for special requirements

HMI devices for special requirements /2 Introduction / Fully enclosed HMI devices /5 SIMATIC MP 77 PRO /8 SIMATIC Thin Client PRO /10 SIMATIC Flat Panel PRO /12 SIMATIC HMI IPC477C PRO /17 Accessories for fully enclosed HMI devices /17 Adapter sets /18 Extension units /19 IP65 keyboards /20 Single-port USB interface /21 /22 SIMATIC TP 177B INOX /27 SIMATIC MP 277 INOX / SIMATIC MP 77 INOX /8 SIMATIC Panel PC 677B INOX /45 SIMATIC HMI IPC677C INOX /51 HMI devices for hazardous areas /5 SIMATIC HMI Panel PC Ex /56 SIMATIC HMI Thin Client Ex Siemens ST 80 / ST PC 2011

HMI devices for special requirements Introduction Overview Fully enclosed HMI devices The fully enclosed SIMATIC HMI devices (MP 77 PRO, Thin Client PRO, Flat Panel PRO, and HMI IPC477C PRO) are specially designed for mounting on a support arm/stand. Thanks to their extremely rugged design, the devices are ideal for industrial applications in harsh environments. For special requirements, HMI devices with stainless steel fronts (TP 177B INOX, MP 277 INOX, MP 77 INOX, Panel PC 677B INOX and HMI IPC677C INOX) are offered for use in the food & beverage industry. HMI devices for hazardous areas The SIMATIC HMI Ex devices (HMI Panel PC Ex and HMI Thin Client Ex) are intrinsically safe Panel PCs and Thin Clients that have been specially developed for hazardous areas "Zone 1" and "Zone 2". Further SIMATIC HMI devices are also available for the hazardous area "Zone 2" and can be found in the chapter "Operator panels". /2 Siemens ST 80 / ST PC 2011

HMI devices for special requirements Fully enclosed HMI devices Introduction Overview The new SIMATIC fully enclosed HMI devices have been specially designed for mounting on a support arm/foot. Thanks to their extremely rugged design, the devices are ideal for industrial applications even in harsh environments. The following are available as SIMATIC fully enclosed HMI devices: SIMATIC MP 77 PRO 15" Touch SIMATIC Thin Client PRO 15" Touch SIMATIC Flat Panel PRO 15"/19" Touch SIMATIC HMI IPC477C PRO 15"/19" Touch Benefits For direct mounting on supporting arm/foot Fully enclosed with IP65, enclosure type 4X Low depth and weight of the device Connection of the device optionally from above or below Total flexibility in the selection of supporting arm components thanks to direct connection to well-known supporting arm manufacturers Supports the globally established VESA 75/VESA 100 standard Service-friendly device does not have to be removed from the supporting arm for servicing or replacing memory cards Rugged and extremely compact aluminum enclosure Functionally 100%-compatible with the field-proven built-in units Standard connecting cables can be used Application The SIMATIC HMI PRO (PRO = protected) devices have been designed for mounting on a support arm/foot. Thanks to their rugged aluminum enclosures, the SIMATIC HMI PRO devices have all-round IP65 protection and are also suitable for use in harsh environments. The separation of HMI and control cabinet allows flexible design concepts. The new SIMATIC HMI PRO devices are used wherever the HMI device cannot be installed direct in the control cabinet due to restricted space, or whenever an operator unit is required direct at the machine. The devices stand out not only due to their compact and appealing industrial design, but also due to their refined mechanical features. This enables the device to be connected to the support arm system optionally from above or below. A host of support arm systems from well-known manufacturers are supported here. The SIMATIC HMI PRO devices are also suitable for connection to systems in accordance with VESA 75 and VESA 100. With the extension units, the range of possible on-site operations can be extended. The extension units can be mounted on the right and/or left side of the SIMATIC HMI PRO device and can be equipped individually with, for example, illuminated pushbuttons, emergency stop button, RFID reader, etc. The SIMATIC HMI PRO devices are extremely light-weight at between 6.5 kg and 10 kg (depending on the device) and can thus be installed quickly and easily. All the devices are fan-free, and only standard connecting cables are used. Siemens ST 80 / ST PC 2011 /

HMI devices for special requirements Fully enclosed HMI devices Introduction Siemens AG 2011 Design General Degree of protection IP65 (front and rear) Degree of protection Enclosure Type 4X (front and rear) Die-cast aluminum housing Compact design with low mounting depth 15.1" TFT color display, 1024 x 768 pixels (XGA) 19" TFT color display, 1280 x 1024 pixels (SXGA) Resistive analog touch screen Terminals for 24 V DC power supply Flat Panel PRO/HMI IPC477C PRO Also available as 19" TFT color display, 1280 x 1024 pixels (XGA) Additional 20 V AC power supply (only Flat Panel PRO) Accessories For fully enclosed HMI devices there are available: adapter sets extension units IP65 keyboards and a 1-port USB interface. Integration Mechanical integration The SIMATIC HMI PRO devices can be mounted direct on the support arm head of the desired support arm system using the basic adapter supplied and an adapter plate to be ordered separately. The basic adapter is attached to the device optionally from below or from above. The connecting cables are run through the support arm. More information Additional information is available on the Internet at: www.siemens.com/ip65-hmi-devices Note: Do you require a specific modification or extension to the products described here? Under "Customized products", you can find information about additional and generally available products for the sector, and about the possibilities for customized modification and adaptation. Function SIMATIC MP 77 PRO: Multi Panel for operator control and monitoring of machines and plants SIMATIC Thin Client PRO: Operator panel for terminal and web client applications SIMATIC Flat Panel PRO: Industrial monitor with touch functionality, can be located up to 0 m from the operator control unit (as with Flat Panel Extended) SIMATIC HMI IPC477C PRO: Compact, rugged and maintenance-free embedded IPC /4 Siemens ST 80 / ST PC 2011

