Product 81038 TL RP Solid abutment yellow, 6, H 4.0 mm 81083 TL RP Solid abutment grey, 6, H 5.5 mm 81096 TL RP Solid abutment blue, 6, H 7.0 mm 55478 TL RP Plastic coping for solid abutment, bridge 55487 TL RP Plastic coping for solid abutment, crown 55668 TL RP Solid abutment driver 6, L 15 mm, (S) 72088 TL RP Solid abutment driver 6, L 21 mm, (M) 55283 TL RP Impression cap (snap-on) 55288 TL RP Positioning cylinder yellow 55299 TL RP Positioning cylinder grey 55394 TL RP Positioning cylinder blue 55396 TL RP Solid abutment analog yellow 55397 TL RP Solid abutment analog grey 55400 TL RP Solid abutment analog blue TISSUE LEVEL PROSTHETICS RP Article-No. Product Article-No. Product 38087 TL RP Abutment ball attachment GH 0.0 mm 38071 TL RP Implant analog for ball attachment 38073 TL RP Ball attachment driver 82758 TL RP Matrix for ball attachment (incl. all O-Rings) 89611 TL RP O-Ring 70 shore red Pull-off weight light 89612 TL RP O-Ring 80 shore blue Pull-off weight medium 89613 TL RP O-Ring 90 shore black Pull-off weight strong

28 DENTAL RATIO TISSUE LEVEL PROSTHETICS RP ALLIGATOR Hybrid Impression 31156 2010.601 Model 31157 2010.611 63978 64551 2010.701 64553 2010.702 2010.731 TISSUE LEVEL PROSTHETICS RP 2010.710 2010.711 Impression 2010.722 2010.712 Model 2010.721 2010.713 2010.714 2010.715 2010.725 2010.731 98001 0 98002 98003 98004 2010.741 2010.751 75836 2010.703 Hybrid 2010.723 2010.724 63978 64551 64553 2010.101 15 98007 98008

DENTAL RATIO 29 Article-No. Product Article-No. Product 98001 TL RP ALLIGATOR Abutment GH 1.0 mm 98002 TL RP ALLIGATOR Abutment GH 2.0 mm 98003 TL RP ALLIGATOR Abutment GH 3.0 mm 98004 TL RP ALLIGATOR Abutment GH 4.0 mm 98007 TL RP ALLIGATOR Abutment angled, 15, H 1.5 mm 98008 TL RP ALLIGATOR Abutment angled, 15, H 3.0 mm 64551 OKTAGON Screwdriver one-piece, L 24 mm 75836 TL/BL ALLIGATOR Attachment driver, L 15 mm NOVALOC S W I S S M A D E 2010.101 Equipment box with 3 tools (excluding consumables) 2010.601 Processing package Titanium 2 pcs. Titanium matrix housing incl. PEEK mounting insert black Retention inserts white, yellow, green Mounting collar silicone 2010.611 Processing package PEEK 2 pcs. PEEK matrix housing incl. PEEK mounting insert black Retention inserts white, yellow, green Mounting collar silicone 2010.710 Retention insert red 4 pcs. PEEK, pull-off weight extra-light 2010.711 Retention insert white 4 pcs. PEEK, pull-off weight light 2010.712 Retention insert yellow 4 pcs. PEEK, pull-off weight medium 2010.713 Retention insert green 4 pcs. PEEK, pull-off weight strong 2010.714 Retention insert blue 4 pcs. PEEK, pull-off weight extra-strong 2010.715 Retention insert black 4 pcs. PEEK, pull-off weight ultra-strong 2010.731 Demounting tool for mounting inserts + model analogue reposition aid, blue 2010.741 Mounting and demounting tool for retention inserts, brown 2010.751 Matrix housing extractor grey 2010.703 Titanium matrix housing 4 pcs. with attachment option incl. PEEK mounting insert 2010.701 Titanium matrix housing 4 pcs. incl. PEEK mounting insert 2010.702 PEEK matrix housing 4 pcs. incl. PEEK mounting insert 2010.725 PEEK mounting insert 4 pcs. black 2010.721 Model analog 4 pcs. Aluminium 2010.722 Forming/fi xing matrix, red 4 pcs. PEEK 2010.723 Processing spacer, white 4 pcs. POM C 2010.724 Mounting collar 10 pcs. silicone TISSUE LEVEL PROSTHETICS RP

30 DENTAL RATIO TISSUE LEVEL SURGICAL TL WP IMPLANT Ø 4.8 mm Cover screw sterilized incl. Wide Platform Ø 6.5 mm Height Polished Neck 1.8 mm Implants Gauges Drills Endosseous Ø 4.8 mm Parallel pins Round bur (max. 800 min 1 ) 93727 Ø 4.8 mm L 8.0 mm 31061 Ø 2.2 mm, L 33 mm TISSUE LEVEL SURGICAL WP 93728 Ø 4.8 mm L 10.0 mm Pilot drill and drill extension see page 30 93729 Ø 4.8 mm L 12.0 mm 79575 Ø 2.0/3.0 mm Depth gauge Twist drills (max. 800 min 1 ) 38120 Ø 2.2 mm, L 33 mm 38121 Ø 2.2 mm, L 41 mm 64557 Ø 2.0 mm, L 25 mm Twist drills (max. 600 min 1 ) 38149 Ø 2.8 mm, L 33 mm 38148 Ø 2.8 mm, L 41 mm Depth gauge Twist drills (max. 500 min 1 ) 38135 Ø 3.5 mm, L 33 mm 38136 Ø 3.5 mm, L 41 mm 64556 Ø 3.0 mm, L 25 mm Twist drills (max. 400 min 1 ) 38151 Ø 4.2 mm, L 33 mm 38152 Ø 4.2 mm, L 41 mm

DENTAL RATIO 31 Countersinks Instruments Cover screws und Healing abutments Countersinks (max. 400 min 1 ) Taps (max. 15 min 1 ) Cover screws 93738 Ø 4.2 mm, L 25 mm 95266 Ø 4.8 mm, L 33 mm 93730 small 61314 Ø 4.8 mm, L 42 mm Healing abutments 93731 GH 2.0 mm 93732 GH 3.0 mm 93733 GH 4.5 mm TISSUE LEVEL SURGICAL WP

32 DENTAL RATIO TISSUE LEVEL PROSTHETICS WP STANDARD Impression 93734 Model 93735 63978 Single crown Bridge 64551 TISSUE LEVEL PROSTHETICS WP cementable screwed 64553 93736 93739 93737 93720 93721 Bridge/Bar 93722 Crown 31160

DENTAL RATIO 33 Article-No. Product Article-No. Product 93734 TL WP Impression cap with integral guide screw (open tray) 93739 TL WP Abutment angled, 15 A H 5.5 mm, cementable 93735 TL WP Implant analog 93737 TL WP Abutment angled, 15 B H 5.5 mm, cementable 93720 TL WP Abutment H 1.5 mm, screwed 93736 TL WP Abutment H 5.5 mm, cementable 31160 TL RP/WP Occlusal screw for 31164 and 93720 93721 TL WP Plastic coping bridge/bar for 93720 93722 TL WP Plastic coping crown for 93720 TISSUE LEVEL PROSTHETICS WP ABUTMENTS ANGLED VERSIONS A + B Choice of optimal version for individual care Version A Bending over the edge of the OKTAGON Marked by one point. Version B Bending over the surface of the OKTAGON Marked by two points. A = Bending over edge Marked: one point B = Bending over surface Marked: two points

