Prevent ATASTROPHI Water Damage! With Watts
Table of ontents Product Page General Information...................................... - Faucet onnectors....................................... 4-5 Toilet onnectors.......................................... 6 Washing Machine onnectors................................ 7 Dishwasher onnectors..................................... 8 Ice Maker onnectors...................................... 9 2
General Information Watts is pleased to introduce its new line of FloodSafe Auto- Shutoff onnectors. The FloodSafe s patented design protects against catastrophic water damage caused by burst, broken or ruptured water supply hoses and fittings. FloodSafe connectors include a standard braided stainless steel flexible hose and a FloodSafe shutoff device located on the inlet. Problem In recent years, losses due to water and mold damage to residential and commercial buildings have been steadily on the rise. Water supply hoses are vulnerable to a number of potential problems. Over time, hoses can become brittle and burst. Poorly manufactured hoses can break under normal pressure conditions and hoses used in public venues are highly vulnerable to tampering by vandals. All of these conditions can lead to a flood of problems for homeowners, property managers and maintenance personnel. Water Damage is not a pretty picture! Solution Watts FloodSafe auto-shutoff connectors protect against catastrophic water damage by automatically shutting off the water supply to plumbing fixtures/appliances if excess water flow is sensed. Water flow through the FloodSafe device is limited to a factory preset flow rate, any flow over the preset rate will automatically shutoff all flow of water through the device. FloodSafe Shutoff Device Fact A Burst Washing Machine Hose can Discharge 500 Gallons of Water in One Hour. Braided Stainless Steel onnector
General Information Features Only economical and secure safeguard against catastrophic water damage available on the market Patented design No mechanical moving parts during normal operation, ensuring years of maintenance free operation Does not require electricity, batteries or any other source of power Maintenance free, should debris get caught in the FloodSafe s strainer, simply remove the connector, tap the in the palm of your hand to dislodge debris, then reconnect NSF and IAPMO Listed Installs between the stop valve and the fixture/appliance with the FloodSafe device located at the stop valve Faucet Inlet FloodSafe onnector FloodSafe Device Shutoff Valve Acts as a water conservation device, by shutting off the water to the faucet when the mandated flow restrictor is removed Available for faucets, toilets, ice makers, dishwashers and washing machines How it Works FloodSafe is actuated by flow of cold or hot water in excess of the design flow rate indicated on the label. Once a downstream flow of water in excess of the flow required by any standard fixture/appliance is detected, FloodSafe assumes a burst and the flow of water is shutoff. FloodSafe remains in the closed position until it is reset. FloodSafe Shutoff Device Resetting FloodSafe onnectors Resetting FloodSafe connectors if water flow has been stopped is easy. Simply follow the steps below: To Install: Braided Stainless Steel onnector. Turn off water supply at shutoff valve. 