behr equipment for foodstuffs analysis behr Labor-Technik

F behr equipment for foodstuffs analysis behr Labor-Technik

Determination of total protein content: Determination of Kjeldahl nitrogen The behr equipment for determination of Kjeldahl nitrogen offers the user a complete individually configurable solution for the laboratory. Sample Digestion Units The sample digestion units of the behrotest InKjel line are provided with powerful infra-red heating elements. The quality and positioning of the infra-red heating elements guarantee the user reproducible heating phases and digestion temperatures at all sample positions. This also pertains to the twelve sample digestion unit, in which the samples are arrayed in two rows of six each. Direct irradiation of the samples by the infra-red sources eliminates the painfully slow warm-up phase associated with conventional heating block units. InKjel 625 M Thus, the behrotest InKjel is the ideal rapid digestion unit for the Kjeldahl nitrogen determination and other high temperature sample digestions. Steam distillation units The behr steam distillation units of the S model series are the optimal complement to the InKjel rapid digestion units. Depending on the user s requirements, he may choose between one manual and two automatic steam distillation models. These are similar in concept, but differ in the level of automation and convenience features. The top-of-the-line model, the behr S 5, is designed to accept an external titrator. All behr steam distillation units have the following common features: Powerful and fast Practical and user-friendly Exemplary safety and reliability Sturdy chemically resistant stainless steeel housing Practical quick-release vessel clamp permits easy use with right or left hand Especially simple menu-driven operation of the programmable apparatus by means of one single control knob InKjel 625 P Fume exhaust system The two-stage behrosog fume exhaust system condensate trap plus neutralization stage keeps all acid fumes completely out of the environment. Titration stations The behrotest STI manual titration station or an automatic titrator provide for reliable, safe and rapid titration into complete the nitrogen determination. behrosog 2 2

behrotest InKjel Infra-red Rapid Digestion Units The basic units in the behrotest InKjel model series hold insertable frames for different combinations of vessels: 6 reaction vessels with 250 ml capacity in InKjel 625 (M or P) 12 reaction vessels with 250 ml capacity in InKjel 1225 (M or P) 4 reaction vessels with 500 ml capacity in InKjel 450 (M or P) 4 reaction vessels with 750 ml capacity in InKjel 475 (M or P) If required, the user can re-equip his system himself very easily with different digestion boxes (insertable frame with suction extraction apparatus) for other sample glassware. The behrosog process suction system is available to extract vapours during digestion. All InKjel systems are completely equipped with tiered console, suction system, insertable frame and digestion glass vessels. InKjel Infra-red Rapid Digestion Units: Technical Specifications InKjel P programmable infra-red rapid digestion units 230 VAC/50 Hz Power: 1500 W Dimensions (W x H x D): approx. 540 x 750 x 440 mm Weight: approx. 20 kg Programs: max. 99 Time setting range: 0... 199 min., in steps of 1 min. Heating power levels: 0... 100 %, in steps of 1 % SIMVAC InKjel M manually adjustable infra-red rapid digestion units 230 VAC/50 Hz Power: 1500 W Dimensions (W x H x D): approx. 540 x 750 x 440 mm Weight: approx. 20 kg Heating power level: 0... 100 %, continuously adjustable behrosog 2 scrubber Power: Dimensions (W x H x D): Weight: Pump suction flow rate: 230 VAC/50 Hz 80 W approx. 335 x 480 x 340 mm approx. 18 kg max. 40 l/min STI manual titration station Dimensions (W x H x D): Weight: 230 VAC/50 Hz approx. 330 x 600 x 200 mm approx. 3,5 kg STI 3

Features S 1 S 2 S 3 S 4 S 5 Manual addition of H 2 O - + + + + Manual addition of NAOH + + + + + Manual addition of H 3 BO 3 - + + + + Automatic addition of H 2 O - + + + + Automatic addition of NAOH - + + + + Automatic addition of H 3 BO 3 - - - + + Programmable reaction time - - + + + Programmable distillation time - + + + + S 1 Automatic steam generation + + + + + Variable steam generating capacity (40% - 100%) - + + + + Automatic removal of sample residues by suction - - + + + Number of programs 0 1 1 99 99 Display language can be chosen by the user - + + + + Visual error reports + + + + + Acoustic error reports - + + + + Serial interface (RS232) - + + + + Standby operation between the distillations + + + + + Level monitoring for the set of canisters + + + + + Various behrotest digestion glassware types can be used + + + + + Connection for titration unit - - - - + S 4 Steam Distillation Units: Technical Specifications S 5 TB 1 Power: Cooling water consumption: Distillation time: S 1 S 2 S 3 S 4 S 5 230 VAC, 50 Hz 1700 W approx. 5 l/min approx. 2... 3 min per sample Storage container: any size any size, recommendation: behrotest set of canisters Interface: RS232 Display: LCD Programs: 1 1 100 100 Dimensions (W x H x D in mm) 410 x 675 x 410 Weight: 32 kg 34 kg 35 kg 35 kg 36 kg Connection for titrator: no no no no yes 4