34 DENTAL RATIO OKTAGON BONE LEVEL IMPLANTS BONE LEVEL BL * Cover screw sterilized 22014 incl. ** Cover screw sterilized 22099 incl. Ø 3.6 mm Ø 4.8 mm L 8.0 mm 22009* GH 2.0 mm 22017 22020 NC Ø 3.3 mm L 10.0 mm L 12.0 mm L 14.0 mm 22010* 22011* 22012* Closurescrews GH 0.0 mm GH 0.5 mm 22013 22014 Healing abutments GH 3.5 mm GH 5.0 mm 22018 22021 22019 22022 Ø 5.0 mm Ø 6.5 mm Ø 7.0 mm BONE LEVEL SUMMARY RC Ø 4.1 mm RC Ø 4.8 mm L 8.0 mm L 10.0 mm L 12.0 mm L 14.0 mm L 8.0 mm L 10.0 mm L 12.0 mm L 14.0 mm 22001** 22002** 22003** 22004** 22005** 22006** 22007** 22008** Closurescrews Closurescrews GH 0.0 mm GH 0.5 mm GH 0.0 mm GH 0.5 mm 22098 22099 22098 22099 Healing abutments Healing abutments GH 2.0 mm GH 4.0 mm GH 6.0 mm GH 2.0 mm GH 4.0 mm GH 6.0 mm 22090 22093 22091 22094 22123 22092 22095 Ø 5.0 mm Ø 6.5 mm Ø 7.0 mm 22090 22093 22091 22094 22123 22092 22095

DENTAL RATIO 35 RESTORATION OPTIONS Singlecrown RESTORATION OPTIONS Telescope Bar Bridge Alligator/ Locator Note * * Insertion in the molar region is not recommended. Applies to all BL NC implants Ø 3.3 mm.

36 DENTAL RATIO INDICATIONS BONE LEVEL NARROW CONNECT (NC) Implant-Ø 3.3 mm Lengths mm 8 10 12 14 BL NC x x x x For bone level restorations in combination with subgingival and transgingival healing. 3.3 mm Ø Bone Level Implants are an alternative option for cases with a minimum jaw width of 6.0 mm and a mesiodistal gap of 5.0 mm between adjacent teeth. The BONE LEVEL NC implants Ø 3.3 mm are only to be restored in combination with the color-coded (yellow) NC abutments. Except ALLIGATOR and LOCATOR Abutments. BONE LEVEL INDICATIONS SPECIFICATIONS BL NC Implant-Ø mm 3.3 Platform-Ø mm 3.3 Pitch mm 0.8 Outer-Ø mm 3.3 Inner-Ø mm 2.8 Note The Countersink is used for a conical preparation of the implant site.

DENTAL RATIO 37 INDICATIONS BONE LEVEL REGULAR CONNECT (RC) Implant-Ø 4.1 mm 4.8 mm Lengths mm 8 10 12 14 8 10 12 14 BL RC x x x x x x x x For bone level restorations in combination with subgingival and transgingival healing. 4.1 mm Ø Bone Level Implants are an alternative option for cases with a minimum jaw width of 6.0 mm and a mesiodistal gap of 6.0 mm between adjacent teeth. 4.8 mm Ø Bone Level Implants are for cases with a minimum jaw width of 7.0 mm and a mesiodistal gap of 7.0 mm between adjacent teeth. The BONE LEVEL NC implants Ø 3.3 mm are only to be restored in combination with the color-coded (magenta) NC abutments. Except ALLIGATOR and LOCATOR Abutments. SPECIFICATIONS BL RC Implant-Ø mm 4.1 4.8 Platform-Ø mm 4.1 4.8 Pitch mm 0.8 0.8 Outer-Ø mm 4.1 4.8 Inner-Ø mm 3.5 4.2 BONE LEVEL INDICATIONS Note The Countersink is used for a conical preparation of the implant site.

38 DENTAL RATIO BONE LEVEL SURGICAL BL NC IMPLANT Ø 3.3 mm Cover screw sterilized 22014 incl. Implants Gauges Drills Endosseous Ø 3.3 mm Parallel pins Round bur (max. 800 min 1 ) 22009 Ø 3.3 mm L 8.0 mm 31061 Ø 2.2 mm, L 33 mm 22010 Ø 3.3 mm L 10.0 mm Pilot drill and drill extension see page 30 22011 Ø 3.3 mm L 12.0 mm 22012 Ø 3.3 mm L 14.0 mm 79575 Ø 2.0/3.0 mm Depth gauge Twist drills (max. 800 min 1 ) 38120 Ø 2.2 mm, L 33 mm 38121 Ø 2.2 mm, L 41 mm BONE LEVEL SURGICAL NC 64557 Ø 2.0 mm, L 25 mm Twist drills (max. 600 min 1 ) 38149 Ø 2.8 mm, L 33 mm 38148 Ø 2.8 mm, L 41 mm

DENTAL RATIO 39 Countersinks Instruments Cover screws und Healing abutments Countersinks (max. 300 min 1 ) Taps (max. 15 min 1 ) Cover screws 22136 Ø 3.3 mm, L 26 mm 22138 Ø 3.3 mm, L 23 mm 22013 GH 0.0 mm 22137 Ø 3.3 mm, L 35 mm 22014 GH 0.5 mm Healing abutments Ø 3.6 mm 22017 GH 2.0 mm 22018 GH 3.5 mm 22019 GH 5.0 mm Healing abutments Ø 4.8 mm 22020 GH 2.0 mm 22021 GH 3.5 mm 22022 GH 5.0 mm BONE LEVEL SURGICAL NC

40 DENTAL RATIO BONE LEVEL PROSTHETICS NC STANDARD Impression 22015 Model 22016 63978 Single crown Bridge 64551 64553 22025 22026 BONE LEVEL PROSTHETICS NC cementable 22027 22028 22029 22023 22024 22030 22043 } 22035 Bridge 22034 Crown

DENTAL RATIO 41 Article-No. Product Article-No. Product 22015 BL NC Impression cap, Ø 4.0 mm with integral guide screw (open tray) 22027 BL NC Abutment, 0, Ø 3.5 mm L 5.5 mm, GH 1.0 mm, cementable basic screw 22043 incl. 22016 BL NC Implant analog 22028 BL NC Abutment, 0, Ø 3.5 mm L 5.5 mm, GH 2.0 mm, cementable basic screw 22043 incl. 22025 BL NC Abutment, 18, Ø 3.5 mm L 6.0 mm, GH 1.5 mm, cementable basic screw 22030 incl. 22029 BL NC Abutment, 0, Ø 3.5 mm L 5.5 mm, GH 3.0 mm, cementable basic screw 22043 incl. 22026 BL NC Abutment, 18, Ø 3.5 mm L 6.0 mm, GH 3.0 mm, cementable basic screw 22030 incl. 22035 BL NC Burn-out plastic coping Ø 3.5 mm, for Bridge 22023 BL NC Abutment, 0, Ø 3.5 mm L 6.0 mm, GH 2.0 mm, cementable basic screw 22030 incl. 22024 BL NC Abutment, 0, Ø 3.5 mm L 6.0 mm, GH 3.5 mm, cementable basic screw 22030 incl. 22030 BL NC Basic screw L 7.85 mm 22034 BL NC Burn-out plastic coping Ø 3.5 mm, for Crown 22043 BL NC Basic screw L 7.85 mm 22032 BL NC Basic screw for CAD/CAM BONE LEVEL PROSTHETICS NC

