A Collision-Free Machine There is really Only One Technology Only Okuma your Single Source for products built with breakthrough engineering for the highly competitive. With these key innovations that never forget the origin, when you reposition for success. Only Okuma a leader since 1898 OSP-P300/P200 Thermo-Friendly Concept 1
Thermo-Friendly Concept Compensating for thermal deformation to achieve extremely high machining accuracies Machining Navi A machining assistant to help you get the best cutting performance For extremely accurate accuracies even in non air-conditioned shops TAS-S: Thermo Active Stabilizer Spindle TAS-C: Thermo Active Stabilizer Construction Thermo-Friendly Concept Improved productivity Difficult materials, chatter solutions Longer tool life optimum cutting condition search helper see cutting conditions graphically Machining Navi Machining dimensional change over time: MB-46/56V actual data / Room temp change 8 (per TAS-C) For Milling Machining Navi M-g/M-i For turning Machining Navi L-g Machinin Navi OFF Machinin Navi ON Machinin Navi ON Machinin Navi OFF Collision-Free Machines Preventing machine component collisions in any operating mode With CAS*, the machine stops before a collision Work fast (no worries, mate) to get the job done Drastically reduce machining prep times Watch out! Crashing into the cover! Collision Avoidance System OSP-P300/P200 Control High performance and reliability Offering the max in productivity Viewer-friendly 15-in. liquid crystal display Responsive touch panel (nimble fingers dance) Okuma's own "real time OS" Collision Avoidance System Advanced One-Touch IGF One-Touch Spreadsheet The advanced architecture of the OSP-P300/P200 Windows -based Applications Machine Control Functions Machine stops before colliding Windows Real-Time OS High Performance NC Computer Ethernet USB Servo Link DeviceNet * Okuma's Collision Avoidance System 2
Product Lineup CNC Lathes Multitasking Machines Page5 Horizontal Lathes Page13 Horizontal Multitasking Machines SPACE TURN LB2000 EX SPACE TURN LB2500 EX SPACE TURN LB3000 EX SPACE TURN LB4000 EX LB352 LB452 GENOS L250H/L200H-M GENOS L400H/L300H-M MULTUS B2002 MULTUS B3002 MULTUS B4002 SIMUL TURN LU300 SIMUL TURN LU400 LU35 LU45 LOC500 LOC650 TWIN STAR LT2000 EX TWIN STAR LT300-M MULTUS B750 MACTURN250 MACTURN350 MACTURN550 Page9 Vertical Lathes Page15 Vertical Multitasking Machines V40R V60R V80R V100R 2SP-V40 2SP-V60 2SP-V80 SV250 VTM-1200YB VTM-80YB VTM-200YB MILLAC 33T MILLAC 33TU VTURN LVT300 VTURN LVT400 VTT-70 Page11 Other Lathes VTM-65 VTM-100 VTM-200 VTR-160A VTR-350A HJ-250 HL-20 HL-35(L) 2SP-150H 2SP-250H 2SP-10HG 2SP-25HG 2SP-35HG 3SP-25HG LH55-N LAW-2S LAW-V24 LAW-F2 3
