Taking LED accent lighting to the next level. PHILIPS LIGHTOLIER,, VERTICAL, 0 W /600 LM 8 W /000 LM 32 W /2000 LM MULTI-HEAD CYLINDER, Complete unit Frame-in kit + Fixture + Reflector + optional accessories Project: Side profile measures 0 (2 mm) for 600 Location: /000 lm and () for 2000 lm. See specification sheet for additional drawings and information. Catalog No: Fixture Type: Mfg: Lamps: Qty: Notes: Frame-in kit example: H220 Accessories example: LLASNBK Series Lumens Heads Voltage Series Finish Fixture Alcyon LED recessed cylinder 600 / 000 lm 2 2000 lm H head H2 2 head H3 H4 4 head 20 20V 2 2V example: WH30H2 Series Finish Lumens CCT Heads Reflector Alcyon LED recessed cylinder WH White BK Black 0 600 lm 000 lm 2 2000 lm 2 200 K 30 3000 K 00 K Series Lumens Reflector LLAV H head H2 2 head H3 H4 4 head example: LLAV2RNS Accessory holder LLAVAH Alcyon LED 600/000lm LLAV2AH Alcyon LED 2000lm Snoot LLASN SNT6 Alcyon LED 600/000lm Alcyon LED 2000lm Diffusion filters LLAV Alcyon LED 600/000lm LLAV2 Alcyon LED 2000lm WH Matte White BK Matte Black WH Matte White BK Matte Black LS Linear Spread SY Symmetrical Spread SF Soft Focus FR Frosted Etched Color filters/gels Color gels provided by others for Alcyon LED 600 /000 lm ADF4 Alcyon LED 2000lm or Color gels provided by others Hex cell louver LLAHCA Alcyon LED 600/000lm AL4HC Alcyon LED 2000lm LLAV Alcyon LED reflector 600 / 000 lm 2 2000 lm RNS Narrow Spot RS Spot RNF Narrow flood RF Flood 02/4 page of 5
600 /000 lm 2000 lm 6 " 52 mm 2 " mm 0 2 mm side 9 6 " head side 2 head 52 mm 2 " 200 mm 8 " head 2 2 " 305 mm 9 3 mm 3 2 " 40 mm mm 6 9 5 2 " 3 3 mm 9 3 0 mm 9 5 2 2 mm 6 mm side 9 6 " head side 2 head 52 mm 2 " 200 mm 8 8 " " head 24 " 2 " 305 mm 9 3 mm 3 2004 mm mm 2 " 9 5 60 mm 2 " 3 3 mm 9 3 0 mm 9 5 2 2 mm 8 mm 6 mm 2 head 2 " 648 mm 2 0 mm 9 head side 2 head 4 head 8 " head 24 " 200 mm 4 mm 60 mm2 head 9 5 2 " 3 2 0 mm " 648 mm 2 200 2 " mm 305 9 3 mm 3 2 " 3 mm 5 6 " 2 mm 9 5 6 6 " " 9 3 6 mm 8 mm 2 0 mm 9 5 600 mm 638 mm 2 6 " 200 mm 9 3 head8 " 4 mm 9 2 " 2 6 mm 5 3 2 head 5 0 mm 600 mm 8 mm 638 mm 2 6 " 3 2 " 800 mm " 838 mm 4 " m 9 4 head 24 2 head " 60 mm 5 8 " 2 " 600 mm 648 mm 8 2 " 638 mm 0 mm 2 6 " 3 2 " 800 mm " 838 mm 5 6 " 89 mm 4 head 02/4 page 2 of 5
Features. LED Board: COB LED (600/000LM); 9 Tightly packed high brightness LED s (2000LM). 2. Heat Sink: Die-cast aluminum maintains LED junction temperature for minimum,000 hr lifetime at 0% lumen maintenance. 3. Finishes: Painted finishes with a baked enamel. Contains some powder coated finishes. 4. Heat Sink Arm: Tool-less aiming with horizontal rotation, 80º vertical tilt and a pull down adjustment from flush recessed to semirecessed for optimal performance. 5. Trim/Housing: One part integrated system including a seamless flange (6 ga powder coated steel), and pre-formed housing (22 ga powder coated steel), with prewired integral driver(s). 6. Frame with mounting brackets: Mounting brackets are adjustable vertically from inside of Frame-in-kit. Maximum ceiling thickness is ⅝". Accepts various types of mounting bars including C-channel, EMT (contractor supplied) and Lightolier mounting bars (Cat. # 9 or 9). For use in T-grid or sheet rock ceiling. See page 2 for overall dimensions.. Junction box: 4" x 3 ½" x 2" ;.063" (4 ga.) galvanized steel. 