JOB CATALOGUE Μάρτιος / Απρίλιος 2014 Θα θέλαμε να σας παρουσιάσουμε τις θέσεις που η Grecruitment έχει κληθεί να καλύψει σε επιχειρήσεις με έδρα στην Ελβετία, στη Γερμανία, στο Λίχτενσταϊν και στην Ολλανδία. Αν ενδιαφέρεστε για κάποια από τις ακόλουθες θέσεις, θα σας παρακαλούσαμε να στείλετε το αγγλικό ή γερμανικό βιογραφικό σας στην ηλεκτρονική μας διεύθυνση info@grecruitment.com με θέμα «Προσωπικές Συνεντεύξεις», ακολουθούμενο από τον τίτλο της θέσης. Αποστολή Βιογραφικών μέχρι και Δευτέρα 10 Μαρτίου. Οι θέσεις είναι για πρόσφατα απόφοιτους ή για επαγγελματίες με μικρή εμπειρία, και οι προεπιλεχθέντες Μηχανικοί και Ειδικοί ΙΤ θα κληθούν για προσωπική συνέντευξη την Παρασκευή 14 Μαρτίου σε συνέχεια της εκδήλωσης «Αξιοποίησε τις γνώσεις σου, Διεκδίκησε την κατάλληλη θέση». Περισσότερα για την εταιρεία και τη δραστηριότητά μας μπορείτε να βρείτε στην ιστοσελίδα μας www.grecruitment.com και για οποιαδήποτε περαιτέρω διευκρίνιση, μπορείτε να μας καλέσετε στο 2313019150. Mechanical Design Engineer (f/m), Stuttgart...3 Junior R&D Engineer (f/m), berlin...3 CAD Designer,Boblingen...3 CAE Engineer (f/m), Liechtenstein...4 R&D Engineer, Munich...4 Project Engineer Thermodynamics, Zurich...5 Mechatronics Engineer (f/m), Stuttgart...5 Tester Wafer Stage, Eindhoven...6 Electronics Design Engineer (m/f), Bern...6 3 Electrical / Mechatronics Engineer, Cologne...7 Automotive Development Engineer HW/SW, Nuremberg...7 Electrical Engineer (f/m) Network Simulation, Hanover...8 Development Engineer - Antenna Systems (m/f), Stuttgart...8 Development Engineers / Interior (Vehicle Diagnostics), Ingolstadt...9 2 Test Engineers for Infotainment Systems / HMI (f/m), Munich...10 Civil Engineer (m/f) - Steel Structures, Zurich....10
Πολιτικός Μηχανικός για Μονάδα Υδροηλεκτρικής Ενέργειας, Βέρνη...10 Structural Graduate Engineer (m/f), Frankfurt...11 Junior CISCO Engineer (f/m), Geneva....11 Software Developer.NET, Lucerne....12 Junior System Engineer, Hanover...12 Software Developer C, Leipzig......12 ios Mobile Application Developer iphone και ipad, Munich...13 Wireless Telco Engineer, Athens...13 3D Graphics Developer, Athens.....14 Grecruitment is a Thessaloniki based cross border recruitment consultancy and the pioneer in recruitment when it comes to support Greek professionals in finding a job abroad. Our service is free of charge and without any obligation for the candidates.
