High Quality Made in Germany

High Quality Made in Germany

10 CES mortise locks Narrow frame n heavy duty version lockcase galvanized, above and below closed n with special two-turndead-bolt n without striking plate n reversible n less 30 mm backset: one-turn bolt space 15 mm n 30, 35, 40 45 mm backset: special two-turn bolt space 25 mm n distance: 92 mm follower: 8 mm forend: galvanized, silver lacquered; stainless steel; plastic coated latch bolt: steel nickel plated dead bolt: steel nickel plated CES mortise lock 5434 CES mortise lock 5630 25, 30, 35, 40, 45 mm backset forend 24 x 255 mm edged with transmission bar prepared for profile cylinders 30, 35, 40, 45 mm backset forend 24 x 255 mm edged prepared for profile cylinders with roller bolt

11 CES mortise lock 5530 25, 30, 35, 40, 45 mm backset forend 24 x 160 mm edged prepared for profile cylinders only dead bolt CES mortise lock 5834 medium version 20, 25, 30, 35, 40, 45 mm backset forend 24 x 245 mm edged with transmission bar prepared for profile cylinders only one turn bolt space 15 mm

Industrial building mortise lock series 3.. DIN 18251-1 class 3 Available types of lock operation Features 8 mm FIX clamp follower Medium duty version Steel latch bolt and steel dead bolt Tender specifications Industrial building mortise lock according to DIN 18251-1 class 3, medium duty design, closed galvanized lock case, 8 mm cast steel FIX clamp follower, all internal parts protected against corrosion, hardened counterspring, steel latch bolt and steel dead bolt 310 Single tumbler lock, without latch lever, 72 mm centre distance, with 1 nickel-plated lever key no. 0905 334 Prepared for profile cylinders, with latch lever, 72 mm centre distance 390 For toilet/bathroom doors, 78 mm centre distance, 8 mm escutcheon follower Subject to errors and technical alterations.

Industrial building mortise lock series 3.. DIN 18251-1 class 3 Lock designs Lock operation Lever key (BB) Profile cylinder with Bathroom set latch lever (PZW) Part no. 310 334 390 Centre distance 72 72 78 Turn 2 turn 2 turn 1 turn es 55 / 60 / 65 / 70 / 80 mm other backsets upon request Forend Lacquered, nickel-silver Stainless steel, satin Brass, polished colour Latch bolt / dead bolt Nickel-plated Nickel-plated Nickel-plated Forend width Rebated door Flush door Shape 18 / 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0400 Angular striking plate Flush door 0522 Flat striking plate Options Latch-bolt damping, Delrin roller latch (FD) Sound damping (GD) Crank latch, with Delrin crank (KF) Forend extension (dimension X) Inclined forend High dead bolt Latch snib (FF) KABA perforation with 74 mm centre distance Bushed follower Latch bolt only Dead bolt only Bathroom set Rebated door Flush door CESlocks

Mortise latch lock series 3.. DIN 18251 class 3 Available types of lock operation Features 8 mm cast steel follower Medium duty version Cast steel latch bolt Tender specifications Mortise latch lock, medium duty version, values and fitting dimensions according to German standard DIN 18251 class 3, 8 mm cast steel follower, hardened counterspring, all internal parts protected against corrosion, cast steel latch bolt 300-01 Door handle operation only 334-01 Prepared for profile cylinders, with latch lever, 72 mm centre distance Subject to errors and technical alterations.

Mortise latch lock series 3.. DIN 18251 class 3 Lock designs Lock operation Handle Profile cylinder with latch lever (PZW) Part no. 300-01 334-01 Centre distance 72 es 55 / 60 / 65 / 70 / 80 mm, other backsets upon request Forend Lacquered, brass colour Stainless steel, satin Brass, polished Latch bolt / dead bolt Electrogalvanized Polished nickel-plated Polished nickel-plated Options All-brass design (GM) (55-65 mm backset) Forend extension (dimension X) Latch snib (FF) 9 mm follower Forend width Rebated door Flush door Shape 18 / 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0445 Angular striking plate Flush door 0504 Flat striking plate Rebated door Flush door CESlocks

Mortise latch lock series 25.. with small lock case Features Cast steel follower Steel latch bolt Tender specifications 2500 Mortise latch lock for residential applications, with small lock case, lock case and cover galvanized, 8 mm cast steel follower, all internal parts electroplated, hardened counterspring, steel latch bolt Subject to errors and technical alterations.

Mortise latch lock series 25.. with small lock case Lock design Lock operation Door handle Part no. 2500 es 55 / 60 / 65 / 70 / 80 mm, other backsets upon request Forend Lacquered, nickel-silver Stainless steel, satin Brass, polished colour Latch bolt Nickel-plated Nickel-plated Nickel-plated Options Latch-bolt damping, Delrin roller latch (FD) Crank latch, with Delrin crank (KF) Latch snib (FF) FIX clamp follower 9 mm follower Forend width Rebated door Flush door Shape 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0445 Angular striking plate Flush door 0504 Flat striking plate Rebated door Flush door CESlocks

Special mortise lock series 35.. with lockable latch bolt Available types of lock operation Features Cast steel latch bolt Tender specifications Mortise lock for residential applications, with lockable latch bolt, lock case and cover lacquered with hammer-finish paint, all internal parts protected against corrosion, 8 mm cast steel follower, hardened counterspring, cast steel latch bolt, internal case width 10 mm, 55 mm backset 3534 Prepared for profile cylinders, with latch lever, 72 mm centre distance 3590 For toilet/bathroom use, 78 mm centre distance, 8 mm Delrin escutcheon follower Subject to errors and technical alterations.

Special mortise lock series 35.. with lockable latch bolt Lock designs Lock operation Profile cylinder with Bathroom set latch lever (PZW) Part no. 3534 3590 Centre distance 72 78 Options All-metal design (GM) 55 mm only es Forend Latch bolt / dead bolt Stainless steel, satin Polished nickel-plated Forend width Rebated door Flush door Shape 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0445 Angular striking plate Flush door 0504 Flat striking plate Bathroom set Rebated door Flush door CESlocks

Mortise dead lock series 3.. DIN 18251 class 3 Available types of lock operation Features Medium duty version Metal dead bolt with steel core Tender specifications Mortise dead lock, medium duty version, values and fitting dimensions according to German standard DIN 18251 class 3, closed galvanized lock case, all internal parts protected against corrosion, two-turn metal dead bolt with steel core. 310-02 Single tumbler lock, with 1 nickelplated lever key no. 0905 330-02 Prepared for profile cylinders 390-02 For toilet/bathroom doors, 8 mm escutcheon follower Subject to errors and technical alterations.

