Cholesterol BP. Cholesterol

Similar documents
Organic Chemistry Lab Experiment 4 Preparation and Properties of Soap

Filtered Prime Yellow Type 1. Centrifuged fatty Grey Type 3. Light orange

PETER GREVEN Your partner for food/feed, pharma & cosmetic additives (FPC)

PETER GREVEN Competence in pharma, cosmetics and food stuffs

EMULSIFYING PROCEDURE

White Oils and Soft Paraffins

Polarity and Properties Lab PURPOSE: To investigate polar and non-polar molecules and the affect of polarity on molecular properties.

IN SILICONICS APPLICATIONS INCI:SORBITAN OLIVATE

Figure 3-1-1: Alkaline hydrolysis (saponification) of oil to make soaps.

- KOBAYASHI ZEIN DP -

1. Description IMWITOR 600 is an ester from polyglycerin and plant derived condensed castor oil fatty acids. Tests Value Unit Method

PREPARATION AND PROPERTIES OF A SOAP

Foam: A Unique Delivery Vehicle for Topically Applied Formulations

CHEM 2423 Recrystallization of Benzoic Acid EXPERIMENT 4 - Purification - Recrystallization of Benzoic acid

Name Lab #3: Solubility of Organic Compounds Objectives: Introduction: soluble insoluble partially soluble miscible immiscible

Wire Drawing Soap Lubrication: Principles And Factors Affecting Selection

H H H O. Pre-Lab Exercises Lab 6: Organic Chemistry. Lab 6: Organic Chemistry Chemistry Define the following: a.

Chapter 13 Solution Dynamics. An Introduction to Chemistry by Mark Bishop

Tiangang TM BW-10LD (622)

Because we care... Dermocosmetic Product List

Kolliphor Grades Emulsifier for topical pharmaceutical applications

Guar Derivative Products for Hair & Skin Conditioning

Lab: Properties of Polar and Nonpolar Substances

GELITA Sol C for Radiant Beauty. Comprises high-performance natural collagen peptides Provides smooth and wrinkle-free skin Repairs and protects hair

ISANE Isoparaffin Products

Non-polar hydrocarbon chain

Chapter 5 Classification of Organic Compounds by Solubility

EUDRAGIT E 100, EUDRAGIT E PO and

Ch24_PT MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

Quality of Soaps Using Different Oil Blends

FATTY ALCOHOLS. Rofanol

CARBOWAX SENTRY Polyethylene Glycols Innovation, Performance, Flexibility and Compliance from the Global Leader in PEGs

ISOLATION OF CAFFEINE FROM TEA

Laboratory 28: Properties of Lipids

Synthesis of Isopentyl Acetate

CERTIFICATE OF ANALYSIS Methyl 4-Hydroxybenzoate

Laboratory 22: Properties of Alcohols

Specimen Memo Fragrance Use

PROPERTIES OF GLYCERINE PHYSICAL PROPERTIES

Aquagent. Pyridine-free volumetric Karl Fischer reagents

OLIVEM INCI: Cetearyl Olivate, Sorbitan Olivate

CHEM 121. Chapter 19, Name: Date:

RBS detergents for laboratories

Chapter 6. Solution, Acids and Bases

RESEARCH, FORMULATION, PRODUCTION AND FILLING FOR THIRD PARTIES OF THE FOLLOWING PRODUCTS:

The chemical components of detergents and their roles in the washing process

Experiment #10: Liquids, Liquid Mixtures and Solutions

Ambition Flexibility Innovation. The. power. of SMART. ingredients. Silicones for Personal Care

AMBERLITE IRP64 Pharmaceutical Grade Cation Exchange Resin (Polacrilex Resin)

About us. SNF has 40% market share, 1 B sales and manufactures tons of polymers on a world wide base.

CERTIFICATE COSMOS URTEKRAM INTERNATIONAL A/S, Klostermarken MARIAGER DENMARK

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Page 1 of 5. Purification of Cholesterol An Oxidative Addition-Reductive Elimination Sequence

The use of lanolin in helping to treat sore and cracked nipples in breastfeeding women -

Carbohydrates, proteins and lipids

EXPERIMENT 9 (Organic Chemistry II) Pahlavan - Cherif Synthesis of Aspirin - Esterification

Creating a sustainable future with pine chemicals BIOBASED SOLUTIONS

PRETREATMENT TECHNICAL DATA SHEET WATER EMULSIFIABLE RUST PREVENTATIVE PRODUCT DESCRIPTION

Advantages and Disadvantages of Low VOC Vegetable Based Metalworking Fluids

Fish Oil, Omega 3 Fatty Acids, EPA and DHA. And the Whole Stinking Story! By: Terry Lemerond

