30 Series Exit Device
Table of Contents Features, Applications and UL Fire Door Ratings... 1 3727/ NB3727 Vertical Rod Type Exit Device... 2 3828 Rim Type Exit Device...3 30 Series Trims....4 Alternate Strikes and Shim Kits...5 Mullions and Door Kits...6 Mechanical & Cylinder Options... 7-8 Cylinder Options...8 Ordering Information, Rail Sizes & Finishes... 9 Architectural Specifications and How To Order...10 On The Cover SARGENT 3828 Rim Exit Device with EN Finish
Features, Applications and UL Fire Door Ratings Applications Features Rugged exit device in surface vertical rod and rim designs Chassis mounted unit construction assures easy installation and maintenance Tapered push rail and angled covers Steel endcaps and covers Up to five functions with a variety of trim All exit devices meet ANSI/BHMA Standard 156.3, Grade 1 UL Listed UL Listed to Canadian safety standards Available as Fire Exit Hardware (12-) Single Door Vertical Rod Type 3727 / NB3727 Surface applied 2 / 1 point lock. Rim Type 3828 Surface application. Pairs of Doors with 980 Mullion Pairs of Doors without Mullion Vertical Rod Type 3727 / NB3727-2 Each Surface applied 2 / 1 point locking both doors. Each door active. Do not use an overlapping astragal. Pairs of Doors without Mullion Rim Type 3828-2 Each 980 Mullion - 1 Each Two independent active doors with full double door opening when required. Vertical Rod Type 3727 / NB3727-1 Each Rim Type 3828-1 Each Both devices are surface applied. A coordinator is required. Maximum Door Openings & UL Fire Door Ratings For available functions and outside trim, see charts for regular exit devices = Available Application & Type Single Doors Rim Type Pair of Doors Two Surface Mounted Vertical Rod Type - Swinging in same direction Two Rim Type with 12-980 Mullion Two Surface Mounted Vertical Rod Type -Swinging in opposite directions Regular Design 12-3828 *12-3727 x *12-3727 *12-NB3727 x *12-NB3727 12-3828 x 12-3828 12-3727 x 12-3727 12-NB3727 x 12-NB3727^ Maximum Door Opening 4'0" X 8'0" (1219mm X 2438mm) 8'0" X 8'0" (2438mm X 2438mm) 8'0" X 8'0" (2438mm X 2438mm) 8'0" X 8'0" (2438mm X 2438mm) UL Fire Door Rating Note: Please contact door manufacturer for specifications regarding fire door construction * Limited for fire doors listed by UL for this use. NFPA requires an astragal on 3 hour applications. Vertical rod application will not work with astragal. ^ Thermal pins required, 2 pins per set, 1 per door. Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings. (A) 3 Hour (B) 1 1/2 Hour (B) 1 1/2 Hour (D) 1/2 Hour (E) 3/4 Hour 1
3727 / NB3727 Vertical Rod Type Specifications For Doors Outside Trim Mounting Cover Chassis Rail Assembly End Cap Hand Latchbolt Strikes Dogging Feature Fire Exit Hardware See chart Page 1 Finish EB, ED, EN, EP, EAB 1-3/4" (44mm) thick standard. 3-3/4" (95mm) minimum stile width required for single door application. 3-1/2 (89mm) minimum stile width required for double door application. Standard AFF is 41". 28 Series Lever & Rose trims, GTB/HTB Pulls & Plates, OB Knob trims & Thumb Piece Trims Furnished standard with wood and machine screws Available with through bolts and mortise nuts Steel Nonferrous alloy Roll formed steel Steel Reversible. Device is packed standard LHRB Brass 646 Top Strike (Panic & Fire) 655 Bottom Strike (Fire) 624 Bottom Strike (Panic) Allen-type key furnished standard (Non Fire Rated Devices Only) The 3727/NB-3727 Multi-function SVR Exit Device is the perfect stocking device. 6 functions determined by trim selected Device & trim sold separately; easy to mix and match 4 available trim designs 2 Minimum Stile Requirements 3-1/2" (89mm) Minimum Stile Double Door with two vertical rod type exit devices 655 Bottom Strike (Fire Rated) 1-13/16" (46mm) Standard for 12- Stainless steel Black nylon coated 2-3/4" (70mm) 3/32" (2mm) Order as an 3727 followed by rail size, opening, AFF and finish 646 Top Strike Standard for both Panic & Fire (12-) Hardware with or without bottom rod Surface applied to frame Black nylon coated 624 Bottom Strike (Panic) 3/8" (10mm) 9/16" (14mm) 3/4" (19mm) 2-1/2" (64mm) 1-5/32" (29mm) Standard for 3727 Applied to surface of floor or to a flat threshold Black nylon coated 3-11/16" (94mm)