Mechanical Design Engineer (f/m), Stuttgart - Design and develop products for quality improvement - Be responsible for special customer requirements - Ensure completion on time and within budget - Full documentation of the modified products - Manage detailed construction The Candidates Profile: - Master/Diploma in Mechanical Engineering or equivalent - academic experience in the development of high-pressure components - Advanced knowledge of MS Office, SAP, Lotus Notes and CAD (Pro/E, Solid Works) - Strong communication skills in English and German - Good organizational & communication skills Junior R&D Engineer (f/m), berlin On behalf of our client based in Berlin, we are looking for a R&D Engineer, who will take up duties in the Fastening and Applications department. Your responsibilities - Guide innovative fastening solutions - Participate in the development and implementation - Work in cooperation with project teams on other R&D levels Your profile - Ph.D. / M.Sc./ Diploma / B.Sc. in Mechanical Engineering - Solid knowledge in design of technical systems - Ability to interact within interdisciplinary project teams - Excellent English communication skills, very good German skills also Required CAD Designer, Boblingen Job description: Design and carry out the necessary calculations with CAE systems Be responsible for all related documentation Plan and design HVAC systems for buildings Support the project manager For this position we are looking for a candidate with: University/Technical Diploma in Mechanical Engineering or equivalent
Experience in the field of heating/ventilation/cooling Analytical and conceptual thinking Willingness to work in a team Very good knowledge of CAD (AutoCAD) / pit-cad. Knowledge of CATS / MicroStation / Triplan would be a great advantage. B2 level German and up, Fluent English Our client offers: Development of interesting and diverse projects Independent Work Project A motivated team Payment on the basis of performance and work experience CAE Engineer (f/m), Liechtenstein - Comparison and validation of CAE analyses against test results - Optimization of vehicle and component performance in close cooperation with Body Design and Chassis Team - Development of CAE and test methods The Candidates Profile: - Master/Diploma in Mechanical Engineering or equivalent - Experience in CAE analyses - Good knowledge of Nastran, HyperWorks, Abaqus, CATIA V5 - Strong communication skills in English and German - Good organizational & communication skills R&D Engineer, Munich On behalf of our client, a german company specialized in compressed air and vacuum products manufacturing, we are looking for an R&D Engineer. Duties & Responsibilities: Finite Element simulations within structural mechanics. Linear and nonlinear, static and dynamic. Fatigue calculations. Development of fatigue calculation tools Design and performance optimization of compressors Generate ideas for new products within the compressor business Develop analytical, experimental and numerical methods Co-operate with experts from universities, research institutes and factories Candidate profile: PhD/MSc degree in Engineering (focus in FE and fatigue calculations)
Solid knowledge of: Structural mechanics, dynamics, fatigue, mechanics of materials and mathematics Communicative and resourceful, troubleshooter Able to work within an interdisciplinary team as well as independently Analytical thinking and working style for complex problems Very good English and German language skills Creative and keen to innovation Excellent organizational and communication skills Project Engineer Thermodynamics, Zurich - Plan, develop and analyze data from experiments/simulations on thermal materials and products - Define and design new test rigs for measuring temperatures, heat-fluxes And airflows according to customer requirements - Provide ideas, develop solutions and improve product innovation projects - Communicate and provide input to colleagues and customers worldwide. - support numerical simulations The Candidates Profile: - Master/Diploma in Aerospace/Mechanical Engineering or Physics - Advanced knowledge of heat transfer, mass transfer, thermodynamics, fluid mechanics and the structural and mechanical principles - Good knowledge of one or more of the following CAE programs is a strong plus: Radtherm, Star- CCM+, Matlab, NX - Fluent knowledge of English required and basic knowledge of German is an important requirement - Good communication skills and stress-resistant personality Mechatronics Engineer (f/m), Stuttgart - Plan and check maintenance and repair work - Organize and improve maintenance foreman s office - Make safe the availability of plant and machinery - Work as a team in the planning and check the investment budget - Coordinate the workflow order The Candidates Profile: - Master/Diploma in Electrical Engineering, Physics or Mechanical engineering With specialization in mechatronics - Academic experience with position measurement systems, handling systems, control engineering, actuator design and dynamics will be an asset - Good understanding of quality and cost - Advanced knowledge of PC software (SAP, MS Office) - Fluent English and German - Willingness to work flexible hours
