IV SUPPORTIVE EQUIPMENT CONTENTS 1. Filtroventilation devices 68 2. Welding gauges 71 3. Magnetic tools (mounting brackets) 72 67
www.most.com.pl 1. FILTROVENTILATION DEVICES MOSTAIR extraction arms MOST extraction arms have modern design and are made of high quality materials. They are easy to move over the welding place and keep set position. The suction nozzle complies with the EU standards on welding fumes extraction and provides excellent efficiency. The distinctive feature of MOST arms is their external support construction which provides natural and undisturbed air flow through the arm. The standard diameter is 160 mm, however, it is possible to change it and adjust to particular application. We deliver the complete arm ready to be mounted on the wall (the bracket in standard version) or outrigger. Accessible lengths:1,5, 2, 3, 4, 5, 7, and 9 m Arm MOSTAIR 1,5 m 71 40 010015 Arm MOSTAIR 2 m 71 40 010020 Arm MOSTAIR 3 m 71 40 010030 Arm MOSTAIR 4 m 71 40 010040 Arm MOSTAIR 5 m 71 40 010050 Arm MOSTAIR 7 m 71 40 010070 Arm MOSTAIR 9 m 71 40 010090 MOSTAIR MobiFlex - mobile device The unit, equipped with exchangeable filter element, is designed to extract and filter welding fumes and light grinding dust. This is an excellent solution for light applications. The unit has two levels of filtration. The first one is a spark arrester with a preliminary filter. The second one is a filter element of 14 m² surface and 99.9% efficiency. When the filter element is dirty, it should be replaced with a new one. MOBI-FLEX has compact construction and is easy to move around between workstations. The unit comes with the arm of 160 mm in diameter and lengths:1,5, 2 or 3m. MOBI-FLEX 230 V without arm 71 40 021001 MOBI-FLEX 400 V with FLF 1,5 m Ø160 mm arm 71 40 021074 MOBI-FLEX 400 V with FLF 2 m Ø160 mm arm 71 40 021002 MOBI-FLEX 400 V with FLF 3 m Ø160 mm arm 71 40 021003 Filter element - 14 m² 71 40 021160 Attachment for active carbon filter pack 71 40 021004 Active carbon filter pack (10 pcs.) 71 40 021005 Bracket for 2 arms Ø160 mm (max 3 m) 71 40 021086 MOSTAIR MF-ECO Jet-Pulse - mobile device MOSTAIR MF-ECO Jet-Pulse is a mobile extractor of welding fumes and dust with built-in filter and Jet-Pulse Clearing for cleaning the filter element. This is the economical unit for fumes and light dust whose filter is cleaned with compressed air. The fan with aluminium rotor provides over 1000 m³/h flow rate of extracted air. The efficiency of filter element is 99.9%. When the filter element is dirty, compressed air should be connected to the unit through the attached hose and cleaning process should be activated. Finally the dust container should be emptied. The unit is ready to use again. MOSTAIR MF-ECO Jet-Pulse has compact construction and is easy to move around between workstations. The unit comes with the arm of 160 mm in diameter and lengths: 2 or 3m. MF-ECO 230 V without arm 71 40 031540 MF-ECO 400 V without arm 71 40 031543 MF-ECO 400 V with FLF 2 m Ø160 mm arm 71 40 031002 MF-ECO 400 V with FLF 3 m Ø160 mm arm 71 40 031003 Exchangeable polyester cartridge 71 40 031541 Bracket for 2 arms- Ø160 mm (max 3 m) HEPA filter 71 40 031086 Hepa filter 7140031544 68 1. Filtroventilation devices Copyright RYWAL-RHC
ISO 9001 MOSTAIR WF-ECO Jet-Pulse - stationary device MOSTAIR WF-ECO Jet-Pulse is a stationary extractor of welding fumes and dust with a built-in filter and Jet-Pulse Clearing for cleaning the filter element. This is economical unit for fumes and light dust whose filter element is cleaned with compressed air. The fan with aluminium rotor provides over 1000 m³/h flow rate of extracted air. The unit is mounted on a wall and connected to the mains and compressed air. The unit must be hung at least 2.5m above the ground. The arm (lengths:1.5, 2, 3 m) is directly fitted to the unit. The efficiency of filter element is 99.9%. When the filter is dirty, cleaning process should be activated. After that the dust container should be emptied. The unit is ready to use again. MOSTAIR WF-ECO Jet-Pulse is an interesting