STRAUMANN DENTAL IMPLANT SYSTEM RESToRATIVE SELECTION GUIDE

STRAUMANN DENTAL IMPLANT SYSTEM RESToRATIVE SELECTION GUIDE

The ITI (International Team for Implantology) is academic partner of Institut Straumann in the areas of research and education.

RESTORATIVE SELECTION GUIDE Straumann Bone Level Prosthetics Single Crown 1 Bridge 4 Removable 7 Straumann Tissue Level Prosthetics Single Crown 10 Bridge 13 Removable 15

BONE LEVEL SINGLE CROWN Description BONE LEVEL REGULAR CONNECTION Gold abutment Straumann CADCAM abutment, ZrO 2 RC Straumann Anatomic IPS e.max 0 Final 022.4410 022.4812 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 15 024.4370 022.4814 022.4822 Screw Retained RC Straumann Anatomic IPS e.max 15 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 15 RC Straumann Anatomic IPS e.max 15 025.4202-short/ 025.4205-long 025.4201 025.4101 024.4371 022.4824 022.4832 022.4834 022.4842 022.4844 BONE LEVEL NARROW CONNECTION Gold abutment, crown 024.2370 022.2410 Straumann CADCAM abutment, ZrO 2 025.2202-short/ 025.2205-long 025.2201 025.2101 024.2371 1 IPS e.max is a registered trademark of Ivoclar Vivadent, AG.

Description BONE LEVEL REGULAR CONNECTION RC Anatomic abutment 0 GH 2.0 mm RC Anatomic abutment 0 GH 3.5 mm RC Anatomic abutment 15 GH 2.0 mm RC Anatomic abutment 15 GH 3.5 mm Final / 022.4102 022.4104 022.4152 022.4154 Meso abutment 022.4202 Gold abutment, crown 024.4371 022.4410 cement retained Straumann CADCAM abutment, ZrO 2 Straumann CADCAM abutment, Ti RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 15 RC Straumann Anatomic IPS e.max 15 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 15 RC Straumann Anatomic IPS e.max 15 D 5.0 mm, GH 1.0 mm, AH 4.0 mm, crown 025.4202-short/ 025.4205-long 025.4201 025.4101 024.4370 022.4812 022.4814 022.4822 022.4824 022.4832 022.4834 022.4842 022.4844 027.4313 D 5.0 mm, GH 2.0 mm, AH 4.0 mm, crown D 5.0 mm, GH 3.0 mm, AH 4.0 mm, crown D 5.0 mm, GH 1.0 mm, AH 5.5 mm, crown D 5.0 mm, GH 2.0 mm, AH 5.5 mm, crown D 5.0 mm, GH 3.0 mm, AH 5.5 mm, crown D 6.5 mm, GH 1.0 mm, AH 4.0 mm, crown D 6.5 mm, GH 2.0 mm, AH 4.0 mm, crown D 6.5 mm, GH 3.0 mm, AH 4.0 mm, crown D 6.5 mm, GH 1.0 mm, AH 5.5 mm, crown D 6.5 mm, GH 2.0 mm, AH 5.5 mm, crown D 6.5 mm, GH 3.0 mm, AH 5.5 mm, crown 027.4314 027.4315 027.4316 027.4317 027.4318 027.4319 027.4320 027.4321 027.4322 027.4323 027.4324 2 Bone-Level Cementable All-In-One Sets contain cementable abutment, screw, analog, burnout coping, impression cap and protective cap.