POLYVINYL ALCOHOL. SYNONYMS Vinyl alcohol polymer, PVOH, INS No DEFINITION DESCRIPTION FUNCTIONAL USES CHARACTERISTICS

Objective: Preparation of Materials Lesson Instructions

Chapter 14 Solutions

Lipids. There are 2 types of lipids; those that contain the structural component of a fatty acid; and

Crude Fat Methods Considerations AAFCO Lab Methods & Services Committee Crude Fat Best Practices Working Group January 2014

Lipid Metabolism. Dr. Howaida Nounou Biochemistry department Sciences college

Table of Contents. Pricing subject to change without notice. Always check the website for current pricing

Introduction to Biodiesel Chemistry Terms and Background Information

Soap, Detergent, and Water quality. Ihuoma Lucy

Spring water deep underground water that has been tested free of pathogens.

PLANTASENS CRAMBISOL

Southern Scentsations. Body Butters. The Basics

Winterizing Your Trailer and Storage Ideas

EXAMPLE EXERCISE 4.1 Change of Physical State

Synthesis of Aspirin and Oil of Wintergreen

INDUSTRIAL CHEMICALS

AMBERLITE IRP69 Pharmaceutical Grade Cation Exchange Resin (Sodium Polystyrene Sulfonate USP)

SUGAR ESTER SYNTHESIS IN HIGH PRESSURE ACETONE-CO 2 SYSTEM

AQUA SHINE POLISH Material Safety Data Sheet

Experiment 8 Preparation of Cyclohexanone by Hypochlorite Oxidation

Vacuum and Compressor Systems for the Chemical Process Industry

CARBOWAX Polyethylene Glycols Innovation, Performance, Flexibility and Quality from the Global Leader in PEGs

Experiment #8 properties of Alcohols and Phenols

Body Buffing Scrub What is it? An all-over body scrub to be used with Body Contouring Crème to soften and smooth skin

experiment5 Understanding and applying the concept of limiting reagents. Learning how to perform a vacuum filtration.

STEVIOL GLYCOSIDES. Chemical and Technical Assessment. Prepared by Harriet Wallin FAO 2004

It's in the details. JOST MINERAL GUIDE

Material Safety Data Sheet

Approved for use September 2015 August 2016 (VERSION 2 ISSUED 16 OCTOBER 2015) Guidance

Material Safety Data Sheet

Determination of Specific Nutrients in Various Foods. Abstract. Humans need to consume food compounds such as carbohydrates, proteins, fats,

Temperature C Cure time to reach hours LSS > 1MPa minutes

Adhesive resins product guide

CHEM 2423 Extraction of Benzoic Acid EXPERIMENT 6 - Extraction Determination of Distribution Coefficient

The Advantages & Challenges of Phase Change Materials (PCMs) In Thermal Packaging. Author Richard M. Formato, R&D Manager Cold Chain Technologies

EXILVA, NATURAL PERFORMANCE ENHANCER IN PAINTS AND COSMETICS

Silicone products for tissues

In this experiment, we will use three properties to identify a liquid substance: solubility, density and boiling point..

83 to 87% carbon 11-15% hydrogen 0.1-7% sulphur % oxygen % nitrogen

Q&A. SHELLAC SYSTEM: XPRESS5 Top Coat

Transcription:

Cholesterol BP Cholesterol BP Cholesterol CAS No. 57-88-5 EINECS No. 200-353-2 Cholesterol Feed Grade 0.3 maximum Optical Rotation -34 to -38 Melting Point, 145-150 Loss on Drying 0.1 maximum Purity, %(GC) 91.0 minimum Identification Comply Solubility Soluble in Acetic Acid, Acetone, Alcohol, Ether, Benzene, Chloroform, Dioxane, Toluene, Pyridine, Hexane. Insoluble in Water Cholesterol BP is a white odourless powder extracted from wool grease. Its content is not less than 91%, that meets current BP and EP Pharmacopoeia requirements. Primarily used as an additive in prawn feed preparations to enhance the growth and life expectancy of juvenile farmed prawns. As its function of forming film, astringing sweat pores and preventing wrinkle and aging, which could help the skin resuming stretch when used in the cream. Also used as an O/W or W/O emulsifying agent in lotions and creams due to excellent emulsifying and stabilizing properties.