Mortise dead lock series 3.. DIN 18251 class 3 Lock designs Lock operation Lever key (BB) Profile cylinder (PZ) Bathroom set Part no. 310-02 330-02 390-02 Turn 2 turn 2 turn 1 turn 55 / 60 / 65 / 70 / 80 mm, other backsets upon request es Forend Lacquered, brass colour Stainless steel, satin Brass, polished Latch bolt / dead bolt Electrogalvanized Polished nickel-plated Polished nickel-plated Options All-brass design (GM) (55-65 mm backset) Forend extension (dimension X) KABA perforation Forend width Rebated door Flush door Shape 18 / 20 mm 24 mm Square / rounded Standard striking plates Flush door 0507 Striking plate Flush door 0508 Striking plate Bathroom set Rebated door Flush door CESlocks

Mortise dead lock series 27.. with small lock case Available types of lock operation Features Steel dead bolt Tender specifications Mortise dead lock for residential applications, with small lock case, lock case and cover galvanized, steel dead bolt 2710 Single tumbler lock, with 1 nickelplated lever key no. 0905 2730 Prepared for profile cylinders 2700 For toilet/bathroom doors, 8 mm escutcheon follower Subject to errors and technical alterations.

Mortise dead lock series 27.. with small lock case Lock design Lock operation Lever key (BB) Profile cylinder (PZ) Bathroom set Part no. 2710 2730 2700 Turn 2 turn 2 turn 1 turn 55 / 60 / 65 / 70 / 80 mm es Forend Lacquered, nickel-silver Stainless steel, satin Brass, polished colour Latch bolt Nickel-plated Nickel-plated Nickel-plated Forend width Rebated door Flush door Shape not available 20 / 24 mm Square / rounded Standard striking plates Flush door 0507 Angular striking plate Flush door 0508 Flat striking plate Bathroom set CESlocks

Glass door mortise lock series 40.. with fitting dimensions according to DIN 18251-1 Available types of lock operation Features 8 mm cast steel follower Steel latch bolt and steel dead bolt Tender specifications Glass door mortise lock with fitting dimensions according to German standard DIN 18251-1, galvanized lock case and galvanized internal parts, 8 mm cast steel follower, steel latch bolt, steel dead bolt 4014 Single tumbler lock, with latch lever, 72 mm centre distance, with 1 nickel-plated lever key no. 0905 4034 Prepared for profile cylinders, with latch lever, 72 mm centre distance Subject to errors and technical alterations.

Glass door mortise lock series 40.. with fitting dimensions according to DIN 18251-1 Lock designs Lock operation Lever key with Profile cylinder with latch lever (BBW) latch lever (PZW) Part no. 4014 4034 Centre distance 72 72 Turn 2 turn 2 turn 25 / 30 / 35 / 40 / 45 mm Options Forend extension (dimension X) es Forend Lacquered, nickel-silver Stainless steel, satin Brass, polished colour Latch bolt / dead bolt Nickel-plated Nickel-plated Nickel-plated Forend width Rebated door Flush door Shape 20 mm 24 mm square / rounded Standard striking plates Rebated door 0400 Angular striking plate Flush door 0522 Flat striking plate Rebated door Flush door CESlocks

Swing door mortise lock series 45.. with large lock case Available types of lock operation Features Brass roller Steel latch bolt and steel dead bolt Tender specifications Swing door mortise lock for residential applications, case and cover and all internal parts protected against corrosion, brass roller, roller latch infinitely variable adjustable, cast steel roller latch, steel dead bolt 4530 Prepared for profile cylinders Subject to errors and technical alterations.

Swing door mortise lock series 45.. with large lock case Lock design Lock operation Profile cylinder (PZ) Part no. 4530 Turn es 2 turn 55 / 60 / 65 / 70 / 80 mm, other backsets upon request Forend Lacquered, nickel-silver Stainless steel, satin Brass, polished colour Roller latch / holder Nickel-plated Nickel-plated Nickel-plated Options For toilet/bathroom use with 8 mm escutcheon follower With lever key (BB) insert Forend width Rebated door Flush door Shape not available 20 / 24 mm Square / rounded Standard striking plate Flush door 0510 Striking plate with groove * Adjustable from 4 to 9 CESlocks

Swing door mortise lock series 47.. with small lock case Available types of lock operation Features Brass roller Cast steel roller holder Tender specifications Swing door mortise lock for residential applications, galvanized case and cover, all internal parts protected against corrosion, cast steel roller latch holder, 4700 Roller latch only, 61 mm full width, matching striking plate no. 0511 with groove 4710 Single tumbler lock, with 1 nickelplated lever key no. 0905, lockable roller latch, matching striking plate no. 0511 without groove 4730 Prepared for profile cylinders, lockable roller latch, matching striking plate no 0511 without groove 4790 For toilet/bathroom use, 8 mm escutcheon follower, lockable roller latch, matching striking plate no 0511 without groove Subject to errors and technical alterations.

Swing door mortise lock series 47.. with small lock case Lock design Lock operation None Profile cylinder (PZ) Bathroom set Part no. 4700 4730 4790 Lockable No Yes Yes Turn 1 turn 1 turn 55 mm (locks with locking mechanism) es Forend Lacquered, nickel-silver Stainless steel, satin Brass, polished colour Roller latch / holder Nickel-plated Both nickel-plated Both nickel-plated Forend width Rebated door Flush door Shape not available 24 mm Square / rounded Standard striking plates Flush door 0511 Striking plate with groove Note: For locks with locking mechanism, the striking plate has no groove. adjustable from 4 to 11 Bathroom set CESlocks

Front-door mortise lock series 20.. Available types of lock operation Features 10 mm steel follower Steel latch bolt and steel dead bolt Tender specifications Front-door mortise lock with open, galvanized lock case, 10 mm cast steel follower, hardened counterspring, all internal parts protected against corrosion, steel latch bolt and steel dead bolt 2034 Prepared for profile cylinders, with latch lever, 92 mm centre distance Subject to errors and technical alterations.

