Sales ENERCON GmbH Dreekamp 5 2665 Aurich Germany Phone +49 494192 7 Fax +49 4941 92 71 9 vertrieb@enercon.de E-33 E-44 E-48 E-53 E-7 E-82 ENERCON WIND TURBINES PRODUCT OVERVIEW ENERCON GmbH Dreekamp 5 2665 Aurich Germany Phone +49 4941 92 7 Fax +49 4941 92 71 9 www.enercon.de Subject to change without notice, status 3/9
TECHNICAL DATA 33 kw diameter: 33.4 m 37 m 5 m IEC/NVN I and IEC/NVN II (depending on hub height) Upwind rotor with active pitch P [kw] coefficient Cp [ ] 35 3 25.6.5.4 2.3 15.2 1 5 P coefficient Cp Swept area: 876 m 2 Variable, 18 45 rpm Single-row cylindrical roller bearings Wind P coefficient Cp 1. 2. 3 5..35 4 13.7.4 5 3..45 6 55..47 7 92..5 8 138..5 9 196..5 1 25..47 11 292.8.41 12 32..35 13 335..28 14 335..23 15 335..18 16 335..15 17 335..13 18 335..11 19 335..9 2 335..8 21 335..7 ENERCON s E-33 wind turbine makes it economically feasible to realise wind energy projects even at sites difficult 22 335..6 to access. Their modular design allows for convenient container transport by ship and truck as well as efficient installation using one regular-sized lifting crane. 23 335..5 24 335..5 25 335..4 2 3
TECHNICAL DATA diameter: 9 kw 44 m 45 m / 55 m IEC/NVN I A Upwind rotor with active pitch 1, 9 8 7 6 5 4 3 2 1 P [kw] coefficient Cp [ ].6.5.4.3.2 P coefficient Cp Swept area: 1,521 m 2 Variable, 12 34 rpm Single-row cylindrical roller bearings Wind P coefficient Cp 1. 2 1.4.19 3 8..32 4 24.5.41 5 53..46 6 96..48 7 156..49 8 238..5 9 34..5 1 466..5 11 6..48 12 71..44 13 79..39 14 85..33 15 88..28 16 95..24 17 91..2 18 91..17 19 91..14 2 91..12 21 91..11 Developed as a strong-wind system for the international market, the E-44 wind turbine sets the benchmark in the 22 91..9 medium power range. As all other ENERCON wind turbines, the E-44 is also provided with ENERCON s efficient rotor blade design. With a rated power of 9 kw, maximum use is made of prevailing winds at strong wind sites. 23 91..8 24 91..7 25 91..6 4 5
ENERCON s E-48 wind turbine is yet another success story in the company s medium class power range. With a rated power of 8 kw and a sophisticated rotor blade design, the E-48 wind turbine is the most profitable system within its class. Together with a choice of different tower versions up to 76 m, the E-48 offers an economically sound solution to complex sites worldwide. TECHNICAL DATA 8 kw diameter: 48 m 5 m 76 m IEC/NVN II Upwind rotor with active pitch Swept area: 1,81 m 2 Variable, 16 3 rpm Single-row cylindrical roller bearings 8 7 6 5 4 3 2 1 P [kw] coefficient Cp [ ] P Wind P coefficient Cp 1. 2 2..23 3 12..4 4 32..45 5 66..48 6 12..5 7 191..5 8 284..5 9 45..5 1 555..5 11 671..45 12 75..39 13 79..32 14 81..27 15 81..22 16 81..18 17 81..15 18 81..13 19 81..11 2 81..9 21 81..8 22 81..7 23 81..6 24 81..5 25 81..5 coefficient Cp.6.5.4.3.2 6 7
Developed for sites with medium wind speeds, the ENERCON E-53 wind turbine s expanded rotor diameter and newly designed rotor blades guarantee maximum yield even at low wind speeds. TECHNICAL DATA 8 kw diameter: 52.9 m 6 m / 73 m IEC/NVN S (v av = 7.5 m/s, v ext = 57 m/s) Upwind rotor with active pitch Swept area: 2,198 m 2 Variable, 12 29 rpm Single-row cylindrical roller bearings 8 7 6 5 4 3 2 1 P [kw] coefficient Cp [ ] P Wind P coefficient Cp 1. 2 2..19 3 14..39 4 38..44 5 77..46 6 141..48 7 228..49 8 336..49 9 48..49 1 645..48 11 744..42 12 78..34 13 81..27 14 81..22 15 81..18 16 81..15 17 81..12 18 81. 19 81..9 2 81..8 21 81..6 22 81..6 23 81..5 24 81..4 25 81..4 coefficient Cp.6.5.4.3.2 8 9
TECHNICAL DATA diameter: 2,3 kw 71 m 57 m 113 m IEC/NVN I and IEC/NVN II (depending on hub height) Upwind rotor with active pitch 2,4 2,2 2, 1,8 1,6 1,4 1,2 1, 8 6 4 2 P [kw] coefficient Cp [ ].5.4.3.2 Swept area: 3,959 m 2 P coefficient Cp Variable, 6 21.5 rpm Wind P coefficient Cp 1. 2 2. 3 18..27 4 56..36 5 127..42 Dual-row tapered/single-row cylindrical 6 24..46 roller bearings 7 4..48 8 626..5 9 892..5 1 1,223..5 11 1,59..49 12 1,9..45 13 2,8..39 14 2,23..34 15 2,3..28 16 2,31..23 17 2,31..19 18 2,31..16 19 2,31..14 2 2,31..12 21 2,31. With the E-7 wind turbine ENERCON continues its longstanding reputation for reliability in the 2 MW class. Especially suitable for sites with high wind speeds, the E-7 wind turbine with 2.3 MW rated power and numerous steel and precast concrete tower versions is designed to ensure maximum yield in the upper power range. 22 2,31..9 23 2,31..8 24 2,31..7 25 2,31..6 1 11
