Infor Warehouse Mobility for Infor ERP LN Installation Guide
Important Notices The material contained in this publication (including any supplementary information) constitutes and contains confidential and proprietary information of Infor. By gaining access to the attached, you acknowledge and agree that the material (including any modification, translation or adaptation of the material) and all copyright, trade secrets and all other right, title and interest therein, are the sole property of Infor and that you shall not gain right, title or interest in the material (including any modification, translation or adaptation of the material) by virtue of your review thereof other than the non-exclusive right to use the material solely in connection with and the furtherance of your license and use of software made available to your company from Infor pursuant to a separate agreement, the terms of which separate agreement shall govern your use of this material and all supplemental related materials ("Purpose"). In addition, by accessing the enclosed material, you acknowledge and agree that you are required to maintain such material in strict confidence and that your use of such material is limited to the Purpose described above. Although Infor has taken due care to ensure that the material included in this publication is accurate and complete, Infor cannot warrant that the information contained in this publication is complete, does not contain typographical or other errors, or will meet your specific requirements. As such, Infor does not assume and hereby disclaims all liability, consequential or otherwise, for any loss or damage to any person or entity which is caused by or relates to errors or omissions in this publication (including any supplementary information), whether such errors or omissions result from negligence, accident or any other cause. Without limitation, U.S. export control laws and other applicable export and import laws govern your use of this material and you will neither export or re-export, directly or indirectly, this material nor any related materials or supplemental information in violation of such laws, or use such materials for any purpose prohibited by such laws. Trademark Acknowledgements The word and design marks set forth herein are trademarks and/or registered trademarks of Infor and/or related affiliates and subsidiaries. All rights reserved. All other company, product, trade or service names referenced may be registered trademarks or trademarks of their respective owners. Publication Information Release: Infor Warehouse Mobility for Infor ERP LN Version 4.00 Publication date: May 20, 2013
Contents About This Guide................................................................3 About Infor Warehouse Mobility...................................................3 Contacting Infor...............................................................3 Chapter 1 Overview..............................................................5 Installing the application.........................................................5 Installing the package in ERP LN..................................................5 Chapter 2 Installing the application.................................................7 Completing pre-installation tasks..................................................7 Installation tasks...............................................................8 Installing Java..............................................................8 Installing Apache Tomcat....................................................11 Installing MySQL..........................................................13 Post-installation tasks..........................................................16 Configuring the ports and environment.........................................16 Setting up the development environment.....................................17 Configuring the ERP LN server...............................................18 Configuring Bridge2World...................................................19 Configuring system performance options........................................20 Starting services...........................................................20 Installing and configuring the PuTTy terminal emulator.............................20 Verifying the installation.....................................................23 Chapter 3 Installing the package in ERP LN.........................................25 Adding the Warehouse Mobility package...........................................25 Installing Warehouse Mobility components.........................................29 Licensing Warehouse Mobility Components........................................31 Infor Warehouse Mobility for Infor ERP LN - Installation Guide 1
