Mini Cabinet Ideal for the small office/home environment Available with attractive black finish Lockable glass front door Cable access positioned in top and rear of unit Specifications Wall Mount Cabinet Finish Black powder coat to BS6496 Material Mild steel to BS1449 Width 300 mm Depth 350 mm Height 400 mm Door Smoked grey glass Capacity 8 units (8u) Shelf Finish Black powder coat to BS6496 Material Mild steel to BS1449 Width 10 (260 mm) Depth 140 mm Height 44mm Blank Panel 1u Finish Black powder coat to BS6496 Material Mild steel to BS1449 Width 10 (260 mm) Depth 10 mm Height 44 mm Blank Panel 2u Finish Black powder coat to BS6496 Material Mild steel to BS1449 Width 10 (260 mm) Depth 10 mm Height 88 mm Brush Strip Panel Finish Black powder coat to BS6496 Material Aluminium alloy 6063 HE9/50s to BS1474 Width 10 (260 mm) Depth 12 mm Height 44 mm The compact design of the Mini Cabinet makes it the ideal housing for small network requirements, allowing integration of voice, data, ISDN and internet connections in one neat unit. The cabinet has been designed to fit perfectly into both the office and home environment, and has an 8u capacity for the Office System range of 10 networking hardware and patching equipment. The cabinet has a smart black finish. The lockable smoked glass door enables easy patching from the front of the unit, and cable access points are situated in the top and back to assist installation. For maximum cable access the rear panel can be removed. There are added ventilation slots in both sides with a removable top plate to increase ventilation. An extensive range of cabinet accessories are available, including; shelves, blank panels, brush strip panels and data/voice panels. Bespoke panels can be offered on request. Mini Cabinet 8u RR-W3-8-P 10 Shelf 009-000-004-36 10 Blank Panel 1u 009-001-021-10 10 Blank Panel 2u 009-000-004-42 10 Brush Strip Panel 009-001-020-00 11.1 2016 Connectix E&OE Updated 22/01/2016
Server Cabinets Fully removable steel sides Design allows for maximum ventilation Lockable doors front and rear Adjustable 19 mounting profiles front and rear High quality paint finish (Black powder coat) 800 kg static load capacity Supplied fully assembled Server Cabinet 12u 600w x 1000d RR-F5-12-M Server Cabinet 18u 600w x 1000d RR-F5-18-M Server Cabinet 21u 600w x 1000d RR-F5-21-M Server Cabinet 24u 600w x 1000d RR-F5-24-M Server Cabinet 27u 600w x 1000d RR-F5-27-M Server Cabinet 39u 600w x 1000d RR-F5-39-M Server Cabinet 42u 600w x 1000d RR-F5-42-M Server Cabinet 45u 600w x 1000d RR-F5-45-M Server Cabinet 12u 800w x 1000d RR-F6-12-M Server Cabinet 18u 800w x 1000d RR-F6-18-M Server Cabinet 21u 800w x 1000d RR-F6-21-M Server Cabinet 24u 800w x 1000d RR-F6-24-M Server Cabinet 27u 800w x 1000d RR-F6-27-M Server Cabinet 39u 800w x 1000d RR-F6-39-M Server Cabinet 42u 800w x 1000d RR-F6-42-M Server Cabinet 45u 800w x 1000d RR-F6-45-M Racky Rax Server Cabinets have been designed to offer the optimum housing for servers and networking hardware. Mesh front and rear doors plus a vented roof add up to offer maximum ventilation. The cabinets are fitted with quick release front and rear perforated doors (approximately 60% open), fitted with lockable swing handles. The side panels can be fitted with cabinet locks. The large floor aperture gives maximum cable access, plus there is cabling access in the top. All apertures are fitted with blanking plates as standard. These 800 wide cabinets have additional cable access next to the rack profiles to allow easy routing of cables from the front to the rear of the cabinet. These Server Cabinets are available in various configurations and are supplied fully assembled on a pallet, but all cabinets can be easily dismantled if required. The high quality attractive black finish ensures the cabinet will complement high specification office environments. Conforms to the following standards Fixed Shelf 715 mm RR-S5 IEC 297-2, DIN 41494-7, DIN 41491-1, BS 5850/3192 11.2 2016 Connectix E&OE Updated 22/01/2016
