Pag. 1 / 5 Rio Saliceto, October 1st, 2010 No. 59b - 2010 New BUTLER CCD Wheel Aligners range Dear Butler Partner, During the last Automechanika Butler presented the new CDD wheel aligner range. Please take few minutes to read this INFO with various information on the Hardware and Software upgrade in comparison to our existing CCD wheel aligner range. - Hardware features: New measuring heads for all range with: aluminium casing mems inclinometers with no moving parts (high resistant to shocks). 20 reading Old calibration frames can still be used and the new Bluetooth sensors will not need to be cable connected to perform calibration.
Pag. 2 / 5 - Software features: Modern, beautiful design The new software allows easier tracing of the vehicles in the database and smoother database update. Run-out on push compensation is now possible also with 30 wheel rotation only. - 3 New models We introduce 3 new models at the existing range: Speedliner8050 WS 8CCD sensors, Bluetooth transmission upper range version. Speedliner6080 WS 8CCD sensors, Bluetooth transmission basic version in our 8 sensor Bluetooth range. Speedliner6040 WD 4CCD sensors, Cable transmission basic version.
Pag. 3 / 5 The new Speedliner 8050WS The price of all models in thenew range includes: - STDA33EU four-point clamps (clamping 10-24 ) - turn-tables (S110A7) With possibility to order 3 point quick-clamps (STDA35E clamping 10-24 ) on request.
Pag. 4 / 5 The new aligners are now available for delivery. Please refer to the following prices after asking your BUTLER Sales Area Manager for the new discount structure. Previous discount structures does not apply. SPEEDLINER9080WS SPEEDLINER8050WS SPEEDLINER7080WS SPEEDLINER7060WS SPEEDLINER6080WS SPEEDLINER6080WD SPEEDLINER6060WD SPEEDLINER6040WD monitor 22" 16/9 premium cabinet monitor 22" 16/9 6-CCD sensor wheel alignment, with infra-red transmission 6-CCD sensor wheel alignment, with infra-red transmission 4-CCD sensor wheel alignment, with infra-red transmission 13.800,00 12.330,00 11.540,00 10.600,00 10.630,00 9.120,00 8.050,00 6.830,00
Pag. 5 / 5 Above models include 2 sets of STDA33EU four point clamps (one set on Speedliner 6040WD) and 1 pair of S110A7 turntables STDA35E/S 2 sets of quick clamps STDA35E instead of STDA33EU 1.530,00 (only available for SPEEDLINER7060WS and higher) Note: WD = WIRED - WS = WIRELESS New brochures are being edited and will be sent soon. Please contact your Sales Area Manager for further details. Mailing List You can be deleted from BUTLER mailing list at any time by writing an e-mail to: info@butler.it In case you wish to add a colleague, just send the e-mail address along with name, surname, company and language spoken. They will be included in the next issue. Please do not hesitate to contact our Sales Office should you need any further clarification or assistance. Best Regards, Butler Team