KNX IP: Breakthrough to more performance
2
List of contents: Cross-discipline automation with KNX IP 4 Overview of modern building automation Flexible and open for every application 6 The WAGO-I/O-SYSTEM Lighting, shading, heating/ventilation and much more One software tool for all disciplines 8 Universal base modules for many options The WAGO KNX/EIB concept: 10 Simple, versatile and fast An overview Universal modules for intelligent functions 12 in a single device KNX/EIB components in detail Solutions for every application 14 Examples of applications and uses Connect, switch on and simply get starting 16 For beginners Seminars and training 17 Training courses focusing on building automation WAGO online 17 Training courses focusing on building automation Benefits that speack for themselves 18 Advantages for designers, electrical installers, system integrators and users 3
Cross-discipline automation with KNX IP Heating, air-conditioning and ventilation control centers Automatic control of heating and ventilation equipment increases comfort and improves the climate within a building with maximum economy and minimum energy costs. Central monitoring and remote access included. For comforting warmth: A precision individual room controller creates the right room temperature, adapts itself automatically to the user s wishes and recognizes the heat requirement during the day. Added value by optimizing the operating costs The requirements of building for comfort, safety, fl exibility and an effi cient use of energy are continuously increasing. In the future, it will be possible to easily and quickly adapt a building to suit the requirements and off er fl exible conversions. With KNX IP, modern building automation extends a communications network throughout the whole building, and create individual sections. This will increase the value of the property and optimize the operating costs. It will also provide a fault management and security functions. 4
For a comfortable working atmosphere: Whether offi ce, reception, laboratory or conference room: the individual use determines the required brightness and lighting atmosphere. The lighting controller automatically adjusts the lighting conditions and can be incorporated into comprehensive energy-saving concepts. For a good room climate: Optimum control provides a good room climate and increases the effi ciency of the people using the room. For glare-free working: An automatic blind controller creates glarefree lighting and well-regulated shade depending on the room usage. It provides a pleasant room climate by optimizing the heat introduced and the amount of shade. 5
Flexible and open for every application The WAGO-I/O-SYSTEM KNX IP BACnet LonWorks The WAGO-I/O-SYSTEM 750 makes it possible: complete in-the-fi eld wiring of the I/O modules, without defi nition of the fi nal fi eldbus. The modularity of the system enables almost any combination of digital/analog inputs and outputs and complex sub-bus modules to be assembled on a fi eldbus node. As well as communications tasks on the network, the controllers also take care of standalone open and closed loop control tasks with regard to lighting, shading, heating, ventilation, air conditioning and other applications. Both as part of a higher-level control system, e.g. multiple axes, and directly at room level. This guarantees high availability of the sub-applications, simple structures and fast response times while maintaining the fullest fl exibility. 6
Digital inputs 2-/4-/8-channel 5/24/48VDC 24/120/230VAC 0.2/3/50ms Digital outputs 2-/4-/8-channel 5/24VDC 125/230/250VAC 0.02/0.3/0.5/1/2 /.../16A/Relay module Specialty modules Supply modules AC/DC 0-230V Counters and other functions A n a l o g inputs 2-/4-channel 0-10/±10VDC 0-20/4-20 ma PT100, PT1000 Ni1000 A n a l o g outputs 2-/4-channel 0-10/±10VDC 0-20/4-20mA DALI Master The DALI Master module is used for controlling up to 64 electronic ballasts in accordance with the DALI standard. This enables complex lighting applications to be easily parameterized and controlled with status of every individual lamp reported. EnOcean Radio Receiver The wireless EnOcean switches and sensors can be conveniently installed on glass walls, for example, and moved to a diff erent position without cabling. Thanks to this innovative no-battery technology, the components are absolutely maintenance-free over the life of their service. 7
One software tool for all disciplines HVAC Individual room control Communication 8
The WAGO I/O-PRO CAA software serves as a basic programming tool for the user/installer. Custom programs may be written in IEC 61131-3 programming languages (FBD, LD, IL, ST, CFC and FC). Regardless of whether HVAC (e.g., ventilation system controllers) or lighting and blind control applications, almost any kind of application is possible. Ready-made libraries make programming easier. Solutions are available for the following complex applications: control of DALI lights or control valves with BELIMO MP-Bus, remote meter reading via M-Bus or communication with KNX/EIB bus participants. Through modular WAGO hardware and fl exible programming, the KNX/EIB user may off er solutions to his customers that were previously only possible with a lot of resources in terms of hardware and costs. Grafi cally designed programs, e.g. using the FBD (Function Block Diagram) programming language are very easy to create and are easily comprehensible even to service technicians. The WAGO I/O-PRO CAA software, in combination with the WEB server in the KNX IP controller, also off ers very easy to create/handle user interfaces in WEB browser on any type of PC. This often makes an expensive visualization software unnecessary. This also makes remote access with appropriate rights via INTRANET and INTERNET possible. A large number of switching channels for a wide variety of applications may be defi ned using the controller s built-in clock as well as ready-made program modules. 9