Bespoke Co-location Data Centre Cabinets Heavy duty frame construction from 2mm steel with 1500kgs loading capacity Two pairs of fully adjustable 19 profiles with U numbers & with 1/4 & 1/2 Co-location fixings 2 x 300mm enclosed cable tray c/w access panels Large aperture in base 2 x brushed cable entry positions in roof at rear, one each side midway back 2 to 5 x Full width/depth shelfs c/w door bars to split cabinet into 4 x secure compartments 2 to 5 x Reinforced 80% mesh doors fitted front & rear, each section with its own key 2 x side panels Airflow kit fitted at front of cabinet to minimise airflow around the 19 posts Front & rear posts set back 130mm Doors earthed to cabinet 10 way 80A earth bar fitted at rear in base Baying kit supplied with each cabinet The Connectix Cabling Systems range of Data Centre Server Cabinets provide a flexible solution for data centre racks layouts. Design and built to the clients configuration, the cabinets are modular and use pre-loaded and retrospective compartment options for installation. This flexibility gives Data Centre Managers maximum use of space within cabinets, maximum revenues per U of rack and best environment optimisation of rack layout. DCS Co-location Cabinets include internal vertical cable management, a large access aperture in the base and brushed cable entry positions in the roof. The cabinets support 1500kgs loading capacity and are manufactured in the UK from heavy duty frame construction on 2mm steel. Supplied with reinforced mesh doors, they can be interchanged with solid steel or advanced IP-based locking systems. Multiple rack layouts are available, please speak to your sales person so we can design a solution to fit your requirements. 11.3 2016 Connectix E&OE Updated 22/01/2016
Bespoke Data Centre Server Cabinets Welded heavy duty frame construction Fully height adjustable 19 galvanised profiles fitted front & rear Single 75% mesh or Perspex door at front with twin wardrobe mesh at rear (both with key locks) Two full height lift off side panels complete with key locks 2-part brushed cable entry in roof Additional cable entry in top on both sides Large cable entry aperture in base 10 way 80 Amp earth bar fitted in base Cabinets fitted to pull out stabilising plinth 100 mm high 2 x 100 or 150 mm full height cable tray at rear 4 way roof mount fan tray Optional PDUs, baying kits, blanking plates and cable management available Notes Load rating to 1000 kg Fully removable doors and side panels Cabinet dimensions (inc castors) 42 U to 48 U high, 600 or 800 mm wide, 800 or 1000 mm deep All paint colours to BS 4800 Steel supplied to BS EN 10130:1999 DC01 Conforms to the following standards: IEC 297-2 DIN 41494-7 DIN 41491-1 BS 5850/3192 11.4 2016 Connectix E&OE Updated 22/01/2016