2. Remove old supply connector.. Install the connection with the FloodSafe device at the shutoff valve. Install the other of the connector to the faucet inlet. aution: Hand tighten the nuts plus 4" turn with a wrench. Do not overtighten. 4. Slowly turn on water at the shutoff valve to full open position. 5. heck for leaks. Important: Removing the faucet aerator or flow restrictor may cause the FloodSafe to activate shutting off flow to the faucet. heck for damage or rupture to the hose. Do not reactivate if a leak is evident. To reactivate flow of water to the fixture:. lose the shutoff valve to shut the water supply to the FloodSafe connector 2. Disconnect the FloodSafe at the shutoff valve. This will automatically reset the FloodSafe device.. Reconnect the FloodSafe according to installation instructions and turn on water supply to full open position. heck for leaks. 2
General Information End Fittings All Watts Flexible connectors feature improved fittings to make them Easier and Quicker to install: How to Order Flexible onnectors Example: FS-F-S-F /8" x /2" x 2" Product No FloodSafe Type of onnector: T = onnector, Toilet D = onnector, Dishwasher F = onnector, Faucet I = onnector, Icemaker WM = onnector, Washing Machine onstruction: S = Stainless Steel Braided Hose *Type of onnection from Supply: *Type of onnection to Fixture: onnector Size: From Supply X To Fixture X Length by adding ears to our ball cock fittings, we have made them easier to install and tighten. by Knurling the section on the bottom of our faucet connectors, we have made them easier for you to start and hand tighten the nuts. by using a Full Size Nut on the top portion of our faucet connectors, we have reduced the chance of wrench slippage. To help you choose the correct flexible connector for your particular application, we have diagrammed our ordering nomenclature below. Also, to speed your access to a particular connector of interest, we have provided a brief Table of ontents. *Definition for type of onnection: Size FS-F-S-F /8" x /2" x 2 onnection Type B = Ballcock End Fitting = End Fitting E = MIP Elbow End Fitting F = FIP End Fitting H = Female Hose End Fitting O = OD End Fitting T = Fine Thread FIP End Fitting
Faucet onnectors Series FS-F-S Braided Stainless Steel Faucet onnectors PV tubing jacketed with braided stainless steel. End fittings that are permanently attached with a superior hydraulic multi-crimp process. These connectors offer protection from vibration and bursting under extreme pressure surges which can occur in system piping. They also offer cost effective installation and are especially handy for difficult installations involving misalignment of piping or cramped locations. All hoses are NSF6 approved for safer drinking water. Max. Temperature 80 F/Max. Pressure 25psi No tube cutting or bing No soldering No extra adapters, fittings or couplings required 8" ---------------------- 2", 6", 20" --------------------- 8" Female iron pipe (FIP) 2" ---------------------- 2", 6", 20" --------------------- 2" 8" ---------------------- 2", 6", 20" --------------------- 2" 7 6" --------------------- 2", 6", 20" --------------------- 2" Female iron pipe (FIP) F Female iron pipe (FIP) Models FS-F-S- FS-F-S-F FS-F-S-FF FS-F-S-TF Both s of the flexible connector are supplied with plated solid brass nut compression fittings