FTTx Architekturen mit ISAM

FTTx Architekturen mit ISAM

The Alcatel-Lucent ISAM Family Allowing operators to build out their fiber network while leveraging their existing copper assets One ISAM family 7302 ISAM FD DSL & Fiber 7330ISAM FD DSL & Fiber Any FTTx deployment 7356 REM DSL & Fiber 7330 RA REM/SEM Aggregation Any service 7352 ONT VDSL2 ONT & CPE Family Field-proven & innovative CO/DSL, FTTN, FTTB/C, FTTH Residential Triple Play >250 customers, >200M DSL lines All boxes fit for OSP deployment Business Services >1M ONTs shipped Industrial Temp hardening Mobile Backhaul 10G GPON Application Enablement Processor Green DSL, Bonding Common equipment practice One Access Management System xdsl/voice/gpon/p2p Vectoring, Phantom Mode

7302 and 7330 ISAM FD at a glance Choice of fiber technology 8p GPON line card with C+ optics, up to 128-split 36p P2P line card, FE/GE Choice of shelf size 18-slot shelf, 864 VDSL2 / 18,432 GPON / 648 P2P subs 10-slot shelf, 480 VDSL2 / 10,240 GPON / 360 P2P subs Choice of system capacity 10Gbps backplane 320G NT, 10Gbps per line card 100G NT, 2.5Gbps per line card 24G NT, 1Gbps per line card Choice of DSL capacity Standard 20Mbps/sub capacity for xdsl (1Gbps LTs) High-capacity 50Mbps/sub for VDSL2 (2.5Gbps LT) Choice of DSL density 72p multi-adsl and voice LTs 48p splittered LTs with for multi-adsl and VDSL2 MPLS capabilities Scalability, availability, smart operations, simplicity AE co-processor Embedded Application Enablement co-processor on new Network Termination card, for new revenue streams

7302 & 7330 ISAM FD Platform overview GPON/P2P Fiber 8p GPON LT (New ) 36p P2P LT (GE/FE) (New) High capacity/density DSL High-capacity VDSL2 VDSL splittered variant (New) Standard & high-cap NTs 24Gbps NT (1Gbps per LT) 100Gbs NT (2.5Gbps per LT) 320Gbps NT (10Gbps per LT) (New) DSL New Fiber New NT New New

MPLS Key benefits for Access Extended support for business and residential services Scalability Availability Extended label space and stacking is scaling residential services delivery and wholesale Business customers can use dual VLAN tagged Ethernet frames Standards-based redundancy and recovery Avoid non-standard or slow protection mechanisms Fast failure detection and recovery times (sub 50 ms) Lower OPEX Smart Ops Faster subscriber provisioning and network configuration Faster troubleshooting: end-to-end MPLS OAM Simpler network design Simplicity Unified forwarding model for Access, Aggregation and core Same QoS and multicast approach across the entire network Minimizing the number of operational points

Alcatel-Lucent s ISAM FD Key Differentiators Product Capacity State of the Art Technology Based on first in class DSL and fiber access platforms Green technologies SROS inside: best in class IP protocol stack Full Network Analyzer integration on copper and fiber Available Bit rate End-user satisfaction Power Consumption CAPEX (racks, fans) Real-estate costs Deployment Flexibility Most widely deployed access platform: 250 customers Designed for the field : EMC & Industr.Temp hardened NT redundancy and full load-sharing Low power consumption: on board DC-DC convertors Availability Revenue per PoP Service costs Robust and Field Proven Designed for mass-market multiservice Highest switching capacity platform on the market Highest capacity and density per board Maintenance costs Any service, any technology, any deployment model Same technology and software across family Build to support Open Access Networks Unified network management: Scalability, HA and OSS integration Scalability Reach Operational costs

VDSL2, MELT, Vectoring

The Broadband Service Mix Possible issues affecting the copper lines Intermittent contact Powered-down CPE Powered-up CPE, but no sync Missing POTS splitter Untwisted in-house wiring Crosstalk (possibly Impulse noise time-varying) Equipment fault Open circuit MDF Short circuit miswiring Loop unbalance RFI (possibly time-varying) Degraded contact CPE interop problem

