2 in1 SOL ARTUBE SIMPLE. FLEXIBLE. FAST. Flexible stainless steel pipe Solar UV resistant protective sheath Break joint for easy separation Integrated two-core sensor cable Closed cell elastomeric foam insulation SPECIFICALLY TO BE USED TO INSTALL FLOW & RETURN PIPES FROM SOLAR PANEL TO STORAGE TANK WWW.LIVINGGREENSOLAR.COM.AU
2 in1 SOLARTUBE FEATURES & BENEFITS ADVANTAGES spaces. Two closed cell elastomeric foam tubes of high temperature resistant EPDM are reliably protected against mechanical damage by a protecting UV Resistant coating. Flow & Return pipes can easily be separated without damaging the insulation or the protective coating. 2 in1 SOLARTUBE is the way to reduce installation time whilst ensuring a leak free installation. DESIGN OF THE CORRUGATED PIPES The corrugated stainless steel pipes have a wide pitch. Therefore, they are very malleable and easy to install. Even smallest bending radii can be obtained without a kink. The welding seams are free of annealing colour and the pipes are tested for 100% leak tightness. All pipe ends are cut neatly, free of burrs and are covered with plugs. INSULATION WITH UV RESISTANT PROTECTING SHEATH The insulation consists of two insulation tubes which are joined together by a tear resistant black protecting especially in spaces where the tube is bent. The two insulated pipes can easily be separated by cutting the ligament. The compatibility of the insulation material and the corrugated stainless steel pipes is guaranteed. (R.06 includes pipe and UV solar insulation when assessed in accordance with AS/NZS 4859.1, Para 2.3.3.8.) Components: 2 in1 SOLARTUBE corrugated stainless steel pipe (Grade: 1:4404 / AISI316L) UV Resistant, High Temperature closed cell EPDM (no CFC or HCFC) 2 in1 SOLARTUBE QUICK JOINT FITTINGS after you hear the «CLACK», which guarantees that the compression ring on the pipe is in the correct position, CLIMATE ZONE DOCUMENTATION Please see website for relevant information - www.livinggreensolar.com.au
2 in1 SOLARTUBE TECHNICAL INFORMATION Description elastomeric foam (EPDM) Water vapour resistance 4.500 according DIN EN 13469 # Insulating sheath Fire reaction: B2 class (according to DIN 4102) Manufacturing process R6 Value Free of CFC, HCFC, Formaldehyde and Cadmium # When assessed in accordance with AS/NZS 4859.1 Paragraph 2.3.3.8 Max working temperature +175 C intermittent (150 C continuous) * Min working temperature - 50 C * Flexible stainless steel pipe Thermal conductivity (λ) Particular characteristic: Thickness: Material: Temperature range: Max working pressure: at 0 C: 0,038 W/(mK) at 40 C: 0,042 W/(mK) UV resistance; without CFC and HCFC 15 mm ± 1 mm Stainless steel AISI 316L - Grade 1:4404 (X2CrNiMo 17122 according to EN 10088) -200 C to +600 C DN12-2000kPa DN16-1000kPa Conductor material: E-Cu ETP (according to DIN EN 13602) Two-core sensor cables Core insulation: Silicone type El 2 (according to DIN VDE 0207) Outer diameter: 2.15 mm Width (2 cables): 4.40 mm2 Section: 2 x 50mm Max working temperature: +180 C Min working temperature: - 40 C 2 in1 Quick Joint Fittings Max Working Temperature + 280 C Max Working Pressure 16bar Material Body: DZR CW602N brass / R Series Thread # According to DIN EN ISO 10380 (100kPa = 1bar)
2in1 SOLARTUBE PRODUCT INFORMATION WARRANTY 2in1 SOLARTUBE system Life expectansy of 2in1 SOLARTUBE system 10 Years 25 Years PRODUCT CODES DN12 CODE DN16 CODE 2in1 SOLARTUBE FITTINGS 1/2 Male Adaptor 0710110 1/2 Male Adaptor 0710118 3/4 Male Adaptor 0710111 3/4 Male Adaptor 0710119 1/2 Female Adaptor 0710113 1/2 Female Adaptor 0710120 3/4 Female Adaptor 0710114 3/4 Female Adaptor 0710121 DN12 Union 0710112 DN16 Union 0710122 1/2 Female Elbow 0710116 1/2 Female Elbow 0710123 3/4 Female Elbow 0710117 3/4 Female Elbow 0710124 12.7mm Copper Union 0710115 12.7mm Copper Union 0710125 2in1 SOLARTUBE PIPE DN12 X 20m Coil 0211220 DN16 x 20m Coil 0211220
2in1 SOLARTUBE QUICK JOINT FITTINGS INSTALLATION GUIDE Posizionare la lama nella scanalatura perpendicolarmente al tubo. Place the blade in the groove perpendicularly to the pipe. Il taglio deve essere netto, senza bave. The cut must be clean and without burrs. Non smontare il raccordo: qualora succedesse accidentalmente, il piede dell anello interno va in appoggio sul corpo raccordo. Do not disassemble the fitting: should this accidentally occur, the foot of the inner ring must be rested on the fitting body. Spingere il tubo nel raccordo fino ad avvertire lo scatto CLACK (fig. 6). Push the pipe into the fitting until the CLACK sounds (fig.6). Allentare manualmente il dado di circa 1/2 giro, salvo non lo sia già (fig. 5). Manually loosen the bolt by approximately 1/2 rev, unless is not already loose (fig.5).
AUSTRALIAN STANDARDS REFERENCE ATS - 5200.489.2009 In accordance with reference: AS/NZS - 3500.4.2003 AS/NZS - 14589.1.2002 Licence WM022290 IAPMO Oceana ABN: 65 808 115 387 SALES@LIVINGGREENSOLAR.COM.AU WWW.LIVINGGREENSOLAR.COM.AU T: 03 9708 2600 F: 03 9708 2700 M: 0432 397 799 6 NETWORK DRIVE CARRUM DOWNS VIC 3201