PO Box 68253 Highveld Centurion 0169 South Africa African NDT Centre (Pty) Ltd Tel. No :+27 (0) 12 665 3248 Fax. No:+27 (0) 12 665 4749 224 Witch-Hazel Ave Highveld Technopark Centurion Pretoria South Africa CAPE TOWN TRAINING SCHEDULE Doc No : QF-TRG-1346 Issue : 2 Contact Persons: Training Manager: Wayne Claassens (wayne.claassens@andtc.com) Training/Exam Administration: Sipho Sithole (examination@andtc.com) Bookings: Kobie Rautenbach (training@andtc.com) Accounts: Lizelle Kotzé (accounts@andtc.com) Sheet 1 of 6
Course Title Eligibility Fees Dates Course No Liquid Penetrant (PT) Liquid Penetrant Level 1 Grade 10 Liquid Penetrant Level 2 PT Level 1 20-24 January PT1-17 07-11 July PT1-18 06-10 October PT1-19 03-07 March PT2-17 09-13 June PT2-18 Magnetic Particle (MT) Magnetic Particle Level 1 Grade 10 Magnetic Particle Level 2 MT Level 1 Radiographic Testing (RT) 13-17 January MT1-17 30 June - 04 July MT1-18 29 September - 03 October MT1-19 24-28 February MT2-17 02-06 June MT2-18 Radiographic Testing Level 1 (Certificates will only be issued after successful completion of both the Radigraphic Testing and Radiation Safety examinations) Matric (Mathematics and Science) 12-30 May RT1-09 13-31 October RT1-10 Radiographic Testing Level 2 (Radiographic Interpreters training is presented w ith RT2) RT Level 1 21 July - 01 August 10-21 November RT2-09 RT2-10 Ultrasonic Testing (UT) Ultrasonic Testing Level 1 Matric (Mathematics and Science) Ultrasonic Testing Level 2 Level 1 27 January - 14 February UT1-09 18 August - 05 September UT1-10 10-21 March UT2-09 24 November - 05 December UT2-10 Weld Inspector (WI) Weld Inspector Level 1 None 17-27 June WI1-09 Weld Inspector Level 2 Level 1 04-15 August WI2-09 Eddy Current (ET) Eddy Current Level 1 Matric (Mathematics and Science) Eddy Current Level 2 ET Level 1 24 March - 04 April ET1-05 24 March - 02 April ET2-05 Sheet 2 of 6
Course Title Eligibility Fees Dates Course No Product Technology (PRODT) Product Technology Course Grade 10 18-19 January PRODT-38 01-02 February PRODT-39 01-02 March PRODT-40 15-16 March PRODT-41 29-30 March PRODT-42 17-18 May PRODT-43 07-08 June PRODT-44 05-06 July PRODT-45 26-27 July PRODT-46 23-24 August PRODT-47 04-05 October PRODT-48 18-19 October PRODT-49 15-16 November PRODT-50 29-30 November PRODT-51 Sheet 3 of 6
TRAINING AND PCN EXAM PRICES (Level 1) Integrated Price (See Note (1)) Training and Price Discrete Prices (See Note (2)) Training Course PT1 11 800.00 6 900.00 7 000.00 13 900.00 MT1 11 900.00 7 200.00 7 000.00 14 200.00 UT1 23 900.00 19 300.00 7 500.00 26 800.00 UT1 (Incl Pipe Cat) 24 500.00 19 600.00 8 100.00 27 700.00 RT1 (Note 3) 26 500.00 21 300.00 8 100.00 29 400.00 ET1 18 120.00 14 250.00 7 000.00 21 250.00 WI1 24 000.00 20 300.00 7 000.00 27 300.00 (Level 2) Integrated Price (See Note (1)) Training and Price Discrete Prices (See Note (2)) Training Course PT2 12 200.00 8 100.00 7 300.00 15 400.00 MT2 12 300.00 8 300.00 7 300.00 15 600.00 UT2 (1/2 Cat) 22 500.00 16 600.00 8 400.00 25 000.00 UT2 (3/4 Cat) 23 400.00 16 600.00 9 400.00 26 000.00 RT2 22 400.00 16 500.00 9 500.00 26 000.00 ET2 18 400.00 12 900.00 7 300.00 20 200.00 WI2 27 500.00 23 100.00 7 500.00 30 600.00 RI 16 800.00 12 900.00 7 500.00 20 400.00 WT 10 500.00 6 800.00 7 500.00 14 300.00 Note (1) : Integrated Prices will apply when training courses and PCN exams are booked and paid for concurrently. Note (2) : Discrete Prices will apply when training courses and PCN exams are NOT booked concurrently. Note (3) : RT1 training course prices include one attempt for the radiation safety exam. Sheet 4 of 6