Evolution from external test heads to integrated DSLAM testing Operator Operator Test head Network Analyser control for processing Test head Test Access Matrix Access network Access network DSLAM DSLAM Integrated measurement on line card External Testhead solution Integrated testing and 5530 NA-C Test access matrix internal to ISAM: MTA solution Test access matrix external to ISAM: ADF solution or external TAM Bundled NA+ISAM solution SELT + DELT Can be complemented by NBLT / MELT

MELT benefits Why MELT line cards are on the ISAM roadmap 3 Test head 1 DSLAM TAM MDF 2 Central Office 1 Pro-active Maintenance Low-level line analysis Detects line degradation Earlier detection than SELT/DELT Provides warning before DSL service is impacted 2 Signature Detection 3 Testhead Replacement Fast fault localization (in-house or outside plant) Cost-effective testhead replacement Detect signature Provides demarcation point between outside plant and inhouse useful in case of unbundling Line testing from DSLAM reduced OPEX Space-constrained locations (e.g. cabinets) with no room for testheads

MELT Funktion für DSL-Baugruppen Integrierte Lösung für physikalische Leitungstests im MSAN Realisierung ILTF/MELT-Lösung auf jeder DSL-Baugruppe Konfiguration und Datenerfassung über Managementschnittstelle Diagnose und Analyse erfolgt über ein Expertensystem wie z.b. 5530NA xdsl Chip DSL Baugruppe ILTF (centralised per board) ISAM/MSAN

NVLT-N und NVLT-Q NVLT-N/Q Product Description Family of high-capacity 48 port VDSL2 line cards, capable of delivering 50 Mb/s per subscriber upstream and downstream (100 Mb/s peak). Several variants are available: NVLT-N with integrated MELT for all digital loop scenarios or for POTS lines NVLT-Q for ISDN lines Key Features 1. 2. 3. 4. 5. 6. 7. 8. High-capacity (2,5 Mb/s) 48 ports VDSL2 LT in upstream and downstream HW-ready for N-pair PTM bonding Green DSL: Eco-efficient design, MaxSNRM support, low power in L3 mode POTS (NVLT-N) and ISDN (NVLT-Q) support G.993.2 profile 8b and 17a support Backwards ADSL/ADSL2/ADSL2+ compatible Support of physical layer retransmission and SRA for ADSL2+ and VDSL2 Industrial hardened Customer Benefits 1. 2. 3. 4. 5. 6. 50 Mb/s sustained per subscriber (100 Mb/s peak) in upstream and downstream Lower power consumption compared to NVLT-G/H improved ADSL/VDSL upstream performance in low/medium noise conditions Support for CO, cabinet, and MDU deployment scenarios Backwards compatibility to ADSL/ADSL2/ADSL2+ for smooth migration Indoor/Outdoor deployments

VDSL2 Vectoring Downstream bit rate [Mbps] Crosstalk = dominant disturber for VDSL2 all lines vectored 50% lines vectored no vectoring Vectoring = noise cancellation measure crosstalk from each line into all other lines in cable (binder) cancel the noise with an anti-phase signal Loop length [m] Standardized by ITU: G.993.5 (G.vector) approved 1st May, 2010 editor = Frank v/d Putten, Alcatel-Lucent Vectoring cancels noise - potential for 25%-100% bit rate increase

SYSTEM-LEVEL VECTORING (SLV) LT NDLT-F/G and NDLS-E 48p SLV line cards Support of system-level vectoring Vectoring across all SLV LTs in vectoring group No support of BLV Feature parity with NVLT-P Similar as for NDLT-C Incl. 2p ATM ADSLx bonding, 2p PTM VDSL2 bonding HW-ready for 8p PTM ADSL2(plus) and VDSL2 LT-level bonding 3 variants: NDLT-F/G and NDLS-E SLV LT variants SLV support POTS overlay Integrated MELT Integrated splitters Feature parity w/ NDLT-F NVLT-N NDLT-G NVLT-P NDLS-E NVLS-A

