Photoelectric sensors: Series 3#30 & 3#31 ü Complete miniature sensor series mm in rugged Crastin housings ü Shock & vibration resistant due to fully vacuum-potted electronics ü Diffuse sensors with precise background suppression ü Polarizing filter (reflex sensors) ü High system reserves (excess gain) ü Pre-failure warning (pollution monitoring) ü Changeover outputs ü Analog outputs (according to IEC 60947-5-2) Housing material Hysteresis Supply voltage range U B Max. ripple content 20 % Output current (total of both outputs) Output voltage drop Max. switching frequency // Bandwidth (-3 db) Switching time ( and ) Max. ambient light: halogen sun Complete miniature sensor series in rugged Crastin housings mm. Shock and vibration resistant with high system reserves (excess gain) and changeover outputs. Diffuse sensors with precise background suppression or analog output as well as polarized reflex sensors. Pollution monitoring (green LED) in case of reduced system reserves (excess gain) prevents downtime caused by pollution. Particularly suited for: ü handling systems ü printing industry ü wrapping machines ü vending machines ü semiconductor industry ü electronics industry ü conveyor systems ü assembly machines ü inserters & sorting machines Glass-fiber reinforced PBTP (Crastin) 10 % typ. / 15% typ. (LA#-3130-119) 10...36 VDC/15...36 VDC (LA#-3130-119) 200 ma / --- (LA) 2.0 V at 200 ma / --- (LA) 1,000 Hz/500 Hz (LH)//500 Hz @ s=50mm (LA) 0.5 msec / 1 msec (LH) / --- (LA) 5,000 Lux 10,000 Lux Ambient temperature range -25... +55 C Degree of protection IP 67 / IP 65 (3031) EMC protection: IEC 60947-5-2 (7.2.3.1) IEC 61000-4-2 5 kv IEC 61000-4-3 Level 3 IEC 61000-4-4 Level 3 IEC 61000-4-6 Short-circuit protection Polarity reversal protection Power-on reset Level 2 / Level 3 (3#31 + LA) Level 2 (3131 + LA) Built-in Built-in Built-in / --- (LA) 164 Detailed data sheets for these products can be found on the Contrinex website:
Diffuse sensor 1,200 mm Diffuse sensor with background suppression 200 mm Sensing range (setting range) 1,200 mm 200 mm (15... 200 mm) Standard target 200 x 200 mm white 100 x 100 mm white No-load supply current 20 ma 25 ma Emitter IR LED 880 nm LED red 660 nm Approvals CE, UL, RoHS CE, RoHS Weight (cable / connector model) 75 / 17 g 75 / 17 g NPN changeover outputs / cable LTK-3030-101 LHK-3130-101 NPN light-on + excess gain* / cable LTK-3030-102 LHK-3130-102 NPN changeover outputs / S8 LTS-3030-101 LHS-3130-101 NPN light-on + excess gain* / S8 LTS-3030-102 LHS-3130-102 PNP changeover outputs / cable LTK-3030-103 LHK-3130-103 PNP light-on + excess gain* / cable LTK-3030-104 LHK-3130-104 PNP changeover outputs / S8 LTS-3030-103 LHS-3130-103 PNP light-on + excess gain* / S8 LTS-3030-104 LHS-3130-104 Compatible connectors (page 268) E, F E, F Wiring (pages 198-199) Diagram 2 Diagram 2 * reception indication (for LH) reduction in gray 18% white 90% black 6% on white paper (90%) Inductive Photoelectric Optical fibers Ultrasonic Capacitive Cables & connectors Accessories Glossary Index www.contrinex.com 165
reflex sensor (polarized) 4,000 mm through-beam sensor 12,000 mm Sensing range 4,000 mm 12,000 mm Reflector (page 197) Reflector type 3 --- No-load supply current 20 ma 10 ma (R) / 15 ma (E) Emitter LED red polarized 660 nm IR LED 880 nm Approvals CE, UL, RoHS CE, UL, RoHS Weight (cable / connector model) 80 / 18 g 150 / 34 g (R and E) (R) receiver / (E) emitter NPN changeover outputs / cable LRK-3030-101 LLK-3030-001 (R) / LLK-3030-000 (E) NPN light-on + excess gain / cable LRK-3030-102 LLK-3030-002 (R) / LLK-3030-000 (E) NPN changeover outputs / S8 LRS-3030-101 LLS-3030-001 (R) / LLS-3030-000 (E) NPN light-on + excess gain / S8 LRS-3030-102 LLS-3030-002 (R) / LLS-3030-000 (E) PNP changeover outputs / cable LRK-3030-103 LLK-3030-003 (R) / LLK-3030-000 (E) PNP light-on + excess gain / cable LRK-3030-104 LLK-3030-004 (R) / LLK-3030-000 (E) PNP changeover outputs / S8 LRS-3030-103 LLS-3030-003 (R) / LLS-3030-000 (E) PNP light-on + excess gain / S8 LRS-3030-104 LLS-3030-004 (R) / LLS-3030-000 (E) Compatible connectors (page 268) E, F E, F Wiring (pages 198-199) Diagram 2 Diagram 2 (R) / 4 (E) 166 Detailed data sheets for these products can be found on the Contrinex website:
