Hyspin AWH Series High Quality Mineral Oils with a Viscosity Index Improver CASTROL HYSPIN AWH is a range of high quality mineral oils with a viscosity index improver, designed for operations over a wide temperature range with minimum variation in viscosity. They contain a balanced quantity of anti-wear, anti-oxidant, anti-foam and anticorrosion additives. CASTROL HYSPIN AWH fluids meet the needs of modern hydraulic equipment operating under severe service conditions, i.e. wide temperature range and high pressure. Having a fortified high viscosity index means the CASTROL HYSPIN AWH Series are ideal for use in hydraulic systems sensitive to variations in fluid viscosity due to extremes in operating temperature as well as offering a long service life under normal operating temperatures. s include plant and machine hydraulic systems, machine tools (CNC machines), certain gearboxes, bearing lubrication systems and many more applications requiring an oil with excellent anti-wear, anti-oxidant and viscous properties. CASTROL HYSPIN AWH is suitable for gear, vane and piston type hydraulic pumps, except those containing silver or cadmium. The recommended maximum bulk fluid temperature is approximately 95 0 C. However, continuous operation at this temperature may reduce the service life of the oil. Caution should also be exercised with the lighter grades. Contact your nearest Castrol Branch for further advice. High viscosity Index. Minimum change in viscosity over wide temperature range. Optimum performance under varying conditions. Proven additive system. Ensures maximum protection from wear, corrosion, foaming and oxidation. Reduced downtime, higher productivity. Lowered Pour point. Improved oil flow at low temperatures. Suitable for cold start-ups. High Aniline Point. Ensures minimum effect on synthetic rubbers. Extended life of seals. Full range of viscosities. Ideal viscosity grade can be selected. Optimise machine performance, minimise energy costs.
Hyspin AWS Series High Quality Mineral Oil Based Hydraulic Fluids Castrol Hyspin AWS is a range of high quality mineral oil based hydraulic fluids. Their natural properties are enhanced by the incorporation of anti-wear, antioxidation, anti-foam and anti-corrosion additives. Castrol Hyspin AWS fluids meet the needs of hydraulic equipment operating under medium to severe service conditions i.e. where machine performance is not effected by rising temperature. Typical applications include plant and machine hydraulic systems, machine tools (CNC machines), certain gearboxes, bearing lubrication systems and many more applications requiring an oil with good anti-wear and antioxidant properties Castrol Hyspin AWS is suitable for gear, vane and piston type hydraulic pump containing silver or cadmium. The recommended maximum bulk fluid temperature is approximately 80 deg.c. However continuous operation at this temperature may reduce the service life of the oil. Caution should also be exercised with the lighter grades. Contact your nearest Castrol Branch for futher advice. Anti-wear additives. Reduces wear on moving components. Improved reliability and extended pump life. Comprehensive additive package. Ensures maximum protection from wear. corrosion, foaming and oxidation. Reduced downtime, higher productivity. High Aniline Point. Ensures minimum effect on synthetic rubbers. Extended life on seals. Multi-purpose Fluid. Can be used for a variety of applications. Optimise machine performance, minimise energy costs.
Hysol X Series Environmentally friendly mineral oil soluble metal cutting lubricant Castrol Hysol X is a biostable, extreme pressure soluble oil. Castrol Hysol X contains lubricity agents, chlorine free EP additives and special additives to protect against corrosion. The biostable system incorporated into Castrol Hysol X provides a high resistance to bacteria/fungi attack. Castrol Hysol X can be used on all metals and machine operations.castrol Hysol X is especially applicable to machine aluminium and aluminium alloys giving extremely high finish and machining performance. Castrol Hysol X can be employed in large centralised systems or small individual coolant sumps. Castrol Hysol X is suitable for a wide range of demanding machining operations, from milling, drilling, tapping,and broaching to creep feed grinding where it has outstanding performance at low concentrations without foaming or misting. Castrol Hysol X can be used to machine awide variety of metals including, steels, cast irons, stainless steels, and in particular aluminium, including high silicon aluminium alloys. Suitable for machining virtually all metals and most machining operations. High versatility enables inventory rationalisation. (Not suitable for extended operation on copper and its alloys). Excellent machining performance. Good Extreme pressure properties. Low foaming characteristics. Excellent performance in soft water applications. Better surface finish and longer tool life. Suitable for severe applications such as broaching, creep feed grinding, tapping, and reaming of difficult alloys such as stainless steels. Good corrosion and non staining properties. Better work-piece quality Compatible with seal materials commonly used in machine tools. Can be employed in all machine centers. Operator and environmentally friendly. Free of chlorine's, nitrites,and phenols.
