2012 INTERNATIONAL MASTER S IN THEORETICAL & PRACTICAL APPLICATION OF FINITE ELEMENT METHOD AND CAE SIMULATION on-line Master s Expert Module Mechanical Branch Construction Branch Specialized Modules Structure dynamic analysis Nonlinear structure analysis Heat transfer analysis Steel structures advanced analysis Fluid mechanics analysis Concrete structures advanced analysis Geotechnical analysis Low frequency electromagnetic analysis Since 1993 Master s Final Project. Best project award. Mesh Thermal analysis Concrete-steel composite structure Concrete Structure Structural Analysis Geotechnic Expert, Specialist and Master levels, S.A.
INTRODUCTION ETSII/UNED and Ingeciber began eir partnership in 1993 by unifying eir wi experience using numerical analysis meods in different research areas and professional engineering applications. The objective was, and still is, to prepare specialist in e use of Finite Element Meod (FEM) and CAE Simulation for practical professional application. Specialist in FEM (university professors and Ingeciber expert engineers) have signed and elaborated a study programme at finally has became e International Master in Theoretical & Practical Application. More an 2,500 postgraduates have participated in is Master s since en, which clearly monstrates at e course has obtained wi prestige and recognition over e years. Committed to excellence in teaching, research and innovation, e Partnership is actively engaged wi industry, governments and universities across e world in tackling some of e major challenges of today and tomorrow. We hope at you will consir unrtaking our World Class Master s Degree course and achieve your full potential. COURSE CONTENT The multi-dimensional curriculum is aimed not just at acquiring knowledge but at veloping critical inking and analytical ability and facilitating research at every stage of e course. 1. Expert Module: provis key unrstanding of e FEM, in orr to have a solid foundation to furer velop at more advanced levels. 2. Specialized Modules: provi a huge range of possibilities for in-p analysis of different areas rough eoretical and practical knowledge: Dynamic, Non-Linear, Heat Transfer, Fluid Mechanics, Steel Structures and Advanced Concrete analysis. 3. The course offers ree different gree options (Expert, Specialist and Master s) to pursue your training rough core and elective subjects.
4. A wi range of texts and practical exercises (English language) provi DEGREES The following awards will be granted on successful completion of e different Master s levels: complete studying material. 5. Practical learning is acomplished by using Patran/MSC Nastran, CivilFEM wi Marc and CFD++ software (unr educational license). 6. The course uses e following tools: On-line virtual classrooms, v i d e o c o n f e r e n c e s, t e c h n i c a l f o r u m s, e - m a i l, o n - l i n e a d i t i o n a l support material, etc. 7. Local collaborators will be available to give tutorials in different countries. Expert in eoretical and practical application of finite element meod (The stunts must take Expert Module). Specialist in eoretical and practical application of finite element meod and simulation (The stunts must take e Expert Module and one Specialized Module). Master s in eory and practical application of finite element meod and simulation (The stunts must take e Expert Module, one of e Specialized Modules Group and e Final Project). Diplomas are issued by UNED university of Spain. To access is postgraduate course at least a EHEA bachelor's gree (grado EEES) is required. ACADEMIC ROUTE Participants who choose Mechanical Branch in e Expert Module, will use PATRAN / MSC NASTRAN software in Dynamic, Non-Linear and Heat Transfer specialized modules and CFD++ software in Fluid Mechanics specialized module. Participants who choose Construction Branch in e Expert module, will use CivilFEM wi Marc in Dynamic, Non-Linear, Steel Structure and Concrete Advanced specialized modules.
TEACHING STAFF Director Mr. Juan José Benito Muñoz. Construction Engineering and Manufacturing Department, School of Industrial Engineers, UNED University. Coordinators Mr. Miguel Ángel Moreno Fz. Yepes. Manager, Ingeciber, S.A. Mr. Ambrosio Baños Abascal. Engineering Department, Ingeciber, S.A. Professors Mr. Enrique Alarcón Álvarez. Civil Engineer PhD, UPM. Mr. Ramón Álvarez Cabal. Industrial Engineer PhD, UPM. Mr. Juan José Benito Muñoz. Industrial Engineer PhD, UNED. Mr. Enrique López l Hierro Fernánz. Industrial Enginner PhD, UNED. Mr. Francisco Blázquez García, Industrial Enginner PhD. UPM Mr. Pablo la Fuente Martín. Civil Enginner PhD, UPM. Mr. Luis Gavete Corvinos. Mine Engineer PhD, UPM. Mr. Julio Hernánz Rodríguez. Industrial Engineer PhD, UNED. Mr. Alberto Fraile Lerma. Industrial Engineer PhD, UPM. Mr. Francisco Montans Leal. Industrial Engineer PhD, UPM. Mr. Ignacio l Rey Llorente. Industrial Engineer PhD, UPM Mr. Mariano Rodríguez-Avial Llarnt. Industrial Engineer PhD, UNED. Mr. Eduardo Salete Díaz. Civil Engineer PhD, UPM. Mr. José Ángel Sánchez Fernánz. Civil Engineer PhD, UPM. Mr. José Mª Sancho Aznal. Architect PhD, UPM. Lecturers Mr. Ambrosio Baños Abascal. MsC