Dimming (Dali) Dali Dimmable LED Driver (Constant Current & Constant Voltage) The DCJolly Dali is a revolutionary multi voltage power supply which allows LEDs to be dimmed from any Dali dimming system. A series of dipswitches gives the user the option to flick the output to any of the following voltages (and maximum loads): 350mA (15W), 500mA (W {15W @ 1V}), 700mA (5W {15W @ 1V}), 10V (9W), 1V (10W), and 4V (W {15W @ 1V}). C Multi Voltage zip 3W DCJOLLY 9W-3W 1 9671 Dali Dimmable LED Driver (Constant Current & Constant Voltage) The DC Maxi Jolly Dali is a power supply for LEDs which can power both voltage LED strips (48 V) and power current powered LEDs (350 ma, 500 ma, 700 ma, 900 ma, 1050 ma).
The function mode is selected by means of the DIP SWITCH, which is below the terminal cover. C Multi Voltage zip 50W DCJOLLY MAX 50W 6311 DCC Dali Interface (Constant Current & Constant Voltage) 1V The DCC Dali Interface is an interface converting signals into PWM Signals. This converter can be poweredeither by mains (110-40 VAC) or by a 1 Vdc voltage. Please note: Technical information is available on this product, see technical tab above. C 1V zip W DCC W 3 6499 Optotronic Oti Dali Dimmable Driver (Constant Voltage) 40V/4V The Optotronic Oti Dali is a line voltage converter and PWM dimmer intergrated in a single unit. Product Benefits Flexible addressing via Areas of application For luminaires of protection classes I and II Suitable for separate mounting Suitable for indoor applications Product Features 4 channel converter Dimming range: 0-100 % luminous flux Suitable for 4 V LED modules One input for up to four addressable output channels 75 W output can be freely distributed among up to 4x4 V PWM output channels C 40V/4V zip
DC OTI 75/4 4 7834 Optotronic Oti Dali Dimmable Driver (Constant Voltage) The Optotronic Oti Dali Dim is a intelligent electronic constant-voltage 1-channel dimmer. Integrated TouchDIM functionality enables dimming/switching via standard switches. Please note: A power supply is required for this product. When using a 1V power supply the maximum load is 50W. When using a 4V power supply the maximum load is 1W. Product features Maximum output current: 5A Cable clamp housing for independent mounting Dimming range: 0.1-100 % Reversible protection mechanisms for short-circuits, overtemperature and -loads 10V Maximum 50W 4V Maximum 1W Dimmable C 10V/4V zip 50-1W DC OTI 10-4 10V (50W) / 4V (1W) 5 835 Dali-CV LED Interface Dimmable Driver (Constant Voltage) The Dali-CV LED Interface is a intelligent electronic constant-voltage 1-channel dimmer. Please note: A power supply is required for this product. When using a 1V power supply the maximum load is 100W. When using a 4V power supply the maximum load is 0W. Product features Maximum output current: 8A Cable clamp housing for independent mounting Operating Temperature: 50Â C Case Temperature: 80Â C 10V Maximum 100W 4V Maximum 0W Dimmable
C 10V/4V 100-0W 701-8A 10V (100W) / 4V (0W) 6 8939 Dali Dimmable LED Driver (Constant Current & Constant Voltage) The DCJolly Dali is a revolutionary multi voltage power supply which allows LEDs to be dimmed from any Dali dimming system. A series of dipswitches gives the user the option to flick the output to any of the following voltages (and maximum loads): 50mA (10W) 350mA (15W) 400mA (17W) 450mA (19W) 500mA (W) 550mA (W) 600mA (W) 700mA (W) 4V (16W) C Multi Voltage zip 3W DCJOLLY MIN 10W-W 7 10485 Dimmable LED Driver - DCC Dali Interface 1V The DCJolly MD Driver and DCC Dali Interface DCJolly MD is a revolutionary multi voltage power supply which allows LEDs to be dimmed from a regular dimmer. The DCJolly is powered by a 40V input, which means that only wires are required in order to be able to dim the LED circuit. A series of dipswitches gives the user the option to flick the output to any of the following voltages (and maximum loads):350ma (17W), 500mA (4W), 550mA (5W), 700mA (3W), 750mA (3W), 1V (10W), 4V (W), and 8V (W). The DCJolly does not have a minimum load to adhere to but you would still have to follow the minimum loads of the dimmer module you are using. This would usually be 5W - 60W, depending on the dimmer being used. The DCC Dali Interface is an interface converting signals into PWM Signals. This converter can be powered either by
mains (110-40 VAC) or by a 1 Vdc voltage. C 1V zip W DCJOLLY+DCC 8 1061 Optotronic Oti Dali Dimmable Driver (Constant Voltage) 40V/4V converter CON 1-10V LI is a multifunctional unit. On the one hand it is a converter which is accessed digitally via the interface in the same way as a ECG, and on theother hand it is a lighting controller in its own right. With its control output (combinedinterface 1-10V/0-10V) and load contact, ECG and electronic transformers can be dimmed and switched via 1-10V and dimmers via 0-10V. Load capacity of the signal output: max. 100 ma 0...10 V max. 5 ma active Switchable characteristic: linear/logarithmic Load capacity of switching contact: 5 A Touch DIM control of 1...10 V ECGs C 40V/4V zip DC OTI 75/4 9 10898 Oti Dali Dimmable Driver (Constant Current) 40V The reliable choice for the energy saving lighting: dimmable, embedded corridor functionality and advanced Touch Dim with daylight harvesting, constant lumen output. Digitally programmable. Automatic current set through the LEDSet interface. Features Wide operating range: 180mA - 700 ma Suitable for emergency lighting units. Smart dimming down to 1% Fully digitally programmable Overload protection C 40V/4V zip
DC OTI 5 5W 10 11180