www.messko.com Product Overview Messko
1911 Dr. Albert Hauser founds the fine mechanical institute for precision scales and weights. He produces scales for laboratories, the precious metals industry and colleges which offer extreme measuring precision. 1925 Bourdon Spring At the early years the production was focused to manufacture radiator thermometers and pressure gauges for motor vehicles. In 1932 Messko developed the first thermometer with a Bourdon Spring. Today this reliable application is still the basis for Messko thermometers. 1935 The brand name Messko Hauser is created from the German words for measuring and monitoring. It was entered and protected as a trademark. Messko celebrates huge success with measuring instruments for the automotive industry. essko dedicated to performance 1960 First Transformer Thermometer Messko successfully opens a new market with the development of the first measuring instruments for transformer engineering. The foundation for a whole series of measuring instruments for power supply companies is created. Messko 1999 Subsidiary of MR Messko becomes the subsidiary of MR Maschinenfabrik Reinhausen. This strong partnership makes Messko one of the primary suppliers of measuring instruments for utility companies and industries worldwide. 2008 New facility Messko moved to the new large facility in Oberursel, Germany. All thermometers, oil level indicators, pressure relief devices and dehydrating breathers are produced here.
Level Oil Level Indicators No spill wanted OLI MTO-STF Up to three switching contacts Radial/axial drive shaft models Laminated safety glass with sunshine protection (UV filter) Integrated remote transmission (TT) (RS 485 interface) Integrated digital signal Extra indicator devices, for improved legibility at eye level (EI models) Analog output signals (0 1 ma, 0 20 ma or 4 20 ma) MTO-STF/TT MTO-STF RM Monitoring of the oil level in the expansion vessel (conservator with or without rubber bag) Pump control during transformer filling process 160 mm model for distribution and power transformers Remote indication (EI 100/160) for bigger transformer MMK retrofit solution for conventional glass indicators MMK oil level indicator without float mounting inside the expansion vessel (conservator) EI 100 Product description Magnetic oil level indicators are used for measuring the oil level in the expansion vessel (conservator) of transformers. Oil leakage from the expansion vessel is safely prevented by the separate arrangement of sensor element and display element EI 100/160 OLI at a glance Extremly long-lived and functionally reliable Adjustable scales or fixed switching contacts Customized scales and float lengths No need of re-adjustment and/or recalibration during lifetime Integrated remote indication MMK
Temperature TRASY2 Thermometer Series Modularity has a name TRASY2 MT-STW160F2 MT-ST160F Thermometer pocket EN 50216-4 Thermo well Oil and winding temperature ( 20 to + 140 C and 0 to +160 C) Thermal image of the winding temperature Measured value remote transmission, PT 100, Cu10, 4 to 20 ma Installation in thermometer pocket acc. to EN 50216-4 Up to 6 switching contacts Bourdon tube measuring system Laminated safety glass with sunshine protection (UV-filter) Combi well Product description: Pointer thermometer are used to indicate oil and winding temperature. They always consist of a temperature sensor which is connected to the measuring device (Bourdon spring) with a capillary tube. The measuring device is equipped with a pointer which turns to show the temperature on a scale. ZF-F2 Medium and large distribution transformers, power transformers, reactors or similar equipment Oil and winding temperature indication Pump/fan control, alarm, trip Remote transmission of oil and winding temperature TRASY2 at a glance Extremely long-lived and functionally reliable Two redundant measuring points in combination with Combi well or winding temperature sensor ZT-F2 (modular-type system) Quick and easy gradient setting with fixed resistors (thermal image) Ambient temperature compensation even for extreme environments In combination with the signal converter: analog signals: 0... 1 m A; 0... 20 m A, 4... 20 m A, 0 5 V, etc. relay output digital signals: RS 485 No need of readjustments and/or re-calibration for entire lifetime Vibration-proof and outdoor-proof Multi-Ballast Transformer