Floor Standing Cabinets Ventilated top Adjustable mounting posts Lockable Perspex front door Lockable and removable rear door Cable access in base 800 kg static load capacity Supplied fully assembled Floor Standing 12u 600w x 600d Floor Standing 18u 600w x 600d Floor Standing 21u 600w x 600d Floor Standing 24u 600w x 600d Floor Standing 27u 600w x 600d Floor Standing 39u 600w x 600d Floor Standing 42u 600w x 600d Floor Standing 12u 600w x 800d Floor Standing 18u 600w x 800d Floor Standing 24u 600w x 800d Floor Standing 27u 600w x 800d Floor Standing 39u 600w x 800d Floor Standing 42u 600w x 800d Floor Standing 21u 800w x 600d Floor Standing 27u 800w x 600d Floor Standing 42u 800w x 600d Floor Standing 27u 800w x 800d Floor Standing 27u 800w x 800d Floor Standing 42u 800w x 800d RR-F1-12-P RR-F1-18-P RR-F1-21-P RR-F1-24-P RR-F1-27-P RR-F1-39-P RR-F1-42-P RR-F2-12-P RR-F2-18-P RR-F2-24-P RR-F2-27-P RR-F2-39-P RR-F2-42-P RR-F3-21-P RR-F3-27-P RR-F3-42-P RR-F4-27-P RR-F4-27-P RR-F4-42-P The range of 19 Floor Standing Cabinets are an ideal solution for housing network hardware and patching equipment. The robust design makes them suitable for use in IT departments and offices. The cabinets are available in various configurations and are supplied fully assembled. Each cabinet utilises a ventilated top and four 19 adjustable front and rear mounting posts. The cabinets feature lift-off sides and a lockable door for maximum access to the internal equipment, with cable access in the base for convenient routing of network cables. The side panels can be fitted with cabinet locks. The cabinet frameworks are finished in black with a Perspex lockable front door. These 19 Floor Standing Cabinets incorporate the essential features for data communication environments - security, durable construction, easy access and protection from dust or contamination for the network equipment. Accessories A full range of cabinet accessories are available including; wall mounting frames, PDUs, fixed shelves, telescopic shelves, castors, cage nuts, baying kits, roof mounting fan units and plinths. See the cabinet accessories page. 11.5 2016 Connectix E&OE Updated 22/01/2016
Wall Mounting Cabinets Ventilated top Adjustable mounting posts Removable side panels Removable cable plates access in base and top Lockable glass front door Supplied fully assembled The compact design of the 19 Wall Mounting Cabinets make them ideal for smaller networks and workgroups. The cabinets are available in various sizes and are supplied fully assembled. Each cabinet comprises a welded steel frame and adjustable front and rear 19 mounting profiles. Cable access positions with removable plates are situated in the top and bottom of the cabinet. Specification Cable Access Holes 63 mm x 343 mm (1 top 1 bottom) Height (U) 6 9 12 15 18 21 The cabinets feature a ventilation slots in the top, have a lockable glass front door, and removable sides. The cabinet is finished in a high quality attractive black. Width (mm) Height (mm) 325 455 590 720 855 990 Depth (mm) Weight (kg) RR-W1 550 450 14 18 21 25 28 RR-W2 550 550 15 18 21 24 28 31 RR-W3 600 450 20 23 27 31 36 40 RR-W4 600 550 25 30 35 41 46 52 RR-W5 600 600 28 33 38 45 51 58 Wall Mounting Cabinet 6u 550 450 mm Wall Mounting Cabinet 9u 550 450 mm Wall Mounting Cabinet 12u 550 450 mm Wall Mounting Cabinet 15u 550 450 mm Wall Mounting Cabinet 18u 550 450 mm Wall Mounting Cabinet 6u 550 550 mm Wall Mounting Cabinet 9u 550 550 mm Wall Mounting Cabinet 12u 550 550 mm Wall Mounting Cabinet 15u 550 550 mm Wall Mounting Cabinet 18u 550 550 mm Wall Mounting Cabinet 21u 550 550 mm Wall Mounting Cabinet 6u 600 450 mm Wall Mounting Cabinet 9u 600 450 mm Wall Mounting Cabinet 12u 600 450 mm Wall Mounting Cabinet 15u 600 450 mm Wall Mounting Cabinet 18u 600 450 mm Wall Mounting Cabinet 21u 600 450 mm Wall Mounting Cabinet 6u 600 550 mm Wall Mounting Cabinet 9u 600 550 mm Wall Mounting Cabinet 12u 600 550 mm Wall Mounting Cabinet 15u 600 550 mm Wall