BACKUP & RECOVERY ARCHIVE REPLICATION RESOURCE MANAGEMENT SEARCH Key Benefits Consolidates data over thin WAN connections and expedites local recovery Eliminates tape management at multiple locations by centralizing remote office protection CommVault Simpana Replication Software Optimized Data Protection and Recovery for Datacenter or Remote/Branch Office Environments Improve protection, efficiency and simplify management by leveraging a central infrastructure of backup software, devices and trained personnel Meet Recovery Point and Recovery Time Objectives (RPO/RTO) by leveraging continuous data protection and multiple recovery points Eliminates the risk of application corruption by recovering your file or application to a specific pointin-time Optimizes security, protection and WAN utilization with encryption, compression, bandwidth throttling and discrete replication Increases reliability and speed of recovery with a local online backup copy and embedded deduplication for more retention and faster restore Eliminates exposure from site disaster, costly off-site tape storage and lowers TCO by replicating to physical or virtual sites for disaster recovery Easily add capabilities for protection, archive, and snapshot recovery, all managed from the same Unified Console. The Business Challenge All corporate data within your infrastructure requires protection, security, availability and is subject to compliance requirements regardless of where it resides. The lack of a consolidated data protection and recovery strategy for all the data in your enterprise can impact service levels, threaten business continuity and increase operational cost. Exponential data growth, limited bandwidth, resources, budgets and protection options impede your ability to meet backup windows, ensure protection and expedite recovery. As data spreads to remote sites at the edge of your infrastructure it becomes increasingly difficult to access primary data and move it efficiently among disk systems, sites and operating platforms. As the costs of managing and storing data continues to rise in parallel with exponential data growth, businesses must look for cost-effective solutions that consolidate administration, increase data availability, improve use of storage, network and resources and expedite disaster recovery. CommVault Simpana Solution CommVault Simpana Replication software delivers comprehensive reliable data protection for Windows, Linux and UNIX environments. A unified architecture that integrates backup and recovery, replication, archive and storage resource management makes Data Replicator the ideal solution to consolidate remote and branch office backup operations or deploy cost effective disaster recovery. With CommVault software you can continuously replicate data to meet recovery point and recovery time objectives or you can replicate on a scheduled basis to optimize the use of available bandwidth. Whether you choose to perform backups at the remote site for local restore or to centralize backup operations over a WAN for distributed protection, CommVault Simpana Replication software enables you to create secondary copies of production data quickly, efficiently and cost-effectively, using a combination of host-based replication and snapshot technologies. These secondary copies of data can be immediately accessed for rapid recovery, be used to create multiple recovery points or to perform traditional backups without impacting server performance. Data encryption, compression, bandwidth throttling and scheduled replication ensure data protection and optimize the use of available network bandwidth. Remote and Branch Office Protection Options Centralize Remote Office Data Protection Over a WAN Managing remote office data has traditionally been expensive and problematic. Maintaining backup software and infrastructure in remote offices is costly; distracting remote office personnel with backup and tape rotation tasks is disruptive; paying an offsite services company to drive to each remote office and collect tapes is costly and inefficient. What if instead of protecting data remotely you could centralize it and protect it with your data center infrastructure? CommVault Simpana Replication software enables you to cost-effectively centralize remote office backup and recovery of Windows, Linux and UNIX data. By using a single infrastructure of
Key Capabilities Replicated Remote Office Backup Allows for a deduplicated backup at the remote site which is then replicated over to a central data site for secondary processing, DR and long term archiving without impacting the remote systems Continuous Data Replication Allows disaster recovery copies of backup/archive data to be created over the LAN or WAN on a continuous basis. Discrete Data Replication Allows disaster recovery copies of backup/archive data to be created over the LAN or WAN on a scheduled basis Scheduled Bandwidth Throttling Optimizes available network resources by allowing administrators to match replication needs to available bandwidth. Unique Application Recovery Points Captures point-intime snapshot-based images of replicated data and offers special application integration for Microsoft Exchange, SQL Server and Oracle data. This maintains application integrity and provides consistent recovery images behind the replica. Easy, Centralized Management of Operations Provides the industry s only Single Pane of Glass graphical user interface from which to easily create, track, administer and manage replication along with backup, recovery and archive using a single policy engine. backup software and devices, CommVault lets you efficiently leverage a single trained team of backup and recovery specialists and provide a central collection point for tape rotation. CommVault Simpana software ensures data coherency, recovery and ease-of-management. The simple configuration of replication