Tester Wafer Stage, Eindhoven Connection of wafer stage to the testing and placement of PM s Carry out mechanical adjustments Functional testing of the wafer stage and / or Position Modules Analysis and solving of minor disturbances as well as escalation of major disturbances Disconnection of wafer stage and transfer to upstream customer. Process: Plan and prioritize own work; Report, inform and escalate correctly and timely on progress and status Identify structural issues and support Engineering during diagnostics Actively seek for relevant knowledge; Share and train knowledge and skills. Assemble, adjust, test and deliver the company s products according to agreed specifications and delivery times. Report to the Team Leader Wafer Stage. The Candidate's Profile: BSc in Electronics/ Applied Physics/ Mechanical engineering/ Mechatronics/ Aerospace Engineering Hands-on experience in a high-tech production or customer service environment, e.g. electronics, mechanical engineering, mechatronics, aerospace engineering; Proven affinity with testing / assembling and troubleshooting is essential. Ability to work in multi-disciplinary teams within a high-tech environment Ability to deal with, and enjoy high degree of uncertainty and pressure Independent, pro-active, flexible team player personality Analytical: Solving problems; Methodical: Can work according to standard work practices; Assertiveness: In the lead to process engineering and development; Eager to learn and expand skills; Willingness to share and train knowledge and skills; Flexible to work in a 7x24 schedule; Ability to work alone, including night shifts. Fluent English Electronics Design Engineer (m/f), Bern - Participation in interdisciplinary projects - Design, development, simulation and verification of analog and digital electronic circuits - Optimization of electronic circuits with respect to manufacturability, cost and functionality through new concepts or by monolithic integration - Direct negotiation with suppliers and customers
The Candidates Profile: - Bachelor Degree in Electronics / Electrical Engineering - Academic experience in analog and digit circuits - Good German and English - Team spirit 3 Electrical / Mechatronics Engineer, Cologne A medium-sized engineering service provider and equipment manufacturer based in Cologne is looking for several Electrical or Mechatronics Engineers to work on various projects on automation technology and software solutions. Job Description: - Support and lead the development, coordination, planning, and execution of the electrical, instrumentation, & controls system requirements for the company s projects - Liaison with project managers & clients on project requirements including design specifications & equipment procurement, manufacturing, and delivery schedules - Coordination of electrical/controls, sub-contractors or start-up personnel to deliver the electrical instrumentation and controls portion of turn-key projects on schedule - Ensuring adequate quality assurance of all deliverables Requirements: - Diploma / M.Sc. / B.Sc. in Electrical or Mechatronics Engineering or equivalent - Solid knowledge in machine design and PLC programming will be an asset - Ability to read and understand electrical schematics - Knowledge of E-Plan or another electrical CAD program - Ability to do the complete testing Automotive Development Engineer HW/SW, Nuremberg Development of customized and own camera-monitor systems for the commercial vehicle industry Calculation and simulation of digital circuits Schematic capture and EMC-compliant circuit board design with Altium Designer
Commissioning and unit testing of hardware and software components Creation of solutions in the project team Technical coordination and collaboration with external development partners Documentation of the results The Candidate's Profile: Degree in Electrical Engineering (m / f) or comparable training. Recent graduates are welcome too. Experience in the design of electronic circuits and EMC-compliant layouts Experience in programming microcontrollers Familiarity with Altium Designer and / or Eagle Basic knowledge of FPGA programming ideally knowledge in the field of video image processing Good German and English skills Electrical Engineer (f/m) Network Simulation, Hanover We are looking to fill a position in a world leading energy company with an Electrical Engineer. Your responsibilities: Carrying out dynamic technical grid simulations of wind farms Checking the network connection criteria and the electro-technical design of wind farms Providing technical assistance in network connectivity issues and implementation of system studies Your Qualification: M.Sc./ Diploma / B.Sc. in Electrical Engineering, preferably with a focus on Energy Management / Energy Technology Deep knowledge in the areas of network simulation, grounding systems, grid connection and network protection Experience in a similar position is an advantage, but not mandatory Very good German and good English knowledge Excellent team and communication skills Development Engineer - Antenna Systems (m/f), Stuttgart Representing one of the world's leading providers of mobile communication systems, we are looking for an Antenna Systems Engineer to join the
