Page 1 HT Hardware November 2005 EntryFlex System Page 2 HT Hardware November 2005 1
EntryFlex Hardware Cards Cards Peripherals Encoder Door devices Locks Wall Readers Windis Programmers XPP PP Software Page 3 HT Hardware November 2005 1. EntryFlex Hardware: Cards Mag. Stripe cards Low coercity Track #3 for Onity systems High coercity Track #1 & #2 for multiple purpose Chip cards 2Kbits: 10 open 2Kbyte: 90 open 8Kyte : 400 open Proxy cards ISO 14443B 13.56 MHz Proximity technology Page 4 HT Hardware November 2005 2
EntryFlex Hardware: Encoders HT22I Insertion Encoder Read/write LO-CO cards on track #3 Compatible with any PMS system HT22M Motorized Encoder Read/write LO/HI -CO cards on track #3 Read/write CHIPcards Compatible with any PMS system HT22IP Insert+Proxy Encoder Read/write LO-CO cards on track #3 Read/write Prox cards Compatible with any PMS system HT22IP Mot+Proxy Encoder Read/write LO/HI -CO cards on track #3 Read/Write Chip cards Read/write Prox cards Compatible with any PMS system Page 5 HT Hardware November 2005 EntryFlex Hardware: Encoders HT22X Encoders Conections: HT Output A-B Format (485 signal up to 1200m) PC Connector (RS232 signal, up to 12m) 15Vdc / 1A Power Supply Modem Output On/Off Switch HT Com Output (485 signal up to 1200m) and PP Connector HT Com Output (485 signal up to 1200m) Connector for parallel printer Page 6 HT Hardware November 2005 3
EntryFlex Hardware: Encoders HT22x termination resistor for 485 signal. Used to close the circuit and stable the communication. Used when more than one encoder is connected. Resistor must be set to ON in the last peripheral. HT22x CE22 Page 7 HT Hardware November 2005 EntryFlex Hardware: Encoders HT22x Batteries: In case of a Mains power cut or fail, 6AA Size batteries can be used. These batteries will maintain the Locking Plan and the Clock. Batteries Check and Alarm on Hidden Menu. Batteries Pack Page 8 HT Hardware November 2005 4
EntryFlex Hardware: Encoders HT22x Lithium Battery: Maintains HT22i program. In order to change the Lithium Battery, Alkaline batteries must be charged and mains must be disconnected. Lithium Battery Page 9 HT Hardware November 2005 EntryFlex Hardware: Encoders EDHT22X Display brigthness regulator Page 10 HT Hardware November 2005 5
EntryFlex Hardware: Revalidator Revalidator: Used to revalidate cards (only Mag and SMART cards) Required Power Supply:. Standard Encoder Power Supply. 15V / 1,2A Page 11 HT Hardware November 2005 EntryFlex Hardware: Windis Win Distributor (H2XCMDIW): Necessary in all installations. Organizes data between the PC and the On line devices. Able to manage up to 30 on line devices up to 1200m. For more devices a repeater is needed. Page 12 HT Hardware November 2005 6
EntryFlex Hardware: Windis It is required in all the installations (no more converter cable) Page 13 HT Hardware November 2005 EntryFlex Hardware: Windis HTCom IN LED HTCom OUT LED Power LED PP Connector HTCom Output (A B format) 12Vdc Power Supply HTCom Output Repeater Connector PC Connector Page 14 HT Hardware November 2005 7
EntryFlex Hardware: Repeater Repeater connection: 4 wires are required to complete the connection between the Win Distributor and the Repeater. Repeater Connector Page 15 HT Hardware November 2005 EntryFlex Hardware: Repeater Page 16 HT Hardware November 2005 8
EntryFlex Hardware: Locks Electronic Lock. Depending on the lock, different features can be available: Page 17 HT Hardware November 2005 EntryFlex Hardware: Wall Readers Page 18 HT Hardware November 2005 9
EntryFlex Hardware: Wall Readers CA22 Off - Line Control Unit: Control unit for off - line wall readers (only one readers) Clock and Calendar. Manages up to 1000 guest cards. Records last 500 openings with 250 guest cards. Relay contact. 8 relay board connector. Page 19 HT Hardware November 2005 EntryFlex Hardware: Wall Readers Power Supply Connector Relay Contacts Electric Strike 8 Relay Board Connector Reset Button Wall Reader Relay EEPROM Unconditional Opening Wall Reader Connector Page 20 HT Hardware November 2005 10