HMI devices for special requirements Fully enclosed HMI devices SIMATIC MP 77 PRO Overview SIMATIC MP 77 PRO 15" Application The SIMATIC Multi Panel 77 PRO can be used wherever operation and monitoring of machines and plants are required. As an especially high-performance device, the Multi Panel is suitable for demanding HMI tasks. However, in addition to visualization, the devices can also handle other automation tasks such as providing the platform for a software PLC. The SIMATIC Thin Client PRO is ideally suitable as a second, low-cost operator console on a MP 77 PRO. Integration Integrated interfaces SIMATIC MP 77 PRO: 2 x Ethernet The integrated Ethernet interfaces are used for IT communication and for data exchange with programmable controllers such as SIMATIC S7 PROFIBUS/MPI (RS 485/ RS 422) The floating PROFIBUS interface (12 Mbit/s) is used for connecting distributed field devices or for connecting to SIMATIC S7 Further interfaces Two USB 2.0 interfaces (Universal Serial Bus), one CompactFlash Card interface, and one SD/MMC slot are available for connecting further I/O devices. Technical specifications 6AV6 644-2AB01-2AX0 Display Size 15" (04.1 mm x 228.1 mm) Display type TFT, 6556 Farben Resolution (pixels) Resolution (WxH in pixel) 1024 x 768 Backlighting MTBF backlighting (at 25 C) about 50,000 hours Control elements Control elements Touch screen Connection for mouse/keyboard/ USB / USB / USB barcode reader Keyboard Numeric/alphabetical input / Touch operation Touch screen analog, resistive Supply voltage Input voltage permissible range Supply voltage Input current Rated current Memory Type Type of output Acoustics Time of day Clock Type Interfaces Interfaces USB port CF card slot Multi Media Card slot Industrial Ethernet Industrial Ethernet interface Protocols Protocols (terminal link) Sm@rtAccess +20.4 V to +28.8 V DC 24 V DC 1.8 A Flash / RAM Sound signal Hardware clock, battery backup, synchronizable 1 x RS422, 1 x RS485, 2 x Ethernet (RJ45) 2 x USB 1 x CF card slot 1 x Multi Media Card slot 2 x Ethernet (RJ45) Ambient conditions Operating temperature Operation (vertical installation) 0 C to +45 C Operation (max. tilt angle) 0 C to +45 C Storage/transport temperature Transport, storage -20 C to +60 C Relative humidity max. relative humidity 85 % Mounting position vertical maximum permissible angle of inclination without external ventilation +/- 45 Degree and class of protection Front IP65, NEMA 4 (when installed) Rear IP65 Standards, approvals, certificates Certifications CE, culus, C-TICK, NEMA 4 Operating systems Operating system Windows CE Configuration Configuration software Configuration tool Functionality under WinCC flexible Applications/options 6AV6 644-2AB01-2AX0 see "Configuration overview" from page 2/ see chapter 4: HMI software/ SIMATIC WinCC flexible options and SIMATIC WinCC options (TIA portal) Number of Visual Basic Scripts 100 Task planner Help system Status/control with SIMATIC S7 Siemens ST 80 / ST PC 2011 /5

HMI devices for special requirements Fully enclosed HMI devices SIMATIC MP 77 PRO Siemens AG 2011 Technical specifications (continued) With alarm logging system (incl. buffer and acknowledgment) Number of messages 4000 Bit messages Analog messages Message buffer Ring buffer (n x 1024 entries), retentive, maintenance-free Recipes Recipes 500 Data records per recipe 1000 Entries per data record 1000 Recipe memory 128 KB integrated Flash, expandable Number of process images Process images 500 Variables 2048 Limit values Multiplexing Image elements Text objects 0,000 text elements Graphics object Bit maps, icons, vector graphics dynamic objects Diagrams, bar graphs, sliders, analog display, invisible buttons Lists Text lists 500 Graphics list 500 Libraries Archiving Number of archives per project 50 Number of measuring points per 50 project Number of entries per archive 50 000 Archiving types Sequence archive, short-term archive, alarm log, process value archive Memory location CF card, SD/MMC card, Ethernet Data storage format CSV file, readable, e.g. with MS Excel, MS Access external evaluation Can be read, e. g., in MS Excel, MS Access, etc. Size of archive Depending on free memory on ext. card/stick or on free hard disk memory via network drive Online evaluation Using trend curves Security Number of user groups 50 Passwords exportable Number of user rights 2 Data carrier support CF card Multimedia Card Recording Recording/Printing Alarms, report (shift report), color print, hardcopy Printer driver ESC/P2, PCL/PCL6 Fonts Keyboard fonts US American (English) Languages Configuration languages Character sets 6AV6 644-2AB01-2AX0 D, GB, F, I, E, CHN "traditional", CHN "simplified", DK, FIN, GR, J, KP / ROK, NL, N, PL, P, RUS, S, CZ / SK, TR, H Tahoma, Arial, Courier New, symbol languages, 4 additional character sets can be loaded, all freely scalable Transfer (upload/download) Transfer of configuration Process coupling Connection to controller Expandability/openness Open Platform Program I/O I/O devices Dimensions and weight Dimensions Front of enclosure (W x H) Mounting cutout/device depth (W x H) Weight Weight Ordering data 6AV6 644-2AB01-2AX0 Order No. Note: An adapter plate is necessary for installation, see "Fully protected HMI devices." MPI/PROFIBUS DP, serial, USB, Ethernet, by means of external storage medium, automatic transfer recognition see "System interfaces" from page 2/179 Printer, card reader, barcode reader 400 mm x 10 mm 400 mm x 10 mm/98.5 mm device depth 7.25 kg SIMATIC MP 77 PRO 15" E 6AV6 644-2AB01-2AX0 Touch 15" color TFT display, 12 MB configuration memory, configurable from WinCC flexible 2007 E: Subject to export regulations: AL: 9I999 and ECCN: 5D002ENCU /6 Siemens ST 80 / ST PC 2011

HMI devices for special requirements Fully enclosed HMI devices SIMATIC MP 77 PRO Dimensional drawings All specifications in mm. Panel cutout see technical specifications. 400 More information Additional information is available on the Internet at: www.siemens.com/ip65-hmi-devices Note: Do you require a specific modification or extension to the products described here? Under "Customized products", you can find information about additional and generally available products for the sector, and about the possibilities for customized modification and adaptation. 10 98.5 67.85 G_ST80_XX_0051 SIMATIC MP 77 PRO 15" Touch Siemens ST 80 / ST PC 2011 /7