3828 Rim Type The 3828 Multi-function Rim Exit Device is the perfect stocking device. 7 functions determined by trim selected Device & trim sold separately; easy to mix and match 4 available trim designs Order as an 3828 followed by rail size and finish 649 Strike 1-5/32" (29mm) 3-11/16" (94mm) Surface applied Standard & Fire Rated Strikes are black nylon coated 3/4" (19mm) 1/4" (6mm) Specifications For Doors Outside Trim & Thumb Piece Trims Mounting Cover Chassis Rail Assembly End Cap Hand Latchbolt Strike Dogging Feature Fire Exit Hardware See chart Page 1 Finish EB, ED, EN, EP, EAB Minimum Stile Requirements Double Door 4-1/2" (114mm) Min. Stile Trim 1-3/4" (44) thick standard. 4-1/2" (114mm) minimum stile width required for single or double door application using standard 649 strike 28 Series Lever & Rose trims, GTB/HTB Pulls & Plates OB Knob trims Furnished standard with wood and machine screws Available with through bolts and mortise nuts Steel Nonferrous alloy Roll formed steel Steel Non handed Stainless steel 3/4" (19mm) throw 649 packed standard Allen-type key furnished standard (non fire rated devices only) Trim 649 Strike 980 Mullion Minimum Stile Requirements Single Door Trim 649 Strike 4-1/2" (114mm) Min. Stile 3
30 Series Trims The trim function determines the function of the exit device. All 28 Series trims work with all s, except where noted. Note: All trims and exit devices are ordered and packaged separately. 28 Series Lever & Rose Trim for 3727/3828 Series Exit Devices Lever & Rose Trim For 1-3/4" (44mm) doors only Functions available for 04, 06, 10, 13 & 15 Not handed Finishes: 03, 04, 10, 10B, 10BE, 20D & 26D Lever designs available: L, B, P To order specify 28 followed by the function (K, N, D, C or L), the rose (L), the lever (L, B or P) and finish Example: 28-K-LL x 26D 28-K-LL Night Latch Key in lever retracts latchbolt. 04 Function For 3828 only (ANSI 03) 28-N-LL Night Latch Lever operates only when key is in cylinder and turned. 06 Function (ANSI 09) 28-D-LL Dummy Lever rigid at all times & no outside function. 10 Function (ANSI 02) 28-C-LL Entrance Key in lever locks or unlocks lever. 13 Function (ANSI 08) 28-L-LL Passage Latchbolt operated by lever. No Cylinder 15 Function (ANSI 14) 28 Series GTB/HTB Pulls & Plates for 3727/3828 Series Exit Devices 810-GTB 802-GTB 814-HTB For 1-3/4" (44mm) doors standard Through-bolted with 3 mortise nuts Pulls project 1-1/2" (38mm) from door face GTB Design trim will cover a 161 cutout Trim ordered separately. Finishes: EN, EB, ED, EP & EAB For cylinder operation only with no trim (Specify 3828 x 34 rim cylinder x Finish) To order specify: trim design and finish Example: 814-HTB x EN 28 Series OB Knob Trim for 3727/3828 Series Exit Devices For 1-3/4 (44mm) doors only Functions available for 04, 13 and 15 Non-handed Finishes: 03, 04, 10, 10B, 10BE, 20D & 26D To order specify 28 followed by the function (K, C or L), the rose (O), the knob (B) and finish Example: 28-K-OB x 26D 4 28-K-OB Night Latch Key in knob retracts latchbolt. 