Cholesterol NF Cholesterol NF Cholesterol CAS No. 57-88-5 EINECS No. 200-353-2 Cholesterol Pharmaceutical 0.3 maximum Optical Rotation -34 to -38 Melting Point, 147-150 Loss on Drying 0.3 maximum 0.1 maximum Purity, %(GC) 95.0 minimum Identification Comply Solubility Soluble in Acetic Acid, Acetone, Alcohol, Ether, Benzene, Chloroform, Dioxane, Toluene, Pyridine, Hexane. Insoluble in Water Cholesterol NF is a white odourless powder extracted from wool grease. It is a minimum purity of 95% that meets the current USP Pharmacopoeia requirements. Primarily used as the precursor for the production of Vitamin D3 as well as for the pharmaceutical manufacture of Cholesteryl Esters and Steroid Hormones. Used as an O/W or W/O emulsifying agent in lotions and creams due to excellent emulsifying and stabilizing properties.

Isopropyl Lanolate Isopropyl Lanolate Isopropyl Lanolate CAS No. 63393-93 - 1 EINECS No. 264-119-1 Isopropyl Ester of Lanolic Acid Appearance Soft, yellow or amber buttery solid 14.0 maximum Saponification Value, mgkoh/g 135-165 Hydroxyl Value, mgkoh/g 40-60 Loss on Drying, % 0.2 maximum Isopropyl Lanolate is the ester of selective Lanolin Fatty Acids reacted with Isopropyl Alcohol. The crude ester is subjected to two stage molecular distillation where the various different molecular weight fractions of the crude ester are separated. The mid fraction is carefully removed and then sent through a series of falling film evaporators to remove any unpleasant smells that may be present. Easy to apply melting on contact with the skin. Readily absorbed without stickiness. Good lubricant and glossing agent. Lipsticks, creams and lotions for dry skin, superfatting agent in soaps. Non-greasy hydrophobic binder in pressed powders.

Lanolin Alcohol Cosmetic Lanolin Alcohol Cosmetic Lanolin Alcohol CAS No. 8027-33-6 EINECS No. 232-430-1 Wool Alcohol / Woolwax Alcohol Color, Gardner Saponification Value, mgkoh/g Loss on Drying, % Melting Point, Cholesterol Content, % (GC) 10 maximum 2.0 maximum 12 maximum 50 minimum 0.15 maximum 2 minimum Lanolin Alcohol Cosmetic is a purified mixture of sterols, composed of cholesterol, lanosterol, agnosterol plus some straight and branched chain aliphatic alcohols with a mean molecular weight of approximately 370. It is obtained by molecular distillation of alkaline hydrolysis of lanolin. Lanolin Alcohol Cosmetic is a pale yellow, waxy solid with practically no odor. It is insoluble in water. Used as powerful water-in-oil and auxiliary oil-in-water emulsifier, emollient and conditioner, in water-in-oil protecting cream, protective baby cream, nourishing and moisturizing cream, cleansing and cold cream, sunscreen cream and lotion, eye and lip product.

Lanolin Alcohol EP200 Lanolin Alcohol EP200 Lanolin Alcohol CAS No. 8027-33-6 EINECS No. 232-430-1 Wool Alcohol / Woolwax Alcohol Color, Gardner 10 maximum 2.0 maximum Saponification Value, mgkoh/g 12 maximum Melting Point, 50-90 Loss on Drying, % 0.1 maximum Water Absorption Capacity, % 200 minimum Cholesterol Content, % 30.0 minimum Lanolin Alcohol is the extracted, unsaponifiable fraction of wool grease. It is a mixture of alcohols comprising cholesterol, lanosterol, agnosterol and their dihydro derivatives plus straight and branched chain aliphatic alcohols. The wax is pale yellow and free from odour and detergents. It s a natural and safe product applied extensively in pharmaceutical and cosmetics for years, which have been proved to be very safe product. Used as powerful water-in-oil and auxiliary oil-in-water emulsifier, emollient and conditioner, in water-in-oil protecting cream, protective baby cream, nourishing and moisturizing cream, cleansing and cold cream, sunscreen cream and lotion, eye and lip product.