Digestion units 804849998 InKjel 625 M Manually adjustable infra-red rapid digestion unit for six 250 ml sample vessels 804849999 InKjel 1225 M Manually adjustable infra-red rapid digestion unit for twelve 250 ml sample vessels 804849450 InKjel 450 M Manually adjustable infra-red rapid digestion unit for four 500 ml sample vessels 804849475 InKjel 475 M Manually adjustable infra-red rapid digestion unit for four 750 ml sample vessels 804850001 InKjel 625 P Programmable infra-red rapid digestion unit for six 250 ml sample vessels 804850002 InKjel 1225 P Programmable infra-red rapid digestion unit for twelve 250 ml sample vessels 804850003 InKjel 450 P Programmable infra-red rapid digestion unit for four 500 ml sample vessels 804850004 InKjel 475 P Programmable infra-red rapid digestion unit for four 750 ml sample vessels 804849225 InKjel 1225 PE Expansion slave module (without power controller) increases capacity of InKjel 1225 P to 24 samples 804849445 InKjel 450 PE Expansion slave module (without power controller) increases capacity of InKjel 450 P to 8 samples 804849446 InKjel 475 PE Expansion slave module (without power controller) increases capacity of InKjel 475 P to 8 samples Steam distillation units 804849001 S 1 Steam distillation unit, manual operation, distillation time approx. 2 3 min. 804849002 S 2 Steam distillation unit, programmable NaOH addition distillation time approx. 2 3 min. 804849003 S 3 Steam dist. unit, programmable NaOH & water addition, distillation time approx. 2 3 min. 804849004 S 4 Steam dist. unit, programmable NaOH, boric acid & water addition, distillation time approx. 2 3 min. 80 48 49005 S 5 Steam dist. unit, fully automatic, accepts external titrator (e.g. TB 1) 80 48 49006 TB 1 Titration accessory module for the S 5 steam distillation unit 804849030 KAS 30 Reagent container set for S 3, consisting of three 20 liter containers with level sensors 804849040 KAS 40 Reagent container set for S 4 and S 5 consisting of four 20 liter containers with level sensors Catalyst tablets for the Kjeldahl determination 804840103 KT 3 Catalyst tablets (3.5 g K 2 SO 4 ; 0.4 g CuSO 4 ), tin of 1,000 tablets 804840100 KT 1 Catalyst tablets (5.0 g K 2 SO 4 ; 0.5 g CuSO 4 ), tin of 1,000 tablets 804840101 KT 2 Catalyst tablets (5.0 g K 2 SO 4 ; 0.15 g CuSO 4 ; 0.15 g TiO 2 ), tin of 1,000 tablets 804840102 AFS Anti-foam tablets Fume evacuators 804840005 SIMVAC Fume evacuator with water jet pump and neutralization bottle, incl. tube and rack 804840004 behrosog 2 Fume evacuator/neutralization unit with vacuum pump, 40 l/h Manual Titration Station 804842020 STI Manual titration station for the Kjeldahl nitrogen determination Accessories for the Kjeldahl determination 804840104 WB 1 Kjeldahl weighing boats, nitrogen free parchment paper 804841015 SR 3i Round-bottom digestion vessel without std. taper mouth for InKjel digestion unit 804851051 KJ 500 Round-bottom digestion vessel, 500 ml, for InKjel 804851076 KJ 750 Round-bottom digestion vessel, 750 ml, for InKjel 804849983 EG 6 Vessel holding frame for six 250 ml SR 3i vessels in the InKjel 625 digestion unit 804849984 EG 12 Vessel holding frame for twelve 250 ml SR 3i vessels in the InKjel 1225 digestion unit 804849982 EG 4/500 Vessel holding frame for four 500 ml KJ 500 vessels in the InKjel 450 digestion unit 804849978 EG 4/750 Vessel holding frame for four 750 ml KJ 750 vessels in the InKjel 475 digestion unit 804849986 AE 6 Fume exhaust manifold for InKjel 625 804849987 AE 12 Fume exhaust manifold for InKjel 1225 804849985 AE 4 Fume exhaust manifold for InKjel 450 and InKjel 475 5

