KR25i HIGH SPEED, HIGH CAPACITY REFRIGERATED CENTRIFUGE AUTO-LOCK CQCS Traceability System VIDEOset Display!
A CENTRIFUGE FOR ALL YOUR HIGH SPEED APPLICATIONS CLINICAL BIOLOGY, RESEARCH, INDUSTRY The KR25i accepts all tubes from 1.5 ml to 500 ml for all types of high speed applications (up to 63,400 x g*) : Subcellular fractionation - Protein separation - Cell and virus recovery - Nucleic acid separation... Rotor exchange in 10 secondes AUTO-LOCK AUTO-LOCK makes the KR25i the first centrifuge in its class on which the rotors can be changed so easily, in absolute safety and in record time. Exchanging a 6 x 500 ml rotor for an 8 x 50 ml or a 4 x 100 ml (swing-out) is carried out in under 10 seconds! BENEFITS A choice of 9 angle and swing-out rotors : 32 x 16 ml, 8 x 50 ml conical, 8 x 50 ml, 14 x 50 ml, 8 x 100 ml, 6 x 250 ml, 6 x 500 ml, 4 x 100 ml (up to 63,400 x g). AUTO-LOCK : new rotor mounting system locks the rotor onto the drive for absolute security in centrifugation. Record rotor exchange time - under 10 seconds. VIDEOset graphic control system for instant understanding of operation. Lifetime guarantee of reproducibility from run-to-run with the High Reproducibility Factor (integral). Holds low temperature at high speed with its TFT system. AUTO-LOCK : Instant rotor exchange CQCStm traceability system for samples, centrifuge and operators. * KR25i with AKL50.22 (8 x 50 ml) rotor.
The KR25i complies fully with the most exacting international standards concerning safety in centrifugation : EN 1010-2-020 - imbalance detection and shutdown, lid interlock,armour plating,automatic rotor detection, auto-diagnostics The KR25i is the first centrifuge in its category to be fitted with the AUTO-LOCK system : - For maximum security when mounting rotors with or without lid. - For rapid fitting and removal of rotors without the use of any tools. MAXIMUM SECURITY ABSOLUTE CONTROL Excellent maintenance of sample temperature and optimized heat exchange are assured by the patented TFT (Thin Film Technology) cooling systems with refrigerant fluid totally integrated within the wall and the bowl. With its pre-cool function (4 C/2000 rpm/15 min) the KR25i is always ready to keep the samples cool. Centrifugal acceleration (x g) Time duration Temperature compensation eliminates the usual differences between sample of bowl temperatures. For a higher quality of separation : Microprocessor control of all parameters. Allowance for sample radius to achieve true g force. Choice of 100 run profiles to match the sample needs (10 acceleration and 10 braking rates). Separation reproducibility guaranteed : High Reproducibility Factor ensures that the same total force is applied to the samples from run to run, whatever the rotor, load, fluctuating mains voltage ) Equivalent separations at different g
SIMPLICITY AND EASE OF USE EASY GRAPHIC USER INTERFACE The unique VIDEOset graphic control system is pleasant and easy to use. The user is guided intuitively and has no need of a manual. Set and actual run parameters can be displayed simultaneously thus assuring the user. A minimum of keys for a maximum of functions. Store the set of parameter values. Access to advanced parameters (radius programming, high reproducibility factor/ integral, temperature compensation). Start the run. Modify program parameter values. Create a set of parameter values..
UNEQUALLED CONVENIENCE Inclined flat screen and keyboard accessibly situated at the front of the centrifuge. Automatic lid opening assisted by gas springs and giving access to the front and both sides of the centrifuge. Minimum lab space and ideal working height (945 mm/37.2 in) for optimum sample handling. Induction motor is maintenance-free and exceptionally quiet (<60 dba*). * KR25i with rotor VIDEOset! Display
TRACEBILITY AND CENTRIFUGATION The IA-CQCS (Centrifugation Quality Control System) is designed to optimize and facilitate the traceability of the separation process during the centrifugation phase. Connection of 1 to 32 centrifuges, type KR4.22 or KR4i, all versions included. Simultaneous display and transfer to PC of all information relating to the runs (sample, centrifuge, operator and program identities, speed or RCF, time temperature, etc.) Automatic storage of run data on hard or floppy disk. Capture and exploitation of results by LIMS (laboratory information management systems). Printout of reports, including graphics at the end of the run. Search facility for previous runs (by date, sample number ) Ease of use - few keys and no hidden menus. Remote diagnostic function. Traceability of runs with curves of speed and temperature. Sample, operator and centrifuge traceability Supplementary information on AI-CQCS in brochure Cat N 89001263 Sample traceability. Aid to maintenance. Centrifuge traceability. Operator traceability. TIME AND SPACE SAVING : ECONOMY AUTO-LOCK : Absolutely no tool needed for rotor locking and unlocking. The most compact centrifuge in its category: (H xw x D) 960 x 787 x 690 mm. A range of 8 high-speed rotors and more than 40 accessories give the widest choice of solutions for sample preparation.