HMI devices for special requirements Fully enclosed HMI devices SIMATIC Thin Client PRO Siemens AG 2011 Overview SIMATIC Thin Client PRO 15" Application The SIMATIC Thin Client PRO is ideal as a second, low-cost operator console for terminal and client applications. Design Thin Client PRO 15" Touch All-round IP65 protection Enclosure type 4x/type 12 (indoor use only) For mounting on support arm/foot 15" touch display Rugged die-cast aluminum enclosure Adaptation of the device optionally from above or below Direct connection to support arm systems of well-known manufacturers (Rittal, Bernstein, Rose, Haseke, and Rolec) Supports the globally established VESA 75/ VESA 100 standard Integration Integrated interfaces SIMATIC Thin Client PRO: 1 x Ethernet interface For operating on PROFINET and Ethernet networks 1 x USB interface For connecting mouse and keyboard as external input devices Technical specifications 6AV6 646-2AB21-2AX0 Product type designation PRO 15" Touch Display Size 15.1" Display type TFT, 6556 Farben Resolution (pixels) Resolution (WxH in pixel) 1024 x 768 Backlighting MTBF backlighting (at 25 C) about 50,000 hours Control elements Control elements Connection for mouse/keyboard/ barcode reader Touch operation Touch screen Supply voltage Input voltage permissible range Supply voltage Processor Processor Memory Type Usable memory for user data Interfaces Interfaces USB port Industrial Ethernet Industrial Ethernet interface Protocols WEB characteristics HTTP HTML CSS Protocols (terminal link) Sm@rtAccess RDP EMC Emission of radio interference acc. to EN 55 011 Emission of radio interferences acc. to EN 55 011 (limit class A) Touch screen USB / USB analog, resistive +19.2 V to +28.8 V DC 24 V DC ARM, 266 MHz Flash / RAM No info 1 x Ethernet (RJ45) 1 x USB 1 x Ethernet (RJ45) ; EN 61000-6-4, interference emission: Intended for use in industrial areas. Ambient conditions Operating temperature Operation (vertical installation) 0 C to +45 C Storage/transport temperature Transport, storage -20 C to +60 C Relative humidity max. relative humidity 85 %; (Storage) maximum permissible angle of inclination without external ventilation +/- 45 Degree and class of protection Front IP65, NEMA 4x, NEMA 12 (when installed) Rear IP65 Standards, approvals, certificates Certifications Dimensions and weight Dimensions Front of enclosure (W x H) Weight Weight 6AV6 646-2AB21-2AX0 CE, culus, C-TICK, NEMA 4x (Enclosure Type 4X, Type 12), NEMA 12 400 mm x 10 mm 6.5 kg /8 Siemens ST 80 / ST PC 2011

HMI devices for special requirements Fully enclosed HMI devices SIMATIC Thin Client PRO Ordering data SIMATIC Thin Client PRO 15" Touch Starter packages SIMATIC Thin Client with Sm@rtAccess Touch device 15" PRO with Sm@rtAccess license (panels) Touch device 15" PRO with Sm@rtAccess license for WinCC flexible 2008 Runtime D D D Order No. 6AV6 646-2AB21-2AX0 6AV6 65-6CA01-2AA0 6AV6 65-6FA01-2AA0 D: Subject to export regulations: AL: N and ECCN: 5D992 More information Additional information is available on the Internet at: www.siemens.com/ip65-hmi-devices Note: Do you require a specific modification or extension to the products described here? Under "Customized products", you can find information about additional and generally available products for the sector, and about the possibilities for customized modification and adaptation. Note: An adapter plate is necessary for installation, see "Fully protected HMI devices." Dimensional drawings All specifications in mm. Panel cutout see technical specifications. 400 10 90.85 67.85 G_ST80_XX_0050 SIMATIC Thin Client PRO 15" Touch Siemens ST 80 / ST PC 2011 /9

HMI devices for special requirements Fully enclosed HMI devices SIMATIC Flat Panel PRO Siemens AG 2011 Overview SIMATIC Flat Panel Monitor PRO 19" SIMATIC Flat Panel Monitor PRO 15" with expansion unit (rear view) Design SIMATIC Flat Panel monitors are highly suitable as remote operator stations for Rack/Box IPCs. They can be mounted directly on a supporting bracket up to 0 m away from the IPC. Alternatively, Flat Panel monitors can be used as a 2nd operator control unit on a Panel PC such as the HMI IPC477C. Technical specifications Flat Panel PRO 15" PRO 19" Supply voltage Supply voltage 24 V DC and 20 V AC combined 24 V DC and 20 V AC combined permissible frequency range 47 to 6 Hz 47 to 6 Hz Power consumption, max. 5 VA 5 VA General features Can be separate from the computer up to 0 m up to 0 m Display On-screen display (OSD) configuration Display version 15" TFT 19" TFT visible area (H x W) in mm 04 x 228 76 x 01 Viewing angle 140 x 120 (min) Pixel pitch 0.297 mm x 0.297 mm 140 x 120 (min) 0.297 mm x 0.297 mm Resolution (W x H in pixels) 1024 x 768 1280 x 1024 Refresh rate 60 to 75 Hz 60 to 75 Hz Line frequency 46.7-80 khz 46.7-80 khz Brightness/contrast > 260 cd/m 2 / 50:1 > 00 cd/m 2 / 00:1 Number of colors 16.7 million 16.7 million MTBF of backlit display (at 25 C, 50,000 h 50,000 h 24 hours continuous operation) Type of operation Touch screen analogresistive analogresistive Connection for keyboard/mouse/ barcode reader, via USB, via USB Degree of protection Certifications & standards Certification Overall device IP65/enclosure type 4x/type 12 (indoor use only) culus (UL 508), NEMA4-tested EMC CE EN 55011 class A Overall device IP65/enclosure type 4x/type 12 (indoor use only) culus (UL 508), NEMA4-tested CE EN 55011 class A Integration Integral interfaces SIMATIC Flat Panel PRO: Standard VGA interface, 15-pin Sub-D Digital DVI-D interface USB interface up to max. 0 m distance from PC unit 2 x USB interfaces for connecting local I/Os (e. g. mouse, keyboard) or mass storage devices such as USB flash drives /10 Siemens ST 80 / ST PC 2011