Front-door mortise lock series 20.. Lock design Lock operation Profile cylinder with latch lever (PZW) Part no. 2034 Centre distance 92 Turn es 2 turn 55 / 60 / 65 / 70 / 80 mm, other backsets upon request Forend Lacquered, nickel-silver Stainless steel, satin colour Latch bolt / dead bolt Nickel-plated Nickel-plated Forend width Rebated door Flush door Shape 20 / 22 / 24 mm 30 mm Square / rounded Options Latch-bolt damping, Delrin roller latch (FD) Crank latch, with Delrin crank (KF) Forend extension (dimension X) Inclined forend Latch snib (FF) 45 50 mm backset Standard striking plates Rebated door 0422 Angular striking plate Flush door 0502 Flat striking plate Rebated door CESlocks

Industrial building mortise lock series 3.. DIN 18251-1 class 3 Available types of lock operation Features 8 mm FIX clamp follower Medium duty version Steel latch bolt and steel dead bolt Tender specifications Industrial building mortise lock according to DIN 18251-1 class 3, medium duty design, closed galvanized lock case, 8 mm cast steel FIX clamp follower, all internal parts protected against corrosion, hardened counterspring, steel latch bolt and steel dead bolt 310 Single tumbler lock, without latch lever, 72 mm centre distance, with 1 nickel-plated lever key no. 0905 334 Prepared for profile cylinders, with latch lever, 72 mm centre distance 390 For toilet/bathroom doors, 78 mm centre distance, 8 mm escutcheon follower Subject to errors and technical alterations.

Industrial building mortise lock series 3.. DIN 18251-1 class 3 Lock designs Lock operation Lever key (BB) Profile cylinder with Bathroom set latch lever (PZW) Part no. 310 334 390 Centre distance 72 72 78 Turn 2 turn 2 turn 1 turn es 55 / 60 / 65 / 70 / 80 mm other backsets upon request Forend Lacquered, nickel-silver Stainless steel, satin Brass, polished colour Latch bolt / dead bolt Nickel-plated Nickel-plated Nickel-plated Forend width Rebated door Flush door Shape 18 / 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0400 Angular striking plate Flush door 0522 Flat striking plate Options Latch-bolt damping, Delrin roller latch (FD) Sound damping (GD) Crank latch, with Delrin crank (KF) Forend extension (dimension X) Inclined forend High dead bolt Latch snib (FF) KABA perforation with 74 mm centre distance Bushed follower Latch bolt only Dead bolt only Bathroom set Rebated door Flush door CESlocks

Heavy duty mortise lock series 4.. DIN 18251-1 class 4 Available types of lock operation Features (8 + 9 mm) FIX clamp follower High corrosion protection Steel latch bolt and steel dead bolt Steel bushings to protect against chips Tender specifications Heavy duty mortise lock according to DIN 18251-1 class 4, suitable for public buildings, closed galvanized lock case, all internal parts protected against corrosion, hardened counterspring, 8 + 9 mm FIX clamp follower, steel latch bolt and steel dead bolt 410 Single tumbler lock, without latch lever, 72 mm centre distance, with 1 nickel-plated lever key no. 0905 434 Prepared for profile cylinders, with latch lever, 72 mm centre distance 490 For toilet/bathroom doors, 78 mm centre distance, 8 mm escutcheon follower Subject to errors and technical alterations.

Heavy duty mortise lock series 4.. DIN 18251-1 class 4 Lock designs Lock operation Lever key (BB) Profile cylinder with Bathroom set latch lever (PZW) Part no. 410 434 490 Centre distance 72 72 78 Turn 2 turn 2 turn 1 turn es 55 / 60 / 65 / 70 / 80 mm, other backsets upon request Forend Lacquered, nickel-silver Stainless steel, satin Brass, polished colour Latch bolt / dead bolt Nickel-plated Nickel-plated Nickel-plated Forend width Rebated door Flush door Shape 18 / 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0400 Angular striking plate Flush door 0522 Flat striking plate Options Latch-bolt damping, Delrin roller latch (FD) Noise reduction (GD) Crank latch, with Delrin crank (KF) Forend extension (dimension X) Inclined forend High dead bolt Latch snib (FF) KABA perforation with 74 mm centre distance Bushed follower Latch bolt only Dead bolt only Bathroom set Rebated door Flush door CESlocks

Heavy duty mortise lock DIN 18251-1 class 5 Available types of lock operation Features Heavy duty version 8 10 mm FIX clamp follower Follower borne in steel rings Very high corrosion protection Steel latch bolt and steel dead bolt Steel bushings to protect against chips Tender specifications Heavy duty mortise lock according to DIN 18251-1 class 5, suitable for public buildings, heavy duty version, closed galvanized lock case, all internal parts protected against corrosion, heavy duty FIX clamp follower borne in steel rings, steel latch bolt and steel dead bolt 534 Prepared for profile cylinders, with latch lever, 72 mm centre distance Subject to errors and technical alterations.

Heavy duty mortise lock DIN 18251-1 class 5 Lock design Lock operation Profile cylinder with latch lever (PZW) Part no. 534 Centre distance 72 Turn es Forend Latch bolt / dead bolt 2 turn 55 / 60 / 65 / 70 / 80 mm, other backsets upon request Stainless steel, satin Nickel-plated Forend width Rebated door Flush door Shape 18 / 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0400 Angular striking plate Flush door 0522 Flat striking plate Options Latch-bolt damping, Delrin roller latch (FD) Noise reduction (GD) Crank latch, with Delrin crank (KF) Forend extension (dimension X) Inclined forend Latch snib (FF) KABA perforation with 74 mm centre distance Rebated door Flush door CESlocks

Special mortise lock with locking latch bolt series 13.. with fitting dimensions according to DIN 18251 Available types of lock operation Features Cast steel follower Cast steel latch bolt Metal dead bolt with steel core Internal parts protected against corrosion Tender specifications Medium duty mortise lock with locking latch for residential and industrial applications, fitting dimensions according to German standard DIN 18251, closed lock case lacquered with hammer-finish paint, 8 mm follower, hardened counterspring, all internal parts protected against corrosion, cast steel latch bolt, metal dead bolt with steel core 1334 SP Prepared for profile cylinders, with latch lever, 72 mm centre distance, standard follower bearing in lock case and cover 1334-01 SP Latch lock, prepared for profile cylinders, with latch lever, 72 mm centre distance, standard follower bearing in lock case and cover 1734 SP Prepared for profile cylinders, with latch lever, 72 mm centre distance, follower borne in galvanized steel rings 1734-01 SP Latch lock, prepared for profile cylinders, with latch lever, 72 mm centre distance, follower borne in galvanized steel rings Functioning: See part no. 2500 SP Subject to errors and technical alterations.