3828 only 04 Function (ANSI 03) 814-HTB Night Latch Outside by pull and key. (3828 only) 04 Function (ANSI 03) 28-C-OB Entrance Key in knob locks or unlocks knob. 13 Function (ANSI 08) 28-L-OB Passage Latchbolts operated by knob. No Cylinder 15 Function (ANSI 14) 810-GTB Exit Only with Pull Outside pull when push bar is locked down. 10 Function (ANSI 02) To order specify: trim design and finish Example: 866-TP x EN 802-GTB Exit Only Blank plate to cover 161 cutout. 10 Function (ANSI 01) 28 Series Thumbpiece Trim for 3727/3828 Series Exit Devices 866-TP Key locks or unlocks thumbpiece. (63) Finishes: EN, EB, ED, EP & EAB * 1 3/4" Door Only 814-TP Key retracts latchbolt. (3828 ONLY) (04) 828-TP Thumbpiece always operable. (28) 810-TP Dummy trim. (10)
Alternate Strikes and Shim Kits Alternate Strikes 613 Strike (Alternative for 3828) 3-5/8" (92mm) Glass Bead Shim Kits 558 for 3828 and 12-3828 Exit Devices 559 for 3727 and 12-3727 Exit Devices Note: When ordering shim kits for exits with outside trim, spindle length, thumbpiece length and through bolt length must be increased accordingly. (2 pieces 1/8" shim supplied. 1/4" total.) Shims Shims Mounting Plate 1/4" (6mm) Half mortised. Nylon coating on face plate only. Minimum stile 4". When ordered separately, specify finish. 644 Strike (Alternative for 3828) 2" (50mm) Surface applied. For use on pair of doors without mullion. Specify outside finish when ordered separately. 642 Strike (Alternative for 3828) L 1 1/2" 5/8" (16mm) 7/16" (11mm) 3-5/8" (92mm) 1-1/2" (38mm) Full mortised Dimension L equals door thickness plus 1/2" (13mm). 653 Bottom Strike (Alternate for 12-3727) 2-3/4" (70mm) 2-7/16" (62mm) 2-5/16" (59mm) 1/2" (13mm) Available on order for 12-3727. For use with 1/2" (13mm) high threshold. Cut threshold to fit strike. Stainless steel. Furnished with expansion shields. Through Bolt (TB) Applications Door *Ordering Device Thickness Number 3727 1-3/4" (44mm) 28-2031 2-1/4" (57mm) 28-2032 12-3727 1-3/4" (44mm) 28-2078 2-1/4" (57mm) 28-2088 3828 & 1-3/4" (44mm) 28-2024 12-3828 2-1/4" (57mm) 28-2025 *Specify finish Through bolts and mortise nuts are furnished in a pack along with the appropriate instruction sheet for device ordered. To order through bolts and mortise nuts with an exit device, add suffix TB to trim pack. Example: 3727 x TB x EN Available finishes: EB, EN, ED, EAB To order through bolts and mortise nut packs separately, see chart above. Rod Replacement Kits Top Rod Bottom Product Kit ++ Rod Kit +++ 3700+ 672T 672B + Finish Information Required ++ Door Height & Rail Location Required +++ Rail Location Required 5
Mullions and Door Kits 980 Removable Mullion 980 Extruded Aluminum (prime coat) 980A Aluminum (US28) Consists of: Mullion 511 Top Retainer 502 Bottom Retainer 96" (2438mm) stock size; 120" (3000mm) available 1-1/2" (38mm) 2-1/2" (63mm) 1-1/4" (32mm) 507 6 3" (76mm) Soffit Door 511 502 507 Adapter for Narrow Transom Bars Available with 980 and 980A Required when soffit is 1-1/4" (32mm) to 2" (51mm) wide 19/32" (15mm) Top Retainer Mullion Body 12-980 Mullion (96" maximum) For 12-3828 2" x 3" Channel Iron. Malleable iron top and bottom retainers. 96" (2438mm) stock size; 120" (3000mm) available 120" Mullions do not carry UL fire label Top Retainer Shim Kit - 601 Top Retainer 98-2190 Bottom Retainer 98-2191 543 Stock Hollow Metal Door Kit Note: For complete Listing of available mullions, see the 80 Series Catalog Kit consists of a 649 Strike Shim, a 161F Lock Front Filler, and a 86S Strike Filler for applying a 3828 Series Exit Device on doors prepared with Fed. Type 161 cutouts, and frames prepared for ANSI A115-2 Strikes. The 649 strike shim is 1/8" (3mm) thick and is used to obtain the correct distance between the exit device case and the 649 surface applied strike, when the stop is 1/2" (13mm) high. 649 Strike