Broadband Groomer F-330 Series Falco is the industry first Access Unit designed to offer access to SDH/SONET/PDH backbones by different. extends the usefulness of WAN/LAN to and GbE backbones. Falco combines several network access technologies into one intelligent platform designed to extend the usefulness of monitoring equipment such as Probes, Analyzers, IDS and Surveillance Systems. As a Groomer, Falco extracts DS0 or a combination of DS0 s from high speed links such as, STM-4 or up to 6 and delivers them to multiple or E1 ports. Falco can also extract DS0 s from multiple E1/T1 and deliver them to /OC-3 outputs. Applications Access system for: Probes Protocol Analyzer Security equipment Forensic equipment Surveillance systems SDH/SONET Channelized Groomer Multiple E1/T1 monitoring Built-in Cross-connect matrix for Grooming of tributary streams Automatic Protection Switching Ports: /OC-3 Electrical STM-4/OC-12 6/OC-48 E1/ T1 WAN Monitor Ports: Multiple E1/T1 /OC-3 STM-4/OC-48
F-330 B to Electrical Grooming Channelized, STM-4 or 6 can be seen as multiconductor cables containing many individual conductors. / OC-3 Each conductor is organized in TDM Frames with standardized time slots. Falco extracts the desired time slots and format them into consolidated new streams to match test equipment requirements. node node User can configure Falco cross-connect logic to extract the desired streams or parts of streams, format them into data formats required by the specific test equipment and send such consolidated new streams to selected Falco output tests ports. E1/T1 Constant with APS Redundant links are often deployed throughout SDH / SONET networks to provide fault tolerance. Falco supports APS (Automatic Protection Switching) configurations and provides uninterrupted monitoring access. Protected links Active links Faulty line If one or more active links are failing, the continues to receive data from protected link.
F-330 B and Ethernet Links Cable Lower cabling cost Easy to install Immune to noise Much higher distance Base Unit Protected Point RIM DDF Cabling from Falco to PMP is reduced to a minimum Flexible Output Falco E1/T1 outputs are available by output Connector Panels. Interface topology Electrical Models F-330 B Series Ports 2, 4 or 8 2, 4 or 8 OC-3 Test Ports 8 to 128 E1 Connector Panels F-CP-64-J4-R 32 RJ-45 connectors Impedance 120 F-CP-64-N3-R 64 1.0/2.3 coax connectors F-CP-32-E75-B-0-R 32 circuits 32 BNC coax connectors
F-330 C Electrical to Multiple E1/T1 E1/T1 Connector panel Falco 330 C can monitor multiple E1/T1 lines, extract desired timeslots and output them onto /OC-3 interfaces. Falco 330 C is a System including a Base Unit and a set of Connector Panels providing E1/T1 inputs. Interface topology Electrical Models F-330 C Series Ports 32 to 128 E1 32 to 128 T1 Test Ports 1 or 2 1 or 2 OC-3 Connector Panels F-CP-64-J4-R 32 RJ-45 connectors Impedance 120 F-CP-64-N3-R 64 1.0/2.3 coax connectors F-CP-32-E75-B-0-R 32 circuits 32 BNC coax connectors
F-330 D to DS0 DS0 E1 E1 E1 Falco-330 D has multiple inputs. Falco-330 D can extract any DS0 or combination of DS0 and output them onto an optical. Interface topology Models Ports Test Ports over 300 E1 s F-330 D Series 4 to 12 1 or 2 1 6 or 1 OC-48 1 STM-4 or 1 OC-12 By connecting RIM s (Remote Interface Module) to Falco-330 D it is possible to monitor up to 310 E1 and output the selected DS0 to an optical. RIM IDC termination RJ-45 Coax
F-330 Management Falco Management Falco supports several management modes : Astro Falco Configurator Telnet SNMP Manager Group of output Output channels Output timeslots Falco Configurator Falco Configurator has been specifically designed to configure Falco and its Expander. It offers an user-friendly interface running under Window 2000 XP and allows to save and restore configuration profiles as well as import/export of mapping information to and from text files. Input fibers Input channel K, L, M coordinates Input timeslot Telnet A rich set of Telnet menus and screens allows remote and local set up and monitoring of Falco system. Telnet access is supported over Ethernet or a serial management port. SNMP Manager Falco contains a standard SNMP agent. This allows Falco to be readily integrated into larger Management Systems managed by any standard SNMP manager. Astro Astro is a SNMP manager specifically designed to manage all Access System product family. WEB based architecture Astro is accessible via Web by a standard web browser. Astro provides Falco users with secure access, automatic reports and easily navigated single and multiple views. Model Hardware Configuration Base Unit Input Conn Panel Output Conn Panel F-330 B No Over 16 E1/T1 RIM Yes F-330 C All F-300 series Yes No No models have 2U chassis 19 rack F-330 D mountable No No Yes Multiple Splitters Falco-330 can be equipped with an external, totally passive Splitter. OS-102 Multiple Splitter for 8 bidirectional fibres OS-102 Power: - 220/115 Vac, 50/60 Hz Single or Redundant - 36/72 Vdc Single or Redundant GENERAL Dimensions: 483 W x 437 D x 88 mm H Weight: < 8 Kg (17,6 pounds) Telena is committed to the continuous improvement of its products, consequently specifications may change without notice Headquarters: Via Savona, 146-20144 Milano - Italy Tel. +39-02-422001- Fax +39-02-48952155 e-mail: sales@telena.it website: www.telena.eu 273/09