Special mortise lock with locking latch bolt series 13.. with fitting dimensions according to DIN 18251 Lock design Lock operation Profile cylinder Profile cylinder Profile cylinder Profile cylinder with latch lever with latch lever with latch lever with latch lever (PZW) (PZW) (PZW) (PZW) Part no. 1334 SP 1334-01 SP 1734 SP Centre distance 72 72 72 55 / 60 / 65 / 70 / 80 mm, other backsets upon request es Forend Lacquered Stainless steel, satin Brass, polished Latch bolt / dead bolt Bright nickel-plated Polished nickel-plated Polished nickel-plated Forend width Rebated door Flush door Shape 20 mm 24 mm Square / rounded Standard striking plate Flush door 0525 Flat striking plate Rebated door Flush door CESlocks

Special mortise lock with locking latch bolt series 25.. with small lock case Features Lock case and cover lacquered with hammer-finish paint 8 mm cast steel follower All internal parts electroplated Hardened counterspring Steel latch bolt Locking latch bolt made of die-cast zinc Tender specifications 2500 SP Medium duty mortise lock with locking latch for residential and industrial applications, with small lock case lacquered with hammerfinish paint, 8 mm follower, hardened counterspring, all internal parts electroplated Functioning Below the latch bolt, an additional locking latch is arranged that triggers the blocking mechanism. When the door is closed, both latch bolts hit the striking plate or the steel frame at first. While the main latch bolt engages the striking plate, the locking latch remains in retracted condition. This activates the blocking mechanism, and the main latch bolt can no longer be retracted from the outside. Subject to technical changes

Special mortise lock with locking latch bolt series 25.. with small lock case Lock design Lock operation Part no. Door handle 2500 SP 55 / 60 / 65 / 70 / 80 mm, other backsets upon request es Forend Lacquered Stainless steel, satin Brass, polished Latch bolt / dead bolt Bright nickel-plated Polished nickel-plated Polished nickel-plated Forend width Rebated door Flush door Shape 20 mm 24 mm Square / rounded Standard striking plate Flush door 0526 Flat striking plate Rebated door Flush door CESlocks

Mortise lock with emergency opening and integrated convenience feature Available types of lock operation Features Integrated convenience feature Mechanical latch safeguard Anti-blocking function (9534) High corrosion protection Steel latch bolt and steel dead bolt Options Latch-bolt damping, Delrin roller latch (FD) Crank latch, with Delrin crank (KF) Micro switch for permanent dead bolt interrogation Functional descriptions Convenience feature The integrated convenience feature is identical with the E-type panic latch lever function. The door is fitted with a handle on the inside and with a fixed knob on the outside. The locked door can be opened from the inside with the panic function in the lock. From the outside, the key can be used to unlock the dead bolt and to retract the latch bolt (latch lever function). Subject to errors and technical alterations.

Mortise locks with integrated convenience feature and additional locking latch bolt as latch safeguard Lock design US guidelines Lock operation Profile cylinder Profile cylinder Profile cylinder Profile cylinder with latch lever with latch lever (PZ) with latch lever (PZW) (PZW) (PZW) Part no. 9534 9634-10 9730 9734 Convenience feature Yes Yes Yes Yes Mechanical latch Yes Yes Yes Yes safeguard Anti-blocking function Yes Yes No No Dead bolt 2 turn 1 turn 1 turn 1 turn Required CES cylinder - - 815/41-B5 815/47-B5 55, 60, 65, 70 and 80 mm Latch safeguard (mechanical) Below the latch bolt, the latch safeguard is arranged, an additional locking latch that triggers the blocking mechanism. When the door is closed, both latch bolts hit the striking plate or the steel frame at first. While the main latch bolt engages the striking plate, the locking latch remains in retracted condition. This activates the blocking mechanism, and the main latch bolt can no longer be retracted from the outside Anti-blocking function This function was developed especially for access control situations, where knob cylinders and electronic locking cylinders are used. Thanks to a special design, the connection to the dead bolt mechanism is pulled out of the range of the follower of the cylinder in an emergency. For this reason, the dead bolt cannot be blocked by a cylinder follower standing in the way of the dead bolt throw, and the door can be opened with the door Rebated door Flush door handle. CESlocks

Mortise locks with emergency opening and integrated convenience feature Tender specifications 9534 Industrial building mortise lock with values and fitting dimensions according to DIN 18251-1 class 3, prepared for profile cylinders, with latch lever, 72 mm centre distance, with integrated convenience feature, anti-blocking function of the dead bolt and additional locking latch as mechanical latch safeguard, lock case and internal parts protected against corrosion, steel latch bolt and steel dead bolt with 20 mm throw (2 turn) 9730 Industrial building mortise lock with values and fitting dimensions according to DIN 18251-1 class 3, prepared for CES profile cylinder 815/41-B5 according to US guidelines, without latch lever, 72 mm centre distance, with integrated convenience feature and additional locking latch as mechanical latch safeguard, lock case and internal parts protected against corrosion, steel latch bolt and (one-turn) steel dead bolt with 20 mm throw 9634-10 Industrial building mortise lock with values and fitting dimensions according to DIN 18251-1 class 3, prepared for profile cylinders, with latch lever, 72 mm centre distance, with integrated convenience feature and additional locking latch as mechanical latch safeguard, lock case and internal parts protected against corrosion, steel latch bolt and (one-turn) steel dead bolt with 20 mm throw 9734 Industrial building mortise lock, same as 9730, with additional latch lever. CESlocks

Industrial building mortise lock series 6.. for wet room doors Available types of lock operation Features 8 mm follower High corrosion protection Yellow brass latch bolt Stainless metal dead bolt with brass core Bronze springs Tender specifications Industrial building mortise lock for wet room doors, all-brass version, closed lock case, all internal parts protected against corrosion, bronze counterspring, 8 mm follower, yellow brass latch bolt, stainlessmetal dead bolt with brass core 634 Prepared for profile cylinders, with latch lever, 72 mm centre distance 690 For toilet/bathroom use, 78 mm centre distance, 8 mm escutcheon follower Subject to errors and technical alterations.

Industrial building mortise lock series 6.. for wet room doors Lock design Lock operation Profile cylinder with Bathroom set latch lever (PZW) Part no. 634 690 Centre distance 72 78 Turn 2 turn 1 turn 55 / 60 / 65 / 70 / 80 mm, other backsets upon request es Forend Stainless steel, satin Brass, polished Latch bolt / dead bolt Nickel-plated Nickel-plated Forend width Rebated door Flush door Shape 18 / 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0400 Angular striking plate Flush door 0522 Flat striking plate Bathroom set Rebated door Flush door CESlocks

Special mortise lock series 80.. with three dead bolts Available types of lock operation Features lheavy duty version lhardened counterspring lsteel latch bolt and steel dead bolt Tender specifications 8030 Special mortise lock prepared for profile cylinders, without latch lever, 72 mm and 63 mm centre distance, case and cover lacquered in hammerfinish paint, 8 mm steel follower, hardened counterspring, 8 mm Delrin escutcheon follower for night bolt operation, all internal parts protected against corrosion, internal case width 10 mm, cast steel latch bolt, two-turn steel dead bolt, one-turn night bolt Subject to errors and technical alterations.