for connection to supply stop valves and faucets. One of the flexible connector is supplied with a plated, solid brass compression fitting for connection to a supply stop valve. The other is supplied with a plated, solid brass female iron pipe thread fitting. Both s of the flexible connector are supplied with a plated, solid brass female iron pipe thread fittings. One of the flexible connector is supplied with a plated, solid brass female iron pipe thread fitting. The other with a plated, solid brass fine thread female iron pipe fitting. F 2" ---------------------- 2", 6", 20" --------------------- 2" Fine thread female T F Female iron pipe (FIP) 2" ---------------------- 2", 6", 20" --------------------- 2" 8" ---------------------- 2", 6", 20" --------------------- 2" PRODUT ORDERING INDIVIDUAL NO. SIZE ODE WGT. (LBS.) FS-F-S- /8" x /8" x 2" 09220 0.25 FS-F-S- /8" x /8" x 6" 0922 0.28 FS-F-S- /8" x /8" x 20" 09222 0.2 FS-F-S-F /2" x /2" x 2" 0922 0.28 FS-F-S-F /2" x /2" x 6" 09224 0. FS-F-S-F /2" x /2" x 20" 09225 0.5 FS-F-S-F /8" x /2" x 2" 092200 0.27 FS-F-S-F /8" x /2" x 6" 09220 0. FS-F-S-F /8" x /2" x 20" 092202 0.4 FS-F-S-F 7 /6" x /2" x 2" 09226 0.26 FS-F-S-F 7 /6" x /2" x 6" 09227 0.0 FS-F-S-F 7 /6" x /2" x 20" 09228 0.4 FS-F-S-FF /2" x /2" x 2" 09229 0.2 FS-F-S-FF /2" x /2" x 6" 09220 0.6 FS-F-S-FF /2" x /2" x 20" 092204 0.9 FS-F-S-TF /2" x /2" x 2" 092240 0.28 FS-F-S-TF /2" x /2" x 6" 09224 0. FS-F-S-TF /2" x /2" x 20" 092242 0.5 FS-F-S-TF /8" x /2" x 2" 09224 0.27 FS-F-S-TF /8" x /2" x 6" 092244 0. FS-F-S-TF /8" x /2" x 20" 092245 0.4 F 4
Faucet onnectors Delta Style Braided Stainless Steel Faucet onnectors OD compression Max. Temperature 80 F/Max. Pressure 25psi Models: FS-F-S-O One of the flexible connector is supplied with a plated solid brass compression fitting for connection to a supply stop valve. The other is supplied with a plated, solid brass OD compression fitting. 8" ------------------------- 2", 20" ------------------------ 8" PRODUT ORDERING INDIVIDUAL NO. SIZE ODE WGT. (LBS.) FS-F-S-O /8" x /8" x 2" 092205 0.27 FS-F-S-O /8" x /8" x 20" 092246 0.4 O 5
Toilet onnectors Series FS-T-S Braided Stainless Steel Toilet onnectors Ballcock PV tubing jacketed with braided stainless steel and fittings that are permanently attached with a superior hydraulic multi-crimp process, these Watts flexible faucet connectors offer protection from vibration and bursting under extreme pressure surges which can occur in system piping. Max. Temperature 80 F/Max. Pressure 25psi Note: A minimum flow rate of 2.5 gallons per minute at the supply connection is required for proper shut off operation. (Typically 0 psi supply pressure meets this requirement.) Performance is accurate to the 80psi maximum system pressure as required by national plumbing codes. Models: FS-T-S-B FS-T-S-FB FS-T-S-TB One of the flexible connector is supplied with ballcock fitting. The other is supplied with a plated, solid brass compression fitting for connection to a supply stop valve. One of the flexible connector is supplied with a ballcock fitting. The other is supplied with a plated, solid brass female iron pipe thread fitting. One of the flexible connector is supplied with a ballcock fitting. The other is supplied with a solid brass fine thread female iron pipe fitting. 