ROTORS AND ACCESSORIES Catalogue Total Tube dim. Rad. Max Max Angle Rotor Description Capacity number volume mm mm speed RCF deg r.p.m x g 11177392 AKL 16.20 Angle rotor 32 x 16 ml 512 ml 18 x 110 3 98 4 20500 46040 4 23 115 5 54030 5 11177357 set of 8 adaptors 1 1 x 5 ml 160 ml 12 x 75 86 4 20500 40400 4 23 103 5 48390 5 11177356 set of 8 adaptors 1 1 x 1.5 ml 48 ml 11 x 39 85 4 20500 39930 4 102 5 47920 5 23 11177393 AKL 50C.17 Angle rotor 8 x 50 ml con. 400 ml 29.5 x 115 127 17500 43480 40 11177378 set of 4 adaptors 1 x 10 ml 80 ml 16 x 80 106 17500 36293 40 11177395 AKL 50.17 Angle rotor 14 x 50 ml 700 ml 29 x 110 3 129 17500 44168 25 11177394 AKL 50.22 Angle rotor 8 x 50 ml 400 ml 29 x 110 3 112 22500 63400 34 11174599 set of 8 adaptors 1 x 30/38 ml 304 ml 25.5 x 92 102 22500 57730 25/34 6 11177373 set of 8 adaptors 1 x 30 ml Corex 240 ml 24 x 106 108 22500 61130 25/34 6 11177371 set of 8 adaptors 1 x 25 ml Corex 200 ml 24 x 102 108 22500 61130 25/34 6 11177370 set of 8 adaptors 1 x 15 ml Corex 120 ml 18 x 102 106 22500 60000 25/34 6 85240287 set of 8 adaptors 1 x 13 ml 104 ml 17 x 104 108 22500 61100 25/34 6 11174600 set of 8 adaptors 1 x 10 ml 80 ml 16 x 80 99 22500 56030 25/34 6 11177376 set of 8 adaptors 3 x 1.5 ml 36 ml 11 x 39 81 22500 45845 25/34 6 11177396 AKL 100.21 Angle rotor 8 x 100 ml 800 ml 38 x 110 3 104 21000 51270 20 11174596 set of 4 adaptors 2 1 x 50 ml 400 ml 29 x 103 100 21000 49300 20 11177359 set of 4 adaptors 2 1 x 50 ml con. 400 ml 30 x 116 99 21000 48810 20 11174597 set of 4 adaptors 2 1 x 30/38 ml 304 ml 25.5 x 92 95 21000 46840 20 11177358 set of 4 adaptors 2 1 x 15 ml con. 120 ml 17 x 120 92 21000 45360 20 11174598 set of 4 adaptors 2 2 x 10 ml 160 ml 16 x 80 98 21000 48320 20 11177372 set of 4 adaptors 2 4 x 1.5 ml 48 ml 11 x 39 100 21000 49300 20 11177397 AKL 250.14 Angle rotor 6 x 250 ml 1500 ml 61.7 x 131 3 147 14000 32210 28 11177369 set of 6 adaptors 1 x 100 ml 600 ml 38 x 102 131 14000 28700 28 11177362 set of 6 adaptors 1 x 50 ml con. 300 ml 30 x 116 128 14000 28050 28 11177361 set of 6 adaptors 4 x 15 ml con. 360 ml 17 x 120 137 14000 30020 28 11177398 AKL 500.11 Angle rotor 6 x 500 ml 3000 ml 69.8 x 169 3 155 11000 20970 20 11177368 set of 6 adaptors 1 x 250 ml 1500 ml 61.7 x 125 150 11000 20290 20 11177382 set of 6 adaptors 3 x 50 ml 900 ml 29 x 103 140 11000 18939 20 11177364 set of 6 adaptors 1 x 50 ml con. 300 ml 30 x 116 132 11000 17850 20 11177375 set of 6 adaptors 7 x 16 ml 672 ml 18 x 106 137 11000 18533 20 11177363 set of 6 adaptors 4 x 15 ml con. 360 ml 17 x 120 142 11000 19210 20 11177399 SWK100.13 Swing-out rotor 4 x 100 ml 400 ml 38 x 104 3 144 13000 27200 90 11174596 set of 4 adaptors 1 x 50 ml 200 ml 29 x 103 140 13000 26450 90 11174597 set of 4 adaptors 1 x 30/38 ml 152 ml 25.5 x 92 