Machining Centers Grinders IT / OSP Page17 Vertical Machining Centers Page25 Page26 GENOS M460-VE GENOS M560-V ACE CENTER MB-46VA/B ACE CENTER MB-56VA/B ACE CENTER MB-66VA/B MP-46V UNIVERSAL CENTER MU-400VA UNIVERSAL CENTER MU-500VA ACE CENTER MF-46VA/B Page21 MA-550VB MA-650VB Horizontal Machining Centers MILLAC 44V MILLAC 468V MILLAC 561V MILLAC 611V MILLAC 761V MILLAC 852V MILLAC 1052V2 GA-25/26T GP-25/26T OSP-P300/P200 ADMAC-Parts MacMan MA-500H2 MA-600H2 MB-4000H MB-5000H MILLAC 44H MILLAC 55H GA-34/44F2 GP-34/44F2 VAC Motors BL Motors PREX Motors MCS Drive Units Industrial Machine Controllers MA-400HA MB-8000H MB-10000H MILLAC 550H MILLAC 630H GA-36/47F2 GP-36/47F2 Page23 Double-Column Machining Centers MCV-A2 MCR-AF MCR-A GI-2N-SP MCR-A5C MCR-B3 MILLAC 800VH MILLAC 1000VH GI-10N GI-20N 4
CNC Lathes Horizontal Lathes 1-Saddle SPACE TURN, GENOS L, LB Series The evolution of general-purpose turning centers at world-class standards 1-Saddle CNC Lathe SPACE TURN LB3000 EX M W MY MW MYW CNC L Model Max turning dia Max work length Spindle speed Turret Motor (VAC) 5
SPACE TURN Series 1-Saddle CNC Lathe SPACE TURN LB2000 EX GENOS L Series M W MY MW 1-Saddle CNC Lathe SPACE TURN LB4000 EX M MY LB Series 1-Saddle CNC Lathe SPACE TURN LB2500 EX ATHES 1-Saddle CNC Lathe GENOS L250 GENOS L200-M 1-Saddle SPACE TURN 1-Saddle CNC Lathe GENOS L400 GENOS L300-M M MY M MY MW MYW M M Multitasking (M-tool) W Sub-spindle (W-axis) MY Multitasking + Y-axis MW Multitasking + Sub-spindle MYW Multitasking + Y-axis + Sub-spindle LB Series 1-Saddle CNC Lathe LB35 LB45 M GENOS L Series SPACE TURN LB2000 EX SPACE TURN LB3000 EX SPACE TURN LB4000 EX SPACE TURN LB2500 EX LB35 LB45 GENOS L250 GENOS L400 ømm 430 410 480 410 490 660 220 300 (øin.) (16.93) (16.14) (18.90) (16.14) (19.29) (25.98) (8.66) (11.81) mm 300 500, 1000 750, 1500, 2000 150 850, 1500, 2000 500, 1000, 2000, 3000 290, 500 500, 1100 (in.) (11.81) (19.69, 39.37) (29.53, 59.06, 78.74) (5.91) (33.46, 59.06, 78.74) (19.69, 39.37, 78.74, 118.11) (11.42, 19.69) (19.69, 43.31) min -1 6000 5000 4200 5000 3200 2800 4500 3000 V12 V12 V12 V12 V12 V12 V12 V12 kw 11/7.5 22/15 30/22 22/15 30 / 22 37/30 11/7.5 15/11 (hp) (15/10) (30/20) (40/30) (30/20) (40/30) (50/40) (15/10) (20/15) 6
CNC Lathes Horizontal Lathes 2-Saddle SIMUL TURN & LU Series, TWIN STAR Series Providing high productivity at new standards 2-Saddle CNC Lathes SIMUL TURN LU300 SIMUL TURN LU400 M M MY 2M CNC LATHES 2-Saddle SIMUL TURN Model SIMUL TURN LU300 Max turning dia ømm 370 (øin.) (14.57) Max work length mm 600 (in.) (23.62) Spindle speed min -1 5000 Turret (U/L) V12 /V8 Motor (VAC) kw 22 / 15 (hp) (30/20) U/L: Upper/Lower 7
