LOMAS / MONDEFIT The most innovative anchorage method for tooth correction No extraction of healthy teeth Completion of tooth correction without gaps Symmetrical, beautiful smile For young people and young at heart ORTHODONTICS
ORTHODONTICS Table of Contents Introduction Page 3 Features and Advantages Page 4 MONDEFIT - Implants Page 5 MONDEFIT - Abutments, Impression Page 6 MONDEPLATES, MONDEFIT Accessories Page 7 LOMAS Screw Page 8-0 Instruments Page - 2 Container Page 3 Ordering Information Page 4 Page 2
The most innovative anchorage method for tooth correction The MONDEFIT System was developed based on the LOMAS System. Due to the compatibility of both systems by using the same instruments, this combination covers the complete range of orthodontic implantation. MONDEFIT / ORTHODONTICS The MONDEFIT System can be used for a variety of applications in the maxilla because of the design of the various abutments that are available. Indications include molar anchorage and distalization as well as anchorage for the retraction of anterior teeth and space closure. LOMAS / ORTHODONTICS The usage of Mini-Anchor-Screws has become a standard for orthodontic teatments. The LOMAS Screw offers many advantages, such as: high strength, immediate loadbearing of heavy forces, reliable andsecure-fixed anchorage. There are additional applications by combining the LOMAS System with the innovative MONDEFIT System (e.g. molar distalization). Page 3
Features and Advantages MONDEFIT LOMAS Some indications: Maxillary molar distalization Molar uprighting Anchorage for upper anterior teeth and molars Temporary tooth replacement indirect anchorage Features: Clinical proven applications screws Reliable and secure-fixed anchorage Special platform design Innovative head attachement design Advantages: Significantly less expensive than typical dental implants Immediate loading is possible and recommended Minimally invasive insertion protocol Orthodontics can insert themselves Easy to remove Internally retained fixation screw is integrated within each abutment Advantages: Provides improved high strength Better mechanical retention Avoid gingival impingement Reduced treatment time Easy to insert and remove Easy to combine with applications of orthodontic accessories Page 4
MONDEFIT - Implants (Packaging /ea.) Material: Titanium Orthodontic Screw.5 mm Orthodontic Screw 2.0 mm Art. No. Diameter (d) x Length Art. No. Diameter (d) x Length 33-M4A-507.5 x 7 mm 33-M4A-2007 2.0 x 7 mm 33-M4A-509.5 x 9 mm 33-M4A-2009 2.0 x 9 mm 33-M4A-20 2.0 x mm Length d Orthodontic Emerg. Screw 2.3 mm Art. No. 33-M4A-2309 Diameter (d) x Length 2.3 x 9 mm Page 5
MONDEFIT - Abutments Material: Implant steel 33-ME0-000 Abutment Standard, incl. Abutment screw 33-ME0-0002 Abutment with slot, incl. Abutment screw 33-ME2-000 Abutment with bracket, incl. Abutment screw 33-ME2-0002 Abutment with 2 brackets, incl. Abutment screw 33-ME-0002 Abutment with wire. mm (Length: 20 mm), incl. Abutment screw MONDEFIT - Impression Material: Steel 33-VX-000 Impression Cap Metal 33-VX-0002 Laboratory Analog Page 6
MONDEPLATES Material: Implant steel 33-MR0-000 MONDEPLATE connection plate.2 mm, 33-MP0-000 MONDEPLATE connection plate.2 mm, long (7.50 mm), incl. fixation screws short (2.50 mm), incl. fixation screws 33-MP-2 33-MR-2 MONDEPLATE connection plate,.2 mm, short, with. mm wire (Length: 20 mm), incl. fixation screws MONDEPLATE connection plate,.2 mm, long, with. mm wire (Length: 20 mm), incl. fixation screws 33-MB0-000 Fixation screws (2/ea.) MONDEFIT - Accessories 33-KM2-004 MONDEFIT Set, consisting of: 33-MZ2-0004 Activation Screw (2/ea.) 33-SZ2-000 Hex-wrench 33-MZ2-0002 33-MZ2-0006 MONDEFIT NiTi Spring (2/ea.), 240 g MONDEFIT NiTi Spring (2/ea.), 500 g 33-MZ2-0003 MONDEFIT Tubes (0/ea.) Page 7
LOMAS Screw (Packaging /ea.) Length Length d d STANDARD Screw.5 mm 33-507.5 x 7 mm 33-509.5 x 9 mm 33-5.5 x mm HOOK Screw.5 mm 33-2507.5 x 7 mm 33-2509.5 x 9 mm 33-25.5 x mm STANDARD Screw 2.0 mm 33-2207 2.0 x 7 mm 33-2209 2.0 x 9 mm 33-22 2.0 x mm HOOK Screw 2.0 mm 33-22007 2.0 x 7 mm 33-22009 2.0 x 9 mm 33-220 2.0 x mm STANDARD Emerg. Screw 2.3 mm 33-2309 2.3 x 9 mm HOOK Emerg. Screw 2.3 mm 33-2209 2.3 x 9 mm Page 8