Soxhlet Extraction The standard method for the determination of free fat in foodstuffs is the Soxhlet extraction. behr equipment for the extraction fulfils the most varied requirements of daily laboratory use. Extractor sizes from 30 to 250 ml. Kompakt units for single sample processing. Heating block units with especially exact temperature control for simultaneously processing up to 6 samples. Extraction systems for four or six samples with linear configuration of individual extrators. Extractors with a specially developed siphon tube guarantee uniformity of extraction in all sample positions. Extractors provided with spigots for draining solvent obviate need to distill solvent before reuse. No rotary evaporator is required. Use of the hydrolysis glassware kit (for 1, 4 or 6 sample units) enables acid digestion to be performed prior to extraction in accordance with the Weibull and Stoldt method for determination of total fat content. Kompakt systems for Soxhlet extraction 804800520 KEX 30 Kompakt-system for 30 ml extraction 804800522 KEX 100 F Kompakt-system for 100 ml extraction, w/ spigot 804800536 KEX 250 F Kompakt-system for 250 ml extraction, w/ spigot Approx. dimensions (H x W x D in cm) KEX 30 KEX 100 KEX 250 71,5 x 23 x 33 71,5 x 23 x 33 80 x 23 x 33 Weight 7,5 kg 7,5 kg 7,5 kg Line voltage 230 VAC, 50/60 Hz 230 VAC, 50/60 Hz 230 VAC, 50/60 Hz Power rating 450 W 450 W 450 W KEX 100 F Equipment for Soxhlet extraction, 5 sample places 804850020 DBAS DET-basic configuration to be supplemented by application-specific accessory kits, consisting of a thermostated aluminum heating block (20 300 C) with five 65 mm dia. cavities for sample vessels, condenser cooling water distributor and time-temperature controller 804850023 DE 30 Accessory kit, for use with the DBAS basic configuration, providing all required additional components for the 30 ml Soxhlet extraction 804850024 DE 100 Accessory kit, for use with the DBAS basic configuration, providing all required additional components for the 100 ml Soxhlet extraction 804850025 DFE 100 Accessory kit, for use with the DBAS basic configuration, providing all required additional components for the 100 ml fat extraction, w/ spigots DBAS + DFE 100 6

Equipment for Soxhlet extraction, 6 sample places 804880020 SMX 30 Workstation for the 30 ml Soxhlet extraction of six samples, complete 804880021 SMX 100 Workstation for the 100 ml Soxhlet extraction of six samples, complete, extractors /w DBAS + DE/DFE SMX 30/SMX 100 Dimensions (H x W x D) approx. 500 x 1000 x 350 mm approx. 500 x 1000 x 350 mm Weight of complete system approx. 37 kg approx. 34 kg Line voltage for heating block 230 VAC, 50/60 Hz 230 VAC, 50/60 Hz Power rating of heating block 1500 W 800 W SMX 100 Extraction systems with linear sample configuration 804880031 R 304 Extraction unit with 4 in-line sample positions, 30 ml 804880032 R 306 Extraction unit with 6 in-line sample positions, 30 ml 804880022 R 106 S Extraction unit with 6 in-line sample positions, 100 ml 804880023 R 104 S Extraction unit with 4 in-line sample positions, 100 ml 804880033 R 254 S Extraction unit with 4 in-line sample positions, 250 ml 804880034 R 256 S Extraction unit with 6 in-line sample positions, 250 ml R 106 S behrotest extraction systems with linear sample configuration are cost-effective and user-friendly solutions for classical Soxhlet and fat extraction requirements: Dimensions (W x H x D) (unit w/o glassware) Weight (unit w/o glassware) Rated voltage R 304, R 104 S, R 254 R 306, R 106 S, R 256 approx. 53 x 74 x 32 cm approx. 76 x 74 x 32 cm 15,1 kg 19,8 kg 230 VAC, 50/60 Hz Power 1440 W 2160 W heating at every sample position is individually adjustable a cooling water distributor provides for uniform cooling of all reflux condensers convenient built-in stand for storing the reflux condensers between extractions holder provided for secure storage of the extractors after removal of the solvent vessel S models: Extractors provided with spigots for draining solvent obviate need to distill solvent before reuse. 7