8" ----------------------- 6", 9", 2" ----------------------- 7 8" 7 6" ----------------------- 6", 9", 2" ----------------------- 7 8" 2" -------------------------- 6", 9" ------------------------- 7 8" Female iron pipe (FIP) F PRODUT ORDERING INDIVIDUAL NO. SIZE ODE WGT. (LBS.) FS-T-S-B /8" x 7 /8" x 6" 092247 0.28 FS-T-S-B /8" x 7 /8" x 9" 092248 0.22 FS-T-S-B /8" x 7 /8" x 2" 092206 0.25 FS-T-S-B 7 /6" x 7 /8" x 6" 092249 0.9 FS-T-S-B 7 /6" x 7 /8" x 9" 092250 0.22 FS-T-S-B 7 /6" x 7 /8" x 2" 09225 0.24 FS-T-S-B /2" x 7 /8" x 6" 092252 0.20 FS-T-S-B /2" x 7 /8" x 9" 09225 0.2 FS-T-S-FB /2" x 7 /8" x 6" 092254 0.24 FS-T-S-FB /2" x 7 /8" x 9" 092255 0.27 FS-T-S-FB /2" x 7 /8" x 2" 092207 0.0 FS-T-S-TB /8" x 7 /8" x 6" 092256 0.20 FS-T-S-TB /8" x 7 /8" x 9" 092257 0.22 FS-T-S-TB /8" x 7 /8" x 2" 092258 0.25 FS-T-S-TB /2" x 7 /8" x 6" 092259 0.20 FS-T-S-TB /2" x 7 /8" x 9" 092260 0.2 FS-T-S-TB /2" x 7 /8" x 2" 09226 0.26 B Ballcock 2" ----------------------- 6", 9", 2" ----------------------- 7 8" Fine thread female T Ballcock 8" ----------------------- 6", 9", 2" ----------------------- 7 8" 2" ----------------------- 6", 9", 2" ----------------------- 7 8" B B 6
Washing Machine onnectors Series FS-WM-S Braided Stainless Steel Washing Machine onnectors Hose Bibb Hose Bibb Made of PV tubing jacketed with braided stainless steel. The fittings are permanently attached with a superior hydraulic multi-crimp process. These connectors provide full flow capacity and offer protection from vibration and bursting under the extreme pressure surges, which can occur during normal operation of washing machine solenoid valves. Max. Temperature 80 F/Max. Pressure 25psi Note: A minimum flow rate of 2.5 gallons per minute at the supply connection is required for proper shut off operation. (Typically 0 psi supply pressure meets this requirement.) Performance is accurate to the 80psi Maximum system pressure as required by national plumbing codes. H 4" ---------------------- 48", 60", 72" --------------------- 4" PRODUT ORDERING INDIVIDUAL NO. SIZE ODE WGT. (LBS.) FS-WM-S-HH /4" x /4" x 48" 092262 0.76 FS-WM-S-HH /4" x /4" x 60" 092208 0.90 FS-WM-S-HH /4" x /4" x 72" 092209.04 H Models: FS-WM-S-HH Supplied with standard brass female hose bibb fittings at each of the flexible connector. 7
Dishwasher onnectors Series FS-D-S Braided Stainless Steel Dishwasher onnectors Male iron pipe elbow Made of PV tubing, jacketed with braided stainless, steel these connectors provide full flow capacity and offer protection from vibration and bursting under extreme pressure surges which can occur during normal operation of dishwasher solenoid valves. They provide cost effective installation, and since all models are supplied with an elbow fitting, you will not arrive at the jobsite without the proper fitting. Max. Temperature 80 F/Max. Pressure 25psi 8" ---------------------- 48", 60", 72" --------------------- 8" Female iron pipe (FIP) E Male iron pipe elbow Models: FS-D-S-E FS-D-S-FE Supplied with a plated, solid brass nut compression fittings at both s of the flexible connector and a brass male iron pipe thread elbow fitting. Supplied with a plated, solid brass nut female iron pipe thread connector at one of the flexible connector and a brass male iron pipe thread elbow fitting attached to compression fitting at the other of the flexible connector. F 2" ---------------------- 48", 60", 72" --------------------- 8" PRODUT ORDERING INDIVIDUAL NO. SIZE ODE WGT. (LBS.) FS-D-S-E /8" x /8" x 48" 09222 0.66 FS-D-S-E /8" x /8" x 60" 09226 0.76 FS-D-S-E /8" x /8" x 72" 092264 0.87 FS-D-S-FE /2" x /8" x 48" 092265 0.70 FS-D-S-FE /2" x /8" x 60" 092266 0.8 FS-D-S-FE /2" x /8" x 72" 092267 0.92 E 8