alternative to central solutions. It has compact construction and low operating costs. WF-ECO 230 V without arm 71 40 041549 WF-ECO 400 V without arm 71 40 041547 WF-ECO 400 V with FLF 1,5 m Ø160 mm arm 71 40 041051 WF-ECO 400 V with FLF 2 m Ø160 mm arm 71 40 041052 WF-ECO 400 V with FLF 3 m Ø160 mm arm 71 40 041053 Exchangeable polyester cartridge 71 40 041541 Silencer 7140041552 HEPA filter element adapter 71 40 041553 HEPA filter element (23 m²) 71 40 041554 Possible to connect 2 arms MOSTAIR Wall-Flex- stationary device Practical device for extracting and filtering welding fumes and dust with an extracting arm. Thanks to high efficiency (99.9%) the filtered air may come back to the workshop without losing heat in wintertime. There are two levels of filtration. The preliminary filter collects impurities of bigger size and the exchangeable filter element collects fumes and small particles of dust. The exchange of the filter is easy and fast. The additional active carbon filter pack may be installed to eliminate harmful gases. MOSTAIR Wall-Flex is equipped with a wall bracket, a fan mounted in the upper part of the unit and extracting arm (1.5, 2, 3 m). The unit can be connected to a central ventilation system. MOSTAIR - welding-grinding benches Wall-Flex 230 V with filter element (14 m² ) without arm 71 40 051015 Wall-Flex 400 V with filter element (14 m²) without arm 71 40 051013 Wall-Flex 400 V with 1,5 m arm 71 40 051006 Wall-Flex 400 V with 2 m arm 71 40 051007 Wall-Flex 400 V with 2m arm 71 40 051008 Exchangeable filter element 14 m² 71 40 051060 Attachment for active carbon filter pack 71 40 051085 Active carbon filter pack (10 pcs) 71 40 051107 The unit (900x600 mm) is equipped with 6mm thick tabletop which is surrounded from 3 sides by stationary metal shield. Fumes and dust are extracted downwards through the tabletop with 2000 m³/h flow rate. Inside the housing there is filter element equipped with Jet-Pulse system and 1.1 kw fan with aluminium rotor. The pulsing system of cleaning filter element is activated from the table front. After cleaning the air is expelled to the workshop (the unit should not be used for aluminium grinding). In standard version the unit is equipped with a strong lamp to light the workplace and with a socket to plug in electric tools. In the table there is a bracket for welding clamp and an earthing terminal for welding unit. Under the grate there is an expansion chamber and water filters which collect bigger impurities and extinguishing sparks. The operating costs are reduced thanks to Jet-Pulse system which effectively cleans the filter element with compressed air. The process of cleaning the filter element is initiated from the front of the table. After each of such operation the container for impurities which is under the filter should be emptied. The table can be equipped with 125 mm high legs or wheels. MF-Grinder- 400 V grinding bench with legs 71 40 061566 MF-Grinder- 400 V grinding bench with wheels 71 40 061568 Filter element 71 40 061541 Copyright RYWAL-RHC 1. Filtroventilation devices 69
www.most.com.pl Central filter MOSTAIR TFK MOSTAIR units are a generation of standardized extractors of fumes and dust with flow rate from 2500 to 15000 m³/h. MOSTAIR units are perfect for creating extraction systems which include many welding workstations, extractors installed in benches for gas, plasma or laser cutting and other filtroventilation systems. MOSTAIR are produced according to EN ISO 15012 standards. Filtration units are compact thanks to built-in filter housing fan and control system. The housing is made of profiled panels. The horizontal placement of cartridge saves time during maintenance and replacement cartridges. Filtration unit is equipped with an automatic cartridge cleaning system PULSE JET operated with an easy-to-use controller. MOSTAIR TFK - applications: efficiency 2500 15 000 m³/h central filtroventilation system with individual extractors extractors from benches for gas, plasma and laser cutting filtroventilation of fumes and