42 DENTAL RATIO BONE LEVEL PROSTHETICS NC ALLIGATOR Hybrid Impression 22015 2010.601 Model 22016 2010.611 63978 64551 2010.701 64553 2010.702 2010.731 2010.710 2010.711 Impression 2010.722 2010.712 Model 2010.721 2010.713 2010.714 2010.715 2010.725 BONE LEVEL PROSTHETICS NC 22036 0 22037 22038 22039 75836 2010.731 2010.741 2010.751 2010.703 Hybrid 2010.723 63978 2010.724 64551 64553 2010.101 15 22041 22042

DENTAL RATIO 43 Article-No. Product Article-No. Product 22036 BL NC ALLIGATOR Abutment GH 2.0 mm 22037 BL NC ALLIGATOR Abutment GH 3.0 mm 22038 BL NC ALLIGATOR Abutment GH 4.0 mm 22039 BL NC ALLIGATOR Abutment GH 5.0 mm 22041 BL NC ALLIGATOR Abutment angled, 15, GH 3.0 mm 22042 BL NC ALLIGATOR Abutment angled, 15, GH 4.0 mm 22131 BL NC/RC ALLIGATOR basic screw for 22041/22042/22129/22130 64551 OKTAGON Screwdriver one-piece, L 24 mm 75836 TL/BL ALLIGATOR Attachment driver, L 15 mm NOVALOC S W I S S M A D E 2010.101 Equipment Box with 3 tools 2010.731, 2010.741, 2010.751 (excluding consumables) 2010.601 Processing package Titanium 2 pcs. Titanium matrix housing incl. PEEK mounting insert black Retention inserts white, yellow, green Mounting collar silicone 2010.611 Processing package PEEK 2 pcs. PEEK matrix housing incl. PEEK mounting insert black Retention inserts white, yellow, green Mounting collar silicone 2010.710 Retention insert red 4 pcs. PEEK, pull-off weight extra-light 2010.711 Retention insert white 4 pcs. PEEK, pull-off weight light 2010.712 Retention insert yellow 4 pcs. PEEK, pull-off weight medium 2010.713 Retention insert green 4 pcs. PEEK, pull-off weight strong 2010.714 Retention insert blue 4 pcs. PEEK, pull-off weight extra-strong 2010.715 Retention insert black 4 pcs. PEEK, pull-off weight ultra-strong 2010.731 Demounting tool for mounting inserts + model analogue reposition aid, blue 2010.741 Mounting and demounting tool for retention inserts, brown 2010.751 Matrix housing extractor grey 2010.703 Titanium matrix housing 4 pcs. with attachment option incl. PEEK mounting insert 2010.701 Titanium matrix housing 4 pcs. incl. PEEK mounting insert 2010.702 PEEK matrix housing 4 pcs. incl. PEEK mounting insert 2010.725 PEEK mounting insert 4 pcs. black 2010.721 Model analog 4 pcs. Aluminium 2010.722 Forming/fi xing matrix, red 4 pcs. PEEK 2010.723 Processing spacer, white 4 pcs. POM C 2010.724 Mounting collar 10 pcs. silicone BONE LEVEL PROSTHETICS NC

44 DENTAL RATIO BONE LEVEL SURGICAL BL RC IMPLANT Ø 4.1 mm Cover screw sterilized 22099 incl. Implants Gauges Drills Endosseous Ø 4.1 mm Parallel pins Round bur (max. 800 min 1 ) 22001 Ø 4.1 mm L 8.0 mm 31061 Ø 2.2 mm, L 33 mm 22002 Ø 4.1 mm L 10.0 mm Pilot drill and drill extension see page 30 22003 Ø 4.1 mm L 12.0 mm 22004 Ø 4.1 mm L 14.0 mm 79575 Ø 2.0/3.0 mm Depth gauge Twist drills (max. 800 min 1 ) 38120 Ø 2.2 mm, L 33 mm 38121 Ø 2.2 mm, L 41 mm BONE LEVEL SURGICAL RC 64557 Ø 2.0 mm, L 25 mm Twist drills (max. 600 min 1 ) 38149 Ø 2.8 mm, L 33 mm 38148 Ø 2.8 mm, L 41 mm Depth gauge Twist drills (max. 500 min 1 ) 38135 Ø 3.5 mm, L 33 mm 38136 Ø 3.5 mm, L 41 mm 64556 Ø 3.0 mm, L 25 mm

DENTAL RATIO 45 Countersinks Instruments Cover screws und Healing abutments Countersinks (max. 300 min 1 ) Taps (max. 15 min 1 ) Cover screws 22111 Ø 4.1 mm, L 26 mm 95264 Ø 4.1 mm, L 23 mm 22098 GH 0.0 mm 22113 Ø 4.1 mm, L 35 mm 22099 GH 0.5 mm Healing abutments Ø 5.0 mm 22090 GH 2.0 mm 22091 GH 4.0 mm 22092 GH 6.0 mm Healing abutments Ø 6.5 mm 22093 GH 2.0 mm 22094 GH 4.0 mm 22095 GH 6.0 mm BONE LEVEL SURGICAL RC Healing abutment Ø 7.0 mm temporary coping 22123 GH 4.0 mm

46 DENTAL RATIO BONE LEVEL SURGICAL BL RC IMPLANT Ø 4.8 mm Cover screw sterilized 22099 incl. Implants Gauges Drills Endosseous Ø 4.8 mm Parallel pins Round bur (max. 800 min 1 ) 22005 Ø 4.8 mm L 8.0 mm 31061 Ø 2.2 mm, L 33 mm 22006 Ø 4.8 mm L 10.0 mm Pilot drill and drill extension see page 30 22007 Ø 4.8 mm L 12.0 mm 22008 Ø 4.8 mm L 14.0 mm 79575 Ø 2.0/3.0 mm Depth gauge Twist drills (max. 800 min 1 ) 38120 Ø 2.2 mm, L 33 mm 38121 Ø 2.2 mm, L 41 mm BONE LEVEL SURGICAL RC 64557 Ø 2.0 mm, L 25 mm Twist drills (max. 600 min 1 ) 38149 Ø 2.8 mm, L 33 mm 38148 Ø 2.8 mm, L 41 mm Depth gauge Twist drills (max. 500 min 1 ) 38135 Ø 3.5 mm, L 33 mm 38136 Ø 3.5 mm, L 41 mm 64556 Ø 3.0 mm, L 25 mm Twist drills (max. 400 min 1 ) 38151 Ø 4.2 mm, L 33 mm 38152 Ø 4.2 mm, L 41 mm

