1-SERIES 1-25H I 1-30H I 1-35M I 1-35H 1 SERIES COMPACT TRACTORS MODELS Introduction of new Landini 1 SERIES 1-25H The LANDINI 1 SERIES is a new range of high performance, low maintenance and affordable tractors in a compact frame. The 1-25, 1-30, and 1-35 models represent the lower HP segment of the 1 SERIES, and range from 22 to 34 HP. These stylish and compact tractors are the perfect tool 1-30H for the landscaper, estate owner, or small farm operator. The 3 cylinder diesel engines are quiet, easy on fuel and environmentally friendly. The choice of mechanical or hydrostatic transmissions 1-35M 1-35H combined with standard features such as ergonomically positioned levers, flat platforms and suspended pedals, these tractors are a pleasure to operate. The 1 SERIES compacts will provide years of low maintenance, productive and worry free operation. Don t let the small frame fool you, these tractors are designed to do some serious work.
LANDINI 1-SERIES TECHNICAL DATA 1-25H HST, 4WD, OPEN 1-30H HST, 4WD, OPEN 1-35M GEAR, 4WD, OPEN 1-35H HST, 4WD, OPEN ENGINE Model Type Engine gross Displacement Rated revolution Fuel tank capacity cc (cu.in.) L. (u.s. gal) 3C100LWB 22 (16.4) 16.5 (12.1) 1007 (61.45) 2800 20 (5.28) 3A139LWH 28 (20.9) 20.5 (15.3) 1393 (85.0) 30 (7.9) 3A165LWM 34 (25.4) 27.6 (20.6) 1647 (100.5) 30 (7.9) 3A165LWH 34 (25.4) 26.5 (19.8) 1647 (100.5) 30 (7.9) DRIVE TRAIN Clutch Transmission Speeds Differential lock Brake Rear Mid (Optional) (HST) INF.2 (HST) INF.3 Dry dual 8F/8R (HST) INF.3 HYDRAULIC SYSTEM Pump Pump capacity (Max. flow rate) 3-point hitch Maximum lifting capacity (24"aft. of hitch) Hydraulic lift control system L./min (gpm) Gear 29 (7.66) 503 (1109) 48.3 (12.7) 800 (1764) Power 48.3 (12.7) 800 (1764) Power 48.3 (12.7) 800 (1764) Power TRAVELING SPEEDS Forward Reverse 0~14.97 (0~9.30) 0~10.48 (0~6.51) 0~21.03 (0~13.07) 0~9.15 (0~14.72) 1.57~24.00 (0.98~14.91) 1.38~21.15 (0.86~13.14) 0~21.03 (0~13.07) 0~9.15 (0~14.72) DIMENSIONS Overal length (includes 3-pt hitch) Overal width (minimum tread) Overal height (from top of ROPS) Overal height (from top of Cabin) Wheelbase Min. ground clearance Tread Front Tread Rear Min. turning radius (with brake) Weight with ROPS m (feet) 2684 (105.7) 1121 (44.1) 2185 (86.0) 1470 (57.9) 310 (12.2) 910 (35.8) 890-935 (35.0-36.8) 2.3 (7.5) 970 (2138) 3103 (122.2) 1387 (54.6) 2460 (96.8) 1680 (66.1) 351 (13.82) 1105 (43.5) 970-1302 (38.2-51.3) 2.9 (9.5) 1414 (3117) 3103 (122.2) 1387 (54.6) 2460 (96.8) 1680 (66.1) 351 (13.82) 1105 (43.5) 970-1302 (38.2-51.3) 2.9 (9.5) 1430 (3151) 3103 (122.2) 1387 (54.6) 2460 (96.8) 1680 (66.1) 351 (13.82) 1105 (43.5) 970-1302 (38.2-51.3) 2.9 (9.5) 1413 (3114) CANADA INC. www.landini.ca This literature has been published for worldwide circulation. The standard and optional equipment and the availability of individual models may vary from one country to the next. Landini reserves the right to undertake modifications without prior notice to the design and technical equipment at all times without this resulting in any obligation whatsoever to make such modifications to units already sold. While every effort is made to ensure that the specifications, descriptions and illustrations on this page are correct at the time of going to press, these are also subject to change without prior notice. Illustrations may show optional equipment or may not show all standard equipment.