BONE LEVEL SINGLE CROWN (continued) Description NARROW CONNECTION NC Anatomic abutment 0 GH 2.0 mm NC Anatomic abutment 0 GH 3.5 mm NC Anatomic abutment 15º GH 2.0 mm Final / 022.2102 022.2104 022.2152 NC Anatomic abutment 15º 022.2154 GH 3.5 mm 025.2202-short/ 025.2205-long 025.2201 025.2101 Meso abutment 022.2202 Gold abutment 022.2410 cement retained Straumann CADCAM abutment, ZrO 2 Straumann CADCAM abutment, Ti NC Cementable All-In-One Set, D 3.5 mm, GH 1.0 mm, AH 4.0 mm, crown NC Cementable All-In-One Set, D 3.5 mm, GH 2.0 mm, AH 4.0 mm, crown NC Cementable All-In-One Set, D 3.5 mm, GH 3.0 mm, AH 4.0 mm, crown NC Cementable abutment, D 3.5 mm, GH 1.0 mm, AH 5.5 mm/ NC Cementable abutment, D 3.5 mm, GH 2.0 mm, AH 5.5 mm/ NC Cementable abutment, D 3.5 mm, GH 3.0 mm, AH 5.5 mm/ 025.2116 024.2346 027.4301 027.4302 027.4303 022.2315/ 023.2316-plastic 022.2316/ 023.2316-plastic 022.2317/ 023.2316-plastic NC Cementable All-In-One Set, D 5.0 mm, GH 1.0 mm, AH 4.0 mm, crown NC Cementable All-In-One Set, D 5.0 mm, GH 2.0 mm, AH 4.0 mm, crown NC Cementable All-In-One Set, D 5.0 mm, GH 3.0 mm, AH 4.0 mm, crown NC Cementable All-In-One Set, D 5.0 mm, GH 1.0 mm, AH 5.5 mm, crown NC Cementable All-In-One Set, D 5.0 mm, GH 2.0 mm, AH 5.5 mm, crown NC Cementable All-In-One Set, D 5.0 mm, GH 3.0 mm, AH 5.5 mm, crown 027.4307 027.4308 027.4309 027.4310 027.4311 027.4312 3

BONE LEVEL BRIDGE Description Final / REGULAR CONNECTION Gold abutment, bridge 025.4202-short/ 025.4205-long 025.4201 025.4101 024.4375 022.4430 D 4.5 mm, H 1.0 mm/ 022.4741/ 023.4741-gold or 023.4744-plastic D 4.5 mm, H 2.5 mm/ 025.4242 025.4241-04 025.4141 024.4342 022.4742/ 023.4741-gold or 023.4744-plastic D 4.5 mm, H 4.0 mm/ 022.4744/ 023.4741-gold or 023.4744-plastic D 6.5 mm, H 1.0 mm/ 022.4761/ 023.4761-gold or 023.4764-plastic D 6.5 mm, H 2.5 mm/ 025.4262 025.4261-04 025.4161 024.4362 022.4762/ 023.4761-gold or 023.4764-plastic D 6.5 mm, H 4.0 mm/ 022.4764/ 023.4761-gold or 023.4764-plastic Screw Retained RC Multi-Base abutment 25º A/ RC Multi-Base abutment 25º B/ NARROW CONNECTION 025.4206 025.4106 024.4307 022.4782/ 023.4701-gold or 023.4704-plastic 022.4786/ 023.4701-gold or 023.4704-plastic D 3.5 mm, H 1.0 mm/ 022.2731/ 023.2731-gold 023.2734-plastic D 3.5 mm, H 2.5 mm/ 025.2232 025.2231-04 025.2131 024.2332 022.2732/ 023.2731-gold 023.2734-plastic D 3.5 mm, H 4.0 mm/ 022.2734/ 023.2731-gold 023.2734-plastic D 4.5 mm, H 1.0 mm/ 022.2741/ 023.2741-gold 023.2744-plastic D 4.5 mm, H 2.5 mm/ 025.2242 025.2241-04 025.2141 024.2342 022.2742/ 023.2741-gold 023.2744-plastic D 4.5 mm, H 4.0 mm/ 022.2744/ 023.2741-gold 023.2744-plastic NC Multi-Base abutment 25º A/ 022.2782/ 023.2701-gold 023.2704-plastic NC Multi-Base abutment 25º B/ 025.2206 025.2106 024.2307 022.2786/ 023.2701-gold 023.2704-plastic 4

BONE LEVEL BRIDGE (continued) Description REGULAR CONNECTION RC Anatomic abutment 0 GH 2.0 mm RC Anatomic abutment 0 GH 3.5 mm RC Anatomic abutment 15 GH 2.0 mm RC Anatomic abutment 15 GH 3.5 mm Final / 022.4102 022.4104 022.4152 022.4154 CEMENT Retained Meso abutment 022.4202 Straumann CADCAM abutment, ZrO 2 Straumann CADCAM abutment, Ti RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 15 RC Straumann Anatomic IPS e.max 15 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 0 RC Straumann Anatomic IPS e.max 15 RC Straumann Anatomic IPS e.max 15 025.4202-short/ 025.4205-long 025.4201 025.4101 024.4371 024.4370 022.4812 022.4814 022.4822 022.4824 022.4832 022.4834 022.4842 022.4844 Gold abutment, bridge 025.4202-short/ 025.4205-long 025.4201 025.4101 022.4410 5

