NEW HOLLAND T4 T4.85 T4.95 T4.105
TRANSMITTING OUTSTANDING DESIGNED FOR THE RIGORS OF LIVESTOCK AND MIXED FARMING The T4 range has been designed with livestock and small mixed farmers in mind. Whether you re spending long days in the fields cultivating or carrying out hay and forage applications; maybe you re feeding your cattle or using your loader; or even hand sowing vegetables or cutting along at top transport speed; the T4 will satisfy your very need. Outstanding comfort from the segment-leading Deluxe VisionView cab. Unsurpassed visibility. A whole host of transmission variants to suit your farm. No task is too big. No task too small. The T4 does them all. Minimum height 2559mm / Maximum height 2609mm Minimum width 1947mm / Maximum width 2169mm
PRODUCTIVITY. EXACTLY WHAT IT SAYS ON THE BONNET. Your T4 s performance is immediately obviously. How? Quite simply it s on the bonnet. The first two digits T4 refer to the tractor s category and the following two or three, for example 105, refer to the maximum horsepower, rounded to the nearest five. What does that mean to you? You can buy your T4 safe in the knowledge that its performance will perfectly match your requirements.
PUTTING THE POWER TO THE GROUND The 24x24 Dual Command transmission features a clutchless Hi-Lo gear splitter that allows the operator to fine tune the gear selection, and reduce selected speed by up to 18% in order to increase torque at the wheels by 22%. The ergonomic Power Clutch button, located on the rear of the gear shift lever, enables operators to change gear without using the foot clutch, significantly enhancing comfort when working on uneven cultivated fields. FINE TUNE SHUTTLING How would you like to tailor the shuttle response to the task in hand? Now you can on Dual Command models! Choose soft for silky smooth shuttling during field work such as baling, medium for standard applications and the highly sensitive setting to change direction in the blink of an eye when carrying out loader work. The choice is yours! OUTSTANDING FEATURES. ABSOLUTE COMFORT. TAKING COMFORT TO A WHOLE NEW LEVEL The deluxe VisionView cab has set a new benchmark in mixed and livestock farming comfort. Oceans of space mean you can truly settle down and get comfortable. Acres of glass provide a crystal clear view of all implements. Front. Rear. Left. Right. Even up, courtesy of the standard high visibility roof hatch. You got everything covered. Cool comfort is guaranteed in all weathers courtesy of a powerful ten vent air conditioning system. If that wasn t enough, all primary controls have been precision placed on the Command Arc for ergonomic and intuitive operation.
COMMON RAIL. COMMON SENSE. The 3.4 litre F5C engine is fitted with state-of-the-art Common Rail technology for precision fuelling, which delivers near instantaneous response to changing load for zero slowdown during demanding applications. Cutting-edge Cooled Exhaust Gas Recirculation technology, fully in line with New Holland s below 120hp strategy for Tier 4A compliance, is compatible with B20, 20% biodiesel blends. CONSTANTLY DELIVERING MORE The T4 s engine has been specifically designed for agriculture. A constant power band from 1900-2300rpm offers outstanding in-field flexibility and reduced fuel consumption. An impressive 35% torque backup, when combined with Common Rail technology, significantly enhance transient response times. Transient response? What is that? Put simply, when the going gets tough you ll experience zero slowdown.
SELECT THE TYRES THAT SUIT YOU A wide range of tyres can be specified to suit your individual farming needs. For example, specify 540/65 R34 tyres to deliver maximum traction in slippery conditions. They also offer outstanding transport comfort all whilst reducing in-field compaction. Row-crop operations can select the 12.4 R36 tyres for maximum ground clearance to reduce damage to valuable salad vegetables.
PRECISION DRAFT CONTROL Would you ever have believed that a mouse could improve cultivation uniformity? Well, it certainly can! New Holland s optional electronic draft control is managed via an ergonomic mouse, situated on the Command Arc, and that perfectly nestles in the palm of your hand, it facilitates precision draft and depth control. HIGH PERFORMANCE, LOW EFFORT, LIFT CAPACITY The T4 can lift up to a mighty 3884kg, more than its own weight, and courtesy of award-winning Lift-O-Matic Plus technology you can do all of this with just one finger! The ergonomic lever enables you to lift and return an implement to a pre-set working depth time and again. Day in. Day out. ENHANCE FARMING VERSATILITY WITH FRONT LOADER The T4 was designed with front loaders in mind. Fully compatible with New Holland s range of front loaders, it s the perfect productivity combination. LOW MOUNTING POINTS FOR IMPROVED VISIBILITY The loader s low mounting brackets guarantee exceptional forward and downward visibility, both when the loader is mounted, and when it has been removed. Moreover, the low mounting points have lowered the tractor s overall centre of gravity, which adds up to greater stability when transporting full loads in the fully extended position.