HMI devices for special requirements Fully enclosed HMI devices SIMATIC Flat Panel PRO Technical specifications (continued) Dimensional drawings Flat Panel PRO 15" PRO 19" Standards, approvals, certificates All specifications in mm. Panel cutout see technical specifications. CE mark UL approval 400 Ambient conditions Vibration load during operation 1 g (10 m/s²) 1 g (10 m/s²) Shock loading during operation 5 g (50 m/s²) 5 g (50 m/s²) Temperature Ambient temperature during operation 5 to +45 C 5 to +45 C 10 Mounting Inclination angle Interfaces Graphics interface +/- 45 from the vertical Standard VGA interface 15-pin sub-d/digital DVI-D interface +/- 45 from the vertical Standard VGA interface 15-pin sub-d/digital DVI-D interface 90.85 Interface for Touch USB (V1.1) USB (V1.1) USB interface for touch screen Dimensions External dimensions (W x H x D) 400 mm x 10 mm x 91 mm 48 mm x 400 mm x 105 mm SIMATIC Flat Panel PRO 15" Touch 67.85 G_ST80_XX_0050 Weight Weight 6.7 kg 10 kg 48 Ordering data Order No. SIMATIC Flat Panel PRO A 6AV7 861-5TB10-1BA0 15" Touch SIMATIC Flat Panel PRO 19" Touch A 6AV7 861-6TB10-1BA0 A: Subject to export regulations: AL: N and ECCN: EAR99H SIMATIC FLAT PANEL 400 105 82 G_ST80_XX_0071 SIMATIC Flat Panel PRO 19" Touch More information Additional information is available on the Internet at: www.siemens.com/ip65-hmi-devices Note: Do you require a specific modification or extension to the products described here? Under "Customized products", you can find information about additional and generally available products for the sector, and about the possibilities for customized modification and adaptation. Siemens ST 80 / ST PC 2011 /11

HMI devices for special requirements Fully enclosed HMI devices SIMATIC HMI IPC477C PRO Siemens AG 2011 Overview SIMATIC HMI IPC477C PRO 19" Application The SIMATIC HMI IPC477C PRO is a compact, high-performance and maintenance-free embedded Panel PC the ideal platform for PC-based Automation on the support arm with WinCC flexible, WinAC RTX / WinAC RTX F or WinCC Client/ single-user station. Integration Configuration and integrated interfaces SIMATIC HMI IPC477C PRO: Intel Core2 Duo to Celeron 1.2 GHz (all without fan) 1 GB to 4 GB RAM 2 GB to 8 GB CF card or 2 GB SSD with Windows XP embedded PROFIBUS or PROFINET with IRT onboard (each optional) 2 x or 1 x Ethernet onboard (10/100/1000 Mbit) 4 x USB 2.0 connection 1 x DVI-I Preinstalled SIMATIC WinCC flexible, WinAC RTX, or WinCC 7 client or single-user system SIMATIC HMI IPC477C PRO 19" (rear view) /12 Siemens ST 80 / ST PC 2011

HMI devices for special requirements Fully enclosed HMI devices SIMATIC HMI IPC477C PRO Technical specifications 6AV7 88-6.- 0 6AV7 88-7.- 0 General features Supply voltage 24 V DC 24 V DC Processors Intel Celeron M 1.2 GHz, Intel Core 2 Solo 1.2 GHz or Core 2 Duo 1.2 GHz Intel Celeron M 1.2 GHz, Intel Core 2 Solo 1.2 GHz or Core 2 Duo 1.2 GHz Memory type DDR-RAM DDR-RAM Main memory 1 GB, 2 GB or 4 GB 1 GB, 2 GB or 4 GB Free slots 1 x CF card slot (externally accessible) 1 x CF card slot (externally accessible) Operating system Windows Embedded Standard 2009 or Windows XP Professional Multi Language Windows Embedded Standard 2009 or Windows XP Professional Multi Language Additional OS information Language: En/Ger Language: En/Ger SIMATIC Software Optionally with preinstalled bundle software SIMATIC WinCC flexible 2008 SP1 and/or WinAC RTX 2009 SIMATIC WinAC RTX F SIMATIC WinCC as web client or standard client Optionally with preinstalled bundle software SIMATIC WinCC flexible 2008 SP1 and/or WinAC RTX 2009 SIMATIC WinAC RTX F SIMATIC WinCC as web client or standard client Drives Floppy drive optional via external USB floppy drive optional via external USB floppy drive Optical drives possible as an external drive via USB possible as an external drive via USB Hard disk/mass storage Interfaces Graphics interface Compact Flash Drive with 2, 4 or 8 GB and/or SSD (Solid State Disk) with 2 GB DVI-I can be used for additional display unit (only VGA via adapter); 2-bit color depth, graphics memory up to 128 MB; resolution as for integrated display in each case Compact Flash Drive with 2, 4 or 8 GB and/or SSD (Solid State Disk) with 2 GB DVI-I can be used for additional display unit (only VGA via adapter); 2-bit color depth, graphics memory up to 128 MB; resolution as for integrated display in each case Connection for keyboard/mouse USB / USB USB / USB serial interface COM1: 1 x V.24 (RS22) COM1: 1 x V.24 (RS22) PROFIBUS/MPI Optionally onboard, isolated, max. 12 Mbit/s, no plug-in card required, CP5611-compatible, not upgradable Optionally onboard, isolated, max. 12 Mbit/s, no plug-in card required, CP5611-compatible, not upgradable PROFINET (RT/IRT) Optional: x RJ45, CP1616-compatible; not for retrofitting Optional: x RJ45, CP1616-compatible; not for retrofitting USB 4 x on rear, USB 2.0 (500 ma) 4 x on rear, USB 2.0 (500 ma) PROFINET (IE), Ethernet onboard, 2 x 10/100/1000 Mbit (RJ45 without/ with PROFIBUS), 1 x 10/100/1000 Mbit (RJ45 with PROFINET), no plug-in card necessary onboard, 2 x 10/100/1000 Mbit (RJ45 without/ with PROFIBUS), 1 x 10/100/1000 Mbit (RJ45 with PROFINET), no plug-in card necessary Multimedia No No Siemens ST 80 / ST PC 2011 /1