Shim 161 Lock Front Filler 86S Strike Filler L980 Lockable Mullion Aluminum Prime Coat Specify: L980A Anodized Aluminum Specify: L980A x10b for 313AN to match 10B Used for non fire rated applications 96" (2438mm) stock size 120" (3000mm) available Standard #41 cylinder (1-1/8") Cylinder options: Signature, XC-, Schlage Keyways SC- & SE- available Wall Mount Kit 98-2578 Top Ret Pack 98-2526 Bottom Ret Pack 98-2525 Cylinder Kit must be ordered separately (980C1) 12-L980 Lockable Mullion Steel Fire rated for 8'0" x 8'0" (2438mm x 2438mm) paired openings 96" (2438mm) Stock Size 120" (3000mm) (Non Fire Rated) available #41 cylinder standard Cylinder options: Signature, XC-, Schlage Keyways SC- & SE- available Top Retainer Shim Kit - 601 Cylinder Kit must be ordered separately (980C1) EL980 Electric Lockable Mullion Steel For use with monitor or electric strikes Quick-Connect wiring supplied 96" (2438mm) stock size 120" (3000mm) available Requires a #46 cylinder Top Retainer Shim Kit - 601 Not available in 12- option Cylinder Kit must be ordered separately (980C2) Mullion Accessories RK980 Latchbolt assembly retrofit kit with top and bottom retainers for 980 mullion Retainer Packs Product # Description 98-2526 Top Ret. pack for L980 98-2525 Bottom Ret. pack for L980 98-2558 Top Ret. pack for 12-L980 98-2556 Bottom Ret. pack for 12-L980 98-2559 Top Ret. pack for EL980
Mechanical & Cylinder Options Mechanical Options: Note: Mechanical Options are available for Exit Devices only Fire Rated 12- UL Fire Label Exit hardware (not available with 16- & HK-) Dogging Options 16- Cylinder Dogging (Non Fire Rated Devices Only) LD- Less Dogging (Non Fire Rated Devices Only) Electrical Options 55- Request to Exit - Signal Switch in Rail Top Rod Only NB- Less Bottom Rod (Available for 3727 Devices) Cylinder Options: Note: Cylinder Options are available for 16- Exit Devices and 04, 06 & 13 function trims Code Description SARGENT Degree Key System Level 1 (bump resistant with patented keys) Lever Trim Knob Trim GTB-HTG- Thumbpc Trim Rail - 16-Cyl Dogging X DG1-21- Degree Level 1 Construction Master Keying X DG1-60- Degree Level 1 Removable Disposable Construction Core DG1-63- Degree Level 1 Removable Core DG1-64- Degree Level 1 Removable Construction Keyed LFIC SARGENT Degree Key System Level 2 (geographically exclusive; bump and pick resistant) X Degree Key System Signature Key System DG2-21- Degree Level 2 Construction Master Keying X DG2-60- Degree Level 2 Removable Disposable Construction Core DG2-63- Degree Level 2 Removable Core DG2-64- Degree Level 2 Removable Construction Keyed LFIC DG1- DG2- DG3- SARGENT Degree Key System Level 3 (geographically exclusive; UL437 certified; bump and pick resistant) Note: For cylinder options not shown, please contact factory for availability Note: For V-10 Cylinders and information, contact ASSA X DG3-21- Degree Level 3 Construction Master Keying X DG3-60- Degree Level 3 Removable Disposable Construction Core DG3-63- Degree Level 3 Removable Core DG3-64- Degree Level 3 Removable Construction Keyed LFIC 10- SARGENT Signature Key System X 10-UL SARGENT Signature Key System meets UL437 requirements 10-21- SARGENT Signature Construction Key System (Lost Ball) X 10-63 SARGENT Signature LFIC (Removable Core) Cylinder X X 7