2 Infor Warehouse Mobility for Infor ERP LN - Installation Guide
About this guide This guide explains how to install Infor Warehouse Mobility for Infor ERP LN and its associated software and how to configure server parameters for your specific site. About Infor Warehouse Mobility Infor Warehouse Mobility is a comprehensive and robust data collection system that simplifies operations by streaming real-time information between the shop floor and your ERP system. Infor Warehouse Mobility handles all communications with your ERP system. Users select transactions and scan bar-coded data by using hand-held radio frequency (RF) scanners. Infor Warehouse Mobility formats the data and transmits it to your ERP system. Any information from the ERP is displayed as it was received. With Infor Warehouse Mobility, users work with data-entry screens that show only relevant data fields, many of which include default values. Infor Warehouse Mobility updates your ERP database with the same data integrity as transactions that you enter through the standard ERP user interface at a desktop terminal. You can edit Infor Warehouse Mobility parameter data by using a set of simple Web pages. The actual data is stored in XML files that correspond to the structure of your site. Contacting Infor If you have questions about Infor products, go to the Infor Xtreme Support portal at www.infor.com/inforxtreme. If we update this document after the product release, we will post the new version on this Web site. We recommend that you check this Web site periodically for updated documentation. If you have comments about Infor documentation, contact documentation@infor.com. Infor Warehouse Mobility for Infor ERP LN - Installation Guide 3
4 Infor Warehouse Mobility for Infor ERP LN - Installation Guide
Chapter 1: Overview 1 This chapter provides an overview of the Infor Warehouse Mobility for Infor ERP LN installation procedure. There are two major components to this procedure: Installing the application and installing the package in ERP LN. Installing the application This section describes how to perform the frontend installation of Infor Warehouse Mobility for Infor ERP LN. Instructions are provided for installing Warehouse Mobility, Java, Apache Tomcat, and MySQL and for configuring your server. Installing the package in ERP LN This section describes how to perform the backend installation of Infor Warehouse Mobility for Infor ERP LN by configuring the application in ERP LN. Instructions are provided for creating the Warehouse Mobility package and making it available to existing package combinations in ERP LN. Infor Warehouse Mobility for Infor ERP LN - Installation Guide 5
Overview 6 Infor Warehouse Mobility for Infor ERP LN - Installation Guide
Chapter 2: Installing the application 2 This document provides instructions for installing Infor Warehouse Mobility software on an Infor ERP LN server. Completing pre-installation tasks Before installing Infor Warehouse Mobility, you must complete these tasks: 1 Install the Infor Integration Suite. See the Infor Integration Installation Guide (U9018C) for details. 2 Ensure you have valid licenses for Product IDs 7035, 7056, and 7066. You can obtain licenses through the Infor Solutions License Manager (SLM). To install the SLM client, see the Infor Solutions License Manager Installation and Configuration Guide (U9200E US). 3 Disable the User Account Control notifications on your Windows 7, Windows 2008, Windows 2008 R2, Windows XP, or Windows 2003 server. To disable UAC notifications: a. Click Start > Control Panel > User Accounts > Change User Account Control Settings. b. Drag the slider to the bottom setting. c. Restart the server. 4 Create these variables: Variable name BAANHome SSA_TA6 Variable value Provide the path of the SLM home directory Provide the director path of the Infor Integration Suite 5 Restart the server. Infor Warehouse Mobility for Infor ERP LN - Installation Guide 7