HMI devices for special requirements Fully enclosed HMI devices SIMATIC HMI IPC477C PRO Siemens AG 2011 Technical specifications (continued) 6AV7 88-6.- 0 6AV7 88-7.- 0 Monitoring functions Temperature Watchdog DiagBit (similar to S.M.A.R.T.) (for CF cards and SSD) (for CF cards and SSD) Status LEDs Front side according to EN 60529 IP65 all-round to EN 60529 and NEMA4 IP65 all-round to EN 60529 and NEMA4 Ambient conditions Vibration load during operation Tested according to IEC 60068-2-6: 10 to Tested according to IEC 60068-2-6: 10 to 58 Hz: 0.075 mm, 58 to 200 Hz: 9.8 m/s² (1 g) 58 Hz: 0.075 mm, 58 to 200 Hz: 9.8 m/s² (1 g) Shock loading during operation Tested according to IEC 60068-2-7: 50 m/s² (5 g), 0 ms, 100 shocks Relative humidity Tested according to IEC 68-78, IEC 60068-2-0: 5 % to 80 % at 25 C (no condensation) Tested according to IEC 60068-2-7: 50 m/s² (5 g), 0 ms, 100 shocks Tested according to IEC 68-78, IEC 60068-2-0: 5 % to 80 % at 25 C (no condensation) Maximum permissible installation angle +/- +/- 45 from the vertical +/- 45 from the vertical Ambient temperature 0 C to 45 C 0 C to 40 C Certifications & standards Approvals CE, culus(508) CE, culus(508) EMC CE, 55022A, EN 61000-6-4, EN 61000-6-2 CE, 55022A, EN 61000-6-4, EN 61000-6-2 Degree of protection Overall device IP65/enclosure type 4x/type 12 (indoor use only) Overall device IP65/enclosure type 4x/type 12 (indoor use only) Dimensions 400 mm x 10 mm x 98 mm 48 mm x 400 mm x 115 mm Weight 7.4 kg 10.9 kg /14 Siemens ST 80 / ST PC 2011

HMI devices for special requirements Fully enclosed HMI devices SIMATIC HMI IPC477C PRO Ordering data Order No. Order No. IPC477C PRO as "Built to Order" versions (max. delivery time is 15 working days and with identified repair). Configuration SIMATIC HMI IPC477C PRO E 6AV7 88-7 A 7 7 7-7 7 7 0 embedded and without fan, fully enclosed according to IP65; 5 x (500 ma), one of which on the front 24 V DC power supply with On/Off switch Front panels 15" TFT Touch 6 19" TFT Touch 7 Processors and fieldbus Celeron M 1.2 GHz, A 2 x PROFINET (IE) Celeron M 1.2 GHz, B 2 x PROFINET (IE), 1 x PROFIBUS DP 12 Core2 Solo 1.2 GHz, D 2 x PROFINET (IE) Core2 Solo 1.2 GHz, E 2 x PROFINET (IE), 1 x PROFIBUS DP 12 Core2 Solo 1.2 GHz, F 1 x PROFINET (IE), 1 x PROFINET (RT/IRT) ( ports) Core2 Duo 1.2 GHz, G 2 x PROFINET (IE) Core2 Duo 1.2 GHz, H 2 x PROFINET (IE), 1 x PROFIBUS DP 12 Core2 Duo 1.2 GHz, J 1 x PROFINET (IE), 1 x PROFINET (RT/IRT) ( ports) Main memory (DDR RAM), 1 database 1 GB 1 2 GB 2 4 GB Mass storage replaceable (formatted in a partition) without 0 CompactFlash 2 GB 2 CompactFlash 4 GB CompactFlash 8 GB 4 SSD (Solid State Disk), 6 min. 2 GB E: Subject to export regulations: AL: 9I999 and ECCN: 5D002ENCU Configuration (continued) SIMATIC HMI IPC477C PRO E 6AV7 88-7 A 7 7 7-7 7 7 0 Mass storage (installed, Windows Embedded Standard 2009 (Ger/En) preinstalled, optionally with SIMATIC software) CompactFlash 2 GB 2 CompactFlash 4 GB CompactFlash 8 GB 4 SSD (Solid State Disk), 6 min. 2 GB Operating system (preinstalled and activated) Windows Embedded Standard B A 2009 Windows XP Professional D A Multi-Language, only with SSD; without SIMATIC software Windows Embedded E A Standard 7, preinstalled on drive intern, CF > 4 GByte, SSD Windows 7 Ultimate, MUI G A (En, Ger, Fr, It, Sp) preinstalled on SD Software packages with CF 4 GB or higher 1) with operating system and RTX B B WinAC RTX 2010 pre-installed and configured with operating system and HMI, WinCC flexible 2008 SP2 RT (incl. archives/recipes) preinstalled and configured - Number of tags 128 PT B C - Number of tags 512 PT B D - Number of tags 2048 PT B E - Number of tags 4096 PT B F with operating system and HMI/RTX, WinCC flexible 2008 SP2 RT (incl. archives/recipes) and WinAC RTX 2010 pre-installed and configured - Number of tags 128 PT B K - Number of tags 512 PT B L - Number of tags 2048 PT B M - Number of tags 4096 PT B N with operating system and RTX F B P WinAC RTX F 2010 pre-installed and configured with operating system and HMI/RTX F 1), WinCC flexible 2008 SP2 RT (incl. archives/recipes) and WinAC RTX F 2010 pre-installed and configured - Number of tags 128 PT B R - Number of tags 512 PT B S - Number of tags 2048 PT B T 1) Preferred versions with repaired replacement device from warehouse Siemens ST 80 / ST PC 2011 /15

HMI devices for special requirements Fully enclosed HMI devices SIMATIC HMI IPC477C PRO Siemens AG 2011 Dimensional drawings All specifications in mm. Panel cutout see technical specifications. 48.7 More information Additional information is available on the Internet at: www.siemens.com/ip65-hmi-devices Note: Do you require a specific modification or extension to the products described here? Under "Customized products", you can find information about additional and generally available products for the sector, and about the possibilities for customized modification and adaptation. 105 400 G_ST80_XX_00400 SIMATIC HMI IPC477C PRO 15" Touch version 119 400 482.7 78.85 81.85 G_ST80_XX_00401 SIMATIC HMI IPC477C PRO 19" Touch version /16 Siemens ST 80 / ST PC 2011

HMI devices for special requirements Accessories for fully enclosed HMI devices Adapter sets Overview Ordering data Order No. Adapter sets VESA 100 adapter set 1) for A 6AV7 674-0KD00-0AA0 VESA 100 The adapter sets are required for connecting the SIMATIC Rose GTN II HMI PRO device with the support arm head of the respective support arm system By directly connecting the support arm head to the device, VESA 75 adapter set for VESA 75 A 6AV7 674-0KE00-0AA0 there is complete flexibility in the choice of support arm components A: Subject to export regulations: AL: N and ECCN: EAR99H 1) Adapter sets are available for the VESA 75 and VESA 100 The VESA 100 adapter set cannot be used in combination with the 19" Flat Panel PRO. systems. Further adapter sets can be obtained directly from the Note: respective supporting bracket manufacturer: Bernstein, Rittal, Rose and Haseke The internal diameter of the 48 mm supporting bracket tubes is not suitable for passage of the standard DVI-D cable. Integration Scope of delivery: The adapter sets are connected to the SIMATIC HMI PRO 1 adapter plate devices by means of the basic adapter. The support arm head is connected directly to the adapter plate. Mounting hardware More information Additional information is available on the Internet at: www.siemens.com/ip65-hmi-devices Note: Do you require a specific modification or extension to the products described here? Under "Customized products", you can find information about additional and generally available products for the sector, and about the possibilities for customized modification and adaptation. Siemens ST 80 / ST PC 2011 /17