LU Series Oil Country Lathes 2-Saddle CNC Lathes LU35 LU45 M M TWIN STAR Series Turning Centers with Twin Spindles 1-/2-Saddle CNC Lathes LOC500 LOC650 Twin Spindle Turning Center TWIN STAR LT2000 EX MY 3T Twin Spindle Turning Center TWIN STAR LT300-M MY M Multitasking (M-tool) MY Multitasking + Y-axis 2M Multitasking (upper/lower turrets) 3T 3 rd turret LU Series Oil Country Lathes TWIN STAR Series SIMUL TURN LU400 LU35 LU45 LOC500 LOC650 TWIN STAR LT2000 EX TWIN STAR LT300-M 420 550 660 660 500 210 350 (16.54) (21.65) (25.98) (25.98) (19.69) (8.27) (13.78) 650 850,1500,2000 1000,2000,3000 2000 1750 130 (25.59) (33.46, 59.06, 78.74) (39.37, 78.74, 118.11) (78.74) (68.90) (5.12) 3800 3200 2800 2000-1500-1000* [B15]: 500, [B22]: 350 6000 5000 V12 / V10 V12 / V10 V12 / V10 V12 / V10 V12/V8 U/L: M-V16 U/L: M-V12 22/ 15 30/ 22 37/ 30 37/30-45/37-55/45* 37/45 L/R: 11.5/7.5 L/R: 22/15 (30/20) (40/30) (50 /40) (50/40)-(61/50)-(75/61) (50/60) (15/10) (30/20) M: Multitasking L/R: Left /Right * [B-5.5-07-11] 8
CNC Lathes Vertical Lathes Vertical CNC Lathes, Turning Centers, Double-column Turning Centers Differentiate with these unique application specialists Vertical Twin-Spindle CNC Lathes 2SP-V40 2SP-V60 2SP-V80 M M M CNC LATHES Vertical CNC Lathes Model V40R V60R Max turning dia ømm 400 610 (øin.) (15.75) (24.02) Max work length mm 450 660 (in.) (17.72) (25.98) Spindle speed min -1 2500 2000 Turret V12 V12 Motor (VAC) kw 22/18.5 30/22 (hp) (30/25) (40/30) V80R 800 (31.50) 840 (33.07) 1250 V12 30/22 (40/30) V100R 1000 (39.37) 890 (35.04) 4 to 416 (L)/13 to 1250 (H) V12 servo 30/22 (40/30) L: Low speed, H: High speed SV250 250 (9.84) 350 (13.78) 6000 V12 servo 15/11 (20/15) 9
Vertical CNC Lathes Vertical CNC Lathes V40R V60R M M Vertical CNC Lathes V80R M V100R M Vertical CNC Lathe SV250 Vertical CNC Lathes Turning Centers Vertical NC Lathes VTURN LVT300 VTURN LVT400 [For line applications] Twin Turret Vertical Turning Center VTT-70 M Multitasking (M-tool) [Line Apprications] Vertical Twin-Spindle CNC Lathes VTT-70 VTURN LVT300 VTURN LVT400 2SP-V40 2SP-V60 2SP-V80 700 280 450 400 610 800 (27.56) (11.02) (17.72) (15.75) (24.02) (31.50) 660 200 300 450 660 840 (25.98) (7.87) (11.81) (17.72) (25.98) (33.07) 1250 4000 3300 2500 2000 1250 V12+V12 V12 V12 V12+V12 V12+V12 V12+V12 30/22 22/15 22/15 22/18.5 x 2 30/22 x 2 30/22 x 2 (40/30) (30/20) (30/20) (30/25) (40/30) (40/30) *Max swing 10
CNC Lathes Other Lathes 1-Saddle CNC Lathes, Compact Series, Parallel Twin/Triple-Spindle CNC Lathes, a Large Flat Bed, Aluminum Wheel Applications Getting optimum production with the right tools 1-Saddle CNC Lathes HL-20 HL-35(L) CNC LATHES Model Max turning dia Max work length ømm (øin.) mm (in.) Spindle speed min -1 Turret Motor (VAC) kw (hp) Compact Series HJ-250 280 (11.02) 330 (12.99) 3000 V8 7.5/5.5 (10/7) HL Series HL-20 350 (13.78) 460 (18.11) 3200 V8 15/11 (20/15) HL-35 (L) 350 (13.78) 610 [1020] (24.02 [40.16]) 3500 V12 18.5/15 (25/20) Large Flat Bed CNC Lathe LH55-N 685 (26.97) 2000, 3000, 4000, 6000 (78.74, 118.11, 157.48, 236.22) 1200 V8, V6, H4 45/37 (60/49) 11 [ ] for HL-35L
