EC Type-Approval Certificate UK 2943

Transcription

1 UK 2943 V(0)a EC Type-Approval Certificate UK 2943 issued by the: National Measurement Office Notified Body Number 0126 In accordance with the requirements of the Non-Automatic Weighing Instruments Regulations 2000 (SI 2000/3236) which implement, in the United Kingdom, Council Directive 2009/23/EC, this EC Type-Approval Certificate has been issued to: Dini Argeo S.r.l. Via della Fisica Spezzano di Fiorano Modena Italy in respect of an Non-Automatic Weighing Instrument designated the LTFaa-X or LTWaa-X (where aa and X denote model variations) Forklift Truck Scale System and having the following characteristics: 600 kg Maximum capacity 5000 kg e 0.2 kg n 3,000 per partial weighing range, with a maximum of two weighing ranges The necessary data (principal characteristics, alterations, securing, functioning etc) for identification purposes and conditions (when applicable) are set out in the descriptive annex to this certificate. Issue Date: Valid Until: Reference : 31 July July 2023 TS1201/0055 Signatory: for P R Dixon Chief Executive National Measurement Office Stanton Avenue Teddington TW11 0JZ United Kingdom Tel +44 (0) Fax +44 (0) Web NMO is an Executive Agency of the Department for Business, Innovation & Skills 0135 NAWI (indicator) Rev February 2013

2 Descriptive Annex 1 NAME AND TYPE OF INSTRUMENT The weighing instrument is designated the LTFaa-X or LTWaa-X Forklift Truck Scale System. The instrument may be fitted with a built-printer and WiFi connectivity (optional). The instrument is a Class III or IIII, self-indicating weighing instrument with single-interval, multi-interval or multi-range, an external AC mains adapter, and an internal rechargeable battery. The indicators consist of analogue to digital conversion circuitry, microprocessor control circuitry, power supply, keyboard, non-volatile memory for storage of calibration and setup data, and a weight display contained within a single enclosure. 2 FUNCTIONAL DESCRIPTION 2.1 Construction and devices The LTFaa-X and LTWaa-X Forklift Truck Scale System digital weight indicators are fully described in EC Test Certificate GB Load Receptor for LTFaa-X Trucks The LTFaa-X Forklift Scale System load receptor consists of a pair of electronic forks, which are fitted with a load cell assembly of four shear beam load cells, as described in 2.2 below. These forks are interchangeable between compatible forklift trucks. The digital indicator is connected via a cable or RF transmission to a repeater placed in the cabin of the fork lift truck Load Receptor for LTWaa-X Trucks The LTWaa-X Forklift Scale System load receptor consists of a weigh carriage, which is fitted with a load cell assembly of two shear beam load cells, as described in 2.2 below. This carriage fits onto the existing forklift truck carriage. The forks of the truck are placed onto the weigh carriage. The front and back plates of the weigh carriage are coupled together by the load cell assembly, thus eliminating flexures. The digital indicator is connected via a cable or RF transmission to a repeater placed in the cabin of the fork lift truck. 2/7

3 2.2 Load cell The fork lift trucks approved under this certificate may only use the following approved load cells. Manufacturer Model Test Certificate Issued by Dini Argeo srl SBX-1K TC7451 NMi Dini Argeo srl SBX TC7451 NMi Dini Argeo srl SBK-1K TC7451 NMi Dini Argeo srl SBK TC7451 NMi Dini Argeo srl SBZ-SBU TC7644 NMi Cibe srl SBK-1K TC6481 NMi Cibe srl SBK TC6481 NMi Cibe srl SBX UCM 08/001-A Ministero dello sviluppo Economico 2.3 Metrological characteristics LTFaa-X Max 1000 / 2500 kg 2500 / 5000 kg Min = 20 e 20 e e 0.5 / 1 kg 1 / 2 kg T - 40 kg - 80 kg Load cell TC number TC7451 TC7644 TC6481 UCM 08/001-A of L/C 4 4 E max 2000 kg 3000 kg LTWaa-X Max 600 / 1500 kg 1500 / 2500 kg Min 20 e 20 e e 0.2 / 0.5 kg 0.5 / 1 kg T kg kg Load cell TC number TC7451 TC7644 TC6481 TC7451 TC7644 TC6481 of L/C 4 4 E max 2000 kg 2000 kg 3/7

4 2.4 Digital Inclinometer Junction Box The inclinometer is put in a Junction box and connected to the indicator. This compensate for up to 5% inclination longitudinal (forward or back) tilt and up to 5% transverse (left or right) tilt. When these angles are exceeded, the display will show an error code with the word TILT on the display and it s not possible to weigh. 3 TECHNICAL DATA 3.1 Technical data for the digital indicators are provided in EC Test Certificate GB PERIPHERAL DEVICES AND INTERFACES 4.1 Interfaces The interfaces for the digital indicators are provided in EC Test Certificate GB Peripheral devices The following peripheral devices may be connected to the interfaces provided: Peripheral devices that have been issued with a test certificate by a Notified Body responsible for type approval under Directive 2009/23/EC; or Peripheral devices without a test certificate under the following conditions: - it bears the CE marking for conformity to the EMC Directive; - it is not capable of transmitting any data or instruction into the weighing instrument, other than to release a printout, checking for correct data transmission or validation; - it prints weighing results and other data as received from the weighing instrument without any modification or further processing; - it complies with the applicable requirements of EN45501, i.e. 4.2, 4.4, 4.6 and 4.7. A printing device may print additional information such as date or number to identify the printed weighing result(s) or sets of weighing results. 4/7

5 5 APPROVAL CONDITIONS This certificate is issued subject to the following conditions: 5.1 The forks used in the LTFaa-X and LTWaa-X Forklift Truck Scale System are limited to the following dimensions: Maximum length of 1160 mm Maximum width of 910 mm 5.2 Legends and inscriptions The remote display bears the following legends on or near the display: Max Min e = The instrument shall bear the following legends: Accuracy class CE marking Green M Serial number Manufacturer s mark or name Certificate number T = - (where Tare Max) The markings and inscriptions shall fulfil the requirements of Paragraph 1 of Annex IV of the Directive 2009/23/EC. 6 LOCATION OF SEALS AND VERIFICATION MARKS 6.1 The data plate is secured, either by sealing or by being of a form such that it is destroyed when removed Components that may not be dismantled or adjusted by the user must be secured by a wire and seal solution or by a suitable mark placed over the securing screws of the housing (Indicators: Figure 3). The securing mark may be either: a mark of the manufacturer and/or manufacturer s representative, or an official mark of a verification officer. 6.3 Verification marks, and the CE-marking, are located on, or adjacent to, the data plate situated at the back of the display. 7 ALTERNATIVES 7.1 There are no authorised alternatives: 5/7

6 8 ILLUSTRATIONS Figure 1 Sealing method on the LTFaa-X and LTWaa-X 9 CERTIFICATE HISTORY Issue. Date Description UK July 2013 Type approval first issued. 6/7

7 Control Mark on Junction box Control Mark Inside indicator Figure 1 Sealing method on the LTFaa-X and LTWaa-X Crown Copyright 2013 NATIONAL MEASUREMENT OFFICE Department for Business, Innovation & Skills 7/7