pairs makes it easy to establish a fan-in, many-to-one configuration, where multiple remote office locations replicate to a central location. This centralized approach helps reduce costs and increases the reliability of backup and recovery operations. CommVault Simpana Software enables the centralization of Remote Office Data over a WAN using Continuous Capture Replication or Discrete Data Synchronization. Scenario 1: Continuous Capture Replication CommVault Simpana Replication software provides continuous data protection by capturing data written by a server, onto an attached disk (internal or external) in real time. Any disk that is mountable by the server can be seen and protected with CommVault software. The software duplicates the I/O stream as it is written to the disk, and then sends the data as fast as possible across the network to a second server system. Continuous data protection can also be leveraged in a Windows based clustered environment for easy fail-over. CommVault Replication idata Agent is also deployed on the second server to capture the replicated I/O stream and then to apply that I/O stream to a duplicate copy of the data. This creates an up-to-date replica. CommVault software inserts consistency markers in the replication log to enable the creation of application-consistent recovery point snapshots at the destination. CommVault Replication software can maintain and dial back to multiple point-in-time snapshots for fast application recovery. Scenario 2: Discrete Data Synchronization Remote offices often need to maintain local backups for fast recovery. They also need to create a disaster recovery copy of the backup at a central site. Since creating this copy over the WAN is usually not possible due to limited bandwidth, businesses are forced to ship tapes
resulting in tape management and data security challenges. CommVault Simpana software addresses these challenges by combining the power of global data deduplication with data replication. This eliminates redundant data from remote office backups and reduces backup footprint. The deduplicated data is replicated to the central site in compressed format making it possible to create a disaster recovery copy over a WAN with limited bandwidth. Furthermore, the disaster recovery copy can then used for local and remote restore as well as secondary processing such as encryption and vaulting to offsite tape, without impacting remote systems. With CommVault Replication software, encryption and compression can be enabled during the data transfer over the WAN for additional security without impacting the size of the deduplicated data being transferred. Enhance Disaster Recovery Moving data offsite is the accepted method for ensuring recovery following a site disaster or outage. However, you are only as good as your last backup and sometimes losing the data that has changed since the last backup can materially disrupt your business. What if you could protect your company s critical data with a second copy that is current, up-tothe-instant of the disaster, rather than your last backup? With CommVault Replication software, you can leverage real-time replication to create a second copy of your data at another location as it is written to disk at the production site. In the event of a site outage, you have a second copy of your data online, current up-to-the-instant of the disaster and immediately available for use. CommVault software s real-time replication of data can be deployed in a one-to-many configuration. This gives maximum flexibility to leverage other remote or virtual sites for disaster recovery. Unify Management and Reporting Introduction of new applications and system management tools into an organization requires careful planning and often leads to lengthy efforts to justify the cost and time associated with learning, deploying and managing new software. What if rather than needing to manage yet another point product you could have a single management interface and seamless integration between data replication and backup software? The foundation of CommVault Simpana software is the Common Technology Platform which provides common services for all data management applications in the suite. This enables you to run replication and backup using the same interface and leveraging the same backend hardware. This expands functionality and allows businesses to leverage existing skill sets. For example, you can use CommVault Backup and Recovery software to make backup copies off of replicas or snapshot-based Recovery Points. Since Simpana software modules all use the same policy engine, the CommVault Backup and Recovery software can restore backup copies directly to the original source. Maintain the Integrity of Your Applications The continued success of most enterprises relies on the integrity of data stored in database and e- mail servers. Unforeseen events like power surges, hardware failures and network outages can easily interrupt the transfer of data in your organization and leave you guessing as to the state of your critical data. What if you didn t have to guess at the state of the replicated data because consistency points were embedded in the replication stream? CommVault Simpana software maintains the integrity of your application data for Microsoft Exchange, SQL Server and Oracle data by creating consistent Recovery Points. It marks the replication stream at points that are known good states. CommVault software leverages these consistency points to create application-consistent point-in-time snapshots (recovery points). Recovery Point snapshots provide an additional layer of protection against viruses and corruption, enabling you to restore Microsoft Exchange, SQL Server and Oracle databases with confidence. nage, SQL Server a databases with confidence.nabling you to restore Microsoft Exchange, SQL Server and Oracle databases with confidence.
