ITI Small Diameter (SD) external hex 3.25 / 3.3 external hex. ITI Standard 4.8 internal non-octagon Morse taper 4.

Transcription

1 ITI Standard Implant Dental Implant System The ITI Dental Implant System was developed in Switzerland by the Institute Straumann and Dr. ndre Schroeder, President of the University ern. ITI implants are endosseous onestage and were originally designed for overdentures using the Dolder ar system. ITI is now utilized for all restorative options. The one-stage (non-submerged) approach simplifies the procedures and helps minimize trauma to the patient and reduces chairtime as only one surgical procedure is required. The ITI implant system currently encompasses three different types of implants: ITI Small Diameter (SD) external hex 3.25 / 3.3 external hex ITI Compatible ITI Standard 4.8 internal non-octagon Morse taper 4.8 Platform / Neck ITI Syn-Octa 4.8 internal octagon Morse taper 4.8 Platform / Neck ITI Syn-Octa Implant Components made by ttachments International are available for the ITI Standard 4.8 internal non-octagon Morse taper and ITI Syn-Octa 4.8 internal octagon Morse taper. No components are currently available for the ITI SD external hex. Note: The ITI Standard components will mate with the ITI Syn-Octa implant without engaging the octagon. Implants ITI Small Diameter 3.25 / 3.3 external hex Restoratively Compatible To none ITI Standard 4.8 internal non-octagon Morse taper 3i TG Osseotite (4.8 Platform / Neck) Innova Endopore Internal Connection LifeCore Stage-1 ITI Syn-Octa 4.8 internal octagon Morse taper Zimmer SwissPlus (4.8 Platform / Neck) lue Sky io ø4.8mm Platform/Neck 2.0mm Thread Diameter ø4.8mm Platform/Neck 2.0mm Thread Diameter 3.0mm Octagon mm Thread 2.0mm Thread ITI Standard Internal ITI Syn-Octa Internal Non-Octagon Morse Taper Octagon Morse Taper 4.8 Platform / Neck 4.8 Platform / Neck 269

2 Terminology of Components ITI Page Header Sample Guide Direct To The Implant Healing Caps Direct Ti Posts Components listed on page Compatible Implant Name Restoration Connection Direct To The Implant Indirect Components Restorative Components: For ease in selecting components, the ITI Section is divided by Restoration Connection: Direct To The Implant or Indirect To n Intermediate Component (Tissue Extensions/butments). Overdenture ttachments, ar Systems, Individual Parts and Tools follow the Indirect Section. The Direct Restorative Components are the elements used to fabricate a restoration that will be connected directly to the implant(s). The Indirect / Intermediate Restorative Components fit to an intermediate tissue extension (Octabutment) which in turn is connected to the implant(s). Implant ody: The implant body is placed into the bone for approximately 4-6 months to allow for osseointegration. The implants should not be loaded prior to osseointegration. ITI Syn-Octa Octabutment: The Octabutment was designed for screw retained restorations and is compatible with the original Octabutment from Straumann. The shoulder of the Octabutment becomes flush with the top of the implant. Octabutment Compatibility: Implants ITI Small Diameter 3.25 / 3.3 external hex Restoratively Compatible To none ITI Standard 4.8 internal non-hex Morse taper 3i TG Osseotite (4.8 Platform / Neck) Innova Endopore Internal Connection LifeCore Stage-1 ITI Syn-Octa 4.8 internal octagon Morse taper Zimmer SwissPlus (4.8 Platform / Neck) lue Sky io 270