Cylinder Options Signature Key System 8 Code Description Lever Trim Knob Trim GTB-HTG- Thumbpc Trim Rail - 16-Cyl Dogging 11- XC Key System (not available with other key systems unless specified) X 11-21- XC- Construction Key System (Lost Ball) X 11-60 Hardware to accept XC- Permanent LFIC (Removable core), Disposable plastic Core- provided 11-63 Hardware provided with XC- LFIC (Removable core) Cylinder - (includes masterkeying, grand masterkeying) 11-64 Hardware provided with Keyed construction core to accept XC- LFIC (Removable) Permanent core (ordered separately) 11-70-7P Lock to accept XC- SFIC (7-Pin) XC- Permanent cores, plastic disposable core provided 11-72-7P Lock to accept XC- SFIC (7-Pin Keyed Construction core provided) cylinder Permanent core ordered separately 11-73-7P Lock supplied with XC- Small Format 7-Pin interchangeable core (includes masterkeying, grand masterkeying) 11-65-73-7P Lock provided to accept XC- Uncombinated 7-Pin SFIC (Permanent) core - (packed loose) Hardware to accept SARGENT Permanent LFIC (Removable core), 60 Disposable plastic core provided (Permanent cores ordered separately) 63 Hardware provided with LFIC (Removable core) Cylinder - (includes masterkeying, grand masterkeying) 64 Hardware provided with Keyed construction core to accept LFIC (Removable) Permanent core (ordered separately) 70 Lock to accept 6- or 7-Pin SFIC Permanent cores, plastic disposable core providec 72 Lock to accept 6- or 7-Pin SFIC (Keyed Construction core provided) Cylinder (Permanent core ordered separately) 73 Lock supplied with 6-Pin SFIC (includes masterkeying, grand masterkeying) 65-73 Lock provided to accept Uncombinated 6-Pin SFIC (Permanent) core - (packed loose for field keying) 75-73-7P Lock provided to accept Uncombinated 7-Pin SFIC (Permanent) core - (packed loose for field keying) 73-7P Lock supplied with Small Format 7-Pin Interchangeable core (includes masterkeying, grand masterkeying) 80 Lock to accept Keso and Keso F1 cylinders - no cylinders provided X X 81 Cyl to accept Keso and Keso F1 - Removable cores - no core provided X X 82 Lock provided with SARGENT Keso Security Cylinder X X F1-82 Lock provided with SARGENT Keso F1 Security Cylinder (Patented) X X 83 SARGENT Keso Security Removable Core Cylinder (for existing systems only) X X Schlage Keyways SC- Schlage C keyway cylinder, 0 bitted X 84 SARGENT Keso Security Removable Construction Core Cylinder X X SARGENT Lost Ball Construction Keying for Conventional, XC and 21- Construction Signature Series (N/A with 63- or 73-) X Key Systems SARGENT Construction Split Key System for Conventional Cylinders 22- (for existing systems only) (N/A with 10-, 11-, 63- or 73-) X Added Security BR- Bump Resistant Cylinder (Available with Conventional & Conventional XC Cylinders Only) X Less Cylinder LC- Less Cylinder X SE- Schlage E keyway cylinder, 0 bitted X SF- L Lever to accept Medeco KeyMark Large Format Interchangeable and Schlage Full Size Interchangeable Core (supplied less Cylinder, but with tailpiece needed) X Note: For cylinder options not shown, please contact factory for availability Note: For V-10 Cylinders and information, contact ASSA
Ordering Information, Rail Sizes & Finishes Check List for Ordering Indicate the following door and frame information: Single doors, or pair of doors with mullion, or pair of doors without mullion Door and frame material Dimensions: Door opening width Stile width Door thickness Stop height Example: Single Door x Hollow Metal Frame 36" x 5" x 2-1/4" x 1/2" If Vertical Rod Devices also indicate: Mounting height Door opening height Full Width of Door Threshold height If no threshold is used, so state Unless threshold information is indicated, exit device will be furnished for use without threshold Mullion stock size is 96" (2438mm); 120" (3000mm) available In ordering templates for hollow metal doors and/or frames, state job name on template order. Give template order number or template numbers on hardware order. Door Thickness Width of Stile 1/8" (3mm) Stock Rail Sizes Available E For doors 24" through 32" 61cm through 81cm F For doors 33" through 