Special mortise lock series 80.. with three dead bolts Lock design Lock operation Profile cylinder (PZ) Part no. 8030 Centre distance 72 / 63 55 und 60 mm es Forend Lacquered, brass colour Stainless steel, satin Brass, polished Latch bolt / dead bolt Nickel-plated Nickel-plated Nickel-plated Forend width Rebated door Flush door Shape 20 mm 24 mm Square / rounded Options llatch-bolt damping, Delrin roller latch (FD) lnoise reduction (GD) lcrank latch, with Delrin crank (KF) llatch snib (FF) lstafix clamp follower lemergency function (only if without latch lever) Standard striking plates Rebated door 0433 Angular striking plate Flush door 0518 Flat striking plate Rebated door Flush door CESlocks

Lock with three dead bolts Practical application example The figure below illustrates a possible solution in buildings where one bathroom can be entered from two different rooms, for example in senior citizens' facilities, office buildings etc. In the example, we use a single knob cylinder. Description of the function: When a person uses the bathroom or the toilet, he or she locks the doors with the two thumb turns. Both doors are now locked which is indicated on the room side by the red signal in the toilet door escutcheons. When the user leaves the bathroom or the toilet, the doors are unlocked with the thumb turn. Emergency function: If the user of the bathroom and toilet has not unlocked the o pposite door when leaving the room, the toilet dead bolt of the lock can be retracted by rotating the cylinder knob on the room side so that the bathroom/toilet can be entered again. Note: The door frame must be provided with two holes for the dead bolts. CESlocks

Special mortise lock series 82.. for radiation protective doors, test room doors, etc. Available types of lock operation Features Offset followers and cylinder holes for 40 and 80 mm backset High corrosion protection Angular brass latch bolt One-turn dead bolt Tender specifications 8230 Special mortise lock for radiation protective doors, prepared for profile cylinders, 75 mm centre distance, 8 mm cast steel followers, with offset followers and cylinder holes for 40 and 80 backset, case and cover lacquered in hammer-finish paint, all internal parts protected against corrosion, internal case width 10 mm, hardened door handle spring, triple-guided angular brass latch bolt, one-turn dead bolt Function Dead bolt operation from both sides with key, latch bolt operation from both sides with door handle. Because of the offset backsets, half fittings and single cylinders are used since the required holes in the door leaf are not aligned. Subject to errors and technical alterations.

Special mortise lock series 82.. for radiation protective doors, test room doors, etc. Lock design Lock operation Profile cylinder (PZ) Part no. 8230 Centre distance 75 Options Noise reduction (GD) With 1 latch lever at 40 or 80 mm backset 40 / 80 mm es Forend Latch bolt / dead bolt Stainless steel, satin Brass, nickel-plated Forend width Rebated door Flush door Shape 20 mm 24 mm Square / rounded Standard striking plates Rebated door 0400 Angular striking plate Flush door 0522 Flat striking plate Rebated door Flush door CESlocks

Sliding door mortise lock series 90.. with upward shoot bolt throw Available types of lock operation Features Fully electroplated M10 shoot bolt receiver Shoot bolt guide behind forend or at backset 15 mm shoot bolt throw Tender specifications Special sliding door mortise lock for operating theatre rooms, upward shoot bolt throw, with M10 stud bolt to receive the shoot bolt, all parts fully electroplated, 15 mm throw 9003 Prepared for profile cylinders, shoot bolt guide directly behind the forend, only available with 45 mm backset 9004 Prepared for profile cylinders, shoot bolt guide at backset Accessories Round bolt, electroplated, covering rail or guide plate Subject to errors and technical alterations.

Sliding-door mortise lock series 90.. with upward shoot bolt throw Lock design Lock operation Profile cylinder Profile cylinder Bathroom set Bathroom set (PZ) (PZ) Part no. 9003 9004 9005 9006 45 only 45-100 45 only 45-100 Shoot bolt guide Behind forend At forend Behind forend At forend Options M8 stud bolt es Forend Electroplated Stainless steel, satin Forend width Rebated door Flush door Shape not available 15 / 24 mm Square Note: When ordering covering rails, the door height must be stated. Striking plate Type 9003 Accessories Covering rail CESlocks

Bolt guidance for sliding door locks 9003 / 9004 As an alternative to the covering rail, a guide plate may be used which is recessed at the upper edge of the door leaf. CESlocks

Mortise lock for fire-rated doors single wing Available types of lock operation Features 9 mm follower High corrosion protection Cast steel latch bolt Steel dead bolt, two-turn Tender specifications 9234 Mortise door according to DIN 18250 for wooden and steel doors and fire-rated doors, closed galvanized lock case, all internal parts protected against corrosion, prepared for profile cylinders, with latch lever, 72 mm centre distance, 9 mm one-piece steel follower, hardened counterspring, cast steel latch bolt, two-turn (22 mm) steel dead bolt Subject to errors and technical alterations.

Mortise lock according to DIN 18250 classes 4 and 5 for single wing fire-rated doors (T30-T90) Lock design Lock operation Profile cylinder with latch lever (PZW) Part no. 9234 Follower 9 mm Dead bolt 2 turn 55 and 65 mm, other backsets upon request es Class 4 Class 5 Forend Galvanized Stainless steel, satin Latch bolt / dead bolt Galvanized Nickel-plated Forend width Rebated door Flush door Shape 20 mm 24 mm Rounded Rebated door Flush door CESlocks

Mortise lock for fire-rated doors single wing with panic function Available types of lock operation Features 9 mm steel follower High corrosion protection Cast steel latch bolt Steel dead bolt, two-turn Tender specifications 9334 Panic mortise lock according to DIN 18250 for fire-rated doors, with panic latch lever function E (door handle inside, knob outside), closed galvanized lock case, all internal parts protected against corrosion, prepared for profile cylinders, with latch lever, 72 mm centre distance, 9 mm one-piece steel follower, hardened counterspring, cast steel latch bolt, two-turn (22 mm) steel dead bolt 9834 Panic mortise lock, same as 9334, for fitting of knob cylinders Subject to errors and technical alterations.