Description NARROW CONNECTION Final / CEMENT Retained NC Anatomic abutment 0 GH 2.0 mm NC Anatomic abutment 0 GH 3.5 mm NC Anatomic abutment 15º GH 2.0 mm 022.2102 022.2104 022.2152 NC Anatomic abutment 15º 022.2154 GH 3.5 mm 025.2202-short/ 025.2205-long 025.2201 025.2101 Meso abutment 022.2202 Gold abutment 022.2410 Straumann CADCAM abutment, ZrO 2 Straumann CADCAM abutment, Ti 6

BONE LEVEL REMOVABLE Description REGULAR CONNECTION Final / Gold abutment, bridge 025.4202-short/ 025.4205-long 025.4201 025.4101 024.4375 022.4430 D 4.5 mm, H 1.0 mm/ D 4.5 mm, H 2.5 mm/ D 4.5 mm, H 4.0 mm/ D 6.5 mm, H 1.0 mm/ D 6.5 mm, H 2.5 mm/ D 6.5 mm, H 4.0 mm/ RC Multi-Base abutment 25º A/ RC Multi-Base abutment 25º B/ RC abutment for bars, Gold 025.4242 025.4241-04 025.4141 024.4342 025.4262 025.4261-04 025.4161 024.4362 025.4206 025.4106 024.4307 022.4741/023.4741-gold/ 023.4744-plastic or 023.4746-Ti 022.4742/023.4741-gold/ 023.4744-plastic or 023.4746-Ti 022.4744/023.4741-gold/ 023.4744-plastic or 023.4746-Ti 022.4761/023.4761-gold/ 023.4764-plastic or 023.4766-Ti 022.4762/023.4761-gold/ 023.4764-plastic or 023.4766-Ti 022.4764/023.4761-gold/ 023.4764-plastic or 023.4766-Ti 022.4782/023.4702-gold/ 023.4704-plastic or 023.4706-Ti 022.4786/023.4702-gold/ 023.4704-plastic or 023.4706-Ti 022.4701 BAR 025.4202-short/ RC abutment for bars, Ti 025.4205-long 025.4201 025.4101 024.4375 022.4702 Connection Bars Dolder bar, mini/matrix 048.411/048.413 Dolder bar, regular/matrix 048.412/048.414 NARROW CONNECTION D 3.5 mm, H 1.0 mm/ D 3.5 mm, H 2.5 mm/ D 3.5 mm, H 4.0 mm/ D 4.5 mm, H 1.0 mm/ D 4.5 mm, H 2.5 mm/ D 4.5 mm, H 4.0 mm/ NC Multi-Base abutment 25º A/ 025.2232 025.2231-04 025.2131 024.2332 025.2242 025.2241-04 025.2141 024.2342 022.2731/023.2734-plastic/ 023.2732-Gold or 023.2736-Ti 022.2732/023.2734-plastic/ 023.2732-Gold or 023.2736-Ti 022.2734/023.2734-plastic/ 023.2732-Gold or 023.2736-Ti 022.2741/023.2744-plastic/ 023.2742-Gold or 023.2746-Ti 022.2742/023.2744-plastic/ 023.2742-Gold or 023.2746-Ti 022.2744/023.2744-plastic/ 023.2742-Gold or 023.2746-Ti 022.2782/023.2704-plastic/ 023.2702-Gold/023.2706-Ti NC Multi-Base abutment 25º B/ 025.2206 025.2106 024.2307 022.2786/023.2704-plastic/ 023.2702-Gold/023.2706-Ti NC for Bars, Gold 022.2701 NC for Bars, Ti 025.2202-short/ 025.2205-long 025.2201 025.2101 024.2375 022.2702 7

Description REGULAR CONNECTION RC LOCATOR, AH 1.0 mm Final 022.4501 RC LOCATOR, AH 2.0 mm 022.4502 RC LOCATOR, AH 3.0 mm 022.4503 RC LOCATOR, AH 4.0 mm 048.197V4 025.0120-04 022.4504 RC LOCATOR, AH 5.0 mm 022.4505 RC LOCATOR, AH 6.0 mm 022.4506 NARROW CONNECTION NC LOCATOR, AH 2.0 mm 022.2502 NC LOCATOR, AH 3.0 mm 022.2503 LOCATOR NC LOCATOR, AH 4.0 mm 022.2504 048.197V4 025.0120-04 NC LOCATOR, AH 5.0 mm 022.2505 NC LOCATOR, AH 6.0 mm 022.2506 Components for denture LOCATOR male processing package 048.189V2 Clear, 5 lbs 048.190V4 Pink, 3 lbs 048.191V4 Blue, 1.5 lbs 048.192V4 LOCATOR male processing package, extended range 048.182V2 Green, 3 4 lbs 048.193V4 Orange, 2 lbs 048.188V4 Red, 1.5 lbs 048.194V4 Grey, 0 lbs 048.181V4 025.0120-04 coping 048.197V4 Block-out spacer 048.196V20 Processing male 048.195V4 Processing Spacer 048.218V4 Holder 046.413V4 8 LOCATOR is a registered trademark of Zest Anchors, Inc.