Development team Tasks: Personal responsibility for development of antenna systems in the following areas: - Built-in antenna systems for AM / FM, FZV, DAB, TV, etc. - Modern communication (eg. LTE, DSRC, Car 2 Car ), and satellite antennas (eg GPS, SDARS ) Optimization of existing antenna structures and antenna layouts in close coordination with internal departments and external partners Participation in project teams for various clients in the field of antenna systems development Creation of process documentation and presentation to the client Requirements: University degree in Electrical or Telecommunications Engineering with a focus on High -Frequency technology Ideally, several years of relative experience, however qualified recent graduates are welcome to apply Very good understanding of the requirements of antenna systems and electronic circuits Extensive knowledge of tool antenna simulation programs, particularly in the area RF technology and EMC (eg. EMSS FEKO, CST Microwave Studio) Good technical knowledge of English spoken and written, also good German language skills Development Engineers / Interior (Vehicle Diagnostics), Ingolstadt Duties & Responsibilities Application of Development / Test sequences on the basis of software tools (DSA) Formulation of specifications Creation of software components in Java Creation of test instructions Training the customers teams What you should bring with Electrical Engineering or equivalent education (BA/MSc) In-depth knowledge in the area of vehicle diagnostics (bus systems, protocols, ODX) Strong interest in automotive electrical and electronics Programming skills in Java or other object-oriented programming language Very good English, good German
2 Test Engineers for Infotainment Systems / HMI (f/m), Munich Your Duties - Planning and development of test concepts and specifications - Creation of test cases and test plans - Carrying out the testing in the workplace, in the laboratory and the vehicle - Creation and implementation of concepts for test automation - Recording and analysis of traces - Documentation of test results and creating metrics - Analysis of the results together with the development team The Ideal Candidate s Profile - University degree in Electrical engineering or a comparable qualification - Fluent English skills and very good German knowledge - Team spirit and ability to work independently - Previous similar academic or professional experience will be an asset Civil Engineer (m/f) - Steel Structures, Zurich Your responsibilities Create Static Calculations for industrial and bridge constructions as well as for offshore structures Provide assistance in assessing structural engineering certificates Site supervision and monitoring activities of engineering structures Your profile Successfully completed a degree in Civil engineering, ideally with constructive specialization Very good knowledge in structural steel design and structural analysis Previous professional experience is an asset, recent graduates are welcome to apply Independent, responsible working style, ability to work also within a team Fluent German and English Πολιτικός Μηχανικός για Μονάδα Υδροηλεκτρικής Ενέργειας, Βέρνη H Grecruitment αναζητά για πελάτη της, Εταιρεία Παροχής Ενέργιεας, στην ευρύτερη περιοχή της Βέρνης: Πολιτικό Μηχανικό για Μονάδα Υδροηλεκτρικής Ενέργειας Ο πελάτης μας απασχολεί στην Ελβετία περισσότερους από 3000 εργαζομένους προσφέροντας ολοκληρωμένες υπηρεσίες στον κλάδο της Ενεργειας. Επιθυμητή αλλά όχι απαραίτητη η προϋπηρεσία στον τομέα.
Ο ιδανικός υποψήφιος είναι Πολιτικός Μηχανικός (ΑΕΙ) με βασικές γνώσεις σε υδραυλικές κατασκευές και έργα υποδομής, ο οποίος θα αναλάβει τη διεξαγωγή έργων της εταιρείας. Απαραίτητη η καλή γνώση Γερμανικών και άριστες γνώσεις Η/Υ. Επιθυμητά τα Γαλλικά και τα Αγγλικά. Structural Graduate Engineer (m/f), Frankfurt - Willingness to gain valuable experience working within a well-established technical team and high profile company - Ability to work to tight timescales whilst ensuring high quality output and excellent customer service at all times The Candidates Profile: - Degree in Civil / Structural Engineering, with knowledge of soil mechanics and structural analysis - Knowledge in designing temporary works retaining walls - Well-organized and focused individuals, with focus on detail - Fluent English and German - Previous use of AutoCAD software is also necessary Junior CISCO Engineer (f/m), Geneva Handling incident tickets as well as customer calls Support Cisco Unified Collaboration solutions Perform move, add, changes for managed customers. Interact with the company s Network Operation Center user). The Candidate's Profile: Cisco CCNA or CCNA Voice (mandatory) Cisco Unified Collaboration support experience with Enterprise type accounts A minimum of one year experience with Cisco Unified Communications Manager, Unity Connection, Presence and IM is an asset PBX experience (Siemens, Alcatel, Nortel, Avaya) Other Skills Excellent command of French language Good communication skills in English or German is an additional asset Prior experience in Production Support Customer orientated Strong troubleshooting skills Ability to reason and think logically Display willingness to help others, a pleasant personality, a courteous manner, and a professional demeanor Ability to apply judgment, implement solutions, and resolve conflicts, all in a multi-tasked environment