Mortise lock according to DIN EN 179 or 1125 for single wing fire-rated doors (T30-T90) Lock designs Lock operation Profile cylinder with Profile cylinder (PZ) Profile cylinder (PZ) latch lever (PZW) Part no. 9334 9330 D 9330 B Follower One-piece Split Split Panic function E D B Dead bolt 2 turn 2 turn 1 turn es Forend Latch bolt / dead bolt Stainless steel, satin Nickel-plated 65 mm, other backsets upon request Forend width Rebated door Flush door Shape 20 mm 24 mm Rounded Tender specifications 9330 D Panic mortise lock according to DIN 18250 for fire-rated doors, with panic transit function D (door handle inside, door handle outside), closed galvanized lock case, all internal parts protected against corrosion, prepared for profile cylinders, without latch lever, 72 mm centre distance, 9 mm split steel follower, hardened counterspring, cast steel latch bolt, two-turn (22 mm) steel dead bolt 9330 B Panic mortise lock according to DIN 18250 for fire-rated doors, with panic change-over function B (door handle inside, door handle outside), closed galvanized lock case, all internal parts protected against corrosion, prepared for profile cylinders, without latch lever, 72 mm centre distance, 9 mm split steel follower, hardened counterspring, cast steel latch bolt, one-turn (11 mm) steel dead bolt 9830 D Panic mortise lock, same as 9330 D, for fitting of knob cylinders Rebated door Flush door CESlocks

Mortise lock for fire-rated doors double wing with panic function Available types of lock operation Tender specifications Lock combinations with full panic function for double wing doors, automatic locking of the inactive door leaf 9401 Inactive door leaf The inactive door leaf and the active door leaf can be unlocked simultaneously via the inactive door leaf. The shoot bolts are automatically arrested by the switching lock. Locking is automatic by means of the switching lock. Active door leaf Inside: From the inside, the active door leaf can be locked and unlocked with the key. When the dead bolt is in locked position, the dead bolt can be retracted simultaneously with the latch bolt by operation of the door handle. Outside: On the outside of the active door leaf, a fixed knob is fitted. From Switching lock Upper shoot bolt Panic espagnolette lock Shoot bolt striking plate Fire resistant panic lock Components of the lock combinations no. 9401 and 9402 Panic espagnolette lock no. 9400 Switching lock no. 0705, galvanized Shoot bolt striking plate no. 0720, galvanized Shoot bolt guide plate no. 0721, galvanized Bottom keep no. 0730 Upper shoot bolt no. 0710, galvanized the outside, the active door leaf can be locked and unlocked with the key. In unlocked condition, the latch can be retracted with the key via the latch Lower shoot bolt Inactive door leaf Active door leaf Lower shoot bolt no. 0711, galvanized Fire resistant panic lock no. 9343 for 9401 and no. 9430 B for no. 9402 lever. Shoot bolt guide plate Floor striker groove Subject to errors and technical alterations.

Lock combinations according to DIN EN 179 or 1125 full panic function for double wing fire-rated doors (T30-T90) Lock design Panic function E B Part no. 9401 9402 Espagnolette lock 9400 9400 Panic lock 9434 9430 B 65 mm es Forend Stainless steel, satin Latch bolt / dead bolt Nickel-plated Forend width Rebated door Flush door Shape 20 mm 24 mm Rounded Rebated door Flush door Tender specifications 9402 Inactive door leaf The inactive door leaf and the active door leaf can be unlocked simultaneously via the inactive door leaf. The shoot bolts are automatically arrested by the switching lock. Locking is automatic by means of the switching lock. Active door leaf Inside: From the inside, the active door leaf can be locked and unlocked with the key. When the dead bolt is in locked position, the dead bolt can be retracted simultaneously with the latch bolt by operation of the door handle. The dead bolt is at this stage flush with the forend and the active door leaf is opened. The door handle on the outside is switched to idle. Outside: On the outside of the active door leaf, a door handle is fitted. From the outside, the active door leaf can be locked and unlocked with the key. When the dead bolt is in locked position or one-turn retracted (flush) position, the outside handle is idle. When the dead bolt is retracted by two turns, the latch bolt can be operated with the door handle. In this condition, the door may be passed through from the outside. CESlocks

Narrow stile mortise lock for single wing framed doors with panic function Available types of lock operation Features 9 mm follower High protection against corrosion Reversible latch Tender specifications 7434 Mortise lock with panic function according to DIN 18251-2, class 1, for single wing framed doors, with panic latch lever function E (door handle inside, knob outside), closed lock case protected against corrosion, prepared for profile cylinders, with latch lever, 92 mm centre distance, 9 mm one-piece follower, one-turn dead bolt (15 mm) 7430 B Mortise lock with panic function according to DIN 18251-2, class 1, for single wing framed doors, with panic change-over function B (door handle inside, door handle outside), closed lock case protected against corrosion, prepared for profile cylinders, without latch lever, 92 mm centre distance, 9 mm onepiece follower, one-turn dead bolt (15 mm) Subject to errors and technical alterations.

Narrow stile panic mortise lock according to DIN EN 179 or 1125 for single wing framed doors Lock design Lock operation Profile cylinder with Profile cylinder (PZ) latch lever (PZW) Part no. 7434 7430 B Follower one-piece split Panic function E B 30, 35 and 40 mm, other backsets upon request es Forend Stainless steel, satin Latch bolt / dead bolt Polished nickel-plated Forend width Rebated door Flush door Shape not available 24 mm Square CESlocks

Narrow stile mortise lock for double wing framed doors with panic function Available types of lock operation Tender specifications Lock combinations with full panic function for double wing framed doors, automatic locking of the inactive door leaf 7501 Inactive door leaf The inactive door leaf and the active door leaf can be unlocked simultaneously via the inactive door leaf. The shoot bolts are automatically arrested by the switching lock. Locking is automatic by means of the switching lock. Active door leaf Inside: From the inside, the active door leaf can be locked and unlocked with the key. When the dead bolt is in locked position, the dead bolt can be retracted simultaneously with the latch bolt by operation of the door handle. Outside: On the outside of the Switching lock Upper shoot bolt Panic espagnolette lock Shoot bolt striking plate Fire resistant panic lock Components of the lock combinations no. 7501 and 7502 Panic espagnolette lock no. 7500 Switching lock no. 0706, galvanized Shoot bolt striking plate no. 0722, galvanized Shoot bolt guide plate no. 0723, galvanized Bottom keep no. 0731 Upper shoot bolt no. 0712, galvanized active door leaf, a fixed knob is fitted. From the outside, the active door leaf can be locked and unlocked with the key. In unlocked Lower shoot bolt Inactive door leaf Active door leaf Lower shoot bolt no. 0713, galvanized Narrow stile panic lock no. 7534 for 7501 and no. 7530 B for no. 7502 condition, the latch can be retracted with the key via the latch lever. Shoot bolt guide plate Floor striker groove Subject to errors and technical alterations.