TECHNICAL DATA 2,2 P [kw] coefficient Cp [ ] 2, kw 2, 1,8.5 diameter: 82 m 1,6.4 78 m 138 m IEC/NVN II 1,4 1,2 1,.3 8 6 4 2.2 Upwind rotor with active pitch Swept area: 5,281 m 2 P coefficient Cp Variable, 6 19.5 rpm Wind P coefficient Cp 1. 2 3..12 3 25..29 4 82..4 Dual-row tapered/single-row cylindrical 5 174..43 roller bearings 6 321..46 7 532..48 8 815..49 9 1,18..5 1 1,612..5 11 1,89..44 12 2,..36 13 2,5..29 14 2,5..23 15 2,5..19 16 2,5..15 17 2,5..13 18 2,5..11 19 2,5..9 2 2,5..8 21 2,5..7 Specially designed for medium wind speeds, the ENERCON E-82 wind turbine with the new rotor blade design and tower versions up to 138 m hub height guarantees excellent yields in the 2 MW category, even at inland sites. 22 2,5..6 23 2,5..5 24 2,5..5 25 2,5..4 12 13
Diagram 1 Diagram 2 P rated P rated V 1 V 2 V 4 V 3 Wind speed V 1 V 2 V Sturm Wind speed curve of a wind turbine without ENERCON storm curve of a wind turbine with ENERCON storm ENERCON POWER CURVES According to current standards at power curve measurement certain parameters such as turbulence intensity are not taken into consideration. The results are deviating measurements on the same type of wind turbine at different locations. Also when comparing yield using power curve measurements from different types of wind turbines, a clear picture cannot be obtained unless all measurement parameters are taking into consideration. So in order to calculate power yield forecasts for its wind turbines, ENERCON does not use power curve measurements but calculated power curves. These are based on the following: several different power curve measurements for the respective wind turbine type taken by accredited institutes with documented evidence of these measurements on the respective power curve certificates; or results from other turbine types if measurements have not yet begun or are still in progress average turbulence intensity 12 % standard air density 1.225 kg/m 3 realistic assumptions concerning anemometer behaviour wind turbine operation with ENERCON s storm feature which enables operation without shutdown at high wind speeds. Thus the power curves for ENERCON wind turbines provide highly reliable and realistic calculations for expected energy yield according to the wind conditions at the respective site. ENERCON STORM CONTROL ENERCON wind turbines are operated with a special storm feature. This system enables reduced turbine operation in the event of extremely high wind speeds, and prevents the otherwise frequent shutdowns and resulting yield losses. curve without ENERCON storm The diagram 1 shows that the wind turbine stops at a defined shutdown speed V 3. The reason being that a specified maximum wind speed has been exceeded. In the case of a wind turbine without storm this, for example, occurs at a wind speed of 25 m/s within the 2 second mean. The wind turbine only starts up again when the average wind speed drops below the shutdown speed or a possibly even lower restart speed (V 4 in the diagram; socalled strong wind hysteresis). In gusty wind conditions there may be a longer delay, which means that considerable yield losses are incurred. curve with ENERCON storm The power curve diagram with ENERCON storm (diagram 2) demonstrates that the wind turbine does not shut down automatically when a certain wind speed V Storm is exceeded, but merely reduces the power output by lowering the rotational speed. This is achieved by turning the rotor blades slightly out of the wind. Once the wind speed drops, the blades turn back into the wind, and the turbine immediately resumes operation at full power. Yield-reducing shutdown and start-up procedures are thus avoided. DESCRIPTION WIND CLASSES IEC I V av = 1 m/s V ext = 7 m/s IEC II V av = 8.5 m/s V ext = 59.5 m/s IEC S V av and V ext to be determined by the manufacturer 14 TRADEMARK NOTE ENERCON, Energy for the world, the ENERCON logo and the green tower shades are registered trademarks 15 Cert no. GFA-COC-1611 of ENERCON GmbH.