3 Straumann IMPLNT HELING CP to fit Internal Morse Taper compatible implants The implant healing caps fit directly to internal Morse taper connection implants and are used to cover the implant during the initial integration period. They are available in four lengths. 0mm SCS Direct Healing Caps UCL butment Direct Ti Posts closure screw is available for the 2 stage technique. The healing caps and closure screw require a IO-TORQ SCS (star) tip / driver. ITI Compatible Description (ll components manufactured by ttachments Int.) To Fit Order # Implant Healing Cap 2mm () H=2mm ø=4.9mm ITI compatible implants Implant Healing Cap 3mm H=3mm ø=4.9mm Implant Healing Cap 4mm H=4mm ø=4.9mm Implant Healing Cap 5mm H=5mm ø=4.9mm Implant Closure Screw, Star (SCS) 0mm () TOOLS RECOMMENDED: IO-TORQ Tip SCS (star), short IO-TORQ Tip SCS (star), long Optional: IO-TORQ dapter for ITI Torque Wrench UCL GOLD UTMENTS The UCL abutment system is the most widely used restorative concept. Engaging GOLD cylinders with a.050"/1.25mm hex screw are made to engage regular neck internal octagon Morse Taper implants. The non-engaging GOLD cylinder includes an.050"/1.25mm hex screw. Gold Description (ll components manufactured by ttachments Int.) To Fit Order # SwissTL RD UCL GOLD Engaging butment (red),.050"/1.25mm Hex Screw () Standard Internal Oct Morse Taper compatible SwissTL RD UCL GOLD Non-Engaging butment (white),.050"/1.25mm Hex Screw () Standard Internal Oct Morse Taper compatible TOOLS RECOMMENDED: IO-TORQ Tip Square.050", short.050"/1.25mm square screw IO-TORQ Tip Hex.050", short.050"/1.25mm hex screw Optional: IO-TORQ dapter for ITI Torque Wrench DIRECT TITNIUM POSTS to fit Internal Morse Taper compatible implants The direct titanium abutment posts screw into the implant body and are indicated for single units or bridge restorations. The tapered posts can be altered like a preparation. Fabricate a soft tissue model whenever preparations are made in the laboratory. If the final restoration is to be retrievable, consider using set screws Description (ll components manufactured by ttachments Int.) To Fit Order # Direct Titanium Posts 4.0mm Height ITI compatible implants Direct Titanium Posts 5.5mm Height Direct Titanium Posts 7.0mm Height TOOLS RECOMMENDED: IO-TORQ Post Insertion Tip Direct Titanium Post Optional: IO-TORQ dapter for ITI Torque Wrench Straumann is a federally registered trademark of Straumann Holding G Corp, Switzerland ITI is a federally registered trademark of Straumann Holding G Corp, Switzerland Copyright 2010 ttachments International, Inc., urlingame, C 271

4 Indirect Octabutment OCTUTMENT COMPONENTS OCTUTMENT The Octabutment was designed for screw retained single tooth or bridge restorations. The Octabutment has an external octagon and a tapered mating surface that securely locks with the implant when torqued into place. The Octabutment is available only in one length. Restorations can be made on the abutment using abutment cylinders. The Impression Coping takes an impression of the abutment and transfers the implant position and thread timing. The nalog is a replica of the abutment and is used for fabrication of a master model. The Cylinders are available either with an internal octagon for single tooth restorations or non-octagonal for crown & bridge or bar restorations. To attach the abutment use the IO-TORQ or LT/R tips. Refer to the Direct Section for restorations that fit to the implant directly. C D D E E Impression Coping nalog Temp Octabutment Temp Non-octagon Octagon Cylinder Non-Octagon Cylinder Description (ll components manufactured by ttachments Int.) Intended Use Order # C D E Octabutment 1 piece Tissue Extension / butment Octabutment, Titanium Components To Fit Octabutment / Tissue Extension Impression Coping 2 piece Open Tray Impression Taking / Transfer Timing Octabutment Impression Coping & Star Guide Pin Transfer thread timing nalog Model Fabrication Octabutment nalog, Stainless Temporary butments Crown & ridge / ar Restorations Temporary Octabutment & Star screw Temporary Non-octagon abutment & Star screw Cylinders and Screws Crown & ridge / ar Restorations Octagon cylinder (blue) & Star screw Non-Octagon cylinder (white) & Star screw Protector Cap Octabutment Protector Cap & Star screw PRTS Octagon cylinder only, blue Non-Octagon cylinder only, white Star screw only, for Octabutment (compatible with SCS driver) TOOLS IO-TORQ Tip Octabutment Insertion of Octabutment IO-TORQ Post Insertion Tip Insertion of Direct Titanium Post IO-TORQ Tip SCS (star), short Insertion of Fixation Screws (starlike) IO-TORQ Tip SCS (star), long NOTE: Prior to Sept. 2001, the square screws for the Octabutment were.045", then.050". ll screws are currently Star screws, compatible with SCS driver. 272