STRAUMANN PROSTHETICS For both tissue-level and bone-level implants, Straumann offers a broad range of standard and custom abutments in a range of materials, heights, diameters and angulations. PROSTHETIC SIMPLICITY n All-In-One Sets package compatible components in a single kit n One restorative kit for bone-level and tissue-level implants n Color-coded prosthetic components for easy reference n Prosthetic planning kits let you plan the ideal esthetics for your patients designed for a Secure, Precise Fit Morse Taper and CrossFit Connection n Morse taper connection to Straumann tissue-level implants provides a secure, frictional fit n CrossFit Connection is designed to ensure a secure and precise fit between the Straumann bone-level implant and authentic Straumann bone-level abutments. No other manufacturer has the CrossFit Connection. Customers have reported implant and abutment failures when non-straumann abutments are used with Straumann implants. Authentic Straumann CrossFit Connection CrossFit Connection A A A Groove Limitations of competitor design n Competitor abutments are not designed using Straumann s precise engineering specifications n The square-shaped connection, shown below, provides surface contact with only the protrusions and can undermine security n The resulting imprecise fit leaves gaps that can lead to compromised performance Cylinder Groove Each CrossFit design element is designed to serve an important purpose n The CrossFit Connection supports the distribution of anti-rotational and bending forces n The grooves (A) ensure proper seating of the Straumann abutment n The cylinder connection supports mechanical stability Square-shaped connection No cylinder to support mechanical stability No CrossFit grooves to provide a secure and precise fit with the Straumann bone-level implant 9

TISSUE LEVEL CROWN Description REGULAR NECK Final / COPING 048.601/ 048.633-gold RN synocta 1.5 abutment or 048.229-plastic/ 048.010-short/ 048.017V4 048.124 048.090-long & 048.070V4 RN synocta Gold abutment 048.642 048.668 RN synocta 15 A 048.610/048.676V4 / RN synocta 15 B RN synocta 20 A 048.651 048.611/048.676V4 / 048.612/048.676V4 / Screw Retained RN synocta 20 B RN synocta 15 A RN synocta 15 B RN synocta 20 A 048.010-short/ 048.090-long 048.017V4 & 048.070V4 048.124 048.613/048.676V4 / 048.615/048.676V4 / 048.616/048.676V4 / 048.617/048.676V4 / RN synocta 20 B 048.618/048.676V4 / RN synocta transversal (TS) abutment 048.620/ 048.634-gold or 048.665-plastic/ WIDE NECK 048.603/ 048.639-gold WN synocta 1.5 abutment/coping or 048.667-plastic/ 048.013 048.091 048.171 048.233 & 048.095 WN synocta Gold abutment 048.644 10

TISSUE LEVEL CROWN (continued) Description REGULAR NECK Final / RN Solid abutment All-In-One set, 4.0 mm 040.740 RN Solid abutment All-In-One set, 5.5 mm 040.741 RN Solid abutment All-In-One set, 7.0 mm 040.742 RN Solid abutment, 4.0 mm/ 048.017V4/048.060V4 or 040.381 048.160 048.655 048.540/ 048.245-plastic CEMENT Retained RN Solid abutment, 5.5 mm/ RN Solid abutment, 7.0 mm/ RN synocta cementable 5.5/ RN synocta 15 A Plastic shoulder RN synocta 15 B Plastic shoulder RN synocta 20 A Plastic shoulder RN synocta 20 B Plastic shoulder RN synocta 15 A Plastic shoulder RN synocta 15 B Plastic shoulder RN synocta 20 A Plastic shoulder RN synocta 20 B Plastic shoulder 048.010-short/ 048.090-long 048.017V4/048.061V4 or 040.383 048.017V4/048.062V4 or 040.382 048.017V4 & 048.070V4 048.161 048.655 048.162 048.655 048.124 048.541/ 048.245-plastic 048.542/ 048.245-plastic 048.605/ 048.663 048.610/ 048.676V4 048.611/ 048.676V4 048.612/ 048.676V4 048.613/ 048.676V4 048.615/ 048.676V4 048.616/ 048.676V4 048.617/ 048.676V4 048.618/ 048.676V4 RN synocta Meso abutment 048.560 Straumann CADCAM abutment, ZrO 2 Straumann CADCAM abutment, Ti 048.651 048.668 RN synocta gold abutment, crown 048.642 11