1-SERIES 1-40M I 1-40H I 1-50M I 1-50H COMPACT &UTILITY TRACTORS MODELS Introduction of new Landini 1 SERIES 1-40M The LANDINI 1 SERIES is a new range of high performance, low maintenance and affordable tractors in a compact frame. The 1-40 and 1-50 models represent the medium HP segment of the 1 SERIES, and range from 41 to 49 HP. These stylish and compact utility tractors are the perfect tool for the landscaper, estate owner, as well as small to large farm operator. The 4 cylinder robust diesel engines are quiet, easy on fuel and environmentally friendly. The 1-40 & 1-50 models offer a variety of options to choice from. The ROPS version is standard, with an available deluxe cab with A/C and heat. The choice of mechanical or hydrostatic transmission is available, with the deluxe cab combined with the hydrostatic transmission being a true workhorse. features such as ergonomically positioned levers, flat platforms and suspended pedals, make these tractors a pleasure to operate. The 1 SERIES of compacts will provide years of low maintenance, productive and worry free operation. 1-40H 1-50M 1-50H Don t let the small frame fool you, these tractors are designed to do some serious work.
LANDINI 1-SERIES TECHNICAL DATA 1-40M GEAR, 4WD, ROPS 1-40H HST, 4WD, ROPS, CAB 1-50M GEAR, 4WD, ROPS 1-50H HST, 4WD, ROPS, CAB ENGINE Model Type Engine gross Displacement Rated revolution Fuel tank capacity cc (cu.in.) L. (u.s. gal) 4A200LWM 41 (30.5) 34 (25.3) 1999 (121.98) 4A200LWH 41 (30.5) 32.5 (24.2) 1999 (121.98) 4B243LWM 49 (36.6) 41.7 (30.7) 2435 (148.59) 4B243LWH 49 (36.6) 37.5 (27.9) 2435 (148.59) DRIVE TRAIN Clutch Transmission Speeds Differential lock Brake Rear Mid (Optional) None (HST) 3 Range HST None (HST) 3 Range HST HYDRAULIC SYSTEM Pump Pump capacity (Max. flow rate) 3-point hitch Maximum lifting capacity (24"aft. of hitch) Hydraulic lift control system L./min (gpm) TRAVELING SPEEDS Forward Reverse 1.5~25.3 (0.9~15.7) 1.4~23.8 (0.9~14.8) 0~25.1 (0~15.6) 0~17.6 (0~10.9) 1.5~25.3 (0.9~15.7) 1.4~23.8 (0.9~14.8) 1.5~25.3 (0.9~15.7) 1.4~23.8 (0.9~14.8) DIMENSIONS Overal length (includes 3-pt hitch) Overal width (minimum tread) Overal height (from top of ROPS) Overal height (from top of Cab) Wheelbase Min. ground clearance Tread Front Tread Rear Min. turning radius (with brake) Weight with ROPS and AG tire Weight with Cab and AG tire m (feet) 2415 (95.0) 1780 (3924) 2415 (95.0) 2445 (96.3) 1792 (3950) 1949 (4299) 2415 (96.2) 1800 (3968) 2415 (96.2) 2445 (96.3) 1785 (3935) 1980 (4365) CANADA INC. www.landini.ca This literature has been published for worldwide circulation. The standard and optional equipment and the availability of individual models may vary from one country to the next. Landini reserves the right to undertake modifications without prior notice to the design and technical equipment at all times without this resulting in any obligation whatsoever to make such modifications to units already sold. While every effort is made to ensure that the specifications, descriptions and illustrations on this page are correct at the time of going to press, these are also subject to change without prior notice. Illustrations may show optional equipment or may not show all standard equipment.