HMI devices for special requirements Accessories for fully enclosed HMI devices Extension units Siemens AG 2011 Overview Extension units With the extension units, the range of possible on-site operations can be extended. They are mounted on the SIMATIC HMI PRO device and can be equipped individually, e.g. with SB elements, emergency stop buttons, key switches, RFID reader, etc. They can be mounted on the left or right side of the PRO device, as required Direct installation of up to 2 Key Panels KP8 / KP8F IP65 - cable routing Can be equipped individually For all 15"/19" PRO devices The combination of HMI PRO device and KP8 PN offers the following advantages: No control cabinet required Low cabling overhead Optimally coordinated design Integration The extension unit is mounted on the left and/or right side of the SIMATIC PRO device, as required. The cable is routed through the "connecting tube", which connects the extension unit to the basic adapter and thus to the support arm. The new SIMATIC Key Panel facilitates the integration of keys and indicator lights in the extension unit considerably. The operator controls must now no longer be individually wired. Instead, control is performed directly via PROFINET. Each extension unit can accommodate up to two KP8 PN. Of course, you can connect further elements such as emergency stop units and keyoperated switches on the rear side of the Key Panel. More information Additional information is available on the Internet at: www.siemens.com/ip65-hmi-devices Note: Do you require a specific modification or extension to the products described here? Under "Customized products", you can find information about additional and generally available products for the sector, and about the possibilities for customized modification and adaptation. Ordering data Order No. Extension unit 15" A 6AV7 674-0KG00-0AA0 For mounting on all 15" PRO devices Extension unit 15" KP8 A 6AV7 674-0KG01-0AA0 For mounting on all 15" PRO devices for direct installation of up to 2 KP8 / KP8F Extension unit 19" right A 6AV7 674-0KJ00-0AA0 For support arm mounting from top mounting of the extension unit on the right side of the 19" PRO device For support arm mounting from below mounting of the extension unit on the left side of the 19" PRO device Extension unit 19" KP8 right A 6AV7 674-0KJ01-0AA0 For support arm mounting from top mounting of the extension unit on the right side of the 19" PRO device For support arm mounting from below mounting of the extension unit on the left side of the 19" PRO device For direct installation of up to 2 KP8 / KP8F Extension unit 19" left A 6AV7 674-0KH00-0AA0 For support arm mounting from top mounting of the extension unit on the left side of the 19" PRO device For support arm mounting from below mounting of the extension unit on the right side of the 19" PRO device Extension unit 19" KP8 left A 6AV7 674-0KH01-0AA0 For support arm mounting from top mounting of the extension unit on the left side of the 19" PRO device For support arm mounting from below mounting of the extension unit on the right side of the 19" PRO device For direct installation of up to 2 KP8 / KP8 F KP8 front plate for the A 6AV7 674-0KH0-0AB0 extension unit For installing up to two KP8 in an extension unit Suits all extension units 15 and 19 Spare front plate for the A 6AV7 674-0KH0-0AA0 extension unit Suits all extension units 15 and 19 Required if the front plate supplied with the extension unit must be replaced A: Subject to export regulations: AL: N and ECCN: EAR99H Scope of delivery: 1 extension unit box 1 front plate for the extension unit 1 connecting tube Mounting accessories /18 Siemens ST 80 / ST PC 2011

HMI devices for special requirements Accessories for fully enclosed HMI devices IP65 keyboards Overview IP65 keyboards The range of possible on-site operations can be extended with the stainless steel IP65 keyboards. They are mounted on the SIMATIC HMI PRO device underneath the base adapter, and they are available in two versions. Anti-twist and non-removable stainless steel key caps Abrasion-resistant laser labeling (depth engraving with annealing marking) Secure, pleasant key feel Maximum user-friendliness thanks to withdrawable longstroke key Windows layout (EN/US) with two additional keys (left and right mouse key function) via cursor block USB interface Angle-adjustable connection for optimal ergonomics Water and dust protection in accordance with degree of protection IP65 For all 15"/19" PRO devices Integration The stainless steel IP65 keyboard is mounted on the SIMATIC PRO device under the base adapter. The cable is run via the keyboard adapter in the base adapter. Ordering data Order No. Stainless steel IP65 A 6AV7 674-0NC00-0AA0 keyboard 15" Width: 400 mm (adapted to 15" SIMATIC HMI PRO) Windows layout (EN/US) without NUM block Angle-adjustable adapter Stainless steel IP65 A 6AV7 674-0NE00-0AA0 keyboard 19" Width: 48 mm (adapted to 19" SIMATIC HMI PRO) Windows layout (EN/US) with NUM block Angle-adjustable adapter A: Subject to export regulations: AL: N and ECCN: EAR99H Scope of delivery: 1 stainless steel IP65 keyboard incl. mounting adapter for PRO devices Mounting accessories More information Additional information is available on the Internet at: www.siemens.com/ip65-hmi-devices Note: Do you require a specific modification or extension to the products described here? Under "Customized products" you can find information about additional and generally available products for the sector, and about the possibilities for customized modification and adaptation. Siemens ST 80 / ST PC 2011 /19

HMI devices for special requirements Accessories for fully enclosed HMI devices Single-port USB interface Siemens AG 2011 Overview The USB interface is used for connecting external I/O devices to the MP 77 PRO, the Thin Client PRO, the Flat Panels PRO, and the HMI IPC477C PRO. USB I/O can thus be connected and operated without opening the device Extension of the internal USB interface externally Design The installation of the USB interface is especially practical if external input devices or mass storage devices frequently have to be connected to the SIMATIC HMI PRO device. The USB interface can optionally be mounted at the top or bottom of the device. Use of the USB interface increases the availability of the system to be operated. The backplane of the SIMATIC HMI PRO device no longer has to be opened in order to connect IO devices. The device can thus be operated without interruption. The USB interface offers the following advantages: Accessible without tools For retrofitting in enclosure Can be mounted either above or below IP65 protection if protective cover is closed Undetachable protective cover Ordering data Order No. 1-port USB interface A 6AV7 674-0LX00-0AA0 A: Subject to export regulations: AL: N and ECCN: EAR99H More information Additional information is available on the Internet at: www.siemens.com/ip65-hmi-devices Note: Do you require a specific modification or extension to the products described here? Under "Customized products", you can find information about additional and generally available products for the sector, and about the possibilities for customized modification and adaptation. Integration The USB interface is suitable, for example, for the connection of: Mouse Keyboard Suitable for SIMATIC MP 77 PRO, SIMATIC Thin Client PRO, SIMATIC Flat Panel PRO, and the HMI IPC477C PRO. /20 Siemens ST 80 / ST PC 2011