The WAGO KNX/EIB concept: Simple, versatile ETS 3 ETHERNET (KNX IP) In recent years, global communications options without speed limits have afforded great success to ETHERNET as a medium for automation, as ETHER- NET off ers several advantages: high speed between devices, incorporation into an already existing infrastructure, seamless access from any location, web technology. Further advantages of KNX IP as a transmission protocol on ETHERNET as a medium include the fact that KNX/EIB knowledge already acquired can be applied, and the familiar and proven ETS 3 software can be used for commissioning.. With the KNX IP controller and the KNX/EIB/TP1 module, WAGO provides an innovative concept for building automation. Complex applications, which were unthinkable up to now, can be created with these components. The KNX/EIB/TP1 module provides the connection to existing TP1 networks; conventional sensors and actuators as well as complex connections to DALI, EnOcean, etc. can be brought together cost-eff ectively on the KNX IP controller. Router KNX/EIB/TP1 network 10
and fast NETWORK KNX TP1 module Interface modules Inputs Outputs Push button Standard devices Lighting fixtures Sub-bus systems 11
Universal modules for intelligent fu The intelligent application controller for rooms and zones The free programmability makes the WAGO 750-849 KNX IP Controller into a powerful room and zone controller. This makes it possible to solve any open and closed loop control task - whether logical operations for window monitoring, computations for forming average and limiting values or extensive heating and ventilation controllers. KNXnet/IP routing is made possible by combining the KNX IP controller with a KNX/EIB/TP1 module. Controller with logic The 753-646 KNX/EIB/TP1 Module provides two separate functions, which set themselves up automatically depending on the application. It can be used as a KNX/EIB interface to freely programmable controllers of the WAGO-I/O- SYSTEM 750 or as TP1 interface for KNXnet/IP routing. Module as TP1 interface ETS 3 WAGO plug-in 12
nctions in a single device Controller/Router Controller and router: Two devices in ONE A routing is made possible by combining the KNX IP controller and the KNX/ EIB/TP1 module, which allows classical TP1 networks to be connected to ETHERNET. With only two components, the WAGO-I/O-SYSTEM 750 becomes a multifunctional KNX/EIB device. It provides functionalities for which several diff erent EIB devices are currently required. Easy commissioning Confi guration of the WAGO KNX IP controller is done using the standard programming tool, ETS 3. A plugin specially developed by WAGO supports the user with assignment of group addresses and downloading of applications. WAGO-I/O-PRO CAA 13
Examples for every application KNXnet/IP routing ETS 3 IP backbone 750-849 IP controller Router 1.1.0 ETS KNX-TP1 750-600 module TP 1.1.1 Device 750-849 IP controller Router 1.2.0 KNX-TP1 750-600 module TP 1.2.1 Device In this application example, the WAGO KNX IP controller with the KNX/EIB/TP1 module is used as a router on an IP backbone (ETHER- NET). No IEC application is required for the router functionality. The ETS 3 is connected on the ETHERNET side and has access to all devices, which are connected via the KNX/EIB/TP1 modules in the TP1 networks shown. A device in the TP1 network on the left can communicate with a device in a TP1 network on the right via the IP backbone. 1.1.2 1.2.2 Device Device KNX IP controller with I/O modules ETS 3 IP backbone 750-849 2.0.1 750-xxx 750-xxx 750-600 2.0.2 750-xxx 750-xxx 750-600 Logic IP controller Router DI Logic Router DO The KNX IP controller can also be used as a pure application controller with standard digital/analog input and output modules and with specialty modules. The communication between the controllers is performed via an ETHERNET network. Push button Lighting 14
Fieldbus controller with KNX/EIB/TP1 module as gateway Connection to fi eldbus LON, BACnet, Profi net, Devicenet, etc. Logic Gateway 750-xxx 750-xxx KNX-TP1 750-600 module In this application example, the KNX/ EIB/TP1 module is used not on a KNX IP controller, but on a diff erent controller from the WAGO 750 Series. In this case, the KNX/EIB/TP1 module acts as a gateway. The ETS 3 is inserted in the TP1 line. ETS 3 TP ETS Device Device KNX IP controller with I/O modules and router IP backbone ETS 3 ETS 750-849 2.0.1 750-xxx 750-xxx 750-xxx 750-600 DI Logic IP Controller This application shows the processing of data from two devices in the same TP1 network and the integration of further modules of the WAGO 750/753 Series. Switches, for example, can be connected to these modules. Data from the switches and data from the devices on the TP1 network can be processed together in the IEC application. Router 1.1.0 TP 1.1.1 Device Push button NOTE: This is only a selection of possible application examples. Please fi nd further examples and information at www.wago.com. 1.1.2 Device 15