Temperature Compact Thermometer Series MT-ST160SK Compactness has a name COMPACT MT-ST160WR MT-ST160RM Oil and winding temperature ( 20 to + 140 C and 0 to +160 C 0 to + 120 C and 0 to + 180 C) Thermal image of the winding temperature Measured value remote transmission, 4 to 20 ma Installation in different thermometer bags possible (adapter screw connection) Up to 6 switching contacts Bourdon tube measuring system Laminated safety glass with sunshine protection (UV filter) MT-ST160SK/TT Product description: Pointer thermometer are used to indicate oil and winding temperature. They always consist of a temperature sensor which is connected to the measuring device (Bourdon spring) with a capillary tube. The measuring device is equipped with a pointer which turns to show the temperature on a scale. MT-ST160WR/TT Medium and large distribution transformers, power transformers, reactors or similar equipment Oil and winding temperature monitoring Pump/fan control, alarm, trip Remote transmission of oil and winding temperature Retrofit solution for old measuring systems with different thermometer pockets/threads Compact at a glance Extremely long-lived and functionally reliable Vibration-proof and outdoor-proof Easy to install and commission Oil & winding temperature remote indication without additional devices Ambient temperature compensation even for extreme environments Output signal: 4... 20 ma In combination with the signal converter: analog signals: 0... 1 m A; 0... 20 m A, 4... 20 m A, relay output digital signals: RS 485 No need of readjustments and/or re-calibration for entire lifetime Multi-Ballast Transformer
Temperature Digital Thermometer MTeC EPT 202 Rail mounting The all-rounder MTeC OL/CT Module Oil and winding temperature (-40 to +180 C) indication Integrated oil level monitoring and up to 3 winding temperatures (EPT 202 OL/CT) Cooler control in accordance with IEC 60076-7 and ANSI Various analog output signals for oil- and winding temperature and oil level Up to 12 switching contacts Interfaces USB/RS485; RJ45 socket; fiber optic connector (EPT202 IM) Wide range power supply 100 VAC 240 VAC, 50 400 Hz; 100 353 VDC Rail, Flush panel and 19 Sub-rack mounting IM Module EPT 202 OL/CT Flush Panel mounting Pump/fan control, alarm, trip Temperature monitoring, water/oil and air/oil cooling Monitoring sensor (OLTC, transformer) Medium and large distribution transformers, power transformers External communication with the network protocols of the transformer substations Product description: An examination of the ageing behaviour of the insulation system of transformers and therefore the service life in particular shows that these are largely dependent on the temperature in the winding. The new MTeC -EPT202 equipment generation (digital thermometer with load-dependent fan control) combines a number of functions for monitoring the temperature of transformers. MTeC at a glance Measurement/display of the temperature of the oil and 1 to 3 windings Oil level display for on-load tap-changer and transformer oil conservator Intelligent (cooling type- and load-dependent) cooling stage activation Cyclic (periodical) cooling stage activation Fan running alternation to equalize operation time of the fans Calculation of residual service life in line with international standards Remote transmisson of the measured values Targeted monitoring and reduction of thermal load of transformer Extensive visualization software Modular structure MTeC -EPT202 Modular structure Top oil temperature PT 100 4 20 ma Analog Oil temperature, winding temperature CT phase 1 EPT 202 SCADA Digital Parameter OL/CT Oil level Analog OL CT Extensionmodules Oil level CTphases 2 and 3 IM