Product Technology (For Both Level 1 and Level 2) Product Technology (PRODT) Training and Price Training Course N/A 1 460.00 N/A N/A PRICES FOR REFRESHER TRAINING AND PCN EXAMS No separate prices will be quoted for refresher training. Refresher training will be presented as part of scheduled training. PRICES FOR EXAM REWRITES ANDTc End of Course Exam Rewrite (All methods, all levels, per exam part) 600.00 (Level 1) PCN Initial Exam 1 Paper 2 Papers Practical (See Note (4)) Recert PT1 7 000.00 3 900.00 5 000.00 4 000.00 4 000.00 MT1 7 000.00 3 900.00 5 000.00 4 000.00 4 000.00 UT1 7 500.00 3 900.00 5 000.00 4 500.00 4 000.00 UT1 (Incl Pipe Cat) 8 100.00 3 900.00 5 000.00 5 100.00 4 500.00 RT1 8 100.00 3 900.00 5 000.00 5 100.00 6 000.00 ET1 7 000.00 3 900.00 5 000.00 4 000.00 4 000.00 WI1 7 000.00 3 900.00 5 000.00 4 000.00 4 000.00 (Level 2) PCN Initial Exam 1 Paper 2 Papers Practical (See Note (4)) Recert PT2 7 300.00 4 000.00 5 100.00 4 200.00 6 000.00 MT2 7 300.00 4 000.00 5 100.00 4 200.00 6 000.00 UT2 (1/2 Cat) 8 400.00 4 000.00 5 100.00 5 300.00 6 000.00 UT2 (3/4 Cat) 9 400.00 4 000.00 5 100.00 6 300.00 6 000.00 RT2 9 500.00 4 000.00 5 100.00 6 400.00 7 000.00 ET2 7 300.00 4 000.00 5 100.00 4 200.00 6 000.00 WI2 7 500.00 4 000.00 5 100.00 4 400.00 6 000.00 RI 7 500.00 4 000.00 5 100.00 5 000.00 6 000.00 WT 7 500.00 4 000.00 5 100.00 4 400.00 6 000.00 Note (4) : If the Practical Exam is written together with either 1 or 2 theoretical papers, then an administrative discount of R2000-00 will apply. Sheet 5 of 6
TERMS AND CONDITIONS 1. Enrolling for a training course at ANDTc entitles each student to receiving a training experience that we believe is second to none, and includes the following: A comprehensive set of course notes and other publications. Field visits, for which we request students to contribute by means of providing transport. Access to our library of NDT publications and standards. End of course examinations. Unfortunately we have to charge a fee of R600 incl. vat per examination part (general, specific or practical paper) that has to be rewritten. Successful students will receive a certificate stating that the student has successfully completed a BINDT (British Institute of Non-Destructive Testing) accredited training course, that makes the student eligible to write the associated PCN examination. Please note that the PCN examination fee is not included in the course fee unless so quoted. A pack of essential stationary and measuring equipment without which no qualified NDT technician should be on site. Lunch, tea and coffee. 2. Course times are from 08:00 until 16:00. 3. Students that do not meet the eligibility requirements for a course but believe that they are capable of successfully completing the course should contact ANDTc. Some students may be required to attend preparatory course(s) before they will be allowed to enroll. 4. Enrolment 5. Cancellation A completed and signed enrolment form (QF-TRG-1095), together with proof of payment of 50% of the course fee, must be faxed to +27 (0) 12 665 4749 or emailed to examination@andtc.com or training@andtc.com. Provided that all eligibility conditions have been met, a student s enrolment will be confirmed in writing by ANDTc. On or before the first day of the course, the balance of 50% of the course fee, or proof of payment thereof, must be provided, otherwise attendance will not be allowed. Cheques are to be made payable to: African NDT Centre (Pty) Ltd. We have visa/mastercard facilities. Electronic payments/deposits can be made to: Bank: Nedbank Branch Code: 149745 Account Type: Current Account No: 1497101638 If cancellation of enrolment for a course is received more than 7 days prior to the commencement of the course, fees paid in advance will be credited towards a later date course in the same year. In case of late cancellation (less than 7 days prior to the commencement of the course) or non-attendance, 25% of the course fee will be retained. 6. As part of our training philosophy we endeavour to expose students to the latest NDT inspection equipment currently available. Due to the great diversity of inspection equipment in use, we do request that students for ultrasonic testing courses also bring their own equipment along when attending training. In some cases, having additional equipment available, may ensure that enrolment can be accepted. 7. ANDTc reserves the right, if there are insufficient enrolments 14 days prior to the commencement date of a course, to reschedule (or cancel) the course. 8. Training courses are presented in accordance with the principles contained in ANDTc s Training Scheme (Doc No QP-TRG-1045), which is available on request. Sheet 6 of 6