Version 1.0 2013-05-29 Author(s) Restrictions Abstract Reusch, Axel Public Document This AN shows how to integrate a VX1000 System A2L into INCA. Table of Contents 1.0 Overview... 1 1.1 Setup... 1 2.0 A2L Creation... 1 3.0 Establishing Communication in INCA... 2 3.1 Adding an A2L... 2 4.0 Contacts... 5 1.0 Overview This Application Note provides an overview of the steps required to get VX1000 System communication A2L working in INCA. 1.1 Setup For these instructions INCA version 7.1 was used. 2.0 A2L Creation Please ensure the generated A2L matches the required information for VX1000 System communication (XCP on Ethernet): Important: The correct IP address has to be specified within the A2L file as it cannot be adjusted within INCA. //for communication via TCP /begin XCP_ON_TCP_IP 0x0100 0x15B3 ADDRESS "192.168.2.5" /end XCP_ON_TCP_IP //for communication via UDP /begin XCP_ON_UDP_IP 0x0100 0x15B3 ADDRESS "192.168.2.5" /end XCP_ON_UDP_IP Copyright 2013 - Vector Informatik GmbH Contact Information: www.vector.com or +49-711-80 670-0 1
Communication with the VX1000 System cannot be established correctly if the A2L does not contain required information, such as mentioned above. An instruction for required contents is available. Note: INCA should be able to add an A2L which has been stored/exported from a working CANape VX1000 System project (Precondition: Communication in CANape via VX1000 System works as expected). 3.0 Establishing Communication in INCA The following steps have to be performed to get a connection to the ECU working with the VX1000 System: 3.1 Adding an A2L 1. The A2L has to be added in INCA as an ECU project. If possible and required, please also add the corresponding HEX file. 2. Add a corresponding Workspace. 3. Add the A2L (here "ExampleVXECU") to the workspace as a Project/Device. 2
4. Define the communication to be established as Ethernet-System XCP. 5. Create an Experiment. 6. The Workspace should look like this: Upon opening the experiment, communication with the ECU will be established using the VX1000 System. If some other tool is connected (CANape, VXConfig etc.), communication may not be successful. Communication may also be rejected by firewall settings or wrong network settings. Please check VXConfig for further information (INCA has to be closed). 3
7. Select the objects to be measured/calibrated. 8. Start measurement and calibrate, perform page switching (Reference Page/Working Page). Does everything work as expected? If not, please contact Vector's VX support: VXsupport@de.vector.com. 4
4.0 Contacts Germany and all countries not named below: Vector Informatik GmbH Ingersheimer Str. 24 70499 Stuttgart GERMANY Phone: +49 711-80670-0 Fax: +49 711-80670-111 E-mail: info@de.vector.com France, Belgium, Luxemburg: Vector France S.A.S. 168, Boulevard Camélinat 92240 Malakoff FRANCE Phone: +33 1 42 31 40 00 Fax: +33 1 42 31 40 09 E-mail: information@fr.vector.com Sweden, Denmark, Norway, Finland, Iceland: VecScan AB Theres Svenssons Gata 9 41755 Göteborg SWEDEN Phone: +46 31 764 76 00 Fax: +46 31 764 76 19 E-mail: info@se.vector.com United Kingdom, Ireland: Vector GB Ltd. Rhodium, Central Boulevard Blythe Valley Park Solihull, Birmingham West Midlands B90 8AS UNITED KINGDOM Phone: +44 121 50681-50 Fax: +44 121 50681-69 E-mail: info@uk.vector.com China: Vector Automotive Technology (Shanghai) Co., Ltd. Sunyoung Center Room 1701, No.398 Jiangsu Road Changning District Shanghai 200050 P.R. CHINA Phone: +86 21 6432 53530 Fax: +86 21 6432 5308 E-mail: info@cn.vector.com India: Vector Informatik India Pvt. Ltd. 4/1/1/1, Sutar Icon, Sus Road, Pashan, Pune - 411 021 INDIA Phone: +91 20 2587 2023 Fax: +91 20 2587 2025 E-mail: info@in.vector.com USA, Canada, Mexico: Vector CANtech, Inc. 39500 Orchard Hill Place, Suite 550 Novi, MI 48375 USA Phone: +1 248 449 9290 Fax: +1 248 449 9704 E-mail: info@us.vector.com Japan: Vector Japan Co. Ltd. Tennozu Yusen Bldg. 16F 2-2-20 Higashi-shinagawa, Shinagawa-ku, Tokyo 140-0002 JAPAN Phone: +81 3 5769 7800 Fax: +81 3 5769 6975 E-mail: info@jp.vector.com Korea: Vector Korea IT Inc. 5F, Gomoas bldg. 12 Hannam-daero 11-gil, Yongsan-gu Seoul, 140-889 REPUBLIC OF KOREA Phone: +82 2 807 0600 Fax: +82 2 807 0601 E-mail: info@kr.vector.com 5