die Baugruppe für Gigabit Ethernet

ISAM FD P2P ETHERNET LT NELT Single slot 18 SFP/Dual Channel Compact SFP Cages Ethernet LT FD practice: 7302, 7330 and 7356 FD support Supporting 100M and/or 1000M Ethernet SFP/cSFP modules Backplane speed : Auto-sensing 1G / 2.5G / 10G (NANT-A/D/E) Support of SyncE Output on all ports User-to-Network (UNI) and Network-to-Network (NNI) port types UNI ports: Up to 2.5G bi-dir aggregate throughput per NELT-B Alignment with DSL & 16p P2P Fiber LT L2 forwarding, QoS & Multicast Support for LAG traffic protection Main application: User residential/smb services NNI Ports: Up to 2 x 10G bi-dir aggregate throughput per NELT-B Alignment with NT L2 forwarding with trusted QOS Support for LAG & MSTP traffic protection Main applications: Subtending, Business & wireless backhaul aggregation. High Density P2P Ethernet solution

NELT-B Target Applications and Port types recommended usage Reference Applications Residential Services Business Services (SOHO, SMB) UNI Port Type Up to 2.5G bi-dir aggregated throughput per NELT-B Avg Subs BW equivalent to GPON access solution with split 1:32 NELT-B UNI enables 100M or 1G Peak Subs BW Reference Applications NNI Port Type DSLAM Aggregation (Subtending) Business Services Transport Wireless Backhaul Up to 2 x 10G bi-dir aggregated throughput per NELT-B Ethernet/IP Aggregation NELT-B NNI port type focuses on Ethernet aggregation applications Features Parity with DSL for Residential/Business Services with UNI port type NNI port type allows for ISAM NELT-B positioning in new applications

NELT-B NELT-B Product Description 36 port Point-to-Point and Active Ethernet line card, delivering Fast Ethernet or Gigabit Ethernet services over point to point fibre. Features parity with DSL for residential services Additional features for Business and WBH Service forwarding models with QoS and Multicast alignment Flexible provisioning of FE/GE interfaces (2 x UNI, 1 x UNI + 1 x NNI, or 2 x NNI) LAG/LACP and MSTP are supported for links within a single LT Transparent and Participating Ethernet Service Recovery for protection and restoration of services End-to-End connectivy fault management Industrial hardened Key Features Customer Benefits P2P Ethernet for subscriber services and infrastructure/transport applications High density with dual-compact SFPs Scalable Ethernet P2P deployment with up to 1 Gbps bandwidth per port Increased backplane capacity with LT/NT load sharing SyncE support for mobile backhaul application Carrier-grade Ethernet services (MEF) support for Business Access Indoor/outdoor deployments across all ISAM FD family (7302, 7330 and 7356 FD support)

ISAM NELT-A 16p Fast Ethernet Line Card Key Features 16p optical Fast Ethernet Full ISAM Service Intelligence Full feature parity with DSL line cards for mixed deployments 100 Mb/s over 10 km with p2p single-mode fiber Indoor/outdoor deployments ISAM Family Strengths Scalability 16p line card for CO (7302) Cabinet (7330) Remotes (7356) Network processor per LT Distributed Intelligence Deployability Multi-stage IGMP Feature parity with DSL IGMP Proxy L2/L3 forwarding Same management Same forwarding Same security

die Baugruppe für GPON

Glasfaser bis ins Haus GPON (Gigabit Passive Optical Network) 2x100 Mbps Up to 20km with 28 db optical budget Fixed LL VoIP IPV CWDM HSI IP QoS GPON OLT Analog TV DVB TV RF PON split Up to 64 subs Dynamic allocation 2.5Gbps Ein-/Zweifamilienhäuser Mehrfamilienhäuser Dynamic allocation 1.25Gbps Kleinbetriebe V-OLT Optimale 3-play Unterstützung: Bandbreitenbudget von 2,44 Gbps down und 1,22 Gbps up (2:1) Dynamisch provisionierbare Bandbreite pro individuellem Teilnehmer Service >100 Mbps/TN Passive, kostensparende Infrastruktur (CAPEX und OPEX) Gleichermaßen für FTTB wie FTTH geeignet RF-Overlay erlaubt direkten Einstieg in TV-Services Einfache Migrationsmöglichkeit von FTTB H