HMI devices for special requirements Introduction Overview For special requirements, the following HMI devices with stainless steel front (EN 1672-2), e. g. for use in the food, beverages and tobacco industries, are offered. SIMATIC TP 177B INOX Touch Panel with stainless steel front (EN 1672-2) for the additionally higher requirements from the food and beverages sector, for example. Comprehensive functionality for operator control and monitoring of machines and plants Pixel graphics display with analog touch screen 5.7" STN Color All interfaces for communication with Siemens SIMATIC S7 (e. g. MPI, PROFIBUS DP) are on board PROFINET interface already on board in color version Drivers are also available for non-siemens PLCs Data in the message buffer is retained even if panel is switched off, without battery SIMATIC MP 277 INOX Like operator panels, Multi Panels (MP) are used for local machine operation and monitoring. Data in the message buffer is retained even if panel is switched off, without battery PLC functionality can be integrated directly into the MP 277 platform with Option Their functionality can be expanded by installing additional Windows CE applications (Multi Panel and Panel options) SIMATIC MP 277 devices on the basis of Windows CE combine the rugged construction of Operator Panels with the flexibility of PCs Pixel graphics 10.4" TFT display, color (64k colors) Touch screen (analog/resistive) All interfaces, e. g. MPI, PROFIBUS DP, USB, PROFINET (Ethernet TCP/IP), are on-board SIMATIC MP 77 INOX Like operator panels, Multi Panels (MP) are used for local machine operation and monitoring. Their functionality can be expanded by installing additional Windows CE applications (Multi Panel and Panel options) SIMATIC MP 77 INOX devices on the basis of Windows CE combine the rugged construction of Operator Panels with the flexibility of PCs PLC functionality can be integrated directly into the MP 77 platform with Option Pixel graphics 15" TFT display, color (64k colors) Touch screen (analog/resistive) All interfaces, e. g. MPI, PROFIBUS DP, USB, PROFINET (Ethernet TCP/IP), are on-board SIMATIC Panel PC 677B INOX PC platform with high degree of industrial compatibility for demanding tasks in the area of PC-based automation. Rugged construction: The PC is resistant to the harshest mechanical stress and is reliable in operation. Compact design High degree of investment protection Fast integration capability 15" TFT Touch, stainless steel/inox The operator control unit and computing unit can be placed 0 m apart (optional) SIMATIC HMI IPC677C INOX PC platform with high degree of industrial compatibility for demanding tasks in the area of PC-based automation. Rugged construction: The PC is resistant to the harshest mechanical stress and is reliable in operation. Compact design High degree of investment protection Fast integration capability 15" TFT Touch, stainless steel/inox All interfaces such as PROFIBUS or PROFINET onboard Siemens ST 80 / ST PC 2011 /21

HMI devices for special requirements SIMATIC TP 177B INOX Siemens AG 2011 Overview Touch Panel with stainless steel front (EN 1672-2) for additional increased requirements, e. g. in the food and beverages industry Comprehensive functionality for operator control and monitoring of machines and plants Pixel graphics display with analog touch screen - 5.7" STN Color All interfaces for communication with Siemens SIMATIC S7 (e. g. MPI, PROFIBUS DP) are on board PROFINET interface already on board in color version Drivers for controls from other manufacturers are also available Data in the message buffer is retained even if panel is switched off, without battery Benefits Reduction of service and commissioning costs due to: - Backup/restore via a process interface or optionally via a Multi Media Card - Download of the image and configuration across all device interfaces - Maintenance-free design and long service life of backlit display Data in the message buffer is retained even if panel is switched off, without battery. Can be used worldwide: - 2 online languages (incl. Asian and Cyrillic character sets) can be configured - Online languages can be selected direct on the device Graphic library with preconfigured screen objects Standard interfaces for increasing flexibility: - ext. Multi Media Card, can be used for recipe data records and backing up of configuration/system data; Integrated USB interface for connecting standard printers, for example Simple engineering supported by detailed documentation on the SIMATIC HMI Manual Collection DVD Integrated component of Totally Integrated Automation (TIA): Increase of productivity, minimization of engineering overhead, reduction of lifecycle costs Due to the stainless steel front of the panel, it can also be optimally used in the food and beverages and pharmaceutical sectors. Its front is designed such that it can be cleaned and disinfected easily. Furthermore, liquids flow off automatically from the front. In addition, the stainless steel front (incl. seal) provides protection against contamination with foodstuff. Application Thanks to their practical functions and large user memory, TP 177B INOX Touch Panels can be used wherever operator control and monitoring of machines and plants is necessary on site whether in production automation, process automation, or building-services automation. The TP 177B INOX has a 5.7" STN display with 256 colors and features an integrated PROFINET I/O interface. A USB interface is standard. A further highlight is the non-volatile message buffer included as standard that stores messages permanently without battery backup. The TP 177B INOX has been designed for all industries that require a stainless steel front. The front can be disinfected and does not affect the quality e. g. of foods (assuming regular cleaning). Cleaning can be carried out using pressurized water with a jet of 100 l/min at 1 bar from a distance of 2.5 to m. Liquids flow off automatically from the front. Design Display - 5.7" STN display with 256 colors LED or CCFL 1) backlighting with long service life Analog resistive touch screen Numeric and alphanumeric on-screen keyboard High performance due to RISC processor and 2 MB user memory, plus additional integrated recipe memory Data in the message buffer is retained even if panel is switched off, without battery Interfaces MPI, PROFIBUS DP (up to 12 MBaud) and USB 1.1 (max. 100 ma) on board PROFINET interface Configuration SIMATIC WinCC flexible 2005 Compact or higher Complete functionality for complex tasks Comprehensive Reichert graphic library Multi Media Card slot, can be used for standard Multi Media Cards (for backup/restore and for backup of recipe data records of the configuration as well as of the system data) SINUMERIK, Sm@rtAccess und Sm@rtService options can be used Service-friendly due to maintenance free design and long service life of the backlit display 1) Cold Cathode Fluorescence Lamps /22 Siemens ST 80 / ST PC 2011