DENTAL RATIO 47 Countersinks Instruments Cover screws und Healing abutments Countersinks (max. 300 min 1 ) Taps (max. 15 min 1 ) Cover screws 22114 Ø 4.8 mm, L 26 mm 95269 Ø 4.8 mm, L 23 mm 22098 GH 0.0 mm 22112 Ø 4.8 mm, L 35 mm 22099 GH 0.5 mm Healing abutments Ø 5.0 mm 22090 GH 2.0 mm 22091 GH 4.0 mm 22092 GH 6.0 mm Healing abutments Ø 6.5 mm 22093 GH 2.0 mm 22094 GH 4.0 mm 22095 GH 6.0 mm BONE LEVEL SURGICAL RC Healing abutment Ø 7.0 mm temporary coping 22123 GH 4.0 mm

48 DENTAL RATIO BONE LEVEL PROSTHETICS RC STANDARD 22096 Impression 22088 Model 22089 22097 63978 Single crown Bridge temporary 64551 22121 64553 22103 BONE LEVEL PROSTHETICS RC cementable 22105 22106 22107 22108 22109 22110 22115 22120 OKTAGON BONE LEVEL ABUTMENTS } } 22116 Bridge 22117 Crown 22118 Bridge 22119 Crown The conical joint between abutment and implant provides a safe support and power transmission of the abutment to the implant and ensures the tightness of the joint. The deep fi xture of the screw in the implant leads to a functional stress distribution and due to this provides a high breaking strength and endurance. The endurance of the joint is proved according to DIN EN ISO 14801 [Data on fi le]. NOTE The fabrication of a transmission key is recommended.

DENTAL RATIO 49 Article-No. Product Article-No. Product 22096 BL RC Impression cap, Ø 4.5 mm with integral guide screw (open tray) 22088 BL RC Impression cap, Ø 5.0 mm with integral guide screw (open tray) 22089 BL RC Impression cap, Ø 6.5 mm with integral guide screw (open tray) 22097 BL RC Implant analog 22121 BL RC Temporary coping 0, Ø 7.0 mm, customizable basic screw 22122 incl. 22122 BL RC basic screw also suiting for CAD/CAM 22103 BL RC Abutment, 18, Ø 5.0 mm L 8.0 mm, GH 1.5 mm, cementable incl. basic screw 22120 22105 BL RC Abutment, 18, Ø 5.0 mm L 8.0 mm, GH 3.0 mm, cementable incl. basic screw 22120 22106 BL RC Abutment, 0, Ø 5.0 mm L 6.0 mm, GH 1.0 mm, cementable incl. basic screw 22120 22107 BL RC Abutment, 0, Ø 5.0 mm L 6.0 mm, GH 2.0 mm, cementable incl. basic screw 22120 22108 BL RC Abutment, 0, Ø 5.0 mm L 6.0 mm, GH 4.0 mm, cementable incl. basic screw 22120 22116 BL RC Burn-out plastic coping Ø 5.0 mm, for Bridge 22109 BL RC Abutment, 0, Ø 6.5 mm L 6.0 mm, GH 1.0 mm, cementable incl. basic screw 22120 22110 BL RC Abutment, 0, Ø 6.5 mm L 6.0 mm, GH 2.0 mm, cementable incl. basic screw 22120 22115 BL RC Abutment, 0, Ø 6.5 mm L 6.0 mm, GH 4.0 mm, cementable incl. basic screw 22120 22118 BL RC Burn-out plastic coping Ø 6.5 mm, for Bridge 22119 BL RC Burn-out plastic coping Ø 6.5 mm, for Crown 22120 BL RC basic screw, L 7.5 mm for cementablees Abutment BONE LEVEL PROSTHETICS RC 22117 BL RC Burn-out plastic coping Ø 5.0 mm, for Crown

50 DENTAL RATIO BONE LEVEL PROSTHETICS RC ALLIGATOR Impression Model 22096 22088 22089 22097 2010.601 63978 2010.611 64551 2010.701 Hybrid 64553 2010.702 2010.731 2010.710 2010.711 Impression 2010.722 2010.712 Model 2010.721 2010.713 2010.714 2010.715 2010.725 BONE LEVEL PROSTHETICS NC 0 22124 22125 22126 2010.731 22127 22128 2010.741 75836 2010.751 Hybrid 63978 64551 64553 2010.703 2010.723 2010.724 2010.101 15 22129 22130

DENTAL RATIO 51 Article-No. Product Article-No. Product 22124 BL RC ALLIGATOR Abutment GH 1.0 mm 22125 BL RC ALLIGATOR Abutment GH 2.0 mm 22126 BL RC ALLIGATOR Abutment GH 3.0 mm 22127 BL RC ALLIGATOR Abutment GH 4.0 mm 22128 BL RC ALLIGATOR Abutment GH 5.0 mm 22129 BL RC ALLIGATOR Abutment angled, 15, GH 3.0 mm 22130 BL RC ALLIGATOR Abutment angled, 15, GH 4.0 mm 22131 BL NC/RC ALLIGATOR Basic screw for 22041/22042/22129/22130 64551 OKTAGON Screwdriver one-piece, L 24 mm 75836 TL/BL ALLIGATOR attachment driver, L 15 mm NOVALOC S W I S S M A D E 2010.101 Equipment Box with 3 tools 2010.731, 2010.741, 2010.751 (excluding consumables) 2010.731 Demounting tool for mounting inserts + model analogue reposition aid, blue 2010.741 Mounting and demounting tool for retention inserts, brown 2010.601 Processing package Titanium 2 pcs. Titanium matrix housing incl. PEEK mounting insert black Retention inserts white, yellow, green Mounting collar silicone 2010.611 Processing package PEEK 2 pcs. PEEK matrix housing incl. PEEK mounting insert black Retention inserts white, yellow, green Mounting collar silicone 2010.710 Retention insert red 4 pcs. PEEK, pull-off weight extra-light 2010.711 Retention insert white 4 pcs. PEEK, pull-off weight light 2010.712 Retention insert yellow 4 pcs. PEEK, pull-off weight medium 2010.713 Retention insert green 4 pcs. PEEK, pull-off weight strong 2010.714 Retention insert blue 4 pcs. PEEK, pull-off weight extra-strong 2010.715 Retention insert black 4 pcs. PEEK, pull-off weight ultra-strong 2010.751 Matrix housing extractor grey 2010.703 Titanium matrix housing 4 pcs. with attachment option incl. PEEK mounting insert 2010.701 Titanium matrix housing 4 pcs. incl. PEEK mounting insert 2010.702 PEEK matrix housing 4 pcs. incl. PEEK mounting insert 2010.725 PEEK mounting insert 4 pcs. black 2010.721 Model analog 4 pcs. Aluminium 2010.722 Forming / fi xing matrix, red 4 pcs. PEEK 2010.723 Processing spacer, white 4 pcs. POM C 2010.724 Mounting collar 10 pcs. silicone BONE LEVEL PROSTHETICS NC