Acid Digestion Sample Preparation for Extraction Extraction following Acid Digestion The Weibull-Stoldt Method behrotest hydrolysis, complete with: Heating unit with linear sample configuration Rack for 4 or 6 funnels The quantitative determination of the fat content in food is performed by means of a solvent extraction. The free fat is determined by direct extraction. The total 4 or 6 glass funnels, 100 mm PE-bottle, 500 ml, with screwcap with squirttube 100 fluted filter papers fat content is composed of the sum of the free fat and the bound fat, which is released by the acid digestion. Boiling aids Cooling water manifold with condenser rack and connection tubing Beakers ( 600 ml), cold fingers Hydrolysis units 804880028 HYDRO 1 Hydrolysis unit, complete for one sample 804880029 HYDRO 4 Hydrolysis unit, complete for 4 samples HYDRO 6 804880030 HYDRO 6 Hydrolysis unit, complete for 6 samples Technical Specifications Dimensions (W x H x D) HYDRO 1 HYDRO 4 HYDRO 6 approx. 71,5 x 23 x 33 approx. 53 x 74 x 32 cm Weight 7,5 kg 15,1 kg (w/o glassware) Rated voltage 230 VAC, 50/60 Hz approx. 76 x 74 x 32 cm 19,8 kg (w/o glassware) Power 450 W 1440 W 1960 W Accessories for Soxhlet Extraction Stock no. Model Description Glassware Setups Extraction Reaction vessel Extractor Condenser 30 ml 100 ml 30 ml RFK 30 100 ml 250 ml 100 ml RFK 100 250 ml 500 ml 250 ml RFK 250 804841031 EZ 30 Soxhlet ectractor, 30 ml 804830290 PTFE 29 PTFE joint sleeves for EZ 30 804841033 EX 30 HS Extraction thimbles for EZ 30 extractor, package of 25 804841032 EZ 100 Soxhlet extractor, 100 ml 804841035 EZ 100/HAHN Soxhlet extractor, 100 ml, with spigot 804841034 EX 100 HS Extraction thimbles for EZ 100 (HAHN) extractor, package of 25 804841039 EZ 250 Soxhlet extractor, 250 ml 804841038 EZ 250/HAHN Soxhlet extractor, 250 ml, with spigot 804841040 EX 250 HS Extraction thimbles for EZ 250 (HAHN) extractor, package of 25 804830450 PTFE 45 PTFE joint sleeves for EZ 100 and EZ 100/HAHN, EZ 250 and EZ 250/HAHN 804841011 RFK 30 Reflux condenser for 30 ml extractor 804851070 RFK 100 Reflux condenser for 100 ml extractors (EZ 100 or EZ 100/HAHN) 804841037 RFK 250 Reflux condenser for 250 ml extractors (EZ 250 or EZ 250/HAHN) 8

Determination of alcohol and volatile acids Units for the determination of alcohol content and the determination of volatile acids in wine and other alcoholic beverages. Complete with glassware, including volumetric flask and pycnometer. The behr S 2A, based on its speed of operation, is especially suited for applications involving a high sample workload. behr S 2 A Power: Cooling water consumption: Distillation time: Storage container: Display: 230 VAC, 50 Hz 1700 W approx. 5 l/min approx. 2... 3 min per sample any size, recommendation: behrotest set of canisters LCD Programs: 1 S 2 A Dimensions (W x H x D in mm) Weight: 410 x 675 x 410 32 kg 804852200 WE 1/H Single steam generator, 400 W, with additional sample heating. 804852103 GSABP Glassware accessory kit for the determination of alcohol by distillation into a pycnometer 804852102 GSAB Glassware accessory kit for the determination of alcohol by distillation into a volumetric flask. Pycnometer included. 804849010 S 2A Steam distillation apparatus for the alcohol determination, 1700 W, manual operation, Distillation into a volumetric flask. Pycnometer included. behrotest WE 1/H Power: Cooling water consumption: Distillation time: Storage container: Dimensions (W x H x D in mm) Weight: 230 VAC, 50 Hz 400 W approx. 5 l/min approx. 10 min per sample any size, recommendation: behrotest set of canisters 290 x 670 x 380 12,8 kg WE 1/H + GSAB 9

Determination of hydroxyproline RH 6 Digestion apparatus for the determination of hydroxyproline (connective tissue) content in meat and sausage. 804880024 RH 6 behrotest six sample digestion apparatus with energy control for determination of hydroxyproline content, complete with glassware Dimensions (W x H x D) Weight Rated voltage Power RH 6 approx. 76 x 74 x 32 cm 19,8 kg (w/o glassware) 230 VAC, 50/60 Hz 1960 W 804880035 SMH 6 behrotest six sample digestion apparatus for determination of hydroxyproline content, complete with heating block, cooling water manifold, temperature controller and glassware 804880036 SMH 12 behrotest twelve sample digestion apparatus for determination of hydroxyproline content, complete with heating block, cooling water manifold, temperature controller and glassware 146012 SMH 6 SMH 12 Dimensions (W x H x D) approx. 400 x 1000 x 650 mm approx. 400 x 1000 x 650 mm Weight of complete system approx. 32 kg approx. 34 kg Line voltage for heating block 230 VAC, 50/60 Hz 230 VAC, 50/60 Hz Power rating of heating block 800 W 1500 W SMH 12 10