Integrate Data Management and Protection Remote office backup whether performed locally or over a WAN is only the first step in a comprehensive data protection strategy. Once copied to a secondary host, your data needs to be protected and managed through its lifecycle. All Simpana software modules are fully integrated this enables you to leverage the backup module to automatically create backup sets of replicas at scheduled intervals based on policies you define. Additionally, when used in conjunction with the CommVault Data Archiver module, you can efficiently recover migrated remote office data without requiring offline files to be recalled. Maintain Uninterrupted Data Consistency When protecting data over wide area networks, network link failures can and will happen. The ability to gracefully recover from link failure is a key factor in protecting your remote office data. When links do fail, many data protection solutions require the administrator to perform manual comparisons of source and destination copy to determine what data was modified during the network outage. What if you could reduce your recovery time from days or hours to minutes and eliminate data loss and user impact? CommVault Simpana Software improves recovery times and helps meet stringent recovery point objectives. Real-time replicas and Recovery Point snapshots allow you to quickly and reliably recover remote Windows, Linux and UNIX file system data as well as Microsoft Exchange, SQL Server and Oracle databases. Both replicas and Recovery Points can be mounted for granular file selection and instant recovery without administrative assistance. And since they are inherently consistent with their applications, you can use them to make backup copies to any client system without impacting production systems or data. What if you could recover from network failures without performing manual data comparisons? CommVault Replication Software ensures that you can quickly return to a production state by carefully tracking all change activity during the network interruption and automatically bringing the replica up to a consistent state when network services are restored. CommVault products help you deliver the high service levels critical to maintaining business continuity. Improve RTO/RPO Service Levels When a virus attack or data corruption occurs, your current best option for recovery probably includes a restore process and depending on the size of your database, this may take hours and even days. In most environments, a lengthy recovery process and loss of data can disrupt business operations and significantly impact the bottom line. upt business opons and significantly impact the bottom line.erations and significantly impact the bottom line.
Key Features and Benefits Features Centralized policy management, control and reporting Integrated backup Application Recovery Points Replicated Remote Office Backup Remote Office Backup with Client Site Deduplication Discrete Data Replication Continuous Data Replication Smart synchronization Source client browse Hardware-independent Mountable snapshots One-to-one / one-to-many / many-to-one local or remote configuration Point-and-click reporting Out-of-band initial mirror creation Bandwidth throttling Compression Encryption VSS Integration Mounting Recovery Points Microsoft Cluster support Benefits Simplify configuration and administration. Manage global environment from a single web console or a lightweight Java graphical user interface. Seamlessly leverage backup/archive copy policies for easy administration and management. Protect Microsoft Exchange (2000, 2003, 2007), SQL Server (2000 and 2005) and Windowsbased Oracle applications against corruption or viruses by leveraging space efficient, copy-onwrite, point-in-time snapshots. Allows for a deduplicated backup at the remote site which is then replicated over to a central data site for secondary processing, DR and long term archiving without impacting the remote systems Enables the creation of an inline backup with deduplication to provide a local dedupe recovery copy at the remote site while simultaneously transferring only changed data over a WAN to create a second copy for disaster recovery. Allows disaster recovery copies of backup/archive data to be created over the LAN or WAN on a scheduled basis. Allows disaster recovery copies of backup/archive data to be created over the LAN or WAN on a continuous basis. Expedite re-sync after of your replica following a network outage, without the overhead of hefty check-sum or other network intensive comparisons between the source and target. Browse backup set from the original client to simplify restore and configuration in complex environments. Recovery Point Snapshots are independent of storage hardware allowing you to leverage your existing storage assets. Enable read-only end-user browse and restore of individual files. Facilitate centralization of data, disaster recovery and rapid disaster recovery management leveraging both fan-in and fan-out scenarios. Track all your data protection operations throughout the lifecycle of the data from one central UI for easy management. Eliminate the need to replicate large initial datasets over the network. Move data to the central location and sync it up later per your replication requirement. Use manual or scheduled bandwidth throttling to match replication needs to available network bandwidth. Reduce network traffic and expedite replication process. Protect critical corporate data from exposure when replicating over unsecured network connections. Speed recovery of Windows 2003 Server, Exchange Server, or SQL Server data by leveraging Microsoft Volume Shadow Copy Service integration to create snapshots or recovery points. Eliminate need to consume a system drive letter by mapping multiple Recovery Points to a mount point. Increase data availability and expedite recovery by replicating data within a Windows-based clustered environment for easy failover.