Lock combinations according to DIN EN 179 or 1125 full panic function for double wing framed doors Lock designs Lock operation Profile cylinder with Profile cylinder (PZ) latch lever (PZW) Part no. 7501 7502 Espagnolette lock 7500 7500 Panic lock 7534 7530 B es Forend Stainless steel, satin Latch bolt / dead bolt Polished nickel-plated 30, 35 und 40 mm Forend width Rebated door Flush door Shape not available 24 mm Square Tender specifications 7502 Inactive door leaf The inactive door leaf and the active door leaf can be unlocked simultaneously via the inactive door leaf. The shoot bolts are automatically arrested by the switching lock. Locking is automatic by means of the switching lock. Active door leaf Inside: From the inside, the active door leaf can be locked and unlocked with the key. When the dead bolt is in locked position, the dead bolt can be retracted simultaneously with the latch bolt by operation of the door handle. Outside: On the outside of the active door leaf, a fixed knob is fitted. From the outside, the active door leaf can be locked and unlocked with the key. In unlocked condition, the latch can be retracted with the key via the latch lever. CESlocks

Softline key section SP Patent protected key section for industrial buildings CEScylinder Schließe

Softline key section SP SP is a patent protected conventional key section series for industrial building applications. It has 5 or 6 nickel silver pin tumblers on each locking side. At least one housing pin and one core pin per cylinder side are made of hardened nickelplated steel. Other features include: Antipicking feature pursuant to DIN 18252 with specially designed housing pins for effective protection against picking tools. Long-term protection against unauthorized key duplication. 3 strong nickel silver keys conforming to DIN standard, with at least 11.5 mm long key shanks, suitable for commercial armatures with cylinder covering. A guiding groove over the entire cylinder core to ensure positive transfer of the key torque and prevent breaking-off of the key.

Softline key section SP Variants 1 Double cylinder no. 810 SP Brass, satin nickel plated Basic length: 27.5/27.5 mm 3 nickel silver keys 1 2 Double cylinder no. 8710 SP Brass, satin nickel plated Basic length: 27.5/27.5 mm Locking on both sides 3 nickel silver keys 2 Single cylinder no. 851 1/2 SP Brass, satin nickel plated Basic length 27.5 mm Follower adjustable in 12 positions 3 nickel silver keys 3 Knob cylinder no. 815 SP Brass, satin nickel plated Basic length 27.5/27.5 mm One side locking, the other side aluminium knob, shape H, F1 3 nickel silver keys 3 4 5 4 Cam cylinder no. 5558/30 SP Brass, polished nickel plated Locking movement 90º Locking direction as desired Fitting dimension 25 mm 2 nickel silver keys 5 Cylinder padlock no. 215 N SP Stainless steel shackle Housing 58 mm wide, 50 mm high Latches without locking Shackle clearance 35 mm (standard) 2 nickel silver keys 6 6 Double cylinder no. 802/5 SP Brass, satin nickel plated Basic length 27.5/27.5 mm One side locking, the other side blind 3 nickel silver keys

Softline key section SP Options and extras 1 Modular SP cylinders are also available in modular design. This means that the length of these cylinders can be adapted to the thickness of the door on site by using appropriate extension parts. 2 Additional antidrilling and antipulling protection For application in particularly security relevant areas, SP cylinders can be equipped with hard-metal pins and plates in the housing and on the cylinder core face. These meet the requirements of the highest VdS classes. 3 Combination with CES electronic s Also CES electronic / motor cylinders can be provided with the protected SP key section and can thus be easily integrated in mechanical SP locking s. 4 Locking management The CESportier vision software makes the PC management of complex locking s simple. The software includes input and query functions for personnel, key, cylinder, locking function, key handout and key return data and fast order handling. 1 2 3 3 C.Ed.Schulte GmbH Zylinderschloßfabrik P.O. Box 101180, D-42547 Velbert, Germany Phone +49 (0) 2051-204-116/188 Fax +49 (0) 2051-204-231 e-mail export@ces-cylinder.de http://www.ces.eu Subject to technical changes without notice SP 04/2008_VKF1020_engl

Conventional key section KM with trademark protection CEScylinder Schließe

Conventional key section KM with trademark protection Locking technology with trademark protection pursuant to DIN 18252/EN 1303 KM is a conventional key section series for industrial buildings with a special feature the KM enjoys trademark protection. The cross section of the key shank has the shape of the registered trademark CES. Unlike a patent, a trademark offers legal protection against unauthorized duplication of the original keys for an unlimited period of time. The KM is also characterized by impeccable locking precision, maximum variability and highly effective security elements. Antidrilling and antipulling protection The KM has 5, 6 or 7 nickel silver pin tumblers on each locking side. At least one housing pin and one core pin per cylinder side are made of hardened nickel-plated steel. Further features include: Antipicking feature pursuant to DIN 18252 with specially designed housing pins for effective protection against picking tools. Strong nickel silver keys conforming to DIN standard, with at least 11.5 mm long key shanks, suitable for commercial armatures with cylinder covering. A guiding groove over the entire cylinder core to ensure positive transfer of the key torque and prevent breaking-off of the key.

Conventional key section KM Variants 1 Double cylinder no. 810 KM 1 2 Brass, satin nickel plated Basic length: 27.5/27.5 mm 3 nickel silver keys Double cylinder no. 8710 KM Brass, satin nickel plated Basic length: 27.5/27.5 mm Locking on both sides 3 nickel silver keys 2 Single cylinder no. 851 1/2 KM Brass, satin nickel plated Basic length 27.5 mm Follower adjustable in 12 positions 3 nickel silver keys 3 Knob cylinder no. 815 KM Brass, satin nickel plated Basic length 27.5/27.5 mm One side locking, the other side aluminium knob, shape H, F1 3 nickel silver keys 4 Cam cylinder no. 5558/30 KM Brass, polished nickel plated Locking movement 90º Locking direction as desired Fitting dimension 25 mm 2 nickel silver keys 5 Padlock no. 215 N KM Stainless steel shackle Housing 58 mm wide, 50 mm high Latches without locking Shackle clearance 35 mm (standard) 2 nickel silver keys 6 Double cylinder no. 802/5 KM Brass, satin nickel plated Basic length 27.5/27.5 mm One side locking, the other side blind 3 nickel silver keys 3 4 6 5

Conventional key section KM Options and extras 1 Modular KM cylinders are also available in modular design. This means that the length of these cylinders can be adapted to the thickness of the door on site by using appropriate extension parts. 2 Additional antidrilling and antipulling protection For application in particularly security relevant areas, KM cylinders can be equipped with hard-metal pins and plates in the housing and on the cylinder core face. These meet the requirements of the highest VdS classes. 1 2 3 3 Combination with CES electronic s Also CES electronic / motor cylinders can be provided with the protected KM key section and can thus be easily integrated in mechanical locking s. 4 Locking management The CESportier vision software makes the PC management of complex locking s simple. The software includes input and query functions for personnel, key, cylinder, locking function, key handout and key return data and fast order handling. C.Ed.Schulte GmbH Zylinderschloßfabrik P.O. Box 10 11 80, D-42547 Velbert, Germany Phone +49 (0) 2051-204-116/188 Fax +49 (0) 2051-204-231 e-mail export@ces-cylinder.de http://www.ces.eu 3 Subject to technical changes without notice KM 04/2008_VKF1014_engl