LOMAS Screw (Packaging /ea.) q Length d horizontal suitable for arch wires QUATTRO Screw.5 mm q = 0.08 x 0.025, 33-3807.5 x 7 mm 33-3809.5 x 9 mm 33-38.5 x mm QUATTRO Screw.5 mm q = 0.022 x 0.028, 33-32207.5 x 7 mm 33-32209.5 x 9 mm 33-322.5 x mm QUATTRO Screw 2.0 mm q = 0.08 x 0.025, 33-4807 2.0 x 7 mm 33-4809 2.0 x 9 mm 33-48 2.0 x mm QUATTRO Screw 2.0 mm q = 0.022 x 0.028, 33-42207 2.0 x 7 mm 33-42209 2.0 x 9 mm 33-422 2.0 x mm QUATTRO Emerg. Screw 2.3 mm q = 0.08 x 0.025, 33-4909 2.3 x 9 mm QUATTRO Emerg. Screw 2.3 mm q = 0.022 x 0.028, 33-42309 2.3 x 9 mm Page 9
LOMAS Screw (Packaging /ea.) q Length d vertical suitable for arch wires QUATTRO V Screw 2.0 mm q = 0.08 x 0.025, 33-5807 2.0 x 7 mm 33-5809 2.0 x 9 mm 33-58 2.0 x mm QUATTRO V Screw 2.0 mm q = 0.022 x 0.028, 33-52207 2.0 x 7 mm 33-52209 2.0 x 9 mm 33-522 2.0 x mm QUATTRO V Emerg. Screw 2.3 mm q = 0.08 x 0.025, 33-5909 2.3 x 9 mm QUATTRO V Emerg. Screw 2.3 mm q = 0.022 x 0.028, 33-52309 2.3 x 9 mm Page 0
Instruments ML For MONDEFIT and LOMAS: 33-8232 Blade for angled handpiece, short, 23 mm, DENTAL 33-8237 Blade for angled handpiece, long, 33 mm, DENTAL 33-8240 Torque ratchet handle with insert 33-824 Torque ratchet handle without insert 33-8242 Screw holding insert for ratchet 2-2625 Drill.0 x 30 mm, WL 5 mm, DENTAL 0-6757 Drill.5 x 28 mm, WL 5 mm, DENTAL for.5 mm screws (max. 800 rpm) for 2.0 mm screws (max. 800 rpm) 0-6000 Screwdriver handle, rotatable, 9.5 cm 33-8230 Blade, long for 0-6000 Page
Instruments M For MONDEFIT only: 33-SK4-2900 33-SK4-290 Blade for Abutment Screw, 5 mm, DENTAL Blade for Abutment Screw, 25 mm, DENTAL 33-8235 Thumb Screw Mandrel for Dental shaft instruments 0-63024 Manual Turning Unit (for angled handpiece) Page 2
Container ML For MONDEFIT and LOMAS: 73-3960 Sterilizing tray for implants and instruments, empty, incl. lid and length clips 73-97007 Length clip 7 mm 73-97009 Length clip 9 mm 73-970 Length clip mm Page 3
MONDEFIT Instrument Set (Recommendation) Ordering information Art. No. Quantity Description 33-KS2-00 MONDEFIT Instrument Set, without implants consisting of: Sterilization and Storage 73-3960 Sterilizing tray for implants and instruments, empty, incl. lid and length clips Instruments 33-8235 33-SK4-2900 33-8232 2-2625 0-6757 0-6000 33-8230 Thumb Screw Mandrel for Dental shaft instruments Blade for Abutment Screw, 5 mm, DENTAL Blade for angled handpiece, short, 23 mm, DENTAL Drill.0 x 30 mm, WL 5 mm, DENTAL for.5 mm screws (optional) Drill.5 x 28 mm, WL 5 mm, DENTAL for 2.0 mm screws (optional) Alternative for 33-8232: Screwdriver handle, rotatable, 9.5 cm Blade, long for 0-6000 LOMAS Instrument Set (Recommendation) Ordering information Art. No. Quantity Description 33-500 LOMAS Instrument Set, without implants consisting of: Sterilization and Storage 73-3960 Sterilizing tray for implants and instruments, empty, incl. lid and length clips Instruments 0-6000 33-8230 2-2625 0-6757 Screwdriver handle, rotatable, 9.5 cm Blade, long for 0-6000 Drill.0 x 30 mm, WL 5 mm, DENTAL for.5 mm screws (optional) Drill.5 x 28 mm, WL 5 mm, DENTAL for 2.0 mm screws (optional) Page 4
Notes Page 5
High Quality Implants Made by MONDEAL We reserve the right to make catalog and design changes arising from further developments and modifications. Pictures, product descriptions and texts are the property of MONDEAL Medical Systems GmbH. Further use and reproduction by Third Parties requires written consent from MONDEAL Medical Systems GmbH. All rights reserved! Note: Responsibility for the selection of the patient, for adequate training as well as the decision as to the choice and use of the implants, a post-operative removal or retention of implants is the sole decision of the surgeon. All brands and logos referred to in this brochure, registered by Third Parties, are subject without restriction to the legal provisions currently in force and to the rights of ownership of the respective registered owner. 20 - MONDEAL Medical Systems GmbH Am Gewerbering 7 78570 Mühlheim a. d. Donau/Germany Phone +49 7463 99307 0 Fax +49 7463 99307 33 mail@mondeal.de 97-D50-E LOMAS_MONDEFIT 02/ 0-