Science, Ingeciber, S.A. Mrs. Sheila Coca Sola. Civil Engineer. Ingeciber, S.A. Mr. José Luis Cuadros Fernánz. Mechanical Engineer, Ingeciber, S.A. Mr. Rubén Establés Antón. Civil Engineer, Ingeciber, S.A. Dr. Juan Carlos Lancha. Civil Engineer PhD, O.H.L. Mr. Rubén Mariño Díaz. Mining Engineer. Ingeciber, S.A. Mr. Román Martín Martín. Civil Engineer, Ingeciber, S.A. Dr. Miguel Ángel Moreno Fz. Yepes. Civil Engineer PhD, Ingeciber, S.A. Mr. Sergio Rico Herrero. Industrial Engineer, Ingeciber, S.A. Dr. Eduardo Salete Casino. Civil Engineer PhD, Ingeciber, S.A. Mr. Ronald Siat Caparros. Civil Engineer, Ingeciber, S.A. COURSE SECRETARY Ingeciber, S.A. Mrs. Constanza Pizarro. e-mail: c.pizarro@ingeciber.com Mrs. Gema Ramos. e-mail: g.ramos@ingeciber.com Telephone: +34 91 386 22 22. Fax:+34 91 386 45 80 Avda. Monforte Lemos, 189. 28035 Madrid. Spain
COURSE STRUCTURE EXPERT MODULE (30 cts) FOUNDATION Teoría FEM General general l Theory MEF 6 cts. AF.1 Introducción FEM a la Introduction to Programación Programming 3 cts. AF.2 Cálculo Numerical numérico Calculation AF.3 Leyes Material Comportamiento Constitutive materiales Laws AF.4 Mechanical branch(*) Construction branch (*) APPLICATION Curso Introduction Introductorio l to programa e use of practical aplicación y software práctica 5 cts. Té Computer-Aid ANSYS engineering diseño techniques ornador Curso Introduction Introductorio to e use of practical aplicación software y práctica 5 cts. Técnicas Computer-Aid molado. Utilización engineering l techniques mallado ático (*)To be chosen by e stunt AP.1 AP.2 AP.1 AP.2 Practice Mechanical Prácticas practical Aplicación software Ejemplos Mecánicos examples AP.3 Prácticas Civil Aplicació practical Ejemplos software examples Civiles AP.3 SPECIALIZED MODULES (10 cts by module) Module A Module B Module C Module E Module F Module H Module I Module J FOUNDATION Teoría FEM l eory MEF Aplicada applied toal structure Análisis Dinámico dynamic Estructuras analysis A.1 Teoría FEM l eory MEF applied to e Cálculo Non-linear no analysis Lineal of Estructuras structures B.1 Teoría FEM l eory MEF Aplicada applied to a la Transferencia heat transfer Calor C.1 Advanced Cálculo avanzado steel structures Estructuras Metálicas Analysis E.1 Teoría l MEF Aplicada FEM eory a la Mecánica applied to fluid Fluidos mechanics F.1 Advanced Cálculo avanzado concrete structures Estructuras analysisón H.1 Teoría l MEF Aplicada FEM eory a la Mecánica applied to Geotechnics Fluidos I.1 FEM Cálculo eory avanzado applied to low Estructuras frequency electromagnetic Hormigón analysis J.1 APPLICATION Introduction álisis to Dinámico. Dynamic Aplicación analysiscon el programa wi practical prácticas software A.2 Curso Introduction Análisis to: Non-linear Aplicación analysiscon el programa wi practical prácticas software B.2 Transferencia Heat transfer analysis Calor Aplicación wi con el practical programa software prácticas C.2 Introduction to: Steel Estructuras structure analysis Metálicas wi Aplicación practical con prácticas E.2 Fluid Mecánica mechanics analysis Fluidos wi Aplicación practicalcon prácticas F.2 Estructuras Concrete structures Hormigón Aplicación analysis wi con el practical programa software prácticas H.2 Geotechnical Mecánica analysis Fluidos wi Aplicación practicalcon prácticas I.2 Estructuras EMAG analysis Hormigón wi Aplicación practical con prácticas J.2 Practice Prácticas Dynamic Analysis Análisis Dinámico Practice A.3 Prácticas Non-linear analysis Análisis No Practice Lineales B.3 Prácticas Heat Transferencia transfer Practice Calor C.3 Prácticas Metallic structures Estructuras Metálicas Practice E.3 Prácticas Fluid Mechanics Mecánica Practice Fluidos F.3 Prácticas Concrete Estructuras structure Practice Hormigón H.3 Prácticas Geotechnical Mecánica Practice Fluidos I.3 Prácticas Estructuras EMAG Practice Hormigón J.3 SPECIALIZED MODULES GROUPS - Structural: Construction Branch and A, B and E Modules - Construction: Construction Branch and A, B, E, H and I Modules* - Mechanical: Mechanical Branch and A, B, C, F and J Modules* * Choose ree of e five modules NOTE: Modules I & J will not be available for stunts at have studied e Master wi Patran/MSC Nastran or CivilFEM wi Marc respectively. FINAL PROJECT MODULE (10 cts)
SCHEDULE Registration adline 28 Feb 2012 Opening Session 24 Mar 2012 Expert Module 26 Mar 2012 to 29 Oct 2012 Speciality Modules 02 Jul 2012 to 03 Dec 2012 Final Project Master Module 26 Mar 2012 to 29 Oct 2012 METHODOLOGY The meodology applied is at of UNED University: Texts and practice software will be provid; Self-assessment and course assessment exercises will be ma available; On-line Exams; The Master s provis on-line virtual classrooms in e UNED on-line campus. FEES Fees inclu: tuition, materials, shipping, software, examination and certification fees. Registration fees: Expert Module... 1,770.00 Specialized Modules... 590.00 / module Final Project Module... 590.00 ENROLLMENT Make your registration on-line: www.fundacion.uned.es C/ Francisco Rojas, 2. 2º dcha. 28010 Madrid (España) Tlfnos.: (+34) 91.386.72.75/15.92 Fax: (+34) 91.386.72.79 e-mail: aroyo@fundacion.uned.es More information on www.uned.es/mastermef