Software Developer.NET, Lucerne - Develop individual software solutions based on Microsoft technologies - Carry out development work - Create software designs and concepts within the framework of prescribed systems and software architecture - Object-oriented analysis and design in the development process - Assist in the development of new products or the improvement of existing ones The Candidate's Profile: - Engineering degree (Computer Science, Business Information Systems) - Practical experience with.net and C# technologies is an asset - Basic knowledge of WPF/WCF and Silverlight - Experience with Web-technologies (XML, XSL) - Knowledge of Automated Unit Testing - Excellent English communication skills Junior System Engineer, Hanover You are involved in the specification of the vehicle functions. You design together with our experts, the Software in conjunction with the electronics and bus systems. You implement parts of the software and test it. You integrate into the team, the software in several steps into the vehicle and check for proper implementation. You model, deploy and test the vehicle with the latest software development methodologies. The Candidate's Profile: A degree in computer science, computer science or equivalent technical training Interest in technical systems In studies or projects acquired in solid programming skills Ideally some knowledge of software development methodologies such as UML or V-model Good German and English, spoken and written Software Developer C, Leipzig You will be working on a wide range of applications running on hardware, virtual machines or in the Cloud. You will assume an active part in the product development lifecycle, which
includes the design, implementation, documentation and testing of the solution. The Candidate's Profile: University degree in computer science Excellent knowledge of Unix (BSD flavors or Linux) Excellent knowledge of C Good knowledge of Python or Ruby Very good English skills Experiences involving BSD/Linux Kernel, open source projects, or shell scripting Knowledge of software engineering concepts Knowledge of network routing protocols Interest in network security and exploits ios Mobile Application Developer iphone και ipad, Munich H Grecruitment αναζητά για πελάτη στον κλάδο του ηλεκτρονικού εμπορίου, στην ευρύτερη περιοχή του Μονάχου, υποψήφιο για την ανάπτυξη λογισμικού ios για φορητές συσκευές iphone και ipad Αρμοδιότητες Ο υποψήφιος θα είναι υπεύθυνος για τη βελτίωση και συντήρηση εφαρμογών iphone της εταιρείας, για την ανάπτυξη και το σχεδιασμό εφαρμογών ipad και την προσθήκη πρόσθετων εφαρμογών σε εφαρμογές iphone και ipad. Προφίλ Πτυχίο Πληροφορικής ή συναφούς αντικειμένου Επιθυμητές γνώσεις σε Objective-C, Cocoa, Xcode, ios SDK/ Επιθυμητή εμπειρία ανάρτησης εφαρμογών στο Apple Store Επιθυμητή εμπειρία 1 έτους στην ανάπτυξη εφαρμογών σε ios Επιθυμητή εμπειρία σε Git, Webservices και Json Επιθυμητή γνωσή του Photoshop Άπταιστα γερμανικά & αγγλικά Wireless Telco Engineer, Athens Job Description Main responsibility: Network design, installation, integration, maintenance, troubleshooting and operation (work remotely) International travel required (10%- mainly in the MENA region) Candidate s profile BSc/ MSc in Telecommunication/ Wireless Communication or relevant studies. Experience working in a field installation role is essential Ability to work effectively and value as a team member
Demonstrate technical knowledge and consultative skills Strong problem solving skills: ability to assess a problem and determine an effective course of action Excellent written and verbal communication, listening and strong presentation skills Candidates must be able to communicate in English language, French will be an asset 3D Graphics Developer, Athens Be responsible for designing, developing, deploying, and maintaining advanced graphics technology. Collaborate with technical artists on technology used to create cutting edge graphics. Solve challenging problems that are often not well defined by writing a lot of elegant and practical code. Be a champion for the user: Insist on the highest standards, and create functional and well-designed technology that delights our artists. The Candidate's Profile: Bachelor's degree in Computer Science or Computer Engineering (or equivalent) experience. Strong software engineering fundamentals and strong C++ and C programming skills (Microsoft or GNU) Experience designing user interfaces incorporating 3D graphics technology Understanding of software development practices (OO code development, code revisioning) Knowledge of 3D graphics API (OpenGL or DirectX) and general 3D engine design (raytrace engine pipeline knowledge will be considered a plus) Familiarity with Solid Modeling and Computational Geometry Experience with at least one modelling tool (e.g. Trimble SketchUp, Autodesk 3DS Max, Maxon Cinema 4D) and authoring of applications using available SDKs Great communication skills and ability to work effectively on shared projects with designers, artists, testers, and other developers. Excellent Greek & English language skills