130 13000 24560 90 11174598 set of 4 adaptors 2 x 10 ml 80 ml 16 x 80 124 13000 23400 90 11177372 set of 4 adaptors 4 x 1.5 ml 24 ml 11 x 39 131 13000 24750 90 11177365 1 test tube rack 16 x 16 ml - 19 mm Ø - - - - 11177366 1 test tube rack 8 x 50 ml - 30 mm Ø - - - - 11177367 1 test tube rack 8 x 100 ml - 39 mm Ø - - - - 11177380 Vice + adaptors 50,100, - - - - - - 250, 500 ml 1 - Rotor accepts 4 sets 2 - Rotor accepts 2 sets 3 - Max. Dims 4 - Inner row 5 - Outer row 6 - As rotor Note : Maximum performance may be limited by the tube performance as stated by the tube manufacturer.
SPECIFICATIONS Max speed : 22 500 rpm Max RCF : 63 400 x g Max capacity : 6 x 500 ml Microprocessor controlled : VIDEOset software Graphic screen 240 x 128 pixels Memory : 32 programs Program password protection Autotest function Monitoring system : CQCS Speed : Range 1 000 to 22 500 rpm Step 10 rpm Accuracy < ± 30 rpm RCF : Range 120 x g to 63 400 x g Step 1 x g Accuracy < ± 20 x g at high speed Timer : Range 0 to 99 h 59 min + hold Step 1 min Accuracy < 1% Integrator : Range 100 to 999 x 10 9 m. rd 2 s -1 Step 1 m. rd 2 /s Acceleration : 10 Braking : 10 Temperature : Range (set) -8 C to +40 C at 20 C ambient temperature Step 1 C Accuracy ± 1.5 C Performance 4 C at 17 500 rpm with 8 x 50 ml rotor Drive : Quick rotor exchange : Motor : Dimensions (H x L x D) : Packed (H x L x D) : Weight ( net/gross) : Average/maximum power : Noise level : VISIT US NOW AT www.labworld-online.com INTERNET: www.jouan.com FRANCE : JOUAN S.A. - 10, rue Duguay Trouin - 44807 SAINT-HERBLAIN Cedex Tel +33 (0) 2 28 03 20 00 - Fax +33 (0) 2 28 03 20 01 e-mail : jouan@jouan.com - Internet: www.jouan.com Direct drive AUTO-LOCK CATALOGUE NUMBERS 230 V - 50 Hz 11177390 208 V - 60 Hz 11177351 Comply with current directives U.S.A. : JOUAN Inc. - Tel (540) 869 8623 - Toll Free (800) 662 7477 - Fax (540) 869 8626 e-mail : info@jouaninc.com GERMANY : JOUAN GmbH - Tel (089) 615 5906 - Fax (089) 615 59077 - e-mail : info@jouan.de U.K. : JOUAN Ltd - Tel (0115) 944 7989 - Fax (0115) 944 7080 - e-mail : jouan@enterprise.net ITALY : A.L.C. Int. Srl - Tel (02) 2539 0889 - Fax (02) 2538 922 - e-mail : jouan@jouanit.com RUSSIA : JOUAN Moscow - Fax/Tel (095) 211 4856 - e-mail : jouan.mp@g23.relcom.ru UKRAINE : JOUAN Kiev - Fax/Tel (044) 224 42 53 - e-mail : jouan@biochem.kiev.ua Induction motor 960 x 787 x 690 mm 1 250 x 1 000 x 900 mm 242 / 300 kg 3 500 / 5 300 VA 62 dba at 21 000 rpm uality ISO 9001 AFAQ N o 1995/3777a The quality of the product The quality of customer service The quality of the maintenance JOUAN continuously improves and develops its products.your equipment might therefore differ from its description as given in this leaflet. This document is not legally binding. 03/01 - Cat. N : 89001254