Compact Series Parallel 2-Spindle CNC Lathes Large Flat Bed CNC Lathe 1-Saddle CNC Lathes HJ-250 Aluminum Wheel Applications Horizontal Parallel Twin Spindle CNC Lathes 2SP-150H 2SP-250H Large Flat Bed CNC Lathe LH55-N CNC Lathe for Aluminum Wheel Applications LAW-2S CNC Lathe for Aluminum Wheel Applications LAW-V24 CNC Lathe for Aluminum Wheel Applications LAW-F Parallel Twin/Triple-Spindle CNC Lathes 2SP-150H 2SP-250H 150 [220] 250 [350] (5.91 [8.66]) (9.84 [13.78]) 80 [150] 60 [200] (3.15 [5.91]) (2.36 [7.87]) 4500 3200 V12 V12 11/7.5 18.5/15 (15/10) (25/20) [ ] for machine capacity 2SP-10HG 100 (3.94) 100 (3.94) 5000 V8+V8 7.5/5.5 x 2 (10/7) 2SP-25HG 200 [350] (7.87 [13.78]) 200 (7.87) 3200 V10+V10 15/11 x 2 (20/15) 2SP-35HG 280 [380] (11.02 [14.96]) 230 (9.06) 2000 V12+V12 18.5/15 x 2 (25/20) 3SP-25HG 200 [350] (7.87 [13.78]) 200 (7.87) 3200 V10+V10+V10 15/11 x 3 (20/15) Aluminum Wheel Applications LAW-2S LAW-V24 20" x 11J 24.5" x 12J 3000 U/L:V6/V4 55/45 (75/60) U/L: Upper / Lower 3000 L/R:V6/V6 55/45 (75/60) L/R: Left /Right LAW-F 18" x 10J 3000 V12 37/30 (50/40) 12
Multitasking Machines Horizontal Multitasking Machines MULTUS, MACTURN Series The ultimate in complex multitasking made easy Intelligent Multitasking Machine MULTUS B3002 W 13
MULTUS Series Intelligent Multitasking Machine Intelligent Multitasking Machine Intelligent Multitasking Machine MULTUS B2002 W MULTUS B4002 W MULTUS B750 W MACTURN Series Multitasking Machines MACTURN250 W MACTURN350 W MULTITASKING MACHINES Multitasking Machine MACTURN550 W MULTUS Series MACTURN Series Model MULTUS B200 MULTUS B300 MULTUS B400 MULTUS B750 MACTURN250 MACTURN350 MACTURN550 Max machining dia ømm 600 630 710 1050 550 550 720 (øin.) (23.62) (24.80) (27.95) (41.34) (21.65) (21.65) (28.35) Max work length mm 550 900 1550 3000, 4000, 6000 1025 1625 2000, 3000 (in.) (21.65) (35.43) (61.02) (118.11, 157.48, 236.22) (40.35) (63.98) (78.74, 118.11) Spindle speed min -1 6000 5000 3800 2000 5000 5000 3500 Turret (U/L) H1 ATC H1 ATC H1 ATC H1 ATC H1 ATC/V12 H1 ATC/V12 H1 ATC/V12 Motor (VAC) kw PREX 11/7.5 15 / 11 22/ 15 37/30 22 / 15 22 / 15 30 / 25 (hp) (15/10) (20/15) (30/20) (50/40) (30/20) (30/20) (40/34) U/L: Upper/Lower W 2nd-op spindle (W-axis) Opposing spindle (W-axis) 14
Multitasking Machines Vertical Multitasking Machines Vertical Multitasking Machines Industry standouts for intelligent and resourceful multitasking 5-Axis Vertical Multitasking Machine VTM-1200YB MULTITASKING MACHINES Model Table Travels (X-Y-Z) mm (in.) mm (in.) Spindle speed min -1 Tool storage tools Motor (VAC) kw (hp) 5-Axis Vertical Multitasking Machines VTM-1200YB VTM-80YB VTM-200YB ø1,200 (47.24) 1,080 (42.52) 500 BT50 VAC30/22 (40/30) ø800 (31.49) 1,135 (44.69) 800 BT50 VAC30/22 (40/30) 2,000 (78.74) 1,400 (55.12) 400 BT50 VAC30/22 (40/30) 15
