1100 & 1400 Energy Controllers Satchwell 1100 & 1400 for energy-efficient temperature control in smaller buildings.
02 1100 & 1400 Energy Controllers Features he 1100 and 1400 Energy Controllers are self-configuring optimiser/ compensators, capable of controlling one or two boilers in sequence with HWS time control. Designed for easy installation and operation in small/medium commercial properties, they are a costeffective option for achieving significant improvements in energy use. Product A A GLANCE Easy set-up - these controllers are selfconfiguring, matching the connected sensors Easy to use - simple, intuitive user interface Flexible application - caters for a wide variety of control schemes Energy efficiency - optimiser function delivers consistent energy savings rouble-free operation - proven reliability minimises problems and ensures peace of mind Self-Configuration he 1100 and 1400 are self-configuring. he controller recognises the application by the sensors that are connected to it, and configures itself accordingly. he use of sensible default settings, and self-adaptive optimiser and compensator routines, means that the system can be set to work quickly after the required temperatures and times have been entered. he controller will automatically fine tune, matching the building s requirements. o further reduce installation costs, a single outside sensor can pass information to other 1100/1400 s on the same site. Ease of Operation he user interface is designed to make day-to-day operation of the controllers as easy as possible. he large LCD display shows current status at a glance. he front panel control switch provides easy selection options, including an override to allow the heating to be turned on and off without the need to change the settings at the controller. his can also be achieved by means of a remote switch unit. Schneider Electric One High Street, North Andover, MA 01845 USA elephone: +1 978 975 9600 Fax: +1 978 975 9698 www.schneider-electric.com/buildings SDS-1100_1400-A4.BU.N.EN.9.2008.0.00.CC
03 1100 & 1400 Energy Controllers Features (continued) Enhanced Boiler Performance Boiler control in sequence with optional automatic weekly rotation provides stable control conditions, eliminating short cycling during light load conditions and enhancing boiler performance and life. Product Selection AC offers a complete range of field devices to match the operating requirements of the 1100 and 1400. Our regional sales office will advise you in choosing the right models for new projects and for upgrading CMC and CSMC installations. Bright LEDs indicate which functions are on, clearly showing the controller s output status. An alarm is included to display a number of operating faults. he large four-line display normally shows the time, date, a selected temperature and the current operating status. It is also used to view alarms and change settings. An intuitive, menu driven, LCD display makes setting and commissioning easy. he control switch selects a choice of settings: normal automatic control of heating and hot water; summer operation of hot water only; constant heating; frost protection only; a set position to change times and temperatures. A service mode allows for plant maintenance without alteration of controller settings. Schneider Electric One High Street, North Andover, MA 01845 USA elephone: +1 978 975 9600 Fax: +1 978 975 9698 www.schneider-electric.com/buildings SDS-1100_1400-A4.BU.N.EN.9.2008.0.00.CC