EntryFlex Hardware: Wall Readers CE22 On Line Control Unit: On - line control unit for on - line wall readers. Controlled by PC. Anti-passback function. Mantains operations even if the communication with the PC is cut. Access control in real time. Controls cards validity, expiration, authorizations. Control up to 2 wall readers and doors. Page 21 HT Hardware November 2005 EntryFlex Hardware: Wall Readers On - line wall reader installation. Page 22 HT Hardware November 2005 11
EntryFlex Hardware: Wall Readers On - line wall reader: one reader, one door. Page 23 HT Hardware November 2005 EntryFlex Hardware: Wall Readers On - line wall reader: one door, two readers. Page 24 HT Hardware November 2005 12
EntryFlex Hardware: Wall Readers On - line wall reader: two doors, two readers. Page 25 HT Hardware November 2005 EntryFlex Hardware: Wall Readers Wall Reader Types: Vertical Readers Horizontal Readers Page 26 HT Hardware November 2005 13
EntryFlex Hardware: Wall Readers Mag. stripe WR Read Mag. Stripe Cards Send info to Control Unit Offline & Online Power : 12-24V Dual WR Read Mag. & Smart Cards Send info to Control Unit Write Smart Cards Offline& Online Power : 12V Proxy WR Read Proxy Cards Send info to Control Unit Offline& Online Power : 12V Page 27 HT Hardware November 2005 EntryFlex Hardware: Wall Readers Magnetic Wall Reader Dual & Prox Wall Reader Future aplications Reflashing conector Connection with CA22 or CE22 Clear Button Connection with H2XIO Page 28 HT Hardware November 2005 14
EntryFlex Hardware: Wall Readers LA22F Off - line horizontal wall reader: Assembled off - line control unit and wall reader. Frontal horizontal card insertion. Reads only magnetic stripe cards. 8 Relay Board Connector. Suitable for outdoors installations. Powered with 9Vdc-24Vdc. Page 29 HT Hardware November 2005 EntryFlex Hardware: Wall Readers Two ways to install LA22F: With Metal Box Flush Mounted Page 30 HT Hardware November 2005 15
EntryFlex Hardware: 8 Relay board 8 relay Board: Connections to control board Conected with control Boards Activated by authorizations Ouputs from relays Page 31 HT Hardware November 2005 EntryFlex Hardware: Portable programmer Portable Programmer (PP): Data transporter between the HT program and the locks. Updates and Initializes the locks. Obtains the audit trail from the locks. Tests locks status. Can open locks in any emergency situation. Page 32 HT Hardware November 2005 16
EntryFlex Hardware: Portable programmer Jack to transfer and receive information from locks Nine pins connector for 485 signal (Win Dist or Encoder) Display Buttons 4 Alkaline Batteries (back part) Page 33 HT Hardware November 2005 EntryFlex Hardware: Portable programmer Testing locks with PP: Tests Electronic Module, Memory and Electronic Parts. Lock type (HT24, HT28). Switches Test: Deadbolt, Handle, Privacy, Card. Using PP on Test mode, reason for rejected card can be known: - Not valid for this lock. - Expired Card. Page 34 HT Hardware November 2005 17
EntryFlex Hardware: Portable programmer Extended portable programmer (XPP): Transfers data between the front desk and the locks and /or other off-line option and vice versa Updates and initializes the locks Obtain the audit trial from the locks Locks audit trail on screen Allow to open locks in emergency cases Page 35 HT Hardware November 2005 EntryFlex Hardware: Software LOCKING PLAN GUIDE NETWORK PRACTICAL EXERCISE Page 36 HT Hardware November 2005 18
EntryFlex Network. Insert the flag USEIPCOM in flag.ht2 file Share the data folder from the Server All the options in security data folder Insert the Encoders in the Locking plan Select the encoder in each station Page 37 HT Hardware November 2005 EntryFlex Network. Share the data folder from the Server All the options in security data folder Insert one Encoder in the Locking plan OR Insert 3 encoders and use USEIPCOM flag Page 38 HT Hardware November 2005 19
EntryFlex Locking plan guide. Steps: 1.- General Configuration (TOOLS / GENERAL CONFIGURATION / CONFIGURATION) 2.- Cards (DATA / GENERAL CONFIGURATION/ CARDS) 3.- Areas (DATA / AREAS) 4.- Hardware Types (DATA / HARDWARE TYPES ) 5.- Doors (DATA / DOORS ) 6.- Users (DATA / USERS ) 7.- Locking Plan (DATA / LOCKING PLAN) 8.- Encoders (TOOLS / GENERAL CONFIGURATION) 9.- Calendar (DATA / CALENDAR) 10.- Timetables ( DATA / TIMETABLES ) 11.- Operators ( SECURITY / OPERATORS ) Page 39 HT Hardware November 2005 Page 40 HT Hardware November 2005 20
Page 41 HT Hardware November 2005 21