Vertical Multitasking Machines Vertical Multitasking Machines VTM-65 VTM-100 VTM-200 Vertical Multitasking Machines Double-Columu Turning Center VTR-160A Double-Columu Turning Center VTR-350A 5-Axis Vertical Multitasking Machines VTM-80YB VTM-200YB Compact Multitasking Machines MILLAC 33T MILLAC 33TU Vertical Multitasking Machines VTM-65 VTM-100 VTM-200 ø650 (25.59) 635 (25) 1,250 BT50 VAC30/22 (40/30) ø1,000 (39.37) 840 (33.07) 1,250 BT50 VAC30/22 (40/30) ø2,000 (78.74) 1,200 (47.24) 250 BT50 VAC30/22 (40/30) Compact Multitasking Machines Double-Columu Turning Center MILLAC 33T MILLAC 33TU VTR-160A VTR-350A 250 (9.84) 220 (8.66) 6000 (L),12,000 (M) BT40 15/11 (20/15) 200 (7.87) 100 (3.94) 1000 (L),12,000 (M) BT40 6.7/3.7 (L),15/11 (M) (9/5) (20/15) ø1,600* (62.99) 1,250 (49.21) 400 BT50 VAC45/37 (60/50) ø3,500* (137.79) 1,600 (62.99) 160 BT50 VAC55/45 (73/60) 16
Machining Centers Vertical Machining Centers ACE CENTER MB-V, GENOS M, MP-V, MA-V Series Genuine high accuracy from a balanced fusion of hard and soft Vertical Machining Center ACE CENTER MB-46VA/ B VERTI CAL MACHINING CENTERS Model Table Travels (X-Y-Z) mm (in.) mm (in.) Spindle speed min -1 Tool storage tools Motor (VAC) kw (hp) ACE CENTER Series ACE CENTER MB-46VA/B 760 x 460 (29.92 x 18.11) 560 x 460 x 460 (22.05 x 18.11 x 18.11) 8000/6000 20 11/7.5 (15/10) ACE CENTER MB-56VA/B 1300 x 560 (51.18 x 22.05) 1050 x 560 x 460 (41.34 x 22.05 x 18.11) 8000/6000 20 11/7.5 (15/10) ACE CENTER MB-66VA/B 1530 x 660 (60.24 x 25.98) 1500 x 660 x 660 (59.06 x 25.98 x 25.98) 8000/6000 20 11/7.5 (15/10) 17
GENOS M Series ACE CENTER MB-V Series Vertical Machinning Center For High-Precision Parts and Die/Mold Applications Vertical Machining Center GENOS M460-VE GENOS M560-V Vertical Machining Center ACE CENTER MB-56VA /B ACE CENTER MB-66VA /B Vertical Machinning Center For High-Precision Parts and Die/Mold Applications MP-46V UNIVERSAL CENTER Series ACE CENTER Series MA-V Series 5-Axis Vertical Machining Center UNIVERSAL CENTER MU-400VA UNIVERSAL CENTER MU-500VA Vertical Machining Center with APC ACE CENTER MF-46VA Vertical Machining Centers MA-550VB MA-650VB L Turning specs ACE CENTER MF-46VA 760 x 460 (pallet) (29.92 x 18.11) 762 x 460 x 460 (30.00 x 18.11 x 18.11) 8000 20 11/7.5 (15/10) GENOS M Series GENOS M460-VE 1000 x 460 (39.37 x 18.11) 762 x 460 x 460 (30.00 x 18.11 x 18.11) 8000 20 11/7.5 (15/10) GENOS M560-V 1300 x 560 (51.18 x 22.05) 1050 x 560 x 460 (41.34 x 22.05 x 18.11) 8000 20 11/7.5 (15/10) MP-V MP-46V 760 x 460 (29.92 x 8.11) 660 x 460 x 360 (25.98 x 18.11 x 14.17) 20000 20 15/11 (20/15) 5-Axis Vertical Machining Center UNIVERSAL CENTER MU-400VA ø400 (15.75) 762 x 460 x 460 (30 x 18.11 x 18.11) 8,000 20 VAC11/7.5 (15/10) UNIVERSAL CENTER MU-500VA ø500 (19.69) 1,250 x 660 x 540 (49.21 x 25.98 x 21.56) 8,000 20 VAC11/ 7.5 (15/10) MA-V Series MA-550VB 1300 x 560 (51.18 x 22.05) 1300 x 560 x 560 (51.18 x 22.05 x 22.05) 6000 32 22/15/11 (30/20/15) MA-650VB 1530 x 660 (60.24 x 25.98) 1530 x 660 x 610 (60.24 x 25.98 x 24.02) 6000 32 22/15/11 (30/20/15) 18