Cabinet locks Article 3002 Espagnolette lock Function Accessories Order specifications Lock case: steel Nickel-plated For split section rod. For subsequent fitting of cylinder article 222. Including escutcheon. Fitting note: 24mm bore. 40mm Catch hooks, rod guides, striking plate, locking bolt (without rods) Figure shows right-hand lock. Please indicate door direction. Available for: RH, LH, drawer, head position. Article 3012 Rim lock Lock case: steel Nickel-plated Function For subsequent fitting of cylinder article 222. Fitting note: 24mm bore. 40mm Accessories Order specifications Nickel-plated angled striking plate Figure shows right-hand lock. Please indicate door direction. Available for: RH, LH, drawer, head position. 6

Cabinet locks Article 222 Round cylinder Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function For locks article 3002, 3012. Max. door thickness 23mm. Accessories Escutcheon Article 3001 Espagnolette lock Cylinder: brass. Lock case: steel. Cylinder: brass, satin nickel-plated. Lock case: steel, nickel-plated. Pin tumblers 5 Keys in series / locking 2 / 2 Function Including cylinder article 122. Accessories Order specifications 40mm Catch hooks, rod guides, striking plate, locking bolt (without rods) Figure shows right-hand lock. Please indicate door direction and thickness. Available for: RH, LH, drawer, head position. 7

Cabinet locks Article 3011 Rim lock Cylinder: brass. Lock case: steel. Cylinder; brass, satin nickel-plated. Lock case steel, nickel-plated. Pin tumblers 5 Keys in series / locking 2 / 2 Function Including cylinder article 122. Accessories Order specifications 40mm Nickel-plated angled striking plate Figure shows right-hand lock. Please indicate door direction and thickness. Available for: RH, LH, drawer, head position. Article 3003 Espagnolette lock Function Accessories Order specifications Lock case: steel Lock case: steel, nickel-plated For split section rod. For subsequent fitting of olive article 6036, 6037, 6038, cylinder article 328. Including escutcheon. Fitting note: 30mm bore. 40mm Catch hooks, rod guides, striking plate, locking bolt (without rods) Figure shows right-hand lock. Please indicate door direction. Available for: RH, LH, drawer, head position. 8

Cabinet locks Article 3013 Rim lock Lock case: steel Lock case: steel, nickel-plated Function For subsequent fitting of olives article 6036, 6037, 6038, cylinder article 328. Fitting note: 30mm bore. 40mm Accessories Order specifications Nickel-plated angled striking plate Figure shows right-hand lock. Please indicate door direction. Available for: RH, LH, drawer, head position. Article 6036 Olive with cylinder Pin tumblers 5 Keys in series / locking Function Order specifications Cylinder: brass. Housing: Zamak Z 410. Velvet chromium-plated 2 / 2 With rigid dead bolt. For locks part no. 3003, 3013. Door thickness 20mm. Door thickness 25, 30mm upon request. Please indicate door direction and thickness. 9

Cabinet locks Article 6036/31 Olive with cylinder Pin tumblers 5 Keys in series / locking Function Order specifications Cylinder: brass. Housing: Zamak Z 410. Velvet chromium-plated 2 / 2 With spring mounted dead bolt. For locks article 3003, 3013. Please indicate door direction and thickness. Door thickness 20mm. Door thickness 25, 30mm upon request. Article 6036/40 Olive with cylinder Pin tumblers 5 Keys in series / locking Function Order specifications Cylinder: brass. Housing: nylon. HEWI colors 2 / 2 With rigid dead bolt. For locks article 3003, 3013. Door thickness 20mm. Door thickness 25, 30mm upon request. Please indicate door direction and thickness. 10

Cabinet locks Article 6036/41 Olive with cylinder Pin tumblers 5 Keys in series / locking Function Order specifications Cylinder: brass. Housing: nylon. HEWI colors 2 / 2 With spring mounted dead bolt. For locks article 3003, 3013. Door thickness 20mm. Door thickness 25, 30mm upon request. Please indicate door direction and thickness. Article 6038 Olive without cylinder Zamak Z 410 Function Velvet chromium-plated Rotating. For locks article 3003, 3013. Door thickness 20mm. Door thickness 25, 30mm upon request. 11

Cabinet locks Article 6038/40 Olive without cylinder Function Nylon HEWI colors Rotating. For locks article 3003, 3013. Door thickness 20mm. Door thickness 25, 30mm upon request. Article 4900 Espagnolette lock Function Accessories Order specifications Lock case: steel Lock case steel, nickel-plated For right- or left-hand application. For subsequent fitting of olive article 5836, 5837, 5838, 5839. 40mm Catch hooks, rod guides, striking plate, locking bolt (without rods) Figure shows right-hand lock. 12

Cabinet locks Article 4901 Function Accessories Order specifications Rim lock for furniture Lock case: steel Lock case: steel, nickel-plated For right- or left-hand application. For subsequent fitting of olive article 5836, 5837, 5838, 5839. 40mm Nickel-plated angled striking plate Figure shows right-hand lock. Article 5836 Olive with cylinder Pin tumblers 5 Keys in series / locking Function Accessories Order specifications Cylinder: brass. Housing: Zamak Z 410. Velvet chromium-plated 2 / 2 With rigid dead bolt. For locks article 4900, 4901. Door thickness 20mm. Door thickness 25, 30mm upon request. Escutcheon, adapter Please indicate door direction and thickness. 13

Cabinet locks Article 5836/31 Olive with cylinder Pin tumblers 5 Keys in series / locking Function Accessories Order specifications Cylinder: brass. Housing: Zamak Z 410. Velvet chromium-plated 2 / 2 With spring mounted dead bolt. For locks article 4900, 4901. Door thickness 20mm. Door thickness 25, 30mm upon request. Escutcheon, adapter Please indicate door direction and thickness. Article 5836/40 Olive with cylinder Pin tumblers 5 Keys in series / locking Function Accessories Order specifications Cylinder: brass. Housing: nylon. HEWI colors 2 / 2 With rigid dead bolt. For locks article 4900, 4901. Door thickness 20mm. Door thickness 25, 30mm upon request. Escutcheon, adapter Please indicate door direction and thickness. 14

Cabinet locks Article 5836/41 Olive with cylinder Pin tumblers 5 Keys in series / locking Function Accessories Order specifications Cylinder: brass. Housing: nylon. HEWI colors 2 / 2 With spring mounted dead bolt. For locks article 4900, 4901. Door thickness 20mm. Door thickness 25, 30mm upon request. Escutcheon, adapter Please indicate door direction and thickness. Article 5838 Olive without cylinder Zamak Z 410 Function