5 SCREWS & GUIDE PIN To Fit Octabutment The screws and guide pins for the Octabutment are used to fasten the restoration to the Octabutment and are made of Indirect Individual Screws & Guide Pins titanium alloy. The star screws and star guide pins require a IO-TORQ SCS (star) tip / driver. ITI Compatible Description (ll components manufactured by ttachments Int.) Intended Use Order # Screws* Star screw only (compatible with SCS driver) for Octabutment () Guide Pins Star Guide Pin for Octabutment 10mm () Star Guide Pin for Octabutment 12mm Star Guide Pin for Octabutment 14mm Star Guide Pin for Octabutment 16mm Star Guide Pin for Octabutment 20mm Protector Cap Octabutment Protector Cap & Star screw Tools IO-TORQ Tip Octabutment Insertion of Octabutment IO-TORQ Post Insertion Tip Insertion of Direct Titanium Post IO-TORQ Tip SCS (star), short Insertion of Fixation Screws (starlike) IO-TORQ Tip SCS (star), long IO-TORQ dapter for ITI Torque Wrench IO-TORQ io-ratchet *NOTE: Prior to Sept. 2001, the square screws for the Octabutment were.045", then.050". ll screws are currently Star screws, compatible with SCS driver. 273

6 Overdenture ttachments D ORS llegro Implant Female Kit lternative for D C DS & ORS OVERDENTURE STUD TYPE TTCHMENTS The Dalla ona and ORS, O-Ring system, are popular overdenture attachments that directly screw into the implant. 1 gold plated retainer ring, 3 white final & 3 red processing for the Dalla ona system. The ORS Female Kit includes oth connectors are made of titanium. The Dalla ona male O-Rings and 1 brass analog. (2.2mm ø) and the ORS male (2.2mm ø) are sold separately. The retention of the Dalla ona female is adjustable with The D Female Kit includes 1 adjustable female, 1 spacer the activating or deactivating tool. and 1 brass analog. The llegro Female Kit is an optional kit Description (ll components manufactured by ttachments Int.) Tissue Height Order # Dalla ona for ITI Implants () Dalla ona, male only 0mm Dalla ona, Implant Ti Female Kit, includes Female, Spacer & nalog llegro, Implant Female Kit (alternative for Dalla ona female) () includes Metal Housing, 4 Females, Implant Spacer & rass nalog ORS, O-Ring System for ITI Implants (C) ORS, male only 0mm ORS, Implant Female Kit, includes Retainer Ring, nalog & 3 red processing & 3 white final O-Rings Note: The Dalla ona and ORS for ITI / Morse Taper compatible implants are considered zero tissue height as the shoulder of the male cuff is flush with the top of the implant. No other heights are available. TOOLS (for a complete list of Dalla ona, llegro & ORS Tools and Parts see next page) Dalla ona/ors IO-TORQ Tip IO-TORQ dapter for ITI Torque Wrench LT / R Handle LT / R ORS / Dalla ona Tip Dalla ona ctivating Tool, lue Dalla ona Deactivating Tool, Yellow