Hysol MB 50 High performance soluble metalworking fluid Castrol Hysol MB 50 is a high performance soluble metal working fluid, which is chlorine and formaldehyde releasing agent free. It contains a unique additive package that works in synergy to enhance machining performance and surface finish, provide excellent product stability, improve bio-resistance properties and lower the overall operations costs.hysol MB 50 is suitable for large central systems and single sump machines. Hysol MB 50 is especially designed for machining of ferrous and aluminium alloys. Formaldehyde releasing free to comply with health and safety regulations Chlorine and nitrite free to fulfill your local legislation, waste treatment and environmental requirements Resists fungal and bacterial attack to extend fluid life and reduce maintenance and machine downtime Low foam in recommended water conditions Good anti-corrosion properties to protect machine tools and parts Advanced lubricity compounds ensure improved tool life and part quality Excellent wetting properties reduce coolant drag out and deliver clean machine tools and components Unique multi-functional product for multi-metal operations results in product consolidation
Hysol GS CF High performance soluble metalworking fluid Castrol Hysol GS CF is a high performance chlorine free semi-synthetic metalworking fluid. It contains a unique additivepackage that works in synergy to enhance machining performance and surface finish, provide excellent product stability,improve bio-resistance properties and lower the overall operations costs. Hysol GS CF is suitable for large central systems and single sump machines. Hysol GS CF is especially designed for machining of cast iron and low-medium alloyed steel. Chlorine and nitrite free to fulfill your local legislation, waste treatment and environmental requirements Resists fungal and bacterial attack to extend fluid life and reduce maintenance and machine downtime Low foam in recommended water conditions Excellent anti-corrosion properties to protect machine tools and parts Advanced lubricity compounds ensure improved tool life and part quality Excellent wetting properties reduce coolant drag out and deliver clean machine tools and components
Magnaglide D Slideway Oils Castrol Magnaglide D is specially formulated for the lubrication of slideways on machine tools. These oils are fortified with selected oiliness, extreme pressure additives and a special material to impart tackiness and adhesiveness. Magnaglide D lubricants are noted for their usual ability to overcome the stick-slip motion ordinarily associated with slow moving tool parts. They reduce machine tool carriage chatter and possess the necessary adhesive characteristics to prevent squeezing out of the lubricant. Magnaglide D can be used on all horizontal and vertical slideways where a high quality demulsifying lubricant is required for slideway protection and to maximize coolant life; the outstanding frictional characteristics of the products prevents stickslip, improving surface finish and tolerances of machined components and reducing rejection rates. Maganaglide D meets the exacting demands in the following applications; planers, grinders, horizontalboring machines, shapers, jig borers, and milling machines. Magnaglide D 32 can be used as a combined hydraulic and slideway oil. The Magnaglide D range meets the requirements of: Cincinnati Lamb (Milacron) P-47, P-50 and P-53 (depending on viscosity grade) DIN 51502 CGLP DIN 51524 Part II (July 2004) including ISO 13357-1/-2 filtration test Suitable for Müller Weingarten equipment as hydraulic oil Outstanding demulsifying properties helps prevent soluble oil emulsions on plastic slideway surfaces. Avoids downtime and expensive slideway repair or replacement. Exceptional resistance to stick slip helps to ensure highly accurate and repeatable machining. Highquality output is maintained. Protects metals against staining and corrosion. Oil-wetted surfaces remain in good condition. Avoids downtime and expensive slideway repair orreplacement. Highly filterable filters in oil supply remain unblocked.
Alpha SP Gear Oils The Castrol Alpha SP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with sulphur/phosphorus extreme pressure additive technology providing outstanding thermal stability and high load carrying capacity. The Alpha SP range is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure that starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP range is fully compatible with nitrile, silicone and fluropolymer seal materials. Alpha SP is classified as follows: DIN Classification is CLP The Alpha SP range meets the requirements of: DIN 51517 Part 3 AGMA 9005 - D94 US Steel 224 David Brown Type E Hansen Transmissions Flender Suitable for Müller Weingarten equipment Clean gear additive technology ensures low deposit formation and enhanced filter life. Full Extreme Pressure (EP) performance* gives maximum protection of gears against wear and shock-loading. Good water separation and demulsification characteristics means reduced down time through prolonged lubricant life and increased equipment reliability. High protection against corrosion and wear resulting in less maintenance.