Determination of the saponification number and the hydroxyl number BE 6 Digestion units with six or twelve sample positions for determination of, for example, the saponification number or the hydroxyl number. 804880025 behrotest six sample digestion unit, complete with heating block, temperature controller and glassware. 804880026 behrotest twelve sample digestion unit, complete with heating block, temperature controller and glassware. BE 6 BE 12 Dimensions (W x H x D) approx. 310 x 900 x 380 mm approx. 310 x 900 x 380 mm Weight of complete system approx. 28 kg approx. 30 kg Line voltage for heating block 230 VAC, 50/60 Hz 230 VAC, 50/60 Hz Power rating of heating block 800 W 1500 W Determination of total SO 2 Systems for the liberation and distillation of SO 2 in one or six samples, with magnetic stirrer(s). Choice of one or two absorption vessels per sample is available. Sample vessel: 500 ml round-bottom flask. Other sizes available on request. 804800501 KSO 2 Kompakt-apparatus for for the determination of total SO 2, with 2 absorption vessels and magnetic stirrer. 804880027 SO 2-6 Apparatus for determination of SO 2 in wine in up to 6 simultaneous sample places. 2 absorption vessels, magnetic stirrer. 804800502 AKO 300 Heating unit for destruction of the hydrogen peroxide prior to titration, complete with Erlenmeyer flask KSO 2 KSO 2-6 Approx. dimensions (H x W x D in cm) 71,5 x 23 x 33 100 x 70 x 43 cm Weight 7,5 kg 48 kg (w/o glassware) Line voltage 230 VAC, 50/60 Hz 230 VAC, 50/60 Hz Power rating 450 W 2000 W KSO 2 11

Determination of water content by azeotropic distillation Apparatus for the determination of water content by azeotropic distillation. Suitable for non-homogeneous, irregularly shaped foodstuffs, such as dried vegetables, dried fruit, etc. 804800500 KWA 500 behrotest Kompakt apparatus for water content determination. Complete with stand, heating element and tubing connections. 804850020 DBAS DET-basic configuration to be supplemented by application-specific accessory kits, consisting of a thermostatted aluminum heating block (20 300 C) with five 65 mm dia. cavities for sample vessels, condenser cooling water distributor and time-temperature controller 804850027 DWA 500 Accessory kit DWA 500, for use with the DBAS basic configuration, for the determination of water content KWA 500 behr equipment for foodstuffs analysis behr Labor-Technik - that means over 50 years of experience in the development, production and sales of laboratory equipment. Over this half-century a small family-owned business developed into an internationally active corporation. Today, customers all over the world prize the quality, reliability and cost-effectiveness of our equipment. Production of laboratory equipment for foodstuffs analysis is counted among our core activities. behr Labor-Technik has ranked for many years among the leading German producers. Routine quality control of basic foodstuffs is conducted world-wide employing standard analytical methods For many of these standard methods, behr Labor-Technik GmbH offers equipment and apparatuses, which offer the user safety and convenience of use in the daily laboratory routine. Sample Material Fruit, vegetables, grain, starches Meat, fish, fowl Dairy products Beverages Determination Water determination in dried vegetables, dried fruit, sauerkraut, etc.. Proteins (Kjeldahl nitrogen determination) Extraction Saponification number Sulfur dioxide (SO 2 ) Hydrolyse Extraction Proteins (Kjeldahl nitrogen determination) Saponification number Determination of sodium chloride content Hydroxyproline Extraction Proteins (Kjeldahl nitrogen determination) Alcohol in wine, etc. Sulfur in wine Volatile acids Cyclamate The design of behr equipment for foodstuffs analysis is constantly influenced by dialog with users. This results in product improvements, which, in individual instances, have led to Simplification of daily laboratory work, Shortening of the time required for the analysis, Simplifications, which have rendered complicated and costly accessories unnecessary. Solutions with a payoff for you 12behr Labor-Technik behr Labor-Technik GmbH Spangerstraße 8 D 40599 Düsseldorf Tel.: (+49) (0) 211 7 48 47 17 Fax: (+49) (0) 211 7 48 47 48 email: info@behr-labor.com Internet: www.behr-labor.com We reserve the right to make technical alterations and accept no responsibility for inadvertent errors.