52 DENTAL RATIO OKTAGON INSTRUMENTS AND TOOLS PARALLEL PINS Ø 2.0/3.0 mm RP/TD/WP/BL 79575 DEPTH GAUGES RP/TD/WP/BL Ø 2.0 mm Ø 3.0 mm L 25 mm 64557 64556 DRILL TOOLS Pilot drill Ø 1.54 mm RP/TD/WP/BL 11594 Drill extension L 27 mm 11592 ADAPTER RP/TD/WP/BL 31056 64558 11607 31057 17372 31052 INSTRUMENTS SCREWDRIVER RP/TD/WP/BL 63978 64551 64553 EMERGENCY 24h TOOLS RP/TD/WP BL NC BL RC 64548 64547 64550 64549

DENTAL RATIO 53 TOOLS RP/TD/WP/BL Torque ratchet Holding key 89048 64563 Altus Gingiva Height Measuring Tool for precise determination of the gingiva height on implants and selection of the correct abutment height 2013.901 X-Ray reference spheres 87434 COMPONENTS RP/TD/WP/BL 82895* 82894* Surgical kit * Figures show surgical kits with content DRILL-STOP CONTROL RP/TD/WP/BL 38170 187RF018 TL/BL Pilot drill Ø 1.8 mm L 12.0 mm 38160 TDS15020 TL/BL Twist drill Ø 2.0 mm L 33.5 mm 38161 TDS15028 TL/BL Twist drill Ø 2.8 mm L 33.5 mm 38162 TDS15035 TL/BL Twist drill Ø 3.5 mm L 33.5 mm 38163 TDS15042 TL/BL Twist drill Ø 4.2 mm L 33.5 mm 38164 CL032 TL/BL Drill Sleeve 14.0 mm 38165 CL034 TL/BL Drill Sleeve 12.0 mm 38166 CL036 TL/BL Drill Sleeve 10.0 mm 38167 CL038 TL/BL Drill Sleeve 8.0 mm 38168 CL040 TL/BL Drill Sleeve 6.0 mm W 80 x H 37 x D 25 mm INSTRUMENTS

54 DENTAL RATIO OKTAGON SURGICAL KIT MINI Round bur Twist drill Twist drill Twist drill Tap (max. 800 min 1 ) (max. 600 min 1 ) (max. 500 min 1 ) (max. 400 min 1 ) (max. 15 min 1 ) Ø 2.2 mm Ø 2.8 mm Ø 3.5 mm Ø 4.2 mm Ø 3.3 mm 31061 38149 38135 38151 22138 BL Twist drill Tap Tap Tap Parallel-Pin (max. 800 min 1 ) (max. 15 min 1 ) (max. 15 min 1 ) (max. 15 min 1 ) Ø 2.2 mm Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm Ø 2.0/3.0 mm 38120 95267 95265 95266 79575 INSTRUMENTS Pilot drill Tap Countersink Countersink (max. 800 min 1 ) (max. 15 min 1 ) (max. 300 min 1 ) (max. 300 min 1 ) Ø 1.54 mm Ø 3.3 mm Ø 3.5 mm Ø 4.2 mm 11594 72268 93740 93738 Drill Extension FREE FREE FREE 11592

DENTAL RATIO 55 ILLUSTRATION BASIC PREPARATION TISSUE LEVEL Ø 3.3 mm TISSUE LEVEL Ø 4.1 mm TISSUE LEVEL Ø 4.8 mm BONE LEVEL INSTRUMENTS & TOOLS Countersink Tap Countersink Tap Countersink (max. 400 min 1 ) (max. 15 min 1 ) (max. 300 min 1 ) (max. 15 min 1 ) (max. 300 min 1 ) Ø 3.3 mm Ø 4.1 mm Ø 4.1 mm Ø 4.8 mm Ø 4.8 mm 22136 95264 22111 95269 22114 Parallel-Pin Depth Gauge Depth Gauge Adapter Screwdriver - - - - Ø 2.0/3.0 mm Ø 2.0 mm Ø 3.0 mm 79575 64557 64556 17372 64551 Holding Key FREE 64553 Torque ratchet 89048 INSTRUMENTS

56 DENTAL RATIO OKTAGON SURGICAL KIT PILOT DRILL TWIST DRILL Pilot drill Twist drill Twist drill Twist drill Twist drill Tap (max. 800 min 1 ) (max. 800 min 1 ) (max. 600 min 1 ) (max. 500 min 1 ) (max. 400 min 1 ) (max. 15 min 1 ) Ø 1.54 mm Ø 2.2 mm Ø 2.8 mm Ø 3.5 mm Ø 4.2 mm Ø 3.3 mm 11594 38120 38149 38135 38151 95267 Round bur Twist drill Twist drill Twist drill Twist drill Tap (max. 800 min 1 ) (max. 800 min 1 ) (max. 600 min 1 ) (max. 500 min 1 ) (max. 400 min 1 ) (max. 15 min 1 ) Ø 2.2 mm Ø 2.2 mm Ø 2.8 mm Ø 3.5 mm Ø 4.2 mm Ø 3.3 mm 31061 38121 38148 38136 38152 72268 INSTRUMENTS Parallel pins Tap Countersink Countersink Tap (max. 15 min 1 ) (max. 400 min 1 ) (max. 400 min 1 ) (max. 15 min 1 ) Ø 2.0/3.0 mm Ø 3.3 mm Ø 3.3 mm Ø 3.3 mm Ø 4.1 mm BL 79575 22138 22136 22137 95264 FREE Screwdriver Screwdriver Screwdriver Adapter 63978 64551 64553 31052 FREE FREE FREE Holding key 64563 Torque ratchet 89048

DENTAL RATIO 57 ILLUSTRATION BASIC PREPARATION TISSUE LEVEL Ø 3.3 mm TISSUE LEVEL Ø 4.1 mm TISSUE LEVEL Ø 4.8 mm BONE LEVEL INSTRUMENTS & TOOLS TAPS DEPTH GAUGE WP TD Tap Tap Depth gauges Depth gauges Countersink Countersink (max. 15 min 1 ) (max. 15 min 1 ) - - (max. 300 min 1 ) (max. 300 min 1 ) Ø 4.1 mm Ø 4.8 mm Ø 2.2/2.8 mm Ø 3.5 mm Ø 4.2 mm Ø 3.5 mm 95265 95266 64560 64561 93738 93740 Tap Tap Depth gauges FREE FREE FREE (max. 15 min 1 ) (max. 15 min 1 ) - Ø 4.1 mm Ø 4.8 mm Ø 4.2 mm 31088 61314 64562 Countersink Countersink Tap Countersink Countersink Drill extension (max. 300 min 1 ) (max. 300 min 1 ) (max. 15 min 1 ) (max. 300 min 1 ) (max. 300 min 1 ) Ø 4.1 mm Ø 4.1 mm Ø 4.8 mm Ø 4.8 mm Ø 4.8 mm 22111 22113 95269 22114 22112 11592 Adapter Adapter Adapter Adapter Adapter FREE 64558 17372 31056 31057 11607 INSTRUMENTS