Sensing range Standard target No-load supply current Emitter Approvals Response curve: Weight (cable / connector model) NPN changeover outputs / cable NPN light-on + excess gain / cable NPN changeover outputs / S8 NPN light-on + excess gain / S8 PNP changeover outputs / cable PNP light-on + excess gain / cable PNP changeover outputs / S8 PNP light-on + excess gain / S8 Compatible connectors (page 268) fiber-optic amplifier * 120 mm 120 mm (with LFP-1002-020) 100 x 100 mm white 20 ma LED red 660 nm CE, UL, RoHS 78 / 18 g LFK-3030-101 LFK-3030-102 LFS-3030-101 LFS-3030-102 LFK-3030-103 LFK-3030-104 LFS-3030-103 LFS-3030-104 E, F Wiring (pages 198-199) Diagram 2 * Optical fibers (pages 200-219) Inductive Photoelectric Optical fibers Ultrasonic Capacitive Cables & connectors Accessories Glossary Index www.contrinex.com 167
Diffuse sensor 600 mm Diffuse sensor with background suppression 200 mm reduction in gray 18% white 90% black 6% on white paper (90%) Sensing range (setting range) 600 mm 200 mm (15... 200 mm) Standard target 200 x 200 mm white 100 x 100 mm white No-load supply current 15 ma 25 ma Emitter IR LED 880 nm LED red 660 nm Approvals CE, UL, RoHS CE, RoHS Weight (cable / connector model) 75 / 17 g 75 / 17 g NPN light-on / cable LTK-3031-301 LHK-3131-301 NPN dark-on / cable --- --- NPN light-on / connector S8 LTS-3031-301 LHS-3131-301 NPN dark-on / connector S8 --- --- PNP light-on / cable LTK-3031-303 LHK-3131-303 PNP dark-on / cable --- --- PNP light-on / connector S8 LTS-3031-303 LHS-3131-303 PNP dark-on / connector S8 --- --- Compatible connectors (page 268) A, B A, B Wiring (pages 198-199) Diagram 1 Diagram 1 168 Detailed data sheets for these products can be found on the Contrinex website:
reflex sensor (polarized) 2,000 mm through-beam sensor 6,000 mm Sensing range 2,000 mm 6,000 mm Reflector (page 197) Reflector type 3 --- No-load supply current 15 ma 10 ma (R) / 15 ma (E) Emitter LED red polarized 660 nm IR LED 880 nm Approvals CE, UL, RoHS CE, UL, RoHS Weight (cable / connector model) 80 / 18 g 150 / 34 g (R and E) (R) receiver / (E) emitter NPN light-on / cable --- --- NPN dark-on / cable LRK-3031-302 LLK-3031-202 (R) / LLK-3031-200 (E) NPN light-on / connector S8 --- --- NPN dark-on / connector S8 LRS-3031-302 LLS-3031-202 (R) / LLS-3031-200 (E) PNP light-on / cable --- --- PNP dark-on / cable LRK-3031-304 LLK-3031-204 (R) / LLK-3031-200 (E) PNP light-on / connector S8 --- --- PNP dark-on / connector S8 LRS-3031-304 LLS-3031-204 (R) / LLS-3031-200 (E) Compatible connectors (page 268) A, B A, B Wiring (pages 198-199) Diagram 1 Diagram 1 (R) / 4 (E) Inductive Photoelectric Optical fibers Ultrasonic Capacitive Cables & connectors Accessories Glossary Index www.contrinex.com 169
fiber-optic amplifier * 60 mm Response curve: Sensing range Standard target No-load supply current Emitter Approvals Weight (cable / connector model) 60 mm (with LFP-1002-020) 100 x 100 mm white 15 ma LED red 660 nm CE, UL, RoHS 78 / 17 g NPN light-on / cable LFK-3031-301 NPN dark-on / cable LFK-3031-302 NPN light-on / connector S8 LFS-3031-301 NPN dark-on / connector S8 LFS-3031-302 PNP light-on / cable LFK-3031-303 PNP dark-on / cable LFK-3031-304 PNP light-on / connector S8 LFS-3031-303 PNP dark-on / connector S8 LFS-3031-304 Compatible connectors (page 268) A, B Wiring (pages 198-199) Diagram 1 * Optical fibers (pages 200-219) 170 Detailed data sheets for these products can be found on the Contrinex website:
with analog output Sensing range diffuse sensor 10... 100 mm diffuse sensor 10... 100 mm Sensing range 10... 100 mm 10... 100 mm Standard target 100 x 100 mm white 100 x 100 mm white No-load supply current 25 ma 25 ma Emitter LED red 660 nm LED red 660 nm Voltage output 0... 5 V 0... 10 V Current output 1... 5 ma 4... 20 ma Approvals CE, RoHS CE, RoHS Weight (cable / connector model) 75 / 17 g 75 / 17 g Voltage and current outputs / cable LAK-3130-109 LAK-3130-119 Voltage and current outputs / S8 LAS-3130-109 LAS-3130-119 Compatible connectors (page 268) E, F E, F Wiring (pages 198-199) Diagram 9 Diagram 9 black gray white black gray white Inductive Photoelectric Optical fibers Ultrasonic Capacitive Cables & connectors Accessories Glossary Index www.contrinex.com 171