Cooledge BI General purpose soluble metalworking fluid Castrol Cooledge BI is a general purpose soluble metalworking fluid which is chlorine and boron-free. It contains a unique additive package that provides good lubrication properties and performs well in a wide waterrange.cooledge BI can be used in single sump machines as well large systems. Cooledge BI is a versatile product recommended for general machining on low-medium alloy steel and aluminium alloys. Boron free for environmental compliance and improved residue characteristics Chlorine and nitrite free to fulfill your local legislation, waste treatment and environmental requirements Versatile product suitable for wide range of materials and operations Low foam in recommended water conditions
Ilocut 154 Neat cutting oil Castrol Ilocut 154 is a neat cutting oil containing a sulphurised fatty additive (non-staining) in a solvent refined mineral oil. Castrol Ilocut 154 is a general purpose neat cutting oil ideal for repetition work on automatic and manual machine tools for free machining ferrous metals such as irons, neckels and steels to 80 tons tensile. Also for repetition work and high speed spindle automatics machining copper and aluminium alloys. Excellent general purpose neat cutting oil wide range of machining operations and metals. Non staining additives use on both ferrous and non-ferrous metals. Viscosity controlled to maximize lubrication in the cutting zone yet minimizes losses due to swarf and component drag-out.
Iloform TDN 81 Neat forming oil Castrol Iloform TDN 81 is a medium viscosity, chlorinated, heavy duty forming fluid. It is a blend of high performance extreme pressure and lubricity additives in a fully solvent refined paraffinic mineral oil. Iloform TDN 81 is specially formulated for use in heavy duty deep drawing applications where extreme performance is required.it is suitable for use on medium to heavy gauge steels, stainless steel, and nickel alloy steels, as well asaluminium and aluminium alloys.iloform TDN 81 is also recommended for use in stainless steel and alloy steel tube cold pilgering operations,where it is applied as an outer diameter roll lubricant, as well as machine gear box lubricant. Contains high performance, extreme pressure additives, which provide very high resistance to temperature and pressure, and high resistance to wear. Enhanced tool and die life, cuts downtime and reduces tooling costs. Provides a homogenous and tenacious lubricating film. Maintains excellent performance in high throughput, or multi stage operations. Consistent, high surface quality. Flexibility. Suitable for use on a wide range of applications and materials. Allows potential for product rationalisation. Low odour and light colour. Excellent operator acceptance.
Spheerol EPL Bearing Grease Castrol Spheerol EPL range of greases are lithium based products containing highly refined mineral oils and fortified with extreme pressure (EP) additives as well as corrosion and oxidation inhibitors. These greases have been formulated with additives that provide good film strength under medium to high loads. The Spheerol EPL range are general purpose greases designed for plant wide lubrication. The range extends from a NLGI 2 for general purpose bearing lubrication to a NLGI 00 semi-fluid grease suitable for centralised lubrication systems and grease filled gearboxes. These greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common. High mechanical stability the grease keeps its consistency in service ensuring long lubricant life Good adhesion continuous lubrication and reduced consumption as film stays between lubricatedsurfaces Good water resistance the grease film remains on the surface even in the presence of water Resistant to copper and steel corrosion helps prevent rust and oxidation on metal surfaces Excellent EP and anti-wear properties protects equipment against extreme loading and helps minimisebearing component wear
Premium Heavy Duty Grease Castrol Premium Heavy Duty Grease is a high performance, multipurpose lithium complex grease developed using an optimised combination of high quality base oils, lithium complex thickener technology and a specially selected additive system enabling reliable performance across a wide range of applications and operating conditions. In addition, Castrol Premium Heavy Duty Grease also contains polymer technology enhancing adhesive properties andstability in the presence of water. Castrol Premium Heavy Duty Grease offers excellent levels of performance for both on and off-highway vehicles and associated equipment across a wide range of operating conditions.castrol Premium Heavy Duty Grease combines excellent structural stability and water resistance with a broad operating temperature range making it particularly suitable for use in plain and rolling element bearings in applications such as heavy construction equipment and the wheel bearings of vehicles fitted with disc brakes. Lithium complex thickener technology imparting excellent structural stability at elevated temperatures ensuring consistent performance across a wide range of conditions. The inclusion of polymer technology enhances adhesion and water resistance enabling extended relubrication intervals and reduced maintenance. High quality base oils in combination with polymer technology enable improved film strength at higher operating temperatures. Excellent corrosion protection properties offer protection under wet conditions ensuring extended component life. High level of structural stability provides better resistance to vibration in heavy duty applications enabling extendedservice life.