Temperature Thermometers for distribution transformers and industrial applications Temperature measurement on the distribution side MDiT Variable temperature ranges Up to four switching contacts Bourdon tube measuring system Installation in different thermometer pockets possible (adapter screw connection) Medium: Oil, water, cooling fluid, etc. Variable sensor lengths Variable scales New series in 2009 KLKG-F80 E MTA-F80 E MTG-F80 E Reliable temperature measurement on industrial applications Smart-IN KLKA-F80 E MTS 80 Small and medium distribution transformers Pump/fan control, alarm, trip Turbines, generators and compressors Die-casting machines Automotive industry Emergency power units MTW 60
Pressure Pressure Relief Device MPreC The new security MPreC LMPRD with terminal box LMPRD with terminal box and semaphore LMPRD with terminal box (without cover) Full protection against environmental influences Clear and reliable signals 100 % foot step protection Pressure range: 6 to 30 psi (0.41 to 2.07 bar) Up to two switching contacts Oil-directed cover and/or semaphore Cable gland, terminal box or ANSI/Westinghouse connection Used Material: Stainless steel, seawater resistant aluminium and synthetic coated spring steel LMPRD with terminal box oil directed Medium and large distribution transformers, power transformers On-load tap-changer head Product description: Pressure relief devices are protecting transformers against inadmissible and unsafe pressure surges. Once a specific predetermined degree of pressure has been reached, the pressure relief device will open, reduce the pressure, and tightly reseal itself after achieving the required reduction in pressure. MPreC at a glance Selected material Quality you can feel Response time within 2 ms Pressure protection in the hartest environments No leakage problems No erroncous releases and fatigue failure Clear signaling without back slide Computer controlled release test incl. test report Helium leakage test LMPRD oil directed with mounting flanges Test report
Moisture Maintenance Free Breather MTraB Watch your cost dry up MTraB Expansion vessel (conservator) of medium and large power transformers Expansion vessel (conservator) of on-load tap-changers Expansion vessel (conservator) of arc suppression coils Industrial applications DB100-T Sensor-controlled heating system (condition/time) Output of the air temperature via analog output Self-monitoring with remote output control system Full protection against environmental influences LED indication of the current status Measured values can be called up through a RS485 interface Product description: In normal operation the air flowing to the oil conservator has to pass the silica gel and is dried on the way. The humidity of the air in the pipe line is continually measured by a moisture sensor and the results are sent to the electronic controller. DB200-T When the humidity of the air in the pipe line exceeds a selected value, this is a sign that the silica gel is unable to absorb any more moisture. In this case the self-regulating heating element inside the silica gel container is activated. The water vapor that escapes from the silica gel condenses on the specially shaped bottom casting and drips out of the filter-system. MTraB at a glance Extensive economies, as you leave out maintenance interventions and desiccant replacements (Asset management) Increasement of operating reliability for your transformers and on-load tap-changers Reduction of life-cycle costs No pollution and disposal problems with the used-up desiccant Easy replacement (Retrofit) DB200RM D-T-HT
Accessories Accessories Sensors/Signal converters/indicators Signal converter with analog and digital outputs (Pt-MU, IgT-MU, TT 30) Analog and digital indication of measured values in C, %, etc. Digital temperature transmitter with RS 485 interface (TT-PWM 60) Power supply units (PSLC 242, SNT 36) PT 100 IgT-MU Pt-MU Control rooms Transformer Cabinet Medium and large distribution transformer Power transformer EI 100/160 PQ 96 D1272-AT