58 DENTAL RATIO MEISINGER PRESENTS 5 th ANNUAL HIGH ALTITUDE COMPREHENSIVE IMPLANT SYMPOSIUM (Formally High Altitude Bone Management Winter Camp) SAVE THE DATE Speakers: Vail Mountain Marriott January 28 th February 1 st, 2015 Vail, Colorado, USA Pre-Registration Going on NOW! CALL TODAY +49 2131 2012-441 Dr. Michael Pikos Dr. Istvan Urban Dr. Sascha Jovanovic Dr. Daniel Cullum Dr. Brian Butler Dr. John Russo Dr. Dwayne Karateew Dr. Mitra Sadrameli Dr. Scott Ganz Dr. Robert Gellin Dr. Robert Miller Dr. Michael Block Hager & Meisinger GmbH Hansemannstr. 10 41468 Neuss Germany Fax: +49 2131 2012-222 info@meisinger.de www.meisinger.de

DENTAL RATIO 59

60 DENTAL RATIO TORQUE VALUES AND SPEEDS Diameter Torque Speed Tools Implants Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm max. 35 Ncm max. 35 Ncm max. 35 Ncm max. 15 min -1 max. 15 min -1 max. 15 min -1 Handpiece adapter Finger wheel Torque ratchet Pilot drills Ø 1.54 mm Ø 1.8 mm - max. 600 min -1 max. 600 min -1 Handpiece adapter Round burs Ø 2.2 mm - max. 800 min -1 Handpiece adapter Twist drills Ø 2.0 mm Ø 2.2 mm Ø 2.8 mm Ø 3.5 mm Ø 4.2 mm - max. 800 min -1 max. 800 min -1 max. 600 min -1 max. 500 min -1 max. 400 min -1 Handpiece adapter Countersinks Ø 2.8 mm Ø 3.3 mm Ø 3.5 mm Ø 4.2 mm - max. 300 min -1 max. 300 min -1 max. 300 min -1 max. 300 min -1 Handpiece adapter Taps Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm - max. 15 min -1 max. 15 min -1 max. 15 min -1 Handpiece adapter Finger wheel Torque ratchet Cover screws - Healing abutments - hand screwed - Screwdriver Torque ratchet Occlusal screw - max. 15 Ncm Abutments - max. 35 Ncm Screwdriver INFORMATION Ball Attachments - max. 35 Ncm ALLIGATOR/LOCATOR - max. 35 Ncm All values shown in this table are recommendations only. - Solid abutment driver Screwdriver

DENTAL RATIO 61 MATERIAL OKTAGON Pure titan grade 4 (3.7065) according ASTM F 67 (2013) Pure titan grade 5 (3.7165 Medical Grade) according ASTM F 136 (2013) Stainless steel (1.4197) according ASTM F 899b (2012) Stainless steel (1.4305) according DIN EN 10088-3 (2012) EPDM according FDA CFR Title 21 (2013) Polyoxymethylen (POM) according DIN EN ISO 13504 (2012) Polyetheretherketon 100 % (PEEK) Mouth-resistant plastic according DIN EN ISO 13504 (2012) Polysulfon (PSU) according DIN EN ISO 13504 (2012) Implants Cover screws Matrix Implant analogs Healing abutments Abutments (NO ALLIGATOR) Ball attachments Solid abutments Basic screws for Abutments ALLIGATORS incl. screw Occlusal screws Impression caps incl. screw Temporary copings Round bur, Twist drills, Profi l drills Taps Countersinks Emergency 24h Tools Handpiece adapter Screwdriver Adapter Parallel Pins Depth gauges Holding key Handpiece X-Ray reference spheres Torque ratchet O-Rings 70 shore red light 80 shore blue medium 90 shore black strong OKTAGON plastic copings, OKTAGON impression caps, interior trim of adapter ball attachments Temporary copings Multi function abutments Polyetheretherketon 100 % (PEEK) Mouth-resistant plastic according ISO 15309 (2013) Pure titan grade 4 (3.7065) according ASTM F 67 (2013) Polyetheretherketon 100 % (PEEK) Mouth-resistant plastic Novaloc Plastic parts Matrix Altus Plastic parts INFORMATION

62 DENTAL RATIO MANUFACTURER INFORMATION DENTAL RATIO products for dental implantology are of high quality and manufactured by the traditional German company Hager & Meisinger, a guarantee for high-grade medical products over the past 125 years. Hager & Meisinger assure the quality of their products by means of unlimited, uninterrupted monitoring of all production stages and the high quality of materials used as well as continuous monitoring of storage conditions. Certifi ed according to: ISO 9001 ISO 13485 Medizinprodukterichtlinie 93/42/EWG INFORMATION TISSUE LEVEL Implants and Abutments are approved for the U.S. market by 510(k).

DENTAL RATIO 63 DECLARATION OF CONFORMITY - MEISINGER COMPANY AND PROCESS EVALUATION Regular examination of product fi les by the notifi ed body Total recertifi cation of the QM system every 3 years by the notifi ed body Monitoring at least once per year by the notifi ed body More than 10 customer audits per year (sometimes several days) Annual internal audits in all relevant parts of the company Company department for regulatory affairs and product validation Regular domestic and international market observation and analysis INFORMATION

64 DENTAL RATIO QUALITY ASSURANCE THROUGHOUT THE MANUFACTURING PROCESS COURSE OF ACTION Unlimited, uninterrupted traceability of all production stages Invariably monitored production (no unmanned production) Continuous monitoring of storage conditions to ensure sterility VALIDATION All relevant processes (including cleaning) are validated Validated packaging (in cleanroom) and sterilisation Regular revalidation of all processes MEASUREMENT AND TESTING EQUIPMENT State-of-the-art, calibrated measuring and testing equipment used (partly computer-aided) Continuous monitoring of all test equipment within the certifi ed QM system TESTS IN-PROCESS Bioburden test for determining the microbial count Incoming goods test on the materials Surface analysis with a scanning electron microscope to test the surface topography (macro/micro cluster) Documented fi nal check including a 100% test of the most important functional features Documented X-ray spectral analysis of all manufacturing orders for production residues REGULAR Endotoxine test during cleaning validation Particle test during cleaning validation Cytotoxicity tests on packaged and sterilised products to confi rm biocompatibility Use of accredited partner companies for external laboratory tests FURTHER TECHNICAL DETAILS ABUTMENTS Passivated surface to reduce the risk of cold welding CONNECTOR All screw connectors standardised (ISO 10664) Torque is transferred fi rmly and adequate clamping is achieved between the screw and screwdriver INFORMATION IMPLANT SYSTEMS Matched tolerance concept between the individual components (e.g. the pitch of the implant corresponds to that of the tap) A sterile cover screw is included right in the sterile package Primary and secondary packaging ensure sterility Break-off point limits the maximum placement torque