Connect, switch on and simply get starting From the simple lighting controller to the complex and extensive heating and ventilation control system, WAGO provides the user with a selection of comprehensive libraries with pre-programmed function blocks, which have been specially matched to the requirements of building automation. Beginners can call upon completed applications with a recommendation for the appropriate hardware confi guration for the controller. The web pages for the control and for displaying status messages are already included here. All applilcations can be used either directly for existing projects or as a template for carrying out project-specifi c modifi cations retrospectively. This makes it easier for KNX/EIB experts who do not have PLC experience to use the components. Examples of completed applications: Single room automation (lighting, shade, heating/cooling) Multiaxial room automation DALI lighting control with conventional switches (or EnOcean radio buttons) Multiple blind actuator Multiple switch actuator and others Switch actuator confi guration Switching channel Switch Central ON/OFF disabled Stairwell light None retrigger Prewarning disabled OFF-delay Time Off -delay T#0ms ON-delay Time On-delay T#0ms ON-/OFF-delay Reset-mode RETAIN Reset-mode ON Reset-mode OFF Default values Write Home OFF 16
Seminars and training The maximum benefi ts of our products are yours by gaining maximum user knowledge. For this reason, WAGO conveys this knowledge to you in effective and user-oriented seminars and training. This will save you time and will help use our products to their fullest capacity. For example, in seminars focusing on building automation you learn how to wor k in the WAGO programming environment and the use of KNX IP components for creating custom building automation solutions. You can fi nd information on dates and topics for upcoming seminars and training at www.wago.com under: Service/Seminars and Training. WAGO online The very latest at the click of a mouse Yesterday s information will not get anyone anywhere. You can therefore access our latest data at any time with the WAGO building technology portal at www.wago.com. Here you will fi nd everything you want to know about building automation with the most up-to-date product information, links to take you further, particulars of the next seminar dates, and much more. It is worth a virtual visit. Regularly. Come and see for yourself. And ask us if you can t fi nd an answer on our web site. We look forward to hearing from you. www.wago.com 17
Benefits that speack for themselves It is no coincidence that components and composition have the same roots. Components are more than individual parts but are perfectly matched elements of a complete composition. Even the innovative WAGO KNX/EIB components are seamlessly integrated in the WAGO-I/O-SYSTEM. This provides a large choice of input and output modules, specialty modules to sub-bus systems such as DALI, and controllers for higher level networks such as ETHERNET. Once selected, configurations are not fixed. Changes and expansions are possible at any time, at the planning stage, during the building phase and even several years later. The WAGO-I/O-SYSTEM can be used for pre-programmed functions, and also as an open programmable control system according to IEC 61131-3. Predesigned or easy-to-create Web pages can be used as an operator interface on the controllers. The control units replace several individual KNX/IEB components cost-effectively as room and zone controllers. The WAGO-I/O-SYSTEM has been used in building technology for many years and is thus accepted by many designers, electrical installers, system integrators and users an important sales argument in the competition for your valuable orders. 18
Designer Existing systems can be expanded using new, previously unavailable functions All subsections can be planned using one manufacturer All applications can be implemented with one device The whole system provides flexibility for customer wishes Positive energy balance by bringing together several functions; long system life Same components used for industrial and building applications Compliance with the norms/certificates well beyond the building technology standard Installer WAGO-ETS 3 plug-in offers the familiar user interface New applications (from simple logic functions to complex control tasks) Standard applications can be created easily by using pre-programmed applications or by the free programming; project-specific adaptations are also possible The wire connection technology supplies the utmost safety during installation System integrator New applications possible; e.g., HVAC applications WAGO-ETS 3 plug-in provides the familiar user interface One hardware system for different technologies Economic due to universal use across many subsections A great number of data points in one controller Function blocks for BA, HVAC and others (E-Mail, SMS, etc.) are available User interfaces can be implemented via web server User Existing installations can be expanded by new functions in the future Long system lifecycle, subsequent deliveries are guaranteed Web-based, cost-effective service and maintenance interfaces are automatically integrated Unrivaled spares inventory The service provider for the complete system can be chosen freely Easy-to-use and to handle due to simple replacement of individual modules 19
WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 32385 Minden Hansastraße 27 32423 Minden Phone +49 571/887-0 Fax +49 571/887-169 info@wago.com www.wago.com 0888-0579/0004-0101-I/O KNX/EIB - 3.0 - E - 01/08 - Printed in Germany, JA - Subject to design changes