MODELS T4.85 T4.95 T4.105 Engine* F5C F5C F5C No. of Cylinders / Aspiration / Valves / Emission level 4 / T / 2 / Tier 4 4 / T / 2 / Tier 4 4 / T / 2 / Tier 4 Fuel System - High Pressure Common Rail Capacity (cm 3 ) 3400 3400 3400 Max. horsepower - ISO TR14396 - ECE R120 [kw/hp(cv)] 63/86 73/99 79/107 Rated horsepower - ISO TR14396 - ECE R120 [kw/hp(cv)] 63/86 73/99 79/107 Rated engine speed (rpm) 2300 2300 2300 Max. torque - ISO TR14396 (Nm) 351@1500 407@1500 444@1500 12 X 12 Synchro Shuttle Minimum speed (30kph / 40kph) (kph) 1.73 / 2.06 1.73 / 2.06 1.73 / 2.06 20 X 12 Synchro Shuttle with Creeper Minimum speed (30kph / 40kph) (kph) 0.24 / 0.26 0.24 / 0.26 0.24 / 0.26 12 X 12 Powershuttle transmission (30kph / 40kph) Minimum speed (30kph / 40kph) (kph) 1.81 / 2.15 1.81 / 2.15 1.81 / 2.15 20 X 20 Powershuttle transmission [Optional Super Creeper (30kph / 40kph)] Minimum speed (30kph / 40kph) (kph) 0.25 / 0.30 0.25 / 0.30 0.25 / 0.30 24 X 24 Dual Command transmission (30kph / 40kph) Minimum speed (30kph / 40kph) (kph) 1.59 / 1.89 1.59 / 1.89 1.59 / 1.89 AXLES 2WD front axle 4WD front axle Steering angle 4WD ( ) 55 55 55 HYDRAULICS (Lpm) 48 / 64 48 / 64 48 / 64 (Lpm) 28 / 37 28 / 37 28 / 37 Lift-O-Matic Plus system (MDC)** Electronic Draft Control (EDC)*** REMOTE VALVES Type Deluxe Deluxe Deluxe Max. no. rear valves / Diverter 3 / 1 3 / 1 3 / 1 Max. no. mid mount valves 2 2 2 Mid mount joystick control LINKAGE Max. lift capacity at ball ends (with auxiliary lift ram) (kg) 3884 3884 3884 Front linkage max. lift capacity through the range (610 mm behind ball ends) (kg) 1850 1850 1850 PTO Electro hydraulic PTO engagement Soft Start PTO activation**** 540 540 / 1000 540 / 540E / 1000 with groundspeed Front PTO (1000rpm) OPERATOR ENVIRONMENT Deluxe VisionView cab with FOPS High visibility roof hatch Openable front windscreen Deluxe air suspension 15 swivel seat with seat belt Instructor seat with seat belt Tilting steering column Air conditioning MP3 Radio (with aux input socket) Optimum cab noise level - 77/311EEC (db(a)) 76 DIMENSIONS (ON REAR TYRES)***** 420/85R30 420/85R34 540/65R34 Overall length inc. front support to rear linkage (mm) 3771 3771 3771 Min. width (mm) 1947 1951 2169 Min. overall height (mm) 2559 2609 2609 Height at centre of rear axle to top of cab (mm) 1859 1859 1859 Ground clearance (4WD front axle) (mm) 428 478 478 Track width (min. / max.) (mm) 1527 / 1927 1531 / 1931 1629 / 1931 Wheelbase (2WD front axle / 4WD front axle) (mm) 2316 / 2258 2316 / 2258 2316 / 2258 Min. weight (kg) 3600 3600 3600 Standard Optional - Not available * Developed by FPT Industrial ** Synchro Shuttle and Powershuttle model only *** Dual Command models only **** Excluding Synchro Shuttle models ***** Rear Tyres other than those mentioned are available: 320/85R32, 420/70R30, 420/85R30, 480/70R30, 460/85R30, 420/85R34, 480/70R34. www.newholland.com The data indicated in this folder are approximate. The models described here can be subjected to modifications without any notice by the manufacturer. The drawings and photos may refer to equipment that is either optional or intended for other countries. Please apply to our Sales Network for any further information. Published by New Holland Brand Communications. Bts Adv. - Printed in Italy - 05/13-120026/INB