Installing the application Installation tasks Use the Infor Warehouse Mobility for ERP LN Setup Wizard to install Infor Warehouse Mobility for Infor ERP LN. The wizard installs the Infor Warehouse Mobility software, along with supporting elements such as the Java SE Development Kit and Java Runtime Environment, Apache Tomcat service, and MySQL. To install Infor Warehouse Mobility for Infor ERP LN: 1 Open the Infor Warehouse Mobility for Infor ERP LN executable file (for example, b2bar.exe, InforWarehouseMobility_4.00.00.exe, or InforWarehouseMobility_4.01.00.exe). The InstallAnywhere dialog box displays file extraction progress. 2 When file extraction is complete, the Infor Warehouse Mobility for Infor ERP LN Setup Wizard dialog box opens to the Introduction screen. Click Next. 3 The installation directory dialog box is displayed. Accept the default installation directory (C:\), then click Next. 4 The pre-installation summary dialog box is displayed. Click Install. Installing Java 5 The license dialog box is displayed. Select I Accept the Terms in the License Agreement and click Next. 8 Infor Warehouse Mobility for Infor ERP LN - Installation Guide
Installing the application 6 The setup type dialog box is displayed. Select Typical and then click Next. The Java environment is installed. 7 When installation is complete, click Finish. If you are using Windows XP, you may be prompted to reboot the server. Do not reboot. 8 The license dialog box is displayed. Click Accept. 9 The custom setup dialog box is displayed. Click Change. Infor Warehouse Mobility for Infor ERP LN - Installation Guide 9
Installing the application 10 In the Folder name field, specify C:\Infor\WarehouseMobility\jdk1.6.0_11. Click OK. 10 Infor Warehouse Mobility for Infor ERP LN - Installation Guide
Installing the application 11 The custom setup dialog box is displayed. Click Next. The Java development kit is installed. 12 You are prompted to select a destination folder for the Java Runtime Environment. To accept the default destination folder, click Next. 13 The installation complete dialog box is displayed. Click Finish. If you are using Windows XP, you may be prompted to reboot the server. Do not reboot. 14 You are prompted to register your Java software. You may register or not register; the installation process will not be affected. Installing Apache Tomcat 15 The Apache Tomcat Setup dialog box is displayed. Click Next. 16 The License Agreement dialog box is displayed. Click I Agree. 17 The Choose Components dialog box is displayed. Click the plus sign to expand the Tomcat directory. Select Service and then click Next. Infor Warehouse Mobility for Infor ERP LN - Installation Guide 11
Installing the application 18 Choose Install Location dialog box is displayed. Specify C:\Infor\WarehouseMobility\Tomcat 6.0, and then click Next. 19 The Apache Tomcat Configuration dialog box is displayed. If port 8080 is already in use in your network, specify a different port in the HTTP/1.1 Connector Port field. Otherwise, accept the default port 8080. Click Next. 12 Infor Warehouse Mobility for Infor ERP LN - Installation Guide
Installing the application 20 Specify a password for the admin account. Click Next. 21 The Apache Tomcat Java Virtual Machine dialog box opens. Accept the default directory path by clicking Install. Apache Tomcat is installed. 22 The Apache Tomcat Setup Complete page is displayed. Click Finish. The Apache Service Manager starts the Apache Tomcat service. Installing MySQL 23 An alert message that prompts you to click OK after MYSQL setup is finished. Do not click OK at this time. The MySQL Information dialog box is also displayed. In the MySQL Information dialog box, click Next. Infor Warehouse Mobility for Infor ERP LN - Installation Guide 13
Installing the application 24 The Choose Destination Location dialog box is displayed. Click Browse. 25 In the Folder name field, specify C:\Infor\WarehouseMobility\mysql, and then click OK. 26 A prompt is displayed that asks whether to create the new folder. Click Yes, and then click Next. 14 Infor Warehouse Mobility for Infor ERP LN - Installation Guide
Installing the application 27 The setup type dialog box is displayed. Select Typical, and then click Next. MySQL is installed. 28 When installation is complete, click Finish. 29 In the MYSQL SETUP message prompt, click OK. Infor Warehouse Mobility for Infor ERP LN - Installation Guide 15