Mounting Cabinet 18u 600 550 mm Wall Mounting Cabinet 21u 600 550 mm RR-W1-6-G RR-W1-9-G RR-W1-12-G RR-W1-15-G RR-W1-18-G RR-W2-6-G RR-W2-9-G RR-W2-12-G RR-W2-15-G RR-W2-18-G RR-W2-21-G RR-W3-6-G RR-W3-9-G RR-W3-12-G RR-W3-15-G RR-W3-18-G RR-W3-21-G RR-W4-6-G RR-W4-9-G RR-W4-12-G RR-W4-15-G RR-W4-18-G RR-W4-21-G Wall Mounting Cabinet 6u 600 600 mm RR-W5-6-G Wall Mounting Cabinet 9u 600 600 mm RR-W5-9-G Wall Mounting Cabinet 12u 600 600 mm RR-W5-12-G Wall Mounting Cabinet 15u 600 600 mm RR-W5-15-G Wall Mounting Cabinet 18u 600 600 mm RR-W5-18-G 11.6 Wall Mounting Cabinet 21u 600 600 mm RR-W5-21-G 2016 Connectix E&OE Updated 22/01/2016
High Density Patching Frame Strong welded steel construction Optional lockable front door and removable rear or side panels 3-way roof mounting fan unit available No sharp edges or tight corners (prevents over stressing of cables) Supplied fully assembled 42u High Density Patching Frame 009-000-052-43 42u Patching Frame Side Panel 009-000-052-50 42u Patching Frame Rear Door 009-000-052-51 42u Patching Frame Lockable Front Door 009-000-052-52 The High Density Patching Frame is a simple solution for housing 42 x 24 way patch panels. The frame is also suitable for the mounting of active equipment and the accommodation of standard power distribution units. The frame comes fully assembled and is of welded steel construction. It s designed to have no tight corners or sharp edges - the edges are radiused in key areas to prevent over stressing of cables. A 3-way roof mounting fan unit is available if additional cooling is required, as are optional lockable doors and removable rear or side panels. Patching frames can be installed separately, side by side, back to back or against a wall depending on available space and customer requirements. Accessories A full range of cabinet accessories are available including; PDUs, fixed shelves, telescopic shelves, cage nuts, roof mounting fan units and plinths. See the cabinet accessories page. 11.7 2016 Connectix E&OE Updated 22/01/2016
Wall Mounting Frames Ideal for installation sites where space is limited such as risers and shafts Standard finish black (other colours on request) Easy access to internal equipment Manufactured in the UK The 19 Wall Mounting Frames are an ideal alternative when a lockable cabinet isn t required. They are ideal for mounting patch panels and other shallow 19 rack mount equipment, and their lightweight construction means they can be mounted on virtually any wall. 1u 11 Wall Mounting Frame 50mm Deep 009-000-035-02 2u 19 Wall Mounting Frame 200mm Deep 009-000-032-02 3u 19 Wall Mounting Frame 200mm Deep 009-000-032-03 4u 19 Wall Mounting Frame 200mm Deep 009-000-032-04 6u 19 Wall Mounting Frame 200mm Deep 009-000-032-06 3u 19 Wall Mounting Frame 350mm Deep 009-000-034-03 6u 19 Wall Mounting Frame 350mm Deep 009-000-034-06 Accessories A full range of cabinet accessories are available including; PDUs, fixed shelves, telescopic shelves, castors, cage nuts, baying kits, roof mounting fan units and plinths. 11.8 2016 Connectix E&OE Updated 22/01/2016
Fibre Optic ODF Rack dimensions 430mm x 300mm ABS plastic structure (Plastic tray) Designed for easy installation Simple capacity expansion Adaptor set at 30 to ensure bend radius of patch cord is protected Perfect for fusion splicing Product Information Model / Ports Net Size (mm) Weight (kg) OPT-ODF-12 430x300x1u 3.5 OPT-ODF-24 430x300x2u 5.5 OPT-ODF-48 430x300x3u 8.0 OPT-ODF-72 430x300x4u 9.8 OPT-ODF-96 430x300x6u 15.0 The CCS range of ODFs provide optical connections for use in the data centre, large comms room, telecoms and CCTV applications. Available in a range of options; ST, SC and LC multimode and singlemode fibre variants, the ODFs include an internal splice tray for management and installation of optical fibres. 11.9 2016 Connectix E&OE Updated 22/01/2016