Ice Maker onnectors Series FS-I-S Braided Stainless Steel Ice Maker onnectors All reinforced PV tubing with a polyseter knitted reinforcement lay and a protective PV outer layer and fittings that are permanently attached with a superior hydraulic multi-crimp process, these connectors provide reliable protection against vibration and bursting under extreme pressure surges. Their flexibility also facilitates the slide in/slide out moving of a refrigerator without danger of permanent damage from kinked copper tubing. Max. Temperature 40 F / Max. Pressure 25psi (See note below). Models: FS-I-S All models are supplied with solid brass compression fittings. 4" ----------------------- 6', 0', 20' ---------------------- 4" PRODUT ORDERING INDIVIDUAL NO. SIZE ODE WGT. (LBS.) FS-I-S /4" x /4" x 6' 09220 0.80 FS-I-S /4" x /4" x 0' 0922.40 FS-I-S /4" x /4" x 20' 092268 2.50 NOTE: National residential plumbing codes reference the maximum operating temperature as 40 F (60 ). Plumbing fixtures are designed to ANSI--ASME A2 8. at 25psi. 9
For Technical Assistance all Your Authorized Watts Agent. Telephone # Fax # HEADQUARTERS: Watts Regulator ompany 85 hestnut St., North Andover, MA 0845-6098 U.S.A. 978 688-8 978 794-848 North East Mid Atlantic Edwards, Platt & Deely, Inc. 27 Royal Ave., Hawthorne, NJ 07506 97 427-2898 97 427-4246 Edwards, Platt & Deely, Inc. 68 Wyandanch Ave., North Babylon, NY 70 6 25-0600 6 25-00 W. P. Haney o., Inc. 5 Norfolk Ave., South Easton, MA 0275 508 28-200 508 28-85 WMS Sales, Inc. (Main office) 9580 ounty Rd., larence enter, NY 402 76 74-9575 76 74-480 J. B. O onnor ompany, Inc. P.O. Box 2927, Pittsburgh, PA 524 724 745-500 724 745-7420 RMI Glenfield Bus. tr., 255 Mechanicsville Tpk., Richmond, VA 222 804 64-755 804 64-780 The Joyce Agency, Inc. 8442 Alban Rd., Springfield, VA 2250 70 866-70 866-22 Vernon Bitzer Associates, Inc. 980 Thomas Drive, Warminster, PA 8974 25 44-7500 25 44-757 South East Billingsley & Associates, Inc. 2728 restview Ave., Kenner, LA 70062-4829 504 602-800 504 602-806 Billingsley & Associates, Inc. 478 heyenne Lane, Madison, MS 90 60 856-7565 60 856-890 Francisco J. Ortiz & o., Inc. harlyn Industrial Pk., Road 90 KM.9 - Lot #8, arolina, Puerto Rico 0098 787 769-0085 787 750-520 Mid-America Marketing, Inc. 20 Industrial Drive, Birmingham, AL 52 205 879-469 205 870-5027 Mid-America Marketing, Inc. 64 Foster Avenue, Nashville, TN 720 65 259-9944 65 259-5 Mid-America Marketing, Inc. 5466 Old Hwy. 78, Memphis, TN 88 90 795-0045 90 795-094 Smith & Stevenson o., Inc. 495 hastain Ave., harlotte, N 2827 704 525-88 704 525-6749 Harry Warren, Inc. 400 North Orange Blossom Trail, Orlando, FL 2804 407 84-927 407 84-9246 Watts Georgia 286-B Bankers Industrial Drive, Atlanta, GA 060 770 209-0 770 447-458 North entral South entral Dave Watson Associates 25 West Beecher, Adrian, MI 4922 57 26-8988 57 26-228 Disney McLane & Associates 428 McGregor Ave., incinnati, OH 45206 800 542-682 877 476-682 BWA ompany 760 S. Waterloo Rd., leveland, OH 449 26 486-00 26 