DENTAL RATIO 65 MANUFACTURER CERTIFICATION Novaloc INFORMATION

66 DENTAL RATIO GUARANTEE GENERAL TERMS AND CONDITIONS INFORMATION The guarantee relates to the OKTAGON and HEXATEC implant systems of DRS International GmbH, hereinafter referred to as «DRS products and components». In addition to the statutory seller s warranties we provide at the discretion of the authorised persons from this guarantee a guarantee as follows: 1 SCOPE OF GUARANTEE In accordance with our guarantee promise DRS guarantees treating dentists, who after 01.01.2014 fi tted original DRS products and components in their patients under the following requirements and conditions, to replace these DRS products and components if the fi xation fails. This includes free delivery of the relevant DRS product and DRS components as well as compensation of the resulting additional treatment costs for replacement. The guarantee only covers the normal wear of DRS implants and abutments with a lifetime guarantee excluding instruments. It is a requirement of the guarantee that the patient did not have any contraindications specifi ed in the product description before, during or after implant placement. This obligation applies only for DRS products, which have been sold in Germany by DRS and inserted in Germany. The basis of the guarantee is always the individual guarantee certifi cate given by DRS with the delivery of a DRS product. The obligation is only for the benefi t of a treating doctor/dentist. Third parties, in particular patients or intermediate suppliers cannot derive any rights from this guarantee. The assignment of claims from the guarantee declaration is excluded. This guarantee programme is valid in the Federal Republic of Germany. 2 GUARANTEE CONDITIONS AND EXCLUSIONS DRS undertakes to replace only if the fi xation fails within lifetime guarantee, even though the following essential conditions have been fulfi lled by the treating dentist or doctor and/or patient: The patient must be carefully selected by the treating dentist and/or doctor, informed about the risks connected with the treatment and the obligations of the patient and asked to cooperate. The indications/contraindication must be carefully observed and documented. [More details are available in the respective product descriptions.] At the time of treatment the available instructions from DRS and recognised dental medical procedures must be observed and used accordingly before, during and after implant placement. The attending doctor is additionally responsible to regularly inform himself about the current status of the DRS products and components and their proper use. Continual good oral hygiene by the patient and checks at regular intervals must be ensured and documented. The product that is the subject of the claim must be returned in a sterilised state for the purpose of identifi cation. A completed guarantee form, the original guarantee certifi cate and the required additional documents for fulfi lling the conditions of the guarantee must be submitted together with the product. The guarantee does not apply: if DRS products have been modifi ed or if DRS products have been used in combination with products that did not originate from DRS; for special designs or specially fabricated or modifi ed products; if failure of an implant is triggered or induced by an accident, trauma or other damages caused by the patient or a third party; and in case the disadvantage bases on the fact the attending doctor does not have provable knowledge of implantation technology or does not have according qualifi cation in this special fi eld. 3 PROCEDURE FOR GUARANTEE CLAIMS If you think you meet the requirements for making a claim under guarantee, within the framework of the guarantee procedure you must submit a completed and signed guarantee form (including the required attachments therein) together with the original of the guarantee certifi cate to DRS within 1 year of becoming aware of the failure of the DRS products and/or components. All components must be returned sterilised. 4 TERMINATION DRS can change or end this warranty program in relation with any product or in relation with the entitlement of a specifi c treating Dentist or Doctor at any time. Already existing guaranties remain unchanged in their coverage as on purchasing date. 5 OTHER By participating in this guarantee programme and the purchase of products from DRS in connection with it, the treating dentist and/or doctor accepts the conditions defi ned herein. 6 VALIDATION These warranty terms are valid beginning from 01.06.2014 for all DRS products and/or components used after 01.01.2014. In case at the time of purchasing DRS products and/or components the then valid warranty terms were covering a larger scope of warranty terms as the actual valid terms, then these terms will apply. Issue August 2014 1. GENERAL/SCOPE 1.1. Our terms and conditions of delivery and payment apply for all business relationships with our customers and customers accept them as binding for them with placement of an order. 1.2. Conditions that deviate from the following and/or legal provisions in particular in the conditions of purchase of the customer are only binding for us, if they have been confi rmed in writing. This also applies for conditions, which are not stipulated in our terms and conditions for delivery and payment. The unconditional delivery of goods or receipt of payment does not mean any acceptance of deviating provisions by us. 1.3. All agreements, which are reached between us and the customer for the purpose of fulfi lling a contract, are laid down in writing in the contract and in these applicable terms and conditions. Changes, additions or cancellation of a contract or these terms and conditions are only effective with our written confi rmation. 2. OFFERS/OFFER DOCUMENTATION 2.1. Our offers are non-binding, if no other agreement has been made. 2.2. Illustrations, drawings, calculations and other product, application or project related documents remain our property and are subject to copyright, even if we place them at the customer s disposal: they may not be reproduced or made accessible to third parties without our express prior written consent. 3. PRICES/TERMS OF PAYMENT 3.1. Unless otherwise agreed, our prices apply ex-works. The costs for package, insurance, freight and VAT are not included and will be invoiced separately. The VAT will be shown separately on the invoice at the statutory rate on the invoice date. If we do not have any written request in advance by the recipient for uninsured delivery, all our shipments will be internationally insured at the expense of the recipient. 3.2. With customer-specifi c production we are entitled to an over or under delivery of 10% in relation to the order quantity and to invoice accordingly. 3.3. Unless otherwise agreed, the purchase price is net (without deductions) payable within 30 days from the date of the invoice. Deduction of a discount requires special written agreement. 3.4. Should the customer be in default of payment, we are entitled to charge default interest at 8% over the current valid base interest rate. We are entitled to charge reminder fees of 30.00 to 60.00 EUR for each reminder depending on the reminder stage. 3.5. If, after conclusion of the contract, a signifi cant deterioration of the customer s fi nancial circumstances is recognised which will endanger our claim for payment, provided there is an obligation for advance performance we are entitled to withhold our performance up and until payment is effected or security is provided to us for our payment claim. If, after a reasonable deadline set by us, the customer is neither willing to perform concurrently nor provide security we will be entitled to rescind the contract. 3.6. The customer shall only be entitled to offsetting rights, if they have been established by us as existing and due or enforced by law. The customer is only entitled to right of retention in so far as the counterclaim is based on the same contractual relationship. 4. DELIVERY, DELIVERY TIMES, PART DELIVERIES 4.1. Fulfi llment with our delivery obligations shall depend on punctual due fulfi lment of the obligations of the customer, in particular compliance with the agreed terms and conditions of payment. The right to raise an objection to a non-fulfi lled contract is reserved. 4.2. The delivery times agreed in writing begin on the day of our confi rmation but not before clarifi cation of all technical and commercial details as well as presentation of any authorisations required. Any modifi cations requested by the customer regarding the delivery of the contractual object within the period of delivery shall interrupt and extend the period of delivery accordingly. 4.3. Occurrence of unforeseen events, force majeure and non-delivery by our supplier for which we are not responsible entitle us to suspend the delivery for the duration of the disruption and a reasonable restarting period. 4.4. Partial deliveries are permitted to a reasonable extent.