04 1100 & 1400 Energy Controllers Applications DO DW DO DR DR DO DO DW DW he 1100 and 1400 provide total heating control, controlling both the heat source and the heat emitters, whether conventional radiators, under-floor coils, fan convectors or other devices. Many different applications DR are possible. DO DO DO DW DO DR DR F DR DW DO DO Applications DR DR DO F DW DO DW F DW DR Optimisation Only DO DW Optimisation with Boiler Compensation one or two boiler control DO DR Valve Compensation only fixed F time start boiler sequence control DW DR DW DO DO DW DO DO DO DO DR DO DO DR DR F DW DR DW DO DO DO DR DR DW DW DW DW DW F DW DW DO DW F DW DR Optimisation and Boiler DW Sequence Control F DW DW DW DR DO DO DO DR DW DR DO DO DR F DR DO DR DO DO Optimisation with DW DW DO DO Valve Compensation DR DR F DR DW DW DO DO DO F DR F DR DW DW DW DW F DR DO DO Optimisation and Valve/boiler DW DW Compensation one or two boiler control DW DW DW DO DR DR DO Step Controller No.3 No.4 DO DW DR DR DR DO F F F DR DO DR DO DO F DR DO DO DW F DW DW DW Boiler F Compensation F fixed time start DW DW one or two boiler control DO DO DO DO DW DW DW DW DO DO DR DR F DW DW DR DW DW DO DO DO F DR Valve Compensation F DR only fixed time start DW DW DW DW DW DW DW F F DR DR Optimisation with Valve Compensation and Step Controller boiler sequence control DW DO DW F F DW DW DW F F DO DO DW DO DO DO F F DR DO DR DO DO DW DW Step Controller DW DO DO F F DW DW DW DW DR No.3 No.4 DO DO F DR DR F No.3 No.4 DW DW F F DO DO DR DW DW DR DR DW DW DW DW DW DW DW DW F F F F DR DO DR DO DO DO DO DW DW DO DW DW DO DO DW DW DW DW DO DO F F Step Controller Step Controller DW DW DO DO DR No.3 No.4 DR No.3 No.4 Step Controller Step Controller DW DW DW DW F F DW DW DR DR No.4 No.3 No.3 No.4 DR DO DO DR DO DO DW DW Step Step Controller DW DW DR No.3 No.4 DR No.3 No.4 Schneider Electric One High Street, North Andover, MA 01845 USA elephone: +1 978 975 9600 Fax: +1 978 975 9698 www.schneider-electric.com/buildings SDS-1100_1400-A4.BU.N.EN.9.2008.0.00.CC
05 1100 & 1400 Energy Controllers Functions Functions Self configuring controller Self adaptive optimum start Self adaptive optimum stop Day economy switch off Boiler sequence control Weekly boiler rotation Valve compensation Boiler compensation Valve/boiler compensation Self-adaptive compensator option Adjustable space temperature reset on compensator Night set back (space or flow temperature) Variable pump overrun Hot water time channel Multi-stage frost protection Valve/pump summer exercise Holiday scheduling BS/GM auto clock change Summer/winter operation Front panel selector AUO / SUMMER / CON / FROS / SERVICE Remote override facility Alarm indicator Optimum Start Space temperature Ordinary timer start Optimiser start latest possible he controller starts and stops the plant at the earliest or latest possible time to reduce energy consumption. Weather Compensated Control Max Flow temp. Min Saving 1700 0900 hours Self adaption Outside temperature Max he flow temperature is adjusted to the outside to match heat losses from the building, preventing overheating and maintaining comfort. Schneider Electric One High Street, North Andover, MA 01845 USA elephone: +1 978 975 9600 Fax: +1 978 975 9698 www.schneider-electric.com/buildings SDS-1100_1400-A4.BU.N.EN.9.2008.0.00.CC
06 1100 & 1400 Energy Controllers Specifications 1100 & 1400 ypes 1100 Energy Controller using A series sensors 1400 Energy Controller using standard Satchwell sensors Electrical/Mechanical Power supply 230 Vac, 15 VA (50/60 Hz) Relay ratings SPNO 230 Vac, 3 A resistive, 1 A inductive Operating conditions 0 to 50 C, 5 to 95% rh non-condensing Construction Case Moulded polycarbonate plastic case, Fire resistant to UL94-V-0 Dimensions Controller 191 x 144 x 106 mm Protection class IP40 Complies with EC directives EMC, LVD Mounting Panel or surface mount Easy Installation he separate wiring base unit allows easy wall or panel mounting and access to the terminals. A single screw secures the controller to the base. Gold plated pins ensure good contact between controller and wiring base. All brand names, trademarks and registered trademarks are the property of their respective owners. Information contained within this document is subject to change without notice. Schneider Electric One High Street, North Andover, MA 01845 USA elephone: +1 978 975 9600 Fax: +1 978 975 9698 www.schneider-electric.com/buildings 2008-2009 Schneider Electric. All rights reserved. SDS-1100_1400-A4.BU.N.EN.9.2008.0.00.CC September 2008 pdw