HMI devices for special requirements SIMATIC TP 177B INOX Function Permanent window and templates concept for creating screen models Input/output fields for visualizing and editing process parameters Configurable buttons with up to 16 functions simultaneously for direct triggering of functions and actions Indicator light for indicating machine and plant states Predefined texts for labeling function keys, mimics, and process values with characters in any size Help texts for mimics, alarms, and variables Vector graphic, graphics can be used as icon instead of text for "labeling" buttons. They can also be created as screen background images. A library with many graphics and diverse objects is available in the configuration tool. All editors with "OLE" interface can be used as graphic editor, e. g. Paint-Shop, Designer, Corel Draw, etc. Trend functions and bar graphs are used for the graphic display of dynamic values Dynamic positioning of objects and dynamic showing/hiding of objects Computing functions, limit monitoring for reliable process control at inputs and outputs Online language switching with 16 selectable languages, incl. Asian and Cyrillic languages, also for language-dependent graphics Scheduler for cyclic function processing Password protection (security) user administration log on through user ID and password, in addition user group-specific rights as integral part of SIMATIC Signaling system Freely-definable message classes (acknowledgment response and display can be configured). Administration of status messages, fault messages, and system alarms. The alarm history is retained even when device is switched off. Analog alarms (limit alarms) in addition to discrete alarms. Recipe management: with additional data storage (on ext. memory medium) Online/offline processing on the panel Storage of recipe data in standard Windows format (CSV) External processing using standard tools such as Excel, Access is possible Multi Media Card slot for external standard data carriers, can be used for backup/ restore or for transporting recipe data records; Facilitates service and configuration due to: - Backup and restoring of configuration, operating system, data records, and firmware on a PC using ProSave - Possible download/upload of configuration via all device interfaces (with automatic transfer detection) - Individual contrast setting and calibration - Simulation of the configuration direct on the configuring PC Configuration Configuration is implemented using the innovative engineering tool SIMATIC WinCC flexible 2005, Compact Edition or higher. SIMATIC WinCC flexible is the consistent further development of the tried and tested ProTool family. Projects created using ProTool can be easily migrated to WinCC. When implementing OP17 projects, the project engineer must implement corresponding adaptations after the conversion due to the innovated display technology. However, WinCC flexible provides support for this! If WinCC flexible is started direct from SIMATIC Manager, the data in Step 7 can be accessed directly when configuring the panel. Double data entries and data storage is thus avoided. Additional options SINUMERIK Optionally with "Sinumerik HMI copy license WinCC flexible CE". The "SINUMERIK HMI engineering package WinCC flexible" is additionally required for configuration. For further information, see Catalog NC 60. Sm@rtService Remote control and monitoring of SIMATIC HMI systems based on TCP/IP networks Sm@rtAccess Communication between HMI systems based on TCP/IP networks. Remote access to recipe data records, passwords, HMI system-specific information, and much more. Siemens ST 80 / ST PC 2011 /2

HMI devices for special requirements SIMATIC TP 177B INOX Siemens AG 2011 Technical specifications 6AV6 642-8BA10-0AA0 Product type designation TP 177B color INOX (with stainless steel front) Display Size 5.7" (120 mm x 90 mm) Display type STN, 256 Farben Resolution (pixels) Resolution (WxH in pixel) 20 x 240 Backlighting MTBF backlighting (at 25 C) about 50,000 hours Control elements Control elements Touch screen Connection for mouse/keyboard/ USB / USB / USB barcode reader Keyboard Numeric/alphabetical input / Touch operation Touch screen analog, resistive Supply voltage Input voltage permissible range +18 V to +0 V DC Supply voltage 24 V DC Input current Rated current 0.24 A Processor Processor ARM, 200 MHz Memory Type Flash / RAM Usable memory for user data 2048 KB usable memory for user data Time of day Clock Type Hardware clock, synchronizable, no battery backup Interfaces USB port 1 x USB PC card slot No CF card slot No Multi Media Card slot 1 x Multi Media Card slot Industrial Ethernet Industrial Ethernet interface 1 x Ethernet (RJ45) Protocols Protocols (terminal link) Sm@rtAccess Ambient conditions Operating temperature Operation (vertical installation) 0 C to +50 C Operation (max. tilt angle) 0 C to +40 C Storage/transport temperature Transport, storage -20 C to +60 C Relative humidity max. relative humidity 90 % Mounting position vertical maximum permissible angle of inclination without external ventilation +/- 5 Degree and class of protection Front IP66K, NEMA 4, NEMA 4x, NEMA 12 (when installed) Rear IP20 Product type designation Standards, approvals, certificates Certifications Operating systems Operating system Configuration Configuration software Configuration tool Functionality under WinCC flexible Applications/options Task planner Help system Status/control With alarm logging system (incl. buffer and acknowledgment) Number of messages 2000 Bit messages Analog messages Message buffer 6AV6 642-8BA10-0AA0 TP 177B color INOX (with stainless steel front) CE, GL, ABS, BV, DNV, LRS, PRS, FM Class I Div. 2, UL, CSA, culus, EX-Zone 2/22, Gost-R, C-TICK, NEMA 4, NEMA 4x, NEMA 12 Windows CE see "Configuration overview" from page 2/ see chapter 4: HMI software/ SIMATIC WinCC flexible options and SIMATIC WinCC (TIA portal) options. with SIMATIC S7 Ring buffer (n x 256 entries), retentive, maintenance-free Recipes Recipes 100 Data records per recipe 200 Entries per data record 200 Recipe memory 2 KB integrated Flash, expandable Number of process images Process images 500 Variables 1000 Limit values Multiplexing Image elements Text objects 2,500 text elements Graphics object Bit maps, icons, icon (full-screen), vector graphics dynamic objects Diagrams, bar graphs, sliders, analog display, invisible buttons Lists Text lists 00 Graphics list 100 Libraries Security Number of user groups 50 Passwords exportable Number of user rights 2 Data carrier support PC card No CF card No Multimedia Card Recording Recording/Printing Alarms, report (shift report), color print, hardcopy Printer driver ESC/P2, PCL/PCL6 Fonts Keyboard fonts US American (English) /24 Siemens ST 80 / ST PC 2011