MR Group Product Range Transformer Control Power Composites Reinhausen Plasma OLTC type VACUTAP OLTC type OILTAP OCTC type DEETAP OCTC type COMTAP ARS Accessoires Motor Drives TAPMOTION Measuring Devices (Messko) Voltage Regulators TAPCON 230, 240, 250, 260 Spare parts Asset Management Monitoring TAPGUARD 240, 260 Technical Service Training ReCoTec hollow composite insulators ROTAFIL FW-Tubes Cold.Coating PC1 piezobrush plasma hand-held device PlasEt catalytic plasma plasmabrush PB1. PB2 plasmabar PB-B1 RPL-200, RPL-300 laboratory equipment RPA automation plant Messko HIGHVOLT (HV) Power Quality Management Oil level indicators (MTO, MMK) Mechanical pointer thermometers (Compact, TRASY2, MDiT) Digital thermometers (MTeC EPT202) Sensors, signal converters and indication devices MPreC (Pressure relief devices) MTraB (Maintenance-free dehydrating breathers) Cargolog (Impact recorders) Electrostatic Filters Modular HV-Generators Testing Equipment Reactive Power Compensation and Filter Circuits (a.o. POCOS ) Dynamic Compensation (System Solutions) Network Analyses, Studies Measuring Equipment and Reactive Power Regulators L.V. regulating plants and active filters
www.messko.com Messko GmbH Gewerbegebiet An den Drei Hasen Messko-Platz 1 61440 Oberursel, Germany Phone +49 (0)61 71 63 98-0 Fax +49 (0)61 71 63 98-98 info@messko.com We are Close to our Customers GERMANY Maschinenfabrik Reinhausen GmbH Falkensteinstrasse 8 93059 Regensburg, Germany Phone +49 941 4090 0 Fax +49 941 4090 111 Maschinenfabrik Reinhausen GmbH Servicepoint Dortmund Dortmunder Feld 51 44147 Dortmund, Germany Phone +49 231 863 3946 Fax +49 231 863 3947 Maschinenfabrik Reinhausen GmbH Power Quality Management Alte Chaussee 73 99102 Erfurt-Waltersleben, Germany Phone +49 361 3010 30 Fax +49 361 3010 320 MESSKO GmbH Gewerbegebiet An den Drei Hasen Messko-Platz 1 61440 Oberursel, Germany Phone +49 6171 6398 0 Fax +49 6171 6398 98 Maschinenfabrik Reinhausen GmbH Power Quality Management Niederspannung / Low Voltage Wiebestr. 42-46, 10553 Berlin, Germany Phone +49 30 330 915-0 Fax +49 30 330 915-25 HIGHVOLT Prüftechnik Dresden GmbH Marie-Curie-Strasse 10 01139 Dresden, Germany Phone +49 351 8425 648 Fax +49 351 8425 679 ITALY Reinhausen Italia S. r. l. Via Alserio, 16 20159 Milan, Italy Phone +39 2 6943 471 Fax +39 2 6943 4766 RUSSIA OOO MP Kasatschij pereulok 5/2 Building 1 109017 Moscow, Russia Phone +70 495 234 4115 Fax +70 495 234 4116 PEOPLES REPUBLIC OF CHINA MR China Ltd. No. 360, South Pu Dong Road Room E, 4th floor, Pudong New District Shanghai PC 200120, Peoples Republic of China Phone +86 21 6163 4500 Fax +86 21 6163 4521 USA Reinhausen Manufacturing Inc. 2549 North 9th Avenue Humboldt, Tennessee 38343, USA Phone +1 73 1784 7681 Fax +1 73 1784 7682 BRAZIL MR do Brasil Indústria Mecánica Ltda. Av. Elias Yazbek, 3035 06800 Embu São Paulo, Brazil Phone +55 11 4785 2171 Fax +55 11 4785 2185 U.A.E. Reinhausen Middle East FZW P.O. Box 62425 United Arab Emirates, Dubai Phone +971 4 329 1079 Fax +971 4 332 8706 SOUTH AFRICA Reinhausen South Africa (Pty.) No. 15, Third Street Booysens Reserve Johannesburg, South Africa Phone +27 11 835 2077 Fax +27 11 835 3806 INDIA Easun-MR Tap Changers (P) Ltd. 612, M.T.H. Road Tiruninravur 602024, Chennai India Phone +91 4 4639 0863 Fax +91 4 4639 0881 Easun-MR Tap Changers (P) Ltd. 20/5, Perumal Koil Street, Tirubuvanai 605107 Pondicherry, India Phone +91 4 13290 7631 Fax +91 4 13264 1836 JAPAN MR Japan Corporation Germany Center, Hakusan High-tech Park, 1-18-2 Hakusan, Midori-ku, Yokohama, 226-0006 Japan Phone +81-(0)45-929-5728 Fax +81-(0)45-929-5741 AUSTRALIA Reinhausen Australia Pty. Ltd. 6 10 Geeves Avenue, Ground Floor Rockdale NSW 2216, Australia Phone +61 2 9556 2133 Fax +61 2 9597 1339 MALAYSIA Reinhausen Asia-Pacific Sdn. Bhd. Level 11 Chulan Tower No. 3 Jalan Conlay 50450 Kuala Lumpur, Malaysia Phone +60 321 426 481 Fax +60 321 426 422 Important note: The information contained in all of our publications may differ in detail from the actual equipment delivered. We reserve the right to make changes without notice. IN 2064/03/01 0109/3000 Art.-Nr. 990850 Printed in Germany Messko/Usa Messko