8. Thermal Protector: Meets NEC and UL requirements. Insulation must be kept 3" away from fixture sides and wiring compartments and must not be placed above fixture in a manner which will entrap heat. 9. Luminaire Disconnect: Power from Framein-kit to Trim/Housing connection with quick connect plug. 0. Torsion Springs and Safety Springs: Torsion Springs swivel to allow Trim/Housing to hang temporarily from one end to ease the process of making luminaire electrical connection complete. Safety Springs allow positive lock between Trim/Housing and Frame-in-kit for added security.. Interchangeable Optics: High efficiency metalized coating providing up to 98 % total reflectivity for optimal light quality, beam control and punch. Reflector has lens attached which protects reflector finish and LEDs from contamination. Tool-less installation. Reflector sold separately to allow field replacement. Various combinations of beam angles could be achieved with 4 optic offerings. Dimming Not available. Electrical Electronic power supply Input voltage: 20/2V, /60Hz Input power: 600lm ~ 0W/W (estimated) 000lm ~ 8W/9W (estimated) 2000lm ~ 32W/32W (estimated) High power factor: >0.9 CRI: 80-85 (typical) Labels culus Listed. Suitable for damp location (pending) Energy Star certified (pending). Title 24 (pending). Accessories are not Energy Star qualified. 5 year warranty. 02/4 page 3 of 5
Aiming angle L and W are the outer points where the candle power drops to % of the maximum. FC are the initial footcandles at the center of the beam. Data shown is for 3000K, for 200K multiply FC by 0.. L = Beam length W = Beam width D = Distance A = Aiming angle FC = Footcandles C = Distance to center beam CBCP = Center Beam Candle Power 0 horizontal aiming angle 30 horizontal aiming angle 30 vertical aiming angle 45 vertical aiming angle Beam spread (To % CBCP) 0RNS Narrow Spot 2,2,000 CBCP Rated Life (Hrs.) 92 85 63. 2.. 2. 4. 5. 80 4 2. 3.. 8. 0. 96 6 3 4. 5.. 2. 4 2 89 68 2... 0RS Spot 8 5,098,000 0RNF Narrow Flood 24 3,292,000 0RF Flood,96,000 80 2. 3. 2. 3. 3. 4. 5. 92 52 2. 3. 4. 3. 4. 2. 3. 4. 2. 3. 4. 3. 4. 5. 59 2 5 3. 4. 5. 3 3. 4. 3. 4. 3. 4. 26 20 4. 6.' 3. 4. 5. 3. 8. 3. 8. 3. 8. 59 03 46 26 6 6 2 5 0 4.' 5. 9.. 0. 4.. 2.. 2. 3. 4. 2. 3. 6. 200 3 29 3 4 32 28 9 2. 3. 4. 5. 5. 8.... 2. 3. 3. 4. 5. RNS Narrow Spot 0 2,,000 RS Spot 8 8,26,000 RNF Narrow Flood 24 5,0,000 RF Flood 3,006,000 85 6 2. 2. 2. 2. 9. 0. 98 44 2. 3. 3. 2. 2. 3. 0 29 83 2. 3. 2. 3. 3. 4. 5. 49 3 2. 3. 4. 3. 4. 9 2. 3. 4. 2. 3. 4. 3. 4. 5. 3. 4. 5. 20 6 4 3. 4. 3. 4. 3. 4. 3 4. 6.' 3. 4. 5. 8. 0. 3. 8. 3. 8. 3. 8. 09 6 9 5 4 58 0 39 94 5 3. 4. 5. 4.' 5. 9.. 0. 4.. 2. 2.. 2.. 2. 3. 4. 2. 3. 6. 24 20 95 3 83 8 98 2 8 66 30 2. 2. 2. 3. 4. 5. 5. 8... 2.0'... 2. 3. 3. 4. 5. All testing based on single head configurations. 02/4 page 4 of 5
Aiming angle L and W are the outer points where the candle power drops to % of the maximum. FC are the initial footcandles at the center of the beam. Data shown is for 3000K, for 200K multiply FC by 0.. L = Beam length W = Beam width D = Distance A = Aiming angle FC = Footcandles C = Distance to center beam CBCP = Center Beam Candle Power 0 horizontal aiming angle 30 horizontal aiming angle 30 vertical aiming angle 45 vertical aiming angle Beam spread (To % CBCP) 2RNS Narrow Spot,3,000 CBCP Rated Life (Hrs.) 20' 2 0 89 4 3. 3. 20' 2 9. 0.. 58 48 4.' 4. 5. 3. 4. 5.. 0 45 5. 6..' 3. 8 9 56 26 3. 2. 2RS Spot 6,5,000 2RNF Narrow Flood 24 9,94,000 2RF Flood 5,58,000 5 3. 4. 3. 4. 5. 9. 0 5 4. 5. 6. 3. 4.' 4. 5. 99 69 3. 4. 3. 4. 4. 5. 0 45 4. 5. 8 56 39 3. 6.. 3. 6.. 3. 4. 5. 0 36 8. 0. 4. 5.. 8. 8. 0. 8. 0. 3. 8. 29 83 38 4 44 28 6.. 9... 0. 4. 2. 3. 2. 3. 4. 2. 3. 6. 4 62 9 220 4 98 29 9 3. 4. 3. 4. 5. 6. 5. 8. 2. 3. 2. 3. 3. 4. 5. All testing based on single head configurations. 204 Koninklijke Philips N.V. All rights reserved. Specifications are subject to change without notice. www.philips.com/luminaires 02/4 page 5 of 5 Philips Lighting North America Corporation 200 Franklin Square Drive Somerset, NJ 0883 Phone: 8-486-226 Philips Lighting Company 28 Hillmount Road Markham ON, Canada L6C 2S3 Phone: 800-668-9008