DENTAL RATIO 67 4.5. If we are in default in delivery, the customer is entitled to set us an extended deadline in writing. If the delivery goods have not been delivered by us within the period of the extended deadline, the customer is entitled to withdraw for those parts which were not delivered before expiry of the extension. We accept liability for provable damages that occur to the customer due to a delay for which we are at fault. Our liability is limited in such a way that the customer can claim 0.5 percent for each complete week of the delay but not more than 0.5 percent in total of the price for the part of the delivery that could not be put into proper operation. This does not imply a change in the burden of proof to the disadvantage of the customer. The statutory right of withdrawal of the customer remains unaffected. 4.6. If delivery is delayed for reasons for which the customer is responsible, the customer can be charged a storage fee for each month started at 0.5 percent in total of the price of the delivery items but not more than 5 percent. After a reasonable period of grace we are entitled to dispose of the delivery item otherwise and to supply the customer after a reasonably extended period. The contractual parties reserve the right to provide evidence of higher, lower or no storage costs. The statutory right to rescind the contract and claim compensation for damages remain unaffected. 4.7. If the customer is in default of acceptance or is in violation of other obligations to cooperate, we are entitled to claim compensation for damages incurred by us to this extent including any additional expenses. We reserve the right to make further claims. 5. DISPATCH, TRANSFER OF RISK Unless otherwise agreed, delivery will be made using the most favourable mode of shipment for us. All deliveries are made ex warehouse, at the expense and risk of the recipient, creditworthiness assumed. At the request of the customer and against payment of the additional costs we also arrange special modes of dispatch (e.g. express transport) or partial deliveries. 6. NOTIFICATION OF DEFECTS, GUARANTEE, LIABILITY 6.1. The customer must check the delivery with due care immediately after receipt and notify us in writing of any detectable defects immediately or at the latest within seven days after delivery (obvious defects) or discovery. Otherwise the delivery is deemed to have been accepted. 6.2. Guarantee claims shall not be valid with natural wear or damages, which were caused after transfer of risk as a result of incorrect or negligent handling, excessive loading, unsuitable equipment or due to special external infl uences, which have not been provided for in the contract. If the customer or a third party undertake improper modifi cations or repair work, guarantee claims are also not valid for these or consequences arising therefrom. 6.3. If there is a defect for which we are responsible, we have the choice of remedying the defect or making a replacement delivery. 6.4. If we refuse to remedy the defect or make a replacement delivery, if it is unacceptable for the customer or it fails, the customer has the choice of rescinding the contract or reducing the purchase price by a reasonable amount. This is provided, however, that there is no doubt that the notifi - cation of defect is justifi ed. If the notifi cation of the defect is unfounded, we are entitled to demand reimbursement of any expenses incurred by us from the customer. 6.5. Unless otherwise stated hereinafter, other or additional claims under guarantee, in particular claims of compensation for damages instead of performance are excluded. We therefore do not accept liability for damages, which were not caused to the delivery item itself; in particular we are not liable for a loss of profi t or other fi nancial losses of the customer. 6.6. The aforementioned disclaimer does not apply, if claims are made for damages based on grossly negligent or intentional breach of duty or claims are made for damages arising from injury to life, body or health or the customer makes a claim because of absence of a warranted product feature. With the latter claims for compensation can only be made in so far as the warranted feature covers the risk of consequential damage and the damage that occurred is based on its absence. 6.7. The guarantee period is for one year from the transfer of risk (Subparagraph 5). 6.8. Claims for personal damages or damage to privately used items according to the German product liability law remain unaffected by the aforementioned provisions. 7. RETURNS 7.1. We generally only take back originally packaged and unused goods within six weeks after receipt of the goods and after our prior agreement. We charge 25% of the net value of the goods when accepting returned goods. If it has exceptionally been agreed to take goods back that are not in the original packaging, handling fees will be charged accordingly but not less than 20% of the net value of the goods. 7.2. Goods can only be taken back if the Lot number is given. 7.3. Special orders and designs as well as sterile goods are generally excluded from exchange. 8. RETENTION OF TITLE 8.1. Goods supplied remain our property (retention of title goods) until all our claims against the customer from the business relationship have been completely fulfi lled. 8.2 If the customer is in breach of obligations, in particular in default of payment, we are entitled to rescind the contract and recover the goods; the customer is obliged to return the goods. Withdrawal or exercising retention of the title does not require rescission by the supplier; in such actions or a seizure of the reserved goods by us shall not be deeded as rescission from the contract, unless we have expressly stated this to be the case. 8.3. The customer is entitled to resell the goods in the ordinary course of business; however, the customer now assigns to us all claims to the amount of the fi nal invoice value (including VAT), accrued from the resale against the purchasers or third parties, regardless of whether the goods supplied were resold before or after processing. The customer remains authorised to collect this claim even after assignment. Our authority to collect the claim ourselves remains unaffected by this. However, we undertake not to collect the claim as long as the customer fulfi ls the payment obligations from the proceeds collected, is not in default of payment and in particular when no application for the opening of insolvency proceedings has been made or payments have been suspended. If this is the case, however, we can demand that the customer informs us of the assigned receivables and the debtors, gives us all the information and relevant documents necessary to assert our rights and informs the debtors (third parties) of the assignment. 8.4. For the duration of the retention of title the customer may not pledge the retained goods or use them as security. The customer shall inform us without delay in the event of pledges, seizures or other dispositions or interference by third parties so that we can assert our rights. If the third party is not in a position to refund us the judicial or extrajudicial expenses of an action under Article 771 of the German Code of Civil Procedure (ZPO), the customer shall be liable for the loss we incur. 8.5. The customer is obligated to handle the object of sale with care; in particular the customer is obligated at their own expense to insure the object of sale adequately to cover the replacement value against damage caused by fi re, water or theft. If maintenance and inspection work are required, the customer must perform these in a timely fashion at their own expense. 8.6. The processing or modifi cation of the object of sale by the customer shall always be undertaken for us. If the object of sale is processed or inseparably mixed with other objects not belonging to us, then we shall acquire co-ownership of the new item in proportion to the ratio of the value of our item (fi nal invoice value including VAT) to the other objects at the time of processing or mixing. The same applies to items that have been processed or mixed as for the goods supplied subject to retention of title. If mixing is performed in such a way that the supplier s goods are regards as the main item, it is agreed that the customer transfers co-ownership proportionally. The customer shall store the sole property created for us. 9. EFFECTIVENESS OF THE CONTRACT If one or more of the provisions of these General Terms and Conditions of Delivery and Payment is or becomes inoperative, this does not affect the effi - cacy of the other provisions. Rather the ineffectiveness of the provision will be replaced by a provision that is as close as possible to the identifi able interests. 10. PLACE OF PERFORMANCE, PLACE OF JURISDICTION, APPLICABLE LAW 10.1. Our business location shall be the place of performance for both parties for all rights and obligations resulting from our deliveries. We shall have the optional right to take legal action at the location of the customer. 10.2. German law shall apply exclusively. Use of the United Nations Convention on Contracts for the International Sale of Goods (CISG) is excluded. The data specifi ed by the customer will be stored and processed by electronic data processing provided it is permitted in accordance with the data protection act. Issue August 2014 INFORMATION

ASK SMART Thank you for your interest in DENTAL RATIO. We look forward to your questions and suggestions and we would be happy to assist you in any way. CUSTOMER ID Art. No. 89850 ISSUE September 2014 DRS International GmbH Raiffeisenstr. 15 a 40764 Langenfeld Germany Phone +49 2173 39800-0 Fax +49 2173 39800-20 E-Mail info@dental-ratio.de Web http://www.dental-ratio.de Social http://facebook.com/dentalratio Produced by Made in Germany C0044