Machining Centers Vertical Machining Centers MILLAC-V Series Technologies of the future built on miraculous track records Vertical Machining Center MILLAC 44V 19
MILLAC-V Series Vertical Machining Center Vertical Machining Center Vertical Machining Center MILLAC 468V MILLAC 561V MILLAC 611V MILLAC-V Series Vertical Machining Center Vertical Machining Center Vertical Machining Center MILLAC 761V MILLAC 852V MILLAC 1052V2 VERTICAL MACHINING CENTERS Model Table Travels (X-Y-Z) mm (in.) mm (in.) Spindle speed min -1 Tool storage tools Motor (VAC) kw (hp) MILLAC-V Series MILLAC 44V MILLAC 468V MILLAC 561V MILLAC 611V MILLAC 761V MILLAC 852V MILLAC 1052V2 630 x 400 1050 x 460 1350 x 560 1600 x 655 1800 x 720 2200 x 850 2200 x 1050 (24.80 x 15.75) (41.34 x 18.11) (53.15 x 22.05) (62.99 x 25.79) (70.87 x 28.35) (86.61 x 33.46) (86.61 x 41.34) 560 x 410 x 410 820 x 460 x 450 1050 x 560 x 520 1300 x 610 x 560 1540 x 760 x 660 2050 x 850 x 750 2050 x 1060 x 800 (22.05 x 16.14 x 16.14) (32.28 x 18.11 x 17.72) (41.34 x 22.05 x 20.47) (51.18 x 24.02 x 22.05) (60.63 x 29.92 x 25.98) (80.71 x 33.46 x 29.53) (80.71 x 41.73 x 31.50) 12000 /20000 12000 [6000] 12000 [6000] 4000 4000 4000 4000 16 20 20 20 36 36 36 15/11 22/18.5 [18.5/11] 22/18.5 [15/11] 15/11 18.5/15 18.5/15 22/18.5 (20/15) (30/25 [25/15]) (30/25 [25/15]) (20/15) (25/20) (25/20) (30/25) [ ] for BT50 [ ] for BT50 20
Machining Centers Horizontal Machining Centers MA-H, MA-H2, MILLAC-H Series, and MB-H Authoritative HMCs that don t compromise on high quality Horizontal Machining Centers MA-500H2 MA-600H2 HORIZONTAL MAC Model Table Travels (X-Y-Z) Spindle speed Tool storage Motor (VAC) mm (in.) mm (in.) min -1 tools kw (hp) MA-H MA-400HA 400 x 400 (15.75 x 15.75) 560 x 610 x 625 (22.05 x 24.02 x 24.61) 8000 30 15/11 (20/15) 21
MA-H Series MB-H Series Horizontal Machining Center SPACE CENTER MA-400HA MILLAC-H Series High-Speed Horizontal Machining Centers MB-4000H MB-5000H Horizontal Machining Centers MB-8000H MB-10000H MA-H2 Series MA-500H 500 x 500 (19.69 x 19.69) 700 x 900 x 780 (27.56 x 35.43 x 30.71) 6000 40 30/22 (40/30) High-Speed Horizontal Machining Center MILLAC 44H HINING CENTERS MA-600H 630 x 630 (24.80 x 24.80) 1000 x 900 x 1000 (39.37 x 35.43 x 39.37) 6000 40 30/22 (40/30) MB-H Series MB-4000H 400 x 400 (15.75 x 15.75) 560 x 560 x 625 (22.05 x 22.05 x 24.61) 15000 48 22/18.5 (30/25) MB-5000H 500 x 500 (19.69 x 19.69) 760 x 760 x 760 (29.92 x 29.92 x 29.92) 15000 48 26/18.5 (35/25) Horizontal Machining Center MILLAC 55H MB-8000H 800 x 800 (31.50 x 31.50) 1300 x 1100 x 1250 (51.18 x 43.31 x 49.21) 6000 48 30/22 (40/30) MB-10000H 1000 x 1000 (39.37 x 39.37) 1400 x 1250 x 1250 (55.12 x 49.21 x 49.21) 6000 40 30/22 (40/30) MILLAC-H Series MILLAC 44H MILLAC 55H 320 x 320 (12.60 x 12.60) 410 x 395 x 470 (16.14 x 15.55 x 18.50) 12000 24 15/11 (20/15) 400 x 400 (15.75 x 15.75) 520 x 450 x 520 (20.47 x 17.72 x 20.47) 12000 24 15/11 (20/15) Horizontal Machining Centers MILLAC 550H MILLAC 630H MILLAC 550H 550 x 550 (21.65 x 21.65) 800 x 800 x 700 (31.50 x 31.50 x 27.56) 10000 40 30/25 (40/34) MILLAC 630H 630 x 630 (24.80 x 24.80) 1020 x 820 x 820 (40.16 x 32.28 x 32.28) 10000 40 30/25 (40/30) 22