Additional Solutions to Use with CommVault Simpana Software CommVault Simpana software offers a singular suite of data management software built on the same software platform so that all capabilities work together. This makes it easy to add capabilities when and how you need them. To add on to CommVault Simpana software for host-based replication, consider: Backup Archive Replication Search Object-level backup and recovery of file systems, applications, databases and virtual server systems. Reliable operation with failover resume and job completion capabilities. Reduced cost and growth of primary storage systems. Legal discovery and compliance readiness. Remote office data centralization as a seamless extension of Backup. Disaster Recovery flexibility. Information Access and ediscovery of Electronically Stored Information (ESI). Simplify, speed and reduce the cost of enterprise-wide discovery from a single console. Resource Management Analysis of primary storage growth requirements. Analysis of secondary storage growth requirements. SnapBackup "Near Instant" snapshot backups across heterogeneous systems and storage. Eliminates backup impact on production servers. Virtual Server Data Protection Flexible backup and recovery options for VMware and Microsoft virtual platforms. Agent-less backup of virtual Machines. Remote Office and Branch Office Data Protection Leverage multiple options for protecting remote office data based on RTO/RPO and recovery SLAs. Optimize disk and network utilization with client-site deduplication. Workstation Backup and Recovery Solution Centralizes data protection to data residing at the edge on end user desktops and laptops. Ensures preservation of end-user files and data in efficient, searchable, long-term archives. Data Deduplication Reduced costs and recovery time with optimized dedupe across all backup and archive data stores. Expand use of dedupe capabilities to tape-based storage combined with fast, direct recoveries.
System Requirements Applications Supported Platforms Microsoft Exchange Server, Microsoft SQL Server and Oracle (Windows only). Other application data fully supported without recovery points. AIX, Microsoft Windows, Red Hat and SuSE Linux. Microsoft Clustering and 64-bit platforms supported. Note: System Requirements are subject to change. For up-to-date System Requirements, please refer to product documentation on the CommVault website at http://www.commvault.com CommVault Simpana Backup & Recovery, Archive, Replication, Resource Management and Search software is designed to work together seamlessly from the ground up, sharing a single code and common function set. This exclusive single-platform architecture enables unparalleled software efficiency, performance and reliability for unprecedented control over data growth, costs and risk. www.commvault.com n 888.746.3849 n E-mail: info@commvault.com CommVault Worldwide Headquarters n 2 Crescent Place n Oceanport, NJ 07757 n 888-746-3849 n Fax: 732-870-4525 CommVault Regional Offices: United States n Europe n Middle East & Africa n Asia-Pacific n Latin America & Caribbean n Canada n India n Oceania 1999-2009 CommVault Systems, Inc. All rights reserved. CommVault, CommVault and logo, the CV logo, CommVault Systems, Solving Forward, SIM, Singular Information Management, Simpana, CommVault Galaxy, Unified Data Management, QiNetix, Quick Recovery, QR, CommNet, GridStor, Vault Tracker, InnerVault, QuickSnap, QSnap, Recovery Director, CommServe, CommCell and ROMS are trademarks or registered trademarks of CommVault Systems, Inc. All other third party brands, products, service names, trademarks, or registered service marks are the property of and used to identify the products or services of their respective owners. All specifications are subject to change without notice.