WIDE NECK Description Final WN Solid abutment All-in-One set, 4.0 mm 040.745 WN Solid abutment All-in-One set, 5.5 mm 040.746 CEMENT Retained WN Solid abutment, 4.0 mm/ WN Solid abutment, 5.5 mm/ WN synocta cementable abutment, H 5.5 mm WN synocta 15 A 048.013/048.065 or 040.380 048.013/048.066 or 040.384 048.165 048.657 048.166 048.657 048.545/048.247-plastic 048.546/048.247-plastic 048.606/ 048.243 048.608/ 048.678 WN synocta 15 B 048.609/ 048.678 WN synocta Gold abutment 048.644 048.091 048.013 & 048.095 048.171 048.233 WN synocta Meso abutment 048.561 Straumann CADCAM abutment, Ti 12

TISSUE LEVEL BRIDGE Description REGULAR NECK Final / COPING RN synocta 1.5 abutment/ 048.601/ 048.632-gold or 048.227-plastic RN synocta 15 A 048.610/048.676V4 RN synocta 15 B 048.611/048.676V4 Screw Retained RN synocta 20 A RN synocta 20 B RN synocta 15 A RN synocta 15 B RN synocta 20 A 048.010-short/ 048.090-long 048.017V4 & 048.070V4 048.124 048.650 048.612/048.676V4 048.613/048.676V4 048.615/048.676V4 048.616/048.676V4 048.617/048.676V4 RN synocta 20 B 048.618/048.676V4 WIDE NECK WN synocta 1.5 abutment/ 048.091 048.013 & 048.095 048.171 048.234 048.603/ 048.638-gold or 048.666-plastic 13

Description REGULAR NECK Final / COPING RN synocta 1.5 abutment/ 048.010-short/ 048.090-long 048.017V4 & 048.070V4 048.124 048.651 or 048.668 048.601/ 048.633-gold or 048.229-plastic RN Solid abutment All-In-One set, 4.0 mm 040.840 RN Solid abutment All-In-One set, 5.5 mm 040.841 RN Solid abutment All-In-One set, 7.0 mm 040.842 RN synocta Gold abutment 048.010-short/ 048.090-long 048.017V4 & 048.070V4 048.124 048.668 048.642 RN synocta 5.5 abutment 048.605 048.651 RN Meso abutment 048.560 RN synocta abutment 15 A 048.610/048.676V4 CEMENT Retained RN synocta abutment 15 B RN synocta abutment 20 A RN synocta abutment 20 B RN synocta abutment 15 A RN synocta abutment 15 B RN synocta abutment 20 A 048.010-short/ 048.090-long 048.017V4 & 048.070V4 048.124 048.611/048.676V4 048.612/048.676V4 048.613/048.676V4 048.615/048.676V4 048.616/048.676V4 048.617/048.676V4 RN synocta abutment 20 B 048.618/048.676V4 WIDE NECK WN Solid abutment All-in-One set, 4.0 mm 040.845 WN Solid abutment All-in-One set, 5.5 mm 040.846 WN synocta 1.5 abutment/ 048.603/ 048.639-gold or 048.667-plastic WN synocta cementable abutment/ 048.606/048.244-plastic WN synocta cementable abutment 15 A/ WN synocta cementable abutment 15 B/ 048.091 048.013 & 048.095 048.171 048.233 048.608/048.678-plastic 048.609/048.678-plastic WN synocta Gold abutment 048.644 WN synocta Meso abutment 048.561 14

TISSUE LEVEL REMOVABLE Description REGULAR NECK Final RN synocta 1.5 abutment/ 048.010-short/ 048.090-long 048.093V4 048.108 048.650 048.601/ 048.632-gold/ 048.227-plastic/ 048.204-gold or 048.214-Ti BAR Connection bars Dolder bar, mini/matrix 048.411/048.413 Dolder bar, regular/matrix 048.412/048.414 WIDE NECK WN synocta 1.5 abutment/ 048.091 048.013 & 048.095 048.171 048.234 048.603/ 048.638-gold or 048.666-plastic REGULAR NECK RETENTIVE ANCHOR Retentive Anchor abutment Components for denture Elliptical matrix 048.456 Ti matrix 048.450 048.109 048.439 Gold matrix 048.410 15 Dolder is a registered trademark of Prof. Eugen Dolder, former director of the School of Dentistry at the University of Zurich.

