1 185 WESTBOURNE GROVE LONDON W11 2SB APPLICATION FOR ADVERTISEMENT CONSENT Our Ref: CA/2916 AUGUST 2015 Principal: Carolyn Apcar BA Hons. MRTPI Kinetic House Theobald Street Borehamwood Hertfordshire WD6 4PJ Tel: 020 8387 1387 Fax: 020 8387 1386 E-mail: enquiries@apcarsmithplanning.co.uk
Subject Premises The premises lie on the southern side of Westbourne Grove, in the midst of a terrace of commercial properties between Ledbury Road to the west and Westbourne Grove Mews to the east. No. s 171 to 205 (odds) within this parade have retail or other A Class uses at ground floor level with three floors of accommodation on the upper floors (residential and/or offices). The ground floor units have varied shop fronts, most with separate entrance doors to the upper parts. Some of the shop fronts, such as that currently existing at the application premises are fully glazed; others have low level stall risers. The shop fronts and signage are fairly simple in their design, painted a variety of colours but predominantly white and shades of grey. The signage includes a variety of projecting hanging/box signs. Existing Signage There are two elements to the existing signage a fascia sign positioned centrally above the shop front and a projecting sign. These were approved in 2012 (LPA Ref: CA/12/01561). They involved silver grey letters on a white background. Proposed Signage The proposed signage is similar in its nature. The main differences are that rather than being silver grey lettering on white background they involve black lettering on the white background. The name of the incoming occupier, American Vintage, is proposed to be positioned towards the left hand side of the fascia. The size of the lettering will be proportionate to the fascia. The lettering will be matt black painted wood, 180cm in total width, 37cm in total height and with a depth/projection of 8mm. Above this a discreet white profile LED light is proposed (152cm in width, 1cm in height and 3cm deep). Details of this LED light are attached. The proposed projecting sign will be in the same position on the building as the existing projecting sign. It will be a discreet projecting box with a white background to match the shop front and black lettering to match the fascia signage. Full details are shown on Drwg No.14. The sign is as small as it can be to accommodate the name of the shop. If the same style of lettering were to be used as on the fascia sign a larger box would be required. Policy Assessment The signage is simple in terms of both its content (merely referring to the name of the occupier) and its design (involving black lettering on a white background). Size of lettering is in keeping with the shop front and the fascia as well as neighbouring properties.
The projecting sign is also limited to the name of the shop. As the guidance requires there is only one projecting sign and it will be located below the level of the first floor window cill. The projecting sign co-ordinates with the colour scheme of the overall shop front design. The illumination of the fascia sign is external and very discreet with a neat appearance, appropriate to the simplicity of the shop front itself and the street scene. The intensity of illumination will allow the sign to be read but will be low level and not cause any distracting glare.
F6.209.15 Viabizzuno product name nome prodotto designer and year progettista e anno c3 led mario nanni 2007 F6.209.15 c3 led diffused silver mat (1520mm - 59-13/16 in) c3 led diffused argento opaco (1520mm - 59-13/16 in) specifications / caratteristiche type of source white led 3000K tipo di sorgente type of installation tipo di installazione weight peso (Kg) material materiale treatment / colour trattamento/colore IP protection grade grado protezione IP led bianco 3000K ceiling, wall plafone, parete 0.21 aluminium alluminio anodised mat silver anodizzato argento opaco IP20 labelling marcature overall dimensions dimensioni d'ingombro (mm) 1520x30x10 c3 led mario nanni 2007 optics-diffusers / ottiche-diffusori light output diffused, direct emissione luce diffuser finish and material materiale e finitura del diffusore diffusa, diretta polycarbonate - frosted policarbonato - sabbiato lamps / lampade power potenza (W) colour rendering index indice di resa cromatica (Ra) 22,5 80 modular system for interiors IP20 in matt silver or white oxidized extruded aluminium in led with metacrylate diffuser. length varies (620mm, 920mm, 1220mm, 1520mm) according to power. available in different colors: 3000K or rgb. power supply unit not included. hollow profile also available. for the version with white leds it is also possible to use hollow profiles measuring 3011mm and wire them with a 6000mm long strip led coil: 13W/m Ra95 1150lm/m, 12W/m Ra80 1200lm/m, 6W/m Ra80 600lm/m 2700/3000/4000/5000K, while for the rgb led version, there is a 6000mm long strip led coil with power of 14W/m, sectionable every 98mm, both powered at a voltage of 24Vdc. corpo illuminante a sistema mudulare per interni IP20 in alluminio estruso ossidato argento opaco o bianco completo di sorgente led e matacrilato diffondente. la lunghezza dei moduli (620mm, 920mm, 1220mm, 1520mm) varia a seconda della potenza e sono disponibili in diverse gradazioni di colore: 3000K e rgb. l'alimentatore non è fornito. disponibile anche il profilo vuoto. per la versione con le bianchi è inoltre possibile utilizzare profili vuoti di lunghezza 3011mm e cablarli con bobina strip led: 13W/m Ra95 1150lm/m, 12W/m Ra80 1200lm/m, 6W/m Ra80 600lm/m 2700/3000/4000/5000K di lunghezza 6000mm. mentre per la versione led rgb è disponibile una bobina strep led di lunghezza 6000mm con potenza 14W/m sezionabile ogni 98mm entrambe alimentate con una tesione di 24Vdc. luminous flux flusso luminoso (lm) luminous efficacy efficienza luminosa (lm/w) 1269 electrical specifications / caratteristiche elettriche supply voltage tensione di alimentazione (V) dimmable dimmerabile insulation class classe di isolamento notes / note 94 24Vdc dimensions in inches:59-13/16 x 1-3/16 x 6/16 with proper control gear: constant voltage driver not included con apposito alimentatore: tensione costante non incluso
Viabizzuno dimensioni in pollici:59-13/16 x 1-3/16 x 6/16 accessories / accessori F6.209.90 matt silver profilo vuoto con coperchio argento opaco F9.209.90 pair of linear joints c3 coppia giunti lineari c3 F9.209.98 pair of caps matt silver coppia di tappi di chiusura argento opaco