36" 82cm through 91cm J For doors 37" through 42" 94cm through 107cm G For doors 43" through 48" 109cm through 122cm Finishes available with Lever & Rose Trim and OB Knob Trim SARGENT Designation ANSI/BHMA Designation Finish Description 03 605 Bright brass, clear coated 04 606 Satin brass, clear coated 10 612 Satin bronze, clear coated 10B 613 Dark oxidized satin bronze, oil rubbed 10BE 613E Dark oxidized satin bronze, equivalent 20D 624 Statuary bronze dark powder coated 26D 626 Satin chromium plated Finishes available with Exit Devices, GTB Trims & Thumbpiece Trim SARGENT Designation ANSI/BHMA Designation Finish Description SARGENT Designation ANSI/BHMA Designation Finish Description EB 690 Sprayed bronze enamel or polyester powder coated to match finish 10B ED 693 Sprayed black enamel or polyester powder coated to match finish 20D EN 689 Sprayed aluminum enamel or polyester powder coated EP 691 Sprayed bronze enamel or polyester powder coated to match finish 10 EAB 696 Brass enamel or polyester powder coated to be used with brass finishes Door Opening Height door 1/4" (6mm) Left Hand Reverse Bevel LHRB Packaging Finished Floor Stop Height AFF** inside outside Right Hand Reverse Bevel RHRB Product Avg. WT Case Exit with trim 15 lbs. 1 ea 980 mullion 18 lbs. 1 ea 12-980 mullion 40 lbs. 1 ea ** AFF: Above Finish Floor or Threshold; Required information for 3727 Devices. Standard mounting height 41" (104mm) above finished floor to centerline of device or 38" (965mm) above finished floor to centerline of device for elementary schools. 9
Architectural Specifications & How To Order How to order 3727/3828 Multi-function Exit Devices: Specify the following for 3727 Devices: Options Series Rail Opening AFF Finish 11-NB- 3727 F 84" 41" EN Specify the following for 3828 Devices: Options Series Rail Finish 11-16- 3828 F EN All trims and functions listed on this page, work with 3727 & 3828 Exit Devices, except where noted Available Options listed on Page 7 How to order Trim for 3727 & 3828 Exit Devices (Exit Device Sold Separately) Example: 11-28-C-LL 26D Options Available Trim & Function Designation Available Finishes Available Lever & Rose Trim Lever & Rose Finishes Options 28-K-LL (04 Function) 28-C-LL (13 Function) 03 04 See Page 7 28-N-LL (06 Function) 28-L-LL (15 Function) 10 10B Suggested Architect s Specifications All exit devices shall be of touch bar design and be operative over 2/3 of the door s clear opening width All exit devices must be listed under Panic Hardware in the Accident Equipment List of Underwriter s Laboratories, Inc. Where labeled doors are used as exits, they must be equipped with labeled Fire Exit Hardware All springs shall be of stainless steel All exit devices shall be of chassis mounted unit construction with removable cover 10 28-D-LL (10 Function) 10BE 20D 26D GTB/HTB Trims & Pulls GTB/HTB Finishes 814-HTB (04 Function) EN EB 802-GTB (10 Function) Exit Only ED EP 810-GTB (10 Function) Pull EAB OB Knob Trim OB Knob Finish 28-K-OB (04 Function) 03 04 28-C-OB (13 Function) 10 10B 28-L-OB (15 Function) 10BE 20D 26D Thumbpiece Trim Thumbpiece Finishes 814-TP (04 Function) EN EB 810-TP (10 Function) ED EP 866-TP (63 Function) 828-TP (28 Function) EAB
SARGENT Manufacturing Company 100 Sargent Drive, New Haven, CT 06511 USA 800-727-5477 www.sargentlock.com Founded in the early 1800s, SARGENT is a market leader in locksets, cylinders, door closers, exit devices, electro-mechanical products and access control systems for new construction, renovation, and replacement applications. The company s customer base includes commercial construction, institutional, and industrial markets. ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.