dust Advantagers of MOSTAIR TFK devices: highly efficient fans with low energy consumption factor spark arrester integrated with preliminary filter preventing from fire control system with digital display giving information on all working modes indicator on the housing informs when filter element replacement or maintenance is necessary easy access to all parts of the device through inspection doors fan has a standard sound-absorbing housing which lowers the noise level high quality filtration material (tested according to BGIA) fully automatic process of filter element clearing with small amount of compressed air lowers operating costs collected impurities are removed by means of a special container on wheels placed under device. Sample photo 70 1. Filtroventilation devices Copyright RYWAL-RHC
ISO 9001 2. WELDING GAUGES Controlling of readiness of welding parameter allows reducing the manufacturing costs thanks to proper assurance of welding parameters and high efficiency of filler metal. The gauges provide high accuracy of measurements: misalignment of internal edges of pipes and sheet metal the gap between pieces of sheet metal being welded symmetry of filled welds the throat of filled weld other weld parameters Characteristics: metric pitch small size, easy to operate made of stainless steel, which provides precision and reliability pitch resistant to external factors due to chemical treatment it is possible to calibrate gauges individually MOST-welding gauges MS 1 Bridge-cam gauge Measure acceptable weld reinforcement., determine the leg size of fillet weld, check the throat of filled weld, misalignment value, measure of undercut depth and weld gap, check the angle of metal sheet for beveling. Catalouge No. 70 42 000001 MS 2 Bridge-cam gauge Measure acceptable weld reinforcement, determine the leg size of a filled weld, check the throat of filled weld, misalignment value, measure of undercut depth and weld gap, check the angle of metal sheet for beveling. Catalouge No. 70 42 000002 MS 3 Bridge-cam gauge Measure acceptable weld reinforcement, determine the leg size of a filled weld, check the throat of filled weld, misalignment value, measure of undercut depth and weld gap, check the angle of metal sheet for beveling. Catalouge No. 70 42 000003 MS 4 HI-LO welding gauge Measure internal alignment of pipes after fit- -up/alignment, cut radiographic rejects, measure internal misalignment of pipe before and after tacking, check distance between tracing and weld after welding, measure acceptable weld reinforcement and weld gap. There is both inch and metric version available with pitches in 1/16 and 1.0 mm, check the angle of metal sheet for beveling. Catalouge No. 70 42 000004 MS 5 Bridge-cam gauge For detailed measurement of fillet weld and butt weld. Determine the leg size of fillet weld, measure acceptable convexity and concavity of fillet weld and weld reinforcement. Catalouge No. 70 42 000005 MS 7 Single purpose HI-LO welding gauge Measure internal alignments of metal sheet edges and the gap (distance) between sheets being welded, check the gap in the range between 1.0-4.0 mm, 1 mm increments), determine the root weld space, eliminate rejects improve productivity, both inch and metric version available. Catalouge No. 70 42 000007 MS 6 Bridge-cam gauge For detailed measurement of most popular fillet weld The gauge allows to measure welds between 1/8-1 (3.2-25.4 mm), both inch and metric version available. Catalouge No. 70 42 000006 Copyright RYWAL-RHC 2. Welding gauges 71