V1000 ODF Rack V1000 Rack - V1000 Rack 900mm x 300mm x 2200mm Rear Mount 19-46U 1008 Fibre Capacity using 42U (7 x 6U SC Modules) 6 x Additional adjustable Cable Management Mandrels Uprights c/w holes suitable for fitting cable break out units 5 x Adjustable cable management hoops Key lockable windowed doors, with the option of a coded lock for added security Side and rear panel removed from inside to stop unauthorised access Cable entry top and bottom CL100 Lock (optional) - 10 Button Keypad Codes 4 digits Multiple user code One time user code 15,000 opening 2 x AAA cells (supplied) Better failure override 9v battery across LED (+/-) master code Easy programming and code change IP54 Rated 11.10 2016 Connectix E&OE Updated 22/01/2016
V1000 ODF Rack Rear Mounted Pivoting Panels High Density Fibre Management Unique 12 fibre multi-function cassette Manufactured using GE Plastics UL94 V-0 rated CYCOLAC VW300 Can be supplied with Mandrel for a patching only option 6U Backplate holds 6 x rear mounted trays 4U Backplate holds 4 x rear mounted trays Each backplate has cable management mandrels Supplied in SC/LC, E2000 & FC/ST in both Singlemode and Multimode Rear Mounted Pivoting Panels For routing contained fibres/fire tubes to fibre management trays within the ODF system Securing and/or anchoring of CTM is also provided Composed of base, lid, compression gland, CTM clamp and Copex tubing Can accommodate cable with up to 4, 8 and 16 tubes Up to 32 tubes if using shared tubing 11.11 2016 Connectix E&OE Updated 22/01/2016
Accessories Caged Nuts and Bolts (50) RR-A1 Earth Bonding Kit (2) RR-A2 Cabinet Feet (4) RR-A3 Heavy Duty Castors 009-000-005-03 4 Ring Cable Management Bar RR-A6 Vertical Cable Management 18U Vertical Cable Management 27U Vertical Cable Management 39U Vertical Cable Management 42U RR-A5-18 RR-A5-27 RR-A5-39 RR-A5-42 2 Way Fan Tray RR-FT-2 (Compatible with 600 x 600 mm & 800 x 600 mm cabinets) 4 Way Fan Tray RR-FT-4 (Compatible with 800 x 600 mm, 800 x 800 mm & 800 x 1000 cabinets) The range of cabinet accessories complement the variety of floor standing and wall mounted cabinets. Combined together, these products offer a complete cable patching solution. Heavy duty castors can be fitted to raise the cabinet clear of the floor and allow the cabinet to be moved across even surfaces. Cage nuts are used to fix internal equipment into the cabinet. Earth bonding kits enable two cabinets to be joined together. Steel plinths fit beneath the cabinet to allow cable access from the base, sides and rear and are available in various widths and depths. Vertical Cable Management offers an ideal way to keep your cabling tidy and maximise airflow. 4 Way 1U Horizontal PDU RR-P1-4 6 Way Vertical PDU RR-P2-6 8 Way Vertical PDU RR-P2-8 10 Way Vertical PDU RR-P2-10 12 Way Vertical PDU RR-P2-12 10 Cabinet 4 Way 1U Horizontal PDU RR-P1-4-10 Plinth 600 x 600 mm Plinth 600 x 800 mm Plinth 800 x 800 mm Cantilevered Vented Shelf 1U 270 mm (Ideal for 450 mm wall cabinets) Cantilevered Vented Shelf 1U 300 mm (Ideal for 550 mm wall cabinets) Cantilevered Vented Shelf 1U 350 mm (Ideal for 600 mm wall cabinets) Fixed Vented Shelf 440 mm Fixed Vented Shelf 600 mm Fixed Vented Shelf 820 mm RR-PL-6060 RR-PL-6080 RR-PL-8080 RR-S0 RR-S1 RR-S2 RR-S3 RR-S4 RR-S5 11.12 2016 Connectix E&OE Updated 22/01/2016