Installing the application 30 The Get User Input dialog box is displayed. Specify a password for the MySQL Root account, and then click Next. Infor Warehouse Mobility for Infor ERP LN is installed. 31 When installation is complete, click Done. Post-installation tasks After Infor Warehouse Mobility for Infor ERP LN is installed, you must configure the Infor Warehouse Mobility application, configure system performance options, reboot the server, and start key services. You must also install PuTTy or other terminal emulator software to emulate scanner functionality on your computer. Finally, you should verify the installation. Before configuring the Warehouse Mobility application, you must complete the steps below on the ERP LN server. If the ERP LN server is either on Windows or on Linux or Unix with Samba Share enabled: 1 Create a domain account that has local administrator rights on the server on which Infor Warehouse Mobility is installed. You will use this account to start Infor Warehouse Mobility application services. 2 Ensure that the server contains a shared directory that has read and write permissions for the domain user account used to start Infor Warehouse Mobility services. If the ERP LN server is on Linux or Unix without Samba Share: 1 Enable FTP service on the server. 2 Create a user account with FTP read, write, and execute permissions. Configuring the ports and environment To configure the ports and environment: 1 If Java has been installed in the Program Files or Program Files (x86) directory, open the file c:\b2bar\config\adc_settings.xml and replace this line of code: <!ENTITY jvm "C:\Infor\WarehouseMobility\jdk1.6.0_11/bin/java"> with this line: <!ENTITY jvm "java"> 2 By default, the B2BGend service uses the ports listed in the code below. If these ports are already being used by other applications, update the file c:\b2bar\config\adc_settings.xml to use available ports: <config_param id="b2bgend"> <config_param id="emulator_port">6005</config_param> <config_param id="emulator_thread_count">0</config_param> 16 Infor Warehouse Mobility for Infor ERP LN - Installation Guide
Installing the application <config_param id="webscanner_port">6008</config_param> <config_param id="emulator_poll_time">100</config_param> <config_param id="emulator_conn_time_out">0</config_param> <config_param id="use_sockets_with_scanner_process">yes</config_param> <config_param id="scanner_process_port">6009</config_param> <config_param id="no_of_socket_reties">10</config_param> <config_param id="debug_level">5</config_param> <config_param id="thread_log_files">no</config_param> <config_param id="device_log_files">no</config_param> <config_param id="object_log_files">no</config_param> <config_param id="show_stack_traces">yes</config_param> <config_param id="admin_server_object_name">b2bgendadminserver</ config_param> <config_param id="rmi_registry_port">12345</config_param> </config_param> 3 By default, the Bridge2World service uses port 6010. If this port is already being used by another application, update the file c:\b2bar\config\adc_settings.xml to use an available port: <config_param id="bridge2world"> <config_param id="ip_address">localhost</config_param> <config_param id="port">6010</config_param> <config_param id="retry_count">3</config_param> <config_param id="hand_shake_in_use">yes</config_param> </config_param> Setting up the development environment To set up the development environment: 1 Make these updates to these lines of code in the file c:\b2bar\config\adc_settings.xml: <environment id="development" relative_env="production"> <config_dir_list> <!-- Absolute Directories --> <config_dir id="env_dc" relative_dir="dc">development</config_dir> <config_dir id="data" relative_dir="env_dc">data</config_dir> <config_dir id="params" relative_dir="env_dc">params</config_dir> <config_dir id="barcode_label_files_path" relative_dir="env_dc">data/barcode_labels</config_dir> <config_dir id="barcode_label_output_dir">&basedir;\barcode_out</ config_dir> </config_dir_list> <config_param_list> <config_param id='scanner_program'>&jvm; -classpath &basedir;/ development/dcjava/ibccustomertransaction.jar;&basedir;/jars/ ibctransaction.jar;&basedir;/jars/ibcframework.jar;&basedir;/jars/ ibcxmltypes.jar -Dfile.encoding=UTF-8 - Djava.util.logging.config.file=&basedir;/config/logging.properties - Djava.util.logging.FileHandler.limit=262144000 - Infor Warehouse Mobility for Infor ERP LN - Installation Guide 17