Machining Centers Double-Column Machining Centers Vertical Spindle Series / 5-Sided Applications / 5-Axis Vertical Machining Centers Series The framework that assures superb reliability Double-Column Machining Center MCR-B3 (5-Sided Applications) DOUBLE-COLUMN Double-Column Machining Centers Model MCV-A Effective width* 1 mm 1650, 2050 (in.) (64.96,80.71) Table* 2 mm 1200 x 2100 to 1500 x 5100 (in.) (47.24 x 82.68 to 59.06 x 200.79) Travels (X-Y-Z) mm 2000 x 1600 x 450 to 5000 x 2000 x 450 (in.) (78.74 x 62.99 x 17.72 to 196.85 x 78.74 x 17.72) Spindle speed min -1 4000 Motor (VAC) kw 22 / 18.5 (hp) (30/25) 23 *1. Between columns *2. Working surface
Vertical Spindle Series 5-Axis Vertical Machining Centers Series Double-Column Machining Center MCV-A2 5-Sided Applications Double-Column Machining Center MCR-AF 5-Axis Vertical Machining Centers Series MILLAC 800VH MILLAC 1000VH Double-Column Machining Center MCR-A5C (5-Sided Applications) Double-Column Machining Center MCR-A (5-Sided Applications) MACHIN ING CENTERS (5-Sided Applications) MCR-AF 2600 (102.36) 2000 x 1500 to 2000 x 2000 (78.74 x 59.06 to 78.74 x 78.74) 2600 x 1500 x 800 to 2600 x 2000 x 800 (102.36 x 59.06 x 31.50 to 102.36 x 78.74 x 31.50) 8000 26/22 (35/30) 5-Axis Vertical Machining Centers Table* 2 mm (in.) Travels (X-Y-Z) mm (in.) Spindle speed min -1 (in.) Tool storage Motor (VAC) tools kw (hp) MILLAC 800VH 800 x 800 (31.49 x 31.49) 1,020 x 1,020 x 1,020 (40.16 x 40.16 x 40.16) 10,000 (393.7) 80 VAC22/18.5 (0.87 x 0.73) MILLAC 1000VH 1,000 x 1,000 (39.37 x 39.37) 1,650 x 1,300 x 1,000 (64.96 x 51.18 x 39.37) 6,000 (236.22) 40 VAC22/18.5 (0.87 x 0.73) 5-Sided Applications MCR-A 2050 2550 3050 (80.71,100.39,120.08) 1500 x 3000 to 2500 x 7800 (59.06 x 118.11 to 98.43 x 307.09) 3200 x 2500 x 650 to 8000 x 3500 x 650 (125.98 x 98.43 x 25.59 to 314.96 x 137.80 x 25.59) 4000 26/22 (35/30) MCR-A5C 2050 2550 3050 3550 (80.71,100.39,120.07,139.76) 1500 x 3000 to 3000 x 9800 (59.06 x 118.11 to 118.11 x 385.82) 3200 x 2500 x 650 to 10000 x 4000 x 800 (125.98 x 98.43 x 25.59 to 393.7 x 157.48 x 31.5) 4000 22 / 18.5 (30/25) MCR-B3 1700 to 3550 (66.93 to 139.76) 1200 x 1800 to 3000 x 11800 (47.24 x 70.87 to 118.11 x 464.57) 2000 x 2300 x 800 to 12,000 x 4200 x 800 (78.74 x 90.55 x 31.5 to 472.44 x 165.35 x 31.5) 4000 30/22 (40/30) 24