PON Eigenschaften PON PON Passive Optical Network Verteilung läuft auf passiven optischen Splittern, nur die jeweiligen Enden sind mit aktiver Technik ausgestattet 3 Lichtwellen werden verwendet (Lambdas) 1490nm Downstream Übertragung 1310nm Upstream Übertragung 1550nm Downstream (Optional z.b. für RF-Overlay TV) Derzeitige Reichweite Max. 60 km, 20 km bei einem Splitter-Faktor von 1:32. Reichweite ist abhängig von der Leitungs- und Splitterdämpfung und dem WDM-Koppler (RF-Overlay) Max. Splitterfaktor 1:64 Teilnehmer Kein Splitter 1 Tln. @ 52,5 km 1:2 2 Tln. @ 45 km 1:4 4 Tln. @ 37.5 km 1:32 32 Tln. @ 20 km 1:64 64 Tln. @ 7.5 km

PON Verschiedene Modi für Downstream/Upstream Downstream-Richtung: TDM Time Division Multiplexing Daten werden von jedem ONT empfangen Zur Datensicherung wird AES Advanced Encryption Standard verwendet Upstream-Richtung: TDMA Time Division Multiple Access Burst-Mode Betrieb OLT steuert, welcher ONT als nächstes Zugang zum Upstram Rahmen erhält

Bandbreite bei GPON Entfernungsunabhängig (0-20km) Splitting Faktor Peak Peak downstream upstream Average Average downstream upstream 16 2,4 Gbps 1,2 Gbps 150 Mbps 75 Mbps 32 2,4 Gbps 1,2 Gbps 75 Mbps 37,5 Mbps 64 2,4 Gbps 1,2 Gbps 37,5 Mbps 19 Mbps downstream rate limiting Pro Kunde und Dienst

ISAM GPON Line card 1/2 NGLT-A Key Features 8 GPON ports 1:128 split, 40 km reach C+ optics (32 db link loss budget) or B+ (28 db link loss budget) Pluggable SFP RSSI capable optics OTDR ready via SFP swap IPTV and RF overlay PON feeder redundancy Industrial hardened for outdoor Deployment models: Business users, Residential users, Mobile Backhaul High-density 8-port GPON line card for mass-market FTTH/B deployments First GPON platform on market fully compliant with FSAN interop guidelines

ISAM GPON Line card 2/2 8 Port GPON Line Card (NGLT-A): Connectivity towards backplane = 2,5G/10G (NANT-D/NANT-E) Able to work in load sharing mode towards two NTs (2 x 10G backplane capacity with NANT-E) (available in R4.2.02) Similar L2/L3 capabilities as the standard 7302 FD LTs Extended dimensioning to support 8 GPON ports. Advanced Traffic Management: Enhanced downstream traffic management capabilities using specialized FPGA Hierarchical downstream scheduling and rate limiting

LT forwarding feature parity Features DSL LT NGLT-A IP+PPP auto-detect Future Multi-VLAN & VLAN translation vmac Future L2CP transparency VLAN-CC (C-VLAN, S+C-VLAN, S-VLAN modes) Enhanced i-bridge (incl. DHCP snooping, ARP relay and IP@ anti-spoofing) L2 DHCP relay PPPoE relay agent 802.1x Multicast (IGMPv2, IGMPv3 incl. SSM) Traffic marking & policing QoS session profile Traffic shaping (hierarchical scheduling : service, port, ONT) - 802.1ag Future

auf der Teilnehmerseite: ONTs

7302 ISAM Optical Network Terminations Portfolio Residential with FTTH Business Residential with FTTB The most comprehensive ONT portfolio in the market