Installing the application Djava.util.logging.FileHandler.count=2 blx.framework.application.adcinterface &basedir; &basedir;/config/ adc_settings.xml</config_param> <config_param id="sql"> <config_param id="use_ftp">no</config_param> <config_param id="baan_server"> <config_param id="company_suffix">p</config_param> <config_param id="qry_fserver_data_dir"> physical path of shared directory</config_param> <config_param id="mounted_sql_data_dir"> shared directory </ config_param> <config_param id="issue_lcd">no</config_param> <config_param id="ftp"> <config_param id='user'>baan_user</config_param> <config_param id='password'>baan_password</config_param> <config_param id='ip_address'>baan_server_ip_address </config_param> </config_param> </config_param> </config_param> </config_param_list> </environment> 2 Change these parameters in the development environment: If the ERP LN server is either on Windows or on Linux or Unix with Samba Share enabled: a. For the use_ftp parameter, specify No. b. For the qry_fserver_data_dir parameter, specify the physical path of the shared directory of the ERP LN server (for example, C:\Infor\WarehouseMobility). c. For the mounted_sql_data_dir parameter, specify the network path of the shared directory of the ERP LN server (for example, \\servername\warehousemobility). If the ERP LN server is on Linux or Unix without Samba Share: a. For the use_ftp parameter, specify Yes. b. For the qry_fserver_data_dir parameter, specify the physical path of the shared directory of the ERP LN server (for example, C:\b2bar\sqldata). c. For the issue_lcd parameter, specify Yes. d. Replace these entries: Replace baan_user with the FTP user name. Replace baan_password with the FTP password. Replace baan_server_ip_address with the IP address or host name of ERP LN. Configuring the ERP LN server To configure ERP LN server details including the host name or IP address, company number, and bus component name: 18 Infor Warehouse Mobility for Infor ERP LN - Installation Guide
Installing the application 1 Open this file: C:\b2bar\config directory\resources.xml. 2 Update these XML values: ResourceName: Specify the tmboaserver name that is configured in the Infor Integration Suite or central integration console. This name is case-sensitive. ResourceIP: Specify the ERP LN server host name or IP address. ResourceCompany: Specify the ERP LN company number. For example: <Resource> <ResourceName>OWProcProd100A</ResourceName> <ResourceIP>ERPLNServer</ResourceIP> <ResourcePort>1</ResourcePort> <ResourcePrefix>b999</ResourcePrefix> <ResourceEnvironment>D</ResourceEnvironment> <ResourceCompany>100</ResourceCompany> <ResourceType>SOA</ResourceType> <SleepTime>0</SleepTime> </Resource> 3 To meet data processing requirements, you should set up at least two bus components. Configuring Bridge2World The Bridge2WorldService.ini file provides the environment variables and paths needed to start the Bridge2WorldService. When you run the Infor Warehouse Mobility for Infor ERP LN executable file, the Bridge2WorldService.ini file is automatically updated. To start Bridge2World: 1 Open this file: C:\b2bar\common\bin\Bridge2WorldService.ini. [Processes] process1="{java_home}\bin\java.exe" -Xrs -Xmx1024m -Xms1024m -classpath "{DC}\common\Bridge2World\Bridge2World.jar;{DC}\openworldclasses; C:\Program Files\Baan\shared\java\com_baan_bclm.jar;C:\Documents and Settings\All Users\Application Data\Infor\Infor Integration\java;{SSA_TA6}\java;{DC}\openworldclasses\jars\ow.jar;{SSA_TA6 }\java\ow3p.jar;{dc}\openworldclasses\jars\activation.jar;{dc}\openworldcl asses\jars\mail.jar;{dc}\openworldclasses\jars\providerutil.jar;{dc}\openw orldclasses\jars\saaj-api.jar;{dc}\openworldclasses\jars\saajimpl.jar;{dc}\openworldclasses\jars\xalan.jar;{dc}\openworldclasses\jars\x ercesimpl.jar;" -Xrs -Djava.util.logging.config.file={DC}/config/ mysql.logging.properties blx.framework.b2w.bridge2world {DC}/config/ resources.xml {DC}/config/parameters.xml 2 Ensure that the path to the file com_baan_bclm.jar matches the installation path of the Infor Solutions License Manager client. 3 Set up SSA_TA6 as a system environment variable pointing to the Infor Integration Suite installation directory. Infor Warehouse Mobility for Infor ERP LN - Installation Guide 19
Installing the application 4 In the Documents and Settings folder of the Windows user account directory, open the.owconfig folder. 5 In the.owconfig folder, open the directory history file using Notepad. The URL for accessing open world configuration is displayed. This URL may be file-based or Idap-based. Include this URL in the classpath. 6 If the directory history file is on a network path, you should copy it to the ADC server to ensure that it is always accessible. Update the properties of the copied file with the new location. Note: If Bridge2World does not work when you use Warehouse Mobility transactions, copy the complete command from file {DC}/log/Bridge2WorldService.log into the command line and run it. Detailed debug messaged are displayed on the command line that will help you identify and resolve any problems. Configuring system performance options To configure system performance options: 1 Select My Computer > System Properties. The System Properties window is displayed. 