Grinders Cylindrical Grinders and Internal Grinders NC Cylindrical Grinders NC Cylindrical Grinders NC Cylindrical Grinders NC Cylindrical Grinders GA-25/26T GP-25/26T NC Internal Grinders GA-34/44F GP-34/44F GA-36/47F GP-36/47F NC Internal Grinder NC Internal Grinder NC Internal Grinder GI-2N-SP GI-10N GI-20N GRINDERS NC Cylindrical Grinders Model GA/GP-25/26T GA/GP-34/44F II GA/GP-36/47F II Swing over table ømm 330 330 / 430 330 / 430 (øin.) (12.99) (12.99/16.93) (12.99/16.93) DBC* mm 350,650 350 to 1500 350 to 1500 (in.) (13.78,25.59) (13.78 to 59.06) (13.78 to 59.06) Wheel size mm ø510 x 75 /ø610 x 75 ø455 x 75 ø610 x 135 / ø760 x 160 (in.) (20.08 x 2.95 / 24.02 x 2.95) (17.91 x 2.95) (24.02 x 5.31 / 29.92 x 6.30) Wheel peripheral speed m/sec 45 45 45 Wheel motor kw 7.5 7.5 15 (hp) (10) (10) (20) NC Internal Grinders Model GI-2N-SP GI-10N GI-20N Swing-in chuck guard ømm 310 400 (øin.) (12.2) (15.75) Bore grinding ømm 2 to 20 3 to 150 5 to 300 (øin.) (0.08 to 0.79) (0.12 to 5.91) (0.2 to 11.81) Max grinding depth mm 65 150 200 (in.) (2.56) (5.91) (7.87) Wheel motor kw-p 5.5-2 5.5-2 (hp) (7-2) (7-2) 25 * Distance between centers
IT / OSP The closest control system to perfect machining Okuma Control CAD/CAM system for parts machining Production control system (Machining Management) ADMAC-Parts ADMAC-Parts MacMan MacMan Electronic sending/receiving of machining orders Internet CAD data Creates part programs directly from CAD (DXF) data for production on NC machines. Direct machining Greater production efficiency: Manages all production-related information, from order receipt to shipping, and reflects this information in process and operational planning. Speedy production OSP-P300/P200 A machine control (OSP) and Windows collaboration. Breakthrough engineering has produced a thin-panel computer with truly incredible performance for highly competitive manufacturing requirements. ADMAC OSP Auto machining results compiler Production plan and progress report Order control Drive Unit & Motors Motion Controller MCS Drive Units Controls servos through a highspeed (10 Mbps) network BL Motors Handles wattages from 0.5 to 7 kw VAC Motors Handles wattages from 2.2 to 55 kw PREX Motors Next-generation design without permanent magnet and no winding Industrial Machine Controllers Highly flexible controller that meets the wide-ranging needs of generalproduction machines. 26
When using Okuma products, always read the safety precautions mentioned in the instruction manual and attached to the product. This product is subject to the Japanese government Foreign Exchange and Foreign Trade Control Act with regard to security controlled items; whereby Okuma Corporation should be notified prior to its shipment to another country. OKUMA Corporation, OGUCHI-CHO, NIWA-GUN, AICHI 480-0193, JAPAN TEL (0587) 95-7825 FAX (0587) 95-6074 okuma.co.jp/english The specifications, illustrations, and descriptions in this brochure vary in different markets and are subject to change without notice. Consult your local Okuma representative for specific end-user requirements. Pub No. Machine Tools-(54a)-300 (Aug 2012) Printed in Japan