7 Dalla ona & ORS OVERDENTURE STUD TYPE TTCHMENTS Two types of overdenture attachments are most commonly used to directly screw into the ITI implant the Dalla ona, and the ORS (O-Ring system). Connectors are made of titanium. Dalla ona and ORS males are sold separately by tissue height. The D Female Kit includes 1 adjustable female, Parts & Tools for Overdenture ttachments 1 spacer and 1 brass analog.the llegro Female Kit is an optional kit for the Dalla ona system. The ORS Female Kit includes 1 gold plated retainer ring, 3 white final & 3 red processing O-Rings and 1 brass analog. PRTS Description (ll components manufactured by ttachments Int.) Dimensions Order # DLL ON FOR IMPLNTS Dalla ona, Implant Female Kit: includes Female, Spacer & rass nalog Dalla ona, Resilient Female, Gold FH=3.1mm Dalla ona, Resilient Female, Titanium FH=3.4mm Dalla ona, Resilient Female, Plastic (4) FH=3.5mm Dalla ona Hex nalog, rass (2) Dalla ona Hex Spacer, rass (2) PVC Ring (6), replacement ring for Dalla ona female llegro, Implant Female Kit (alternative for Dalla ona female) includes Metal Housing, 4 Females, Spacer & rass nalog ITI Compatible ORS FOR IMPLNTS ORS, Retainer Rings (6) H=2.0mm ø=5.1mm ORS, Combo O-Rings (24): 6 blue, 6 red (processing), 6 wt, 6 blk Outside ø=4.5mm Inside ø=1.4mm ORS, Implant Female Kit: includes Retainer Ring, rass nalog and 3 red processing & 3 white final O-Rings O-Ring Hex nalog, rass (2) TOOLS IO-TORQ Wrenches, Socket & Driver IO-TORQ Wrench 10 N/cm IO-TORQ Wrench 20 N/cm IO-TORQ Wrench 30 N/cm IO-TORQ Wrench 35 N/cm IO-TORQ Hand Held Socket, swivel head (16.3mm Height) IO-TORQ Hand Held Socket, short (8.1mm Height) IO-TORQ Extension IO-TORQ ORS / Dalla ona Tip/Driver IO-TORQ dapter for ITI Torque Wrench LT/R DRIVER LT/R R Hand Driver LT/R R Handle / Socket LT/ R ORS / Dalla ona Tip DLL ON Dalla ona ctivating Tool, lue Dalla ona Deactivating Tool, Yellow LLEGRO (for replacement parts see llegro OD section page 99) llegro OD/DE Micro/Regular Insertion Tool Dalla ona ctivating Tool Dalla ona Deactivating Tool 275

8 Straumann Insertion Drivers INSERTION DRIVERS ND IO-TORQ WRENCHES & DRIVERS The IO-TORQ (-T) System was designed to facilitate the insertion of implant components. The IO-TORQ insertion tips/drivers may be utilized with the IO-TORQ hand held socket or the IO-TORQ wrenches. n adapter for Straumann / ITI Torque Wrench is available. IO-TORQ C D E F Socket Short Socket Extension SCS Octa Post Description (ll components manufactured by ttachments Int.) Order # IO-TORQ Hand Held Socket / Handle, Swivel Head (16.3mm Height) () IO-TORQ Hand Held Socket / Handle, Short (8.1mm) () IO-TORQ Extension (C) IO-TORQ dapter for Straumann / ITI Torque Wrench IO-TORQ Dalla ona / ORS Hex 2.5mm Tip IO-TORQ Tip SCS (star), Short IO-TORQ Tip SCS (star), Long (D) IO-TORQ Octabutment Tip (E) IO-TORQ Direct Titanium Post Insertion Tip (F) NOTE: Prior to Sept. 2001, the square screws for the Octabutment were.045", then.050". ll screws are currently Star screws, compatible with SCS driver. IO-TORQ Wrenches IO-TORQ Wrench 10 N/cm IO-TORQ Wrench 20 N/cm IO-TORQ Wrench 30 N/cm IO-TORQ Wrench 35 N/cm IO-TORQ dapter for Straumann / ITI Torque Wrench IO-TORQ io-ratchet IO-TORQ dapter for Straumann / ITI Torque Wrench Straumann is a federally registered trademark of Straumann Holding G Corp, Switzerland ITI is a federally registered trademark of Straumann Holding G Corp, Switzerland Copyright 2010 ttachments International, Inc., urlingame, C 276