www.steelformcatering.com catering
cat e r i n g We are specialized in the production and sub furniture of components for mechanical industry, sector for which we even furnish advice and collaborate in the design and co-design of new products. Since the 90 s we decided to specialize our production in stainless steel and in special alloys working in order to substain different and particular problems of our customers. We cover in our internal working organisation the whole production line, constantly investing our human and technology resources, guaranteeing in this way a vanguard production, respecting quality and safety standards. Plants: 4, located in Italy (48.000m 2 of surface - 14.700m 2 of factory) Employed: 140 Turnover: 15,5 Mln Euro approvals and certifications UNI EN ISO 9001 Directive 97/23/CE PED Qualification of processing center EN 1090 UNI EN ISO 3834 Mode II Scheme Bureau Veritas WPS,WPQ, WPQR laut EN, ASME IX, AWS
We produce and sell directly adjustable feet and levelling feet suitable for any stainless steel support: dishwasher, kitchen, ice machine, blast chiller, more than 2000 different solutions for every need. Our adjustable feet are manufactured to the highest quality standards, using the highest quality materials. The attention to details, both in project planning and production, distinguish us in the commercial scenery. Our levelling feet include details in highly resistant plastic material (polyamide with glass fiber) that ensures Our adjustable leveling feet include details in highly resistant plastic material (polyamide with glass fibers) that ensures high durability. Our models are tested and certified by CATAS for the static and vertical load and strength of the welds. A range of settings that allow you to start from a minimum height of 30mm until to a maximum of 500mm according to the chosen model. Levelling feet and legs in stainless steel and plastic Adjustable feet with screw Adjustable feet type marine Adjustable feet with plastic flange Supported beam with levelling feet Round and square legs for table and skins Inserting feet Adjustable feet with inox flange Adjustable plastic feet with flange
Fry Top production with the following characteristics: Perform according to customer s drawing / Griddles in glazing carbon steel / Griddles in chromated carbon steel / Griddles in glazing stainless steel / Griddles in Compoun thk.12mm and 15mm / Special processing on request (polygroove,hole and channel drainage, ecc.) / Shotblasting with metallic spheres where required / Pipe draining included / Fry Top under surface with stud bolts for burner unit assembly / Bulb protections on bottom area / Stainless steel splashbacks according to drawing / Splashback assembly with robotic Tig welding / Finishing review of splashback external surfaces / NDT final welding inspection / Sand blasting with glass microspheres where required All procedures are done internally at Steelform s factories. Griddleplates for FRY TOP, TEPPANYAKI, Plates for BRATT PAN Solid tops for kitchens Fry top with stainless steel splash backs assembly with robotic Tig welding STANDARD GRILLING TYPE A We have 5 types of standard grilling STANDARD GRILLING TYPE B STANDARD GRILLING TYPE E STANDARD GRILLING TYPE F STANDARD GRILLING TYPE I
Modular, practical, resistant and adaptable in any space. It s fast and practical to assemble thanks to its conic coupling which gives the possibility to compose a modular structure operating on the hole space needed using the tops. bamboo Modular Shelves Length Capacity Loading Capacity The BAMBOO shelves are studied in stainless steel for a loading capacity up to 200kg equally distributed on every top. 600 700 800 900 1000 1100 1200 1300 1400 1500 200 Kg 150 Kg Max = 1600 kg ø 3,8 cm 4 cm 1600 1700 1800 1900 2000 100 Kg Dimensions Dimensions of the top range. 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 1 600 700 800 900 1000 1100 1200 1300 1400 1500 Length 1600 1700 1800 1900 2000 The BAMBOO shelf is assembled in 8 simple steps. 2 3 4 300 400 500 600 Width More Specific Details The BAMBOO shelf has a patent self-locking Height It guarantees toughness, solidity and absolute hygiene thanks to the material used in stainless steel 18/10, together with the working details and structure design, it gives elegance with its round corners. 5 6 7 8 assembling system. There is no need to have cross stabilizers. Option with castor and/or with break.
Easy and fast! These structures are made with our Zenitech system without welding in stainless steel, highly resistant and hard. This is adaptable system, are sold disassembled and can be easily assembled it by final customers reducing packaging volume and consequently transport costs. Patented tube structures withour welding for tables, lockers and oven holders As shown, they can be used to realize trolleys also. Stainless steel structure for tables and ovens with tray holder.
We are specialized in: components for oven, heat exchangers, finned tubes, heat exchangers development upon customer s drawings and Spec n Pipe exchangers and burners for ovens Components for dishwashers Group of dish washing, heat exchanger for fryer, blast of smoke, conduct dish water supply
www.steelformcatering.com From the collaboration of the different sectors, in our structure emerges everyday new solutions: the meeting of different capacities helps us to furnish our customers complete projects and products, done on size for single needs. We offer products and services dedicated to professional and domestic catering, naval, petrochemical, chemical and energetic installations, for lighting systems, producers of pumps, gas boilers and pellet stoves, agriculture and health. The hydroforming technology is incredibly sophisticated in the formation with high fluid pressure that is that pushes towards joining the plate to the wall of the forming mold. And that is how we managed to get a variable form with an incredible seamless volume. The end result is a unique product, sinuous, exciting, for a seamless flow of exhaust gases that is absolutely excellent, with incredibly low thickness of the plate, mechanically rigid and record lightweight. Components on request and even co-design parts with customer The pumps are entirely made of stainless steel for lifting and emptying of waste water, industrial and civil sewage with solids in suspension, for one or more pumping stations for agricultural, civil and industrial stations with one or more pumps for complexes. our processes We are specialized in the production and sub furniture of components for mechanical industry, sector for which we even furnish advice and collaborate in the design and codesign of new products. We manufacture structural components for lighting and street furniture 4 PLANTS: Production of stainless steel tube with forming machine from diameter 10mm to diameter 150mm, laser cut tube and plate, robot Tig and Mig welding machine, submerged arch, laser, wire, strip and powder welding, automatic and semiautomatic welding with dedicated equipment, tube working: pipe bending, rimming, threading, rolling, pot die forming, punching and glazing, CN and manual milling and turning all types of dimensions and many other processes
contacts FRIULI VENEZIA GIULIA steelform srl Via M. Piccini, 16 33050 Rivignano [UD] Italy tel +39 0432 822011 fax +39 0432 822231 export@steelformitalia.it info@steelformitalia.it ITALY EUROPE