www.most.com.pl 3. MAGNETIC TOOLS (MOUNTING BRACKETS) Magnetic ground clamps Magnetic ground clamps MAGSWITCH easy and quick to set up in a convenient place. Provide clean work surface. Attache it to get started. Can be also used on pipes. 200 A 300 A 600 A Holding forc 26 kg 40 kg 89 kg Dimensions (LxWxH) 62 x 40 x 55 mm 57 x 40 x 69 mm 66 x 69 x 101 mm 0,1 kg 0,3 kg 0,8 kg 8100340 8100315 8100316 70 08 700340 70 08 700315 70 08 700316 Stays clean. Turn off Magswitch and wipe away debris. 8100316 No more tacking on tabs and searching for a ground location. 8100315 Fast set up. Grounds instantly 8100316 Strong grip on flat or round surfaces. Magnetic ground clamps MAGSQUARES Welders and fabricators are raving about all the uses, convenience and time savings with Magswitch MagSquares. MagSquares are extremely powerful on off magnetic blocks with strong holding force available on all sides. Welders have never enjoyed this complete control over incredibly strong magnets (1,000 lbs (454 kg) on the MagSquare 1000). You can precisely position the MagSquare and material, and then turn the magnet on. MagSquares feature multiplane workholding capability. It takes away the need for time consuming manual clamping on so many jobs, and works anywhere there is steel; you don t need and edge like you do with C-Clamps. All MagSquares are machined at 90 degrees, have pre-tapped holes on all sides for mounting tools, jigs and fixtures. Fast 180 degree turn of the knob turns the MagSquare on and off. When off, nothing sticks to them. Once you understand all the uses, the time savings in set ups, and the ability to control these powerful magnetic blocks you will want the entire range. Features: Incredibly strong Fast, precise positioning Mounts anywhere no limitations like clamps Magnetic grip on 5 sides Mounts to flat and pipe Pre-tapped holes on all sides for mounting Great for making your own fixtures MagSquares MagSquares 150 600 MagSquares 1000 67 kg 272 kg 454 kg Dimensions (LxWxH) 68 x 40 x 40 mm 109 x 56 x 75 mm 147 x 72 x 108 mm 0,2 kg 1,4 kg 3,5 kg 8100054 8100106 8100099 70 08 700054 70 08 700106 70 08 700099 8100238 8100106 8100054 Align two pieces of steel flat or round. Helping hand a temporary support to hold a part or tool on a vertical wall. Great for making your own fixtures Fabricate angles quickly; pull corners together with hold on multiple sides 8100099 Fast 90 degree angles 8100106 8100099 Use as a guide anywhere on a steel Secure steel for fabricating or cutting table. No limitations like clamps 72 3. Magnetic tools (mounting brackets) Copyright RYWAL-RHC
ISO 9001 Pivot Angle 200 Magswitch Pivot Angle offers a range of angles from 22 to 270 degrees. Each axis features a Magswitch with a 200 lbs (90kg) hold capability. A single pivot point is located on the elbow. The elbow joint locks and unlocks quickly with a lever. The dial on the elbow features indicators every 5 degrees. On each axis a Magswitch is exposed on a side to enable the tool to secure to a table or wall, while simultaneously holding the work piece. Perfect for repetitive work on uncommon angles. Odd angles in seconds Single locking lever on elbow for fast securing of your angle Pivot 200 90 kg Dimensions (LxWxH) Each magnet holds on two sides 1,6 kg Boomer Angles Magswitch BoomerAngles offer virtually unlimited angles. With a rotating MagSquare at the end of each axis. Magswitch BoomerAngles offers not only a fixed 90 degree angle on the inside and outside, but are adjustable to any angle in between. Featuring the benefits of Magswitch including incredible power and precision control, Magswitch BoomerAngles are easy to use, and can be used with larger and heavier steel. Boomer 600 67 kg 268 kg 197 x 140 x 197 mm 258 x 169 x 258 mm 8100090 Quick adjust lever for fast precise positioning. 8100090 Preset 90 degrees inside or outside. 70 08 700367 Boomer 150 Dimensions (LxWxH) 8100367 1,3 kg 4,4 kg 8100091 8100090 70 08 700091 70 08 700090 8100090 8100091 Holds flat and round perfect for working with pipe and fence set ups. Rotating Magswitches for virtually unlimited angles. Magswitch 90 degree Welding Angles Magswitch 90 degree Welding Angles are the most versatile in the market. Featuring the benefits of Magswitch including incredible power and precision control, the Magswitch 90 degree angles are easy to use, and can be used with larger and heavier steel. All Magswitch 90 degree angles allow you to reposition the magnets up or down on each axis (only vertical axis on #8100503), or reverse from outside to inside. Dimensions (LxWxH) 150 600 67 kg 268 kg 205 x 58 x 205 mm 288 x 104 x 288 mm 0,8 kg 3,7 kg 8100010 8100036 70 08 700010 70 08 700036 Degree angle indicator on elbow 240 x 91 x 240 mm 8100036 MagSquares can be repositioned or reversed on each axis Copyright RYWAL-RHC 180-degree turn of the knob turns magnet on and off. Add MagSquares on each axis for extra New 90 Degree Angle 1000 for heavy holding power fabrication work 3. Magnetic tools (mounting brackets) 73