Description REGULAR NECK RN LOCATOR, AH 1.0 mm Final 048.175 RN LOCATOR, AH 2.0 mm 048.176 RN LOCATOR, AH 3.0 mm 048.177 RN LOCATOR, AH 4.0 mm 048.197V4 048.198V4 048.178 RN LOCATOR, AH 5.0 mm 048.179 RN LOCATOR, AH 6.0 mm 048.180 WIDE NECK WN LOCATOR, AH 1.0 mm 048.183 WN LOCATOR, AH 2.0 mm 048.184 LOCATOR WN LOCATOR, AH 3.0 mm 048.185 048.197V4 048.198V4 WN LOCATOR, AH 4.0 mm 048.186 WN LOCATOR, AH 5.0 mm 048.187 Components for denture LOCATOR male processing package 048.189V2 Clear, 5 lbs 048.190V4 Pink, 3 lbs 048.191V4 Blue, 1.5 lbs 048.192V4 LOCATOR male processing package, extended range 048.182V2 Green, 3 4 lbs 048.193V4 Orange, 2 lbs 048.188V4 Red, 1.5 lbs 048.194V4 048.198V4 Grey, 0 lbs 048.181V4 coping 048.197V4 Block-out spacer 048.196V20 Processing male 048.195V4 Processing Spacer 048.218V4 Holder 046.413V4 16 LOCATOR is a registered trademark of Zest Anchors, Inc.

do more with confidence Straumann delivers confidence on every level with products built on innovation, precision, reliability and simplicity supported by rigorous scientific and clinical evidence. Every Straumann dental implant and abutment is backed by our exclusive ten-year limited warranty. So look for the Certificate of Authenticity to be sure you are using genuine Straumann components. It s the mark of confidence. The value of authenticity Look-alike implant and abutment systems attempt to copy the original manufacturer s design, but cannot give assurance of equal precision or material quality. Compromises, such as a poor connection between the implant and abutment, can lead to complications. That s why practitioners should insist on genuine Straumann implants and restorative components. Manufactured: Straumann USA, 916A 113th Street, Arlington, TX cadcam.straumann.com Materials: Ivoclar Vivadent, AG Bendererstrasse 2 9494 Schaan Liechtenstein Phone: 00423 235 35 35 Fax: 00423 235 33 60 IPS e.max CAD RESTORATIONS BY STRAUMANN CADCAM Straumann certifies that IPS e.max CAD is a lithium-disilicate glass-ceramic for the CADCAM technique. Composition Elements Percentage SiO 2 57 80 % Li 2 O 11 19 % K 2 O 0 13 % P 2 O 5 0 11 % ZrO 2 0 8 % ZnO 0 8 % Others + coloring oxides 0 12 % Dental Copy (attach to patient record) 700897 Straumann is a registered trademark of Straumann Holding AG or its affiliates. IPS e.max is a registered trademark of Ivoclar Vivadent, AG, Liechtenstein. All rights reserved. The Certificate of Authenticity for Straumann implants is sent by the surgeon to the restorative doctor indicating that the surgeon has placed a genuine Straumann implant. The Straumann Lab Authenticity sticker is sent by the restorative doctor to the lab to request that only genuine Straumann components are used for the restoration. The CADCAM Materials Authenticity sticker certifies the composition of each Straumann CADCAM element for its corresponding restoration. It is sent to the dental lab from the milling center with the Straumann abutment, coping or framework. www.straumann.com International Headquarters Institut Straumann AG Peter Merian-Weg 12 CH-4002 Basel, Switzerland Phone +41 (0)61 965 11 11 Fax +41 (0)61 965 11 01 Straumann USA Straumann USA, LLC 60 Minuteman Road Andover, MA 01810 Phone 800/448 8168 978/747 2500 Fax 978/747 2490 www.straumannusa.com Straumann Canada Straumann Canada Limited 3115 Harvester Road, Suite 100 Burlington, ON L7N 3N8 Phone 800/363 4024 905/319 2900 Fax 905/319 2911 www.straumann.ca Straumann USA, LLC 2010. All rights reserved. Straumann and/or other trademarks and logos from Straumann that are mentioned herein are the trademarks or registered trademarks of Straumann Holding AG and/or its affiliates. All rights reserved. Straumann products are CE marked 8/10 USLIT 330