2 On the Advanced tab in the Performance section, click Settings. The Performance Options window opens. 3 On the Data Execution Prevention tab, select turn on DEP for essentials Windows programs and services only. Click OK. 4 You are prompted to reboot the server. Click Reboot. Starting services To start B2BGend, Bridge2WorldService, and Apache Tomcat: 1 Select Control Panel > Administrative Tools > Services. The Services window is displayed. 2 Select these items and click Start for each one: Apache Tomcat B2BGend Bridge2World 3 Restart the server. Installing and configuring the PuTTy terminal emulator Each PuTTy connection consumes one Infor Warehouse Mobility for Infor ERP LN license. Also, the PC on which PuTTy is installed must have a static IP address. 20 Infor Warehouse Mobility for Infor ERP LN - Installation Guide
Installing the application To install and configure the PuTTy terminal emulator: 1 Open an Internet browser and navigate to http://www.chiark.greenend.org.uk/~sgtathan/putty/ download.html to download the PuTTy program (putty.exe). 2 When the download is complete, double-click putty.exe to start the PuTTy terminal emulator program. The PuTTy Configuration dialog opens. 3 In the Category field, select Session, then configure these parameters: In the Host Name (or IP Address) field, specify 127.0.0.1 or localhost. In the Port field, specify 6005. Under Protocol, select Telnet. In the Saved Sessions field, specify a name for this session. 4 In the Category field, select Terminal, then configure these parameters: In the Line discipline options area, under Local echo, select Force off. In the Line discipline options area, under Local line editing, select Force off. Infor Warehouse Mobility for Infor ERP LN - Installation Guide 21
Installing the application 5 In the Category field, select Terminal > Keyboard, then configure these parameters: In the Change the sequences sent by area, under The Backspace key, select Control-H. In the Change the sequences sent by area, under The Function keys and keypad, select SCO. 6 In the Category field, select Window, then configure these parameters: In the Rows field, specify 20. In the Columns field, specify 25. Under When window is resized, select Change the size of the font. 7 In the Category field, select Window > Appearance, then configure these parameters: a. In the Font Settings area, click Change. The Font dialog opens. b. Select Font Courier New, Font Style Regular, and Size 14, then click OK. The Font dialog closes. 8 In the Category field, select Window > Behaviour. Then, in the Window title field, specify ADC Localhost. 9 In the Category field, select Window > Translation. Then, in the Character set translation area, in the Remote character set list, select UTF-8. 10 In the Category field, select Session. In the Load, save, or delete a stored session area, click Save. 22 Infor Warehouse Mobility for Infor ERP LN - Installation Guide
Installing the application Verifying the installation To verify the Infor Warehouse Mobility for Infor ERP LN installation: 1 In an Internet browser, navigate to http://localhost:8080/adcadmin. The Infor Warehouse Mobility login page opens. 2 Specify the user name (admin) and password that you created in step 20 of the Installing Apache Tomcat section. Click Sign In to verify that you can sign in to the Warehouse Mobility Administration Tool user interface. 3 Open a Command Prompt dialog and specify the command telnet local host 6005. A PuTTy interface showing the scanner sign-in screen is displayed. 4 Sign in with a valid user name and password, or use the default user name (infor) and password (infor). The main menu is displayed. 5 Select Item Inquiry. 6 Specify a valid item number to verify that the scanner can access the ERP. Infor Warehouse Mobility for Infor ERP LN - Installation Guide 23
Installing the application 24 Infor Warehouse Mobility for Infor ERP LN - Installation Guide
Chapter 3: Installing the package in ERP LN 3 This chapter describes how to create the package Warehouse Mobility (br) and make it available to the existing package combinations in ERP LN. Before starting installation, complete the steps below. Adding the Warehouse Mobility package To create a new package VRC for Warehouse Mobility and add it to the package combination: 1 Open the Maintain Packages (ttadv1100m000) form. 2 In the Package field, specify br. 3 In the description field, specify WarehouseMobility. 4 Open the Package VRCs (ttadv1511m000) form. 5 Click Find. A Find window opens. Infor Warehouse Mobility for Infor ERP LN - Installation Guide 25