ǁǁǁ ƌljǁăů ĞƵ ĂŬƚƵĂůŶĂ ŽĨĞƌƚĂ ŝ ƉƌŽŵŽĐũĞ ŶĂ www.most.com.pl Magswitch Magnetic Extenda-Lift With the Magswitch Magnetic Extenda-Lift, you can pick up and move steel without bending over and using your hands; offering convenience and safety advantages. You can pick up plate, pipe, or steel scrap off the floor with ease. Also works great for picking up hot, sharp or dirty steel without touching it. Extenda-Lift 600 has 600 lbs (272 kg) of hold force. Extenda-Lift 1000 has 1000 lbs (454 kg) of hold force. Ideal for cities and utilities. Valve box and small lid removal. Super strong hold. Dimensions (LxWxH) Picks up flat or round shapes. Extendalift 600 Extendalift 1000 272 kg 454 kg 724 x 68 x 117 mm 724 x 107 x 122 mm 2,4 kg 4,4 kg 8100025 8100177 70 08 700025 70 08 700177 No need to bend over and pickup materials. Hand Lifter 60-M (Manual) Add safety and convenience to every workstation. The Magswitch Manual Hand Lifter 60-M lets you pick, place, slide and reposition steel without using your fingers. No need to touch hot, sharp, or dirty steel. Ideal for small steel handling, dragging sheet, picking, placing and pulling parts out of burn table or handling scrap. Pivot handle allows use as a hand lifter or a sheet dragger. 60-M Dimensions (LxWxH) Hand lifter for all your small steel handling needs Handle options: fixed vertically or pivot. 106 kg 140 x 120 x 60 mm 0,6 kg 8100359 70 08 700359 Hand Lifter 60-CE (Cordless Electric) The world s first Cordless Electric Hand Lifter! The Hand Lifter 60-CE is a must for every metal fab shop. The Cordless Electric Hand Lifter is ideal for pulling parts out of a burn table, picking up steel to place on a work table, in a fixture, or handling scrap parts. Push button on/off control. Ideal for fast repetitive lifting. Cordless Electric rechargeable battery with charger (includes 2 batteries). 60-CE Dimensions (LxWxH) PPerfect for removing parts and cut outs from burn tables. Faster and safer handling of steel 74 Pipe groove for transporting pipe. 3. Magnetic tools (mounting brackets) 106 kg 209 x 173 x 75 mm 1,1 kg 8100385 70 08 100385 Copyright RYWAL-RHC
ISO 9001 Sheet Aligning Tools Magswitch offers two solutions that yield incredible time savings. The Mag Pry features 1,100 lbs (500kg) of hold force instantly! Using magnetic force and leverage, the tool aligns the sheets! The Sheet Handler operates on the same principal, but for large sheets. The Sheet Handler offers up to 1,800 lbs (818kg) of hold force, and features an extendable handle. Eliminates welded bars and wedges 8100361 Center Sheet Handler over the seam, turn Magswitch on, press to align and tack. Align sheets in seconds MagPry Sheet Handler complete with magnet 498 kg 816 kg Dimensions (LxWxH) 508 x 143 x 160 mm 1539 x 234 x 203 mm 4,3 kg 9,6 kg 8100081 8100361 70 08 700081 70 08 810361 Mag-Utility Hooks The perfect helping hand. Magswitch Mag-Utility Hooks let you hang tools, lights, support wires, air hoses, ground lines and more, right where you need them, quickly and easily. Ideal for keeping hoses and lines off the floor for a safer work environment. Mag-Utility Hooks are convenient and easily move from job to job. Hak 25 Hak 40 11 kg 18 kg Dimensions (LxWxH) 89 x 40 x 47 mm 103 x 69 x 69 mm 0,2 kg 0,8 kg 8100012 8100006 70 08 700012 70 08 700006 8100036 Save time by keeping parts or tools within reach 8100036 Attaches to flat or round surfaces Safety: keep your job site or shop clear of trip hazards Hang tools, nuts or bolts near your work area Safety: keep your job site or shop clear of trip hazards Copyright RYWAL-RHC 3. Magnetic tools (mounting brackets) 75