1-SERIES 1-55M I 1-75M I 1-90M 1 SERIES UTILITY TRACTORS MODELS Introduction of new Landini 1 SERIES 1-55M The LANDINI 1 SERIES is a new range of high performance, low maintenance and affordable tractors in a compact frame. The 1-55, 1-75, and 1-90 models represent the upper HP segment of the 1 SERIES, and range from 54 to 92 HP. These dependable and rugged utility tractors are the perfect tool for the landscaper, estate owner, as well as small or large farm operator. The 4 cylinder robust diesel engines are quiet, easy on fuel and environmentally friendly. The 1-55, 1-75 & 1-90 models have been designed to take on the toughest of chores with little effort. Whether your using the loader to feed your livestock, clearing snow from the driveway or bailing hay, the 1 SERIES has the right tractor for you. You'll be impressed by the high visibility, smooth handling, ergonomically positioned controls and abundance of power. Although reasonable in price, comfort and performance have not been compromised. In the 1 SERIES you'll get nothing less then a low maintenance, efficient and dependable workhorse. 1-75M 1-90M The 1 SERIES of utility tractors will provide years of productive and worry free operation.
LANDINI 1-SERIES TECHNICAL DATA 1-55M GEAR, 4WD, ROPS, CAB 1-75M GEAR, 4WD, CAB 1-90M GEAR, 4WD, CAB ENGINE Model Type Engine gross Displacement Rated revolution Fuel tank capacity cc (cu.in.) L. (u.s. gal) 4A220TLWB 54 (40.3) 45.2 (33.7) 2197 (134.1) 68 (18) 1104D-44T 74.4 (55.5) 60 (44.6) 4400 (268.5) 2200 125 (33.0) 1104D-44TT 91.2 (68) 78 (57) 4400 (268.5) 2200 125 (33.0) DRIVE TRAIN Clutch Transmission Speeds Differential lock Brake Rear /1000 (Rear only) F16/R16 (Rear only) Hydraulic, Independent/Ground /1000 HYDRAULIC SYSTEM Pump Pump capacity (Max. flow rate) 3-point hitch Maximum lifting capacity (24"aft. of hitch) Hydraulic lift control system L./min (gpm) 1st: 37.4 (9.88), 2nd: 16.4 (4.33) I 1204 (2654) 1st: 46.5 (12.3), 2nd: 37.1 (9.8) I 2400 (5290) 1st: 46.5 (12.3), 2nd 37.1 (9.8) I 2400 (5290) TRAVELING SPEEDS Forward Reverse 0.39~26.43 (0.24~16.42) 0.33~21.87 (0.21~13.59) 1st-1.76, 12th-31.18 (1.09~19.37) 1st-1.57, 12th-27.75 (0.98~17.24) 1st-0.24, 12th-34.01 (0.15~21.13) 1st-0.21, 12th-30.28 (0.13~18.82) DIMENSIONS Overal length (includes 3-pt hitch) Overal width (minimum tread) Overal height (from top of ROPS) Overal height (from top of Cab) Wheelbase Min. ground clearance Tread Front Tread Rear Min. turning radius (with brake) Weight with ROPS and AG tire Weight with Cab and AG tire m (feet) 3316 (130.5) 1760 (69.3) 2705 (106.5) 2530 (99.6) 1920 (75.6) 445 (17.5) 1461 (57.5) 1370 (53.9) 2.92 (9.6), without brake (3.56) 2175 (4795) 2350 (5180) 4120 (162.2) 1977 (77.8) 2750 (108.3) 2305 (90.7) 425 (16.7) 1516~1716 (59.7~67.6) 1565~1968 (61.6~77.5) 3.9 (12.8) 4039 (8905) 4120 (162.2) 1977 (77.8) 2750 (108.3) 2305 (90.7) 425 (16.7) 1516~1716 (59.7~67.6) 1565~1968 (61.6~77.5) 3.9 (12.8) 4039 (8905) CANADA INC. www.landini.ca This literature has been published for worldwide circulation. The standard and optional equipment and the availability of individual models may vary from one country to the next. Landini reserves the right to undertake modifications without prior notice to the design and technical equipment at all times without this resulting in any obligation whatsoever to make such modifications to units already sold. While every effort is made to ensure that the specifications, descriptions and illustrations on this page are correct at the time of going to press, these are also subject to change without prior notice. Illustrations may show optional equipment or may not show all standard equipment.