486-2860 Mid-ontinent Marketing Services Ltd. 724 Armitage t., Addison, IL 600 60 95-2 60 95-067 Soderholm & Associates, Inc. 750 4rd Ave. N.W., Anoka, MN 550 76 427-965 76 427-5665 Stickler & Associates North 2 St., Milwaukee, WI 5226 44 77-0400 44 77-607 Hugh M. unningham, Inc. 755 Benchmark, Dallas, TX 7524 972 888-808 972 888-88 HM Sandia Group 755 Benchmark, Dallas, TX 7524 505 222-4 800 9-09 Mack Mclain & Associates 4407 Meramec Bottom, Suite G, St. Louis, MO 629 4 894-888 4 894-888 Mack Mclain & Associates, Inc. 450 NE 69th Place, Ste. 56 Ankeny, IA 5002 55 288-084 55 288-5049 Mack Mclain & Associates, Inc. 5090 West 6th St., Olathe, KS 66062 9 9-6677 9 9-958 OK! Sales, Inc. 24-A NE 2th., Moore, OK 760 405 794-5200 405 794-5250 Western Delco Sales, Inc. 90 Raymer Ave., Fullerton, A 928 74 888-2444 74 888-2448 Delco Sales, Inc. Sand Island Access Rd., Unit I-0, Honolulu, HI 9689 808 842-7900 808 842-9625 Fanning & Associates, Inc. 6765 Franklin St., Denver, O 80229-7 0 289-49 0 286-9069 Hollabaugh Brothers & Associates 695 South 94th St., Kent, WA 9802 25 867-5040 25 867-5055 Hollabaugh Brothers & Associates 028 S.E. 7th Ave., Portland, OR 97202 50 28-0 50 25-2824 P I R Sales, Inc. 050 North San Marcos Place, handler, AZ 85225 480 892-6000 480 892-6096 Preferred Sales 77 Wiegman Road, Hayward, A 94544 50 487-9755 50 476-595 R. E. Fitzpatrick Sales, Inc. 409 West Nike Dr. (8250 South), West Jordan, UT 84088 80 282-0700 80 282-0600 anada 0804 Watts Industries (anada) Inc. (Watts Regulator o. Division) 545 North Service Road, Burlington, Ontario L7L 5H7 905 2-4090 905 2-7068 on-ur West Marketing, Inc. 7B lipper Street, oquitlam, British olumbia VK 6X2 604 540-5088 604 540-5084 D.. Sales Ltd. #0-60 4th St. S.E., algary, Alberta T2H 2B6 40 25-6808 40 259-8 D.. Sales Ltd. 6726 Ave, Edmonton, Alberta T5M 2S6 780 496-9495 780 496-962 GTA Sales Team. Greater Toronto Area 888 208-8927 888 479-2887 Hydro-Mechanical Sales, Ltd. 700 Joseph Howe Drive, Suite, Halifax, Nova Scotia BL 4H7 902 44-2274 902 44-2275 Hydro-Mechanical Sales, Ltd. P.O. Box 445 (Mailing), 297 ollishaw St., Suite 7 (shipping) Moncton, New Brunswick E 9R2 506 859-07 506 859-2424 J.D.S. Sales Ltd. 4 Lancaster Street, St. John s, Newfoundland AA 5P7 709 579-577 709 579-558 Les Ent. Roland Lajoie 622 Marivaux, St-Leonard, Q HP H6 54 28-6645 54 28-6 Les Ent. Roland Lajoie 2 du Buisson, Pont Rouge, Q GH X9 48 87-2500 48 87-2505 Mar-Win Agencies, Ltd. lifton St., Winnipeg, Manitoba RE 2V 204 775-894 204 786-806 Northern Mechanical Sales P.O. Box 280 (mailing) 6 Pine St. (shipping), Garson, Ontario PL S6 705 69-275 705 69-494 Palser Enterprises, Ltd. P.O. Box 286 (mailing), 885 Blue Heron Dr., #4, London, Ontario N6H 5L9 59 47-982 59 47-049 RAM Mechanical Marketing Inc. 40 St. John Street, Regina, Saskatchewan S4R S5 06 525-986 06 525-0809 RAM Mechanical Marketing Inc. 50 Ave M South, Saskatoon, Saskatchewan S7M 2K9 06 244-6622 06 244-0807 Walmar Mechanical Sales 24 Gurdwara Rd., Nepean, Ontario K2E 8B5 6 225-9774 6 225-067 EXPORT Hdqtrs.: Watts Regulator o. 85 hestnut St., North Andover, MA 0845-6098 U.S.A. 978 688-8 978 794-848 Water Safety & Flow ontrol Products USA: 85 hestnut St., No. Andover, MA 0845-6098; www.watts.com anada: 545 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca F-FloodSafe 0625 Watts Regulator ompany, 2008