Lanolin Alcohol Pharma Lanolin Alcohol Pharma Lanolin Alcohol CAS No. 8027-33-6 EINECS No. 232-430-1 Wool Alcohol / Woolwax Alcohol Color, Gardner 10 maximum 2.0 maximum Saponification Value, mgkoh/g 12 maximum Melting Point, 58 Loss on Drying, % 0.15 maximum Water Absorption Capacity, % 200 minimum Cholesterol Content, % 30.0 minimum Lanolin Alcohol is the extracted, unsaponifiable fraction of wool grease. It is a mixture of alcohols comprising cholesterol, lanosterol, agnosterol and their dihydro derivatives plus straight and branched chain aliphatic alcohols. The wax is pale yellow and free from odour and detergents. It s a natural and safe product applied extensively in pharmaceutical and cosmetics for years, which have been proved to be very safe product. Used as powerful water-in-oil and auxiliary oil-in-water emulsifier, emollient and conditioner, in water-in-oil protecting cream, protective baby cream, nourishing and moisturizing cream, cleansing and cold cream, sunscreen cream and lotion, eye and lip product.

Lanolin Fatty Acid Bleached Lanolin Fatty Acid Bleached Lanolin Acid CAS No. 68424-43-1 EINECS No. 270-302-7 LFA Color, Gardner Melting Point, Loss on Dry, % 10 maximun 120 minimum 50 minimum 1.0 maximum 0.15 maximum Lanolin Fatty Acids (Bleached) is a product of the alkaline hydrolysis of Lanolin, prepared by purifying the wool grease that is a byproduct from when sheep wool is finished into wool products. The fatty acids is a complex mixture of straight chain acids, branched chain acids and hydroxy acids. It is in the form of a hard, waxy solid. The majority of the mixture of fatty acids is saturated with carbon chain lengths varying from C8 to C40. Used in detergent, shampoo, shaving cream and eye makeup due to its permeability to skin, antibacterial and emulsifying property, and as anti-corrosion agent, leather auxiliaries as well. Also used as Metallic soap, activator, mold release agent material.

Lanolin Fatty Acid Distilled Lanolin Fatty Acid Distilled Lanolin Acid CAS No. 68424-43-1 EINECS No. 270-302-7 LFA Color, Gardner Melting Point, Loss on Dry, % 8 maximun 120 minimum 50 minimum 1.0 maximum 0.15 maximum Lanolin Fatty Acids (Distilled) is a molecular distillation product of the alkaline hydrolysis of Lanolin, prepared by purifying the wool grease that is a byproduct from when sheep wool is finished into wool products. The fatty acids is a complex mixture of straight chain acids, branched chain acids and hydroxy acids. It is in the form of a hard, waxy solid. The majority of the mixture of fatty acids is saturated with carbon chain lengths varying from C8 to C40. It is a white solid soluble in ethanol, castor oil and hot petrolatum. Used in detergent, shampoo, shaving cream and eye makeup due to its permeability to skin, antibacterial and emulsifying property, and as anti-corrosion agent.

Lanolin Fatty Acid Industrial Lanolin Fatty Acid Industrial Lanolin Acid CAS No. 68424-43-1 EINECS No. 270-302-7 LFA / Wool Grease Fatty Acid Melting Point, Loss on Dry, % 120 minimum 50 minimum 2.0 maximum 0.15 maximum Lanolin Fatty Acids is a product of the alkaline hydrolysis of Lanolin, prepared by purifying the wool grease that is a byproduct from when sheep wool is finished into wool products. The fatty acids is a complex mixture of straight chain acids, branched chain acids and hydroxy acids. It is in the form of a hard, waxy solid. The majority of the mixture of fatty acids is saturated with carbon chain lengths varying from C8 to C40. Lanolin Fatty Acids is characterized by a high softening point, low iodine value and a considerable percentage of hydroxy acids. Because they possess emulsifying power and high adhesion to various surfaces as well as the excellent oil binding properties of their metal soaps. It is widely used in lubricating greases. It also has found a home in solid and liquid polishing compositions, emulsion polishes, mold release ages and anti-corrosion compounds.

Lanosterol Lanosterol ISO Cholesterol CAS No. 79-63-0 EINECS No. 201-214-9 Lanosterol/Cryptosterol/Di-hydro-lanosterol Melting Point, Acidity, ml Loss on Drying, % Purity, % 135 minimum 0.3 maximum 90.0 minimum A white odorless powder extracted from the sterol rich fraction of wool grease. Bonds very well with solvents being highly lipophilic when used as a thickener and is very stable, rarely crystallizing from the solvent when used. Topical lipid applications containing lanosterol impart a silky smooth feel and are ideal for use in lip gloss and lipsticks as well as deodorant sticks and insect repellant sticks. Added benefits include excellent pay off characteristics, plus an emollient homogenous film when spread over the skin.