Data-only ONT Residential with FTTH Characteristics I-010G-P I-020G-P Enclosure and size 14 x 10 x 3,5 cm 14 x 10 x 3,5 cm Power consumption 3W / 4W Benefits Troubleshooting and diagnosis Application Auto-negotiation and MDI/MDIX auto-sensing, multicast on GEM port, VLAN tag manipulation, classification and filtering RSSI I-040G-P 13 x 17 x 3,3 cm 3W / 5W 4,5W / 7W Auto-negotiation and MDI/MDIX auto-sensing, multicast on GEM port, VLAN tag manipulation, classification and filtering Auto-negotiation and MDI/MDIX auto-sensing, multicast on GEM port, VLAN tag manipulation, classification and filtering RSSI RSSI Residential users: single family home connected to Residential Gateway (RGW) Enterprise or corporate users: Fiber to the desktop

Data-only ONT: mini-ont (I-010G-S) Residential with FTTH I-010G-S indoor mini SFU ONT is costeffective and it has extremely small footprint. Supports 1GigE interface and compliant with standard OMCI definition Customers can easily maintain service demarcation points + Green design. Low power consumption Different mounting option. Can easily hide in a living room Works with standard RG available in the market Remotely managed by the Alcatel-Lucent 5520 AMS Network Management System Support of RSSI (Received Signal Strength Indication) for remote troubleshooting Two economical ways to deploy services over GPON : One approach is Smaller ONT + External RG

Business Indoor ONT Business Characteristics B-0404-A Enclosure and size H:25,32 cm W: 19,21 cm D: 4.18cm Power consumption 5.4W typical, 10W maximum Benefits Indoor ONT can be used on same PON as residential customers. E1 emulation using Circuit Emulation Service. Application Small businesses requiring voice and GigE connectivity Mobile backhaul of wireless traffic

VDSL2 MDUs Residential with FTTB Characteristics O-8881V-P Enclosure and size 410mm x300mm x160mm (H x W x D) Power consumption 35,2 W : 12,8W + 2W/channel VDSL + O-00240V-Q 3,5W per user typically 0,8W/channel act. POTS Benefits Application VDSL profiles 30a/17a; up to 100Mbps VDSL profiles 30a/17a; in-building or in- simultaneous TX/RX; completely silent, cabinet installation; sustained 100Mbps passively cooled; IGMPv2 and IGMPv3. per subscriber throughput, IGMPv2 and POTS = SIP or H.248 IGMPv3 Addresses customers in apartments and multi-tenant buildings in cost-effective way by reusing existing in-building copper

Netzmanagement

Einfache Bedienung und Provisionierung High performance management Service- und Teilnehmerprovisioning DSL Einheitliches Managementmodell Black Box bridge port und VLAN port modeling für QoS und forwarding configuration OLT + ONT werden als eine virtuelle Einheit vom System behandelt P2P GPON Einfachheit Kostenvorteile Kupfer oder FTTx: Service Procisionierung ist gleich! Keine internen GPONParameter zu Konfigurieren! Schnelle Serviceaktivierung Hoch effizient, keine manuellen Konfigurationen interner Parameter ReduzierterTrainingsaufwand Die Alcatel-Lucent ISAM Plattform ermöglicht schnelle und einfache Dienste-Bereitstellung

Managementsystem 5520 AMS High performance management Service- und Teilnehmerprovisioning DSL + Rechnerplattform Basislizenz ManagementSoftware + Lizenz + Lizenz pro Systemfamile P2P Lizenz Lizenz pro User + GPON Lizenz Lizenz pro Port

Verbesserte OSS/BSS-Integration und Prozesse Leverage existing OSS/BSS integration for AMS and operational support tools Streamline workflows High performance management OSS/BSS Integration (XML/SOAP based) 5520 AMS (Access Management System) Facilitate integration of service provisioning OSS to underlying access resources 5529 APC (Access Provisioning Center) Facilitate integration of service provisioning OSS to underlying access resources 5529 SDC (Statistics and Data Collector) Intelligent collection and dispatching of network data to performance and QoS applications 5529 OAD (OSS Alarm Dispatcher) Advanced interface for intelligent alarm forwarding to network wide alarm management OSS Same configuration tools Same CLI commands Same troubleshooting and diagnostics tools Network Analyzer for fiber Simplify FTTH introduction and streamline workflows

Kontaktieren Sie uns gerne für weitere Details t.ladewig@air-broadband.de M: +49 151 402 573 34