Installing the package in ERP LN 6 In the Package field, specify br. Click OK. The br package is displayed. 7 To create a new VRC for the br package, click New. 8 Update the VRC with the PMC solutions information. If you are using ERP LN Feature Pack 8, the default values are B61U a8 fp08. The VCR values in this document apply to set up in ERP LN Feature Pack 8. If you are using Feature Pack 7, specify a7 (instead of a8) in the Release field, and specify fp07 (instead of fp08) in the Customer field for all VCRs mentioned in this guide. Specify this information: Version Release Customer Description 9 To create another Package VRC for the br package, click New. 10 Specify this information: Version Specify B61C. Release Specify a8. Customer Specify FP08. 26 Infor Warehouse Mobility for Infor ERP LN - Installation Guide
Installing the package in ERP LN Description Specify WM Custom Package VCR. Here is the derivation structure for these newly created VRC packages: VCR Derived from: Purpose: PMC Base VRC B61U_a8_fp08 Contains the standard br components B61U_a8_ibr B61C_a8_fp08 B61U_a8_fp08 Contains the customized br components B61C_a8_ibr 11 Open the Maintain Directories of Software Components (ttadv1115m000) form. 12 Click Find. A Find window opens. 13 Specify this information: Package Version Release Customer Click OK. The specified package VRC is displayed. 14 Create new directories for the new VRCs: B61U_a8_fp08 B61C_a8_fp08 Infor Warehouse Mobility for Infor ERP LN - Installation Guide 27
Installing the package in ERP LN 15 Open the Packages by Package Combination (ttaad1121m000) form. Add the B61U_a8_fp08 VRC to all package combinations that will use Warehouse Mobility. 16 Click Save. Do not perform the Rebuild DD at this point. 28 Infor Warehouse Mobility for Infor ERP LN - Installation Guide
Installing Warehouse Mobility components To install Warehouse Mobility components: Installing the package in ERP LN 1 From the BackEnd folder on your installation disc, copy the component file to your hard drive: IWMR1F81000001.tar.gz (for FP8) or IWMR2000000001.tar.gz (for FP7). 2 Open the Update VRCs (ttpmc2140m000) form. 3 Link these VRCs: For Feature Pack 8 users: Link update VRC B61U_a8_fp08 with base VRC B61U_a8_ibr. Link update VRC B61C_a8_fp08 with base VRC B61C_a8_ibr. For Feature Pack 7 users: Link update VRC B61U_a7_fp07 with base VRC B61U_a7_ibr. Link update VRC B61C_a7_fp07 with base VRC B61C_a7_ibr. 4 Open the Scan Solution/Patch File (ttpmc2200s000) form. 5 In the Solution File field, specify the path for the component file (IWMR1F81000001.tar.gz or IWMR2000000001.tar.gz) on your hard drive. Infor Warehouse Mobility for Infor ERP LN - Installation Guide 29
Installing the package in ERP LN 6 Open the Process Solutions (ttpmc2101m000) form. 7 Select the Infor Warehouse Mobility solution. 8 Select Specific > Check and Install. The Warehouse Mobility components are installed. 9 Open the Packages by Package Combination (ttaad1121m000) form. 10 Select Specific > Rebuild DD. 11 Log out of ERP LN and log back in again. 12 Open the Create Tables (ttaad4230m000) form. 13 Create tables for the br package for each company that will use Warehouse Mobility. See Create Tables (ttaad4230m000) in the ERP LN Web Help for details. 30 Infor Warehouse Mobility for Infor ERP LN - Installation Guide
Licensing Warehouse Mobility Components Installing the package in ERP LN You must license every Warehouse Mobility component. You must obtain a license for each application server and customer code combination that uses Warehouse Mobility components. To license Warehouse Mobility components: 1 Open the License Generator (brmcs9100m999) form. 2 Generate a Requested Licenses string. 3 Copy the Requested Licenses string and contact the Warehouse Mobility support team at the Infor Xtreme Support portal (www.infor.com/inforxtreme). Infor Warehouse Mobility for Infor ERP LN - Installation Guide 31
Installing the package in ERP LN 32 Infor Warehouse Mobility for Infor ERP LN - Installation Guide
Index A Apache Tomcat 11 B Bridge2World 19 C configuring ports 16 E environment 17 I installation 8 J Java 8 M MySQL 13 P ports 16 post-installation 16 pre-installation 7 S server 18 starting services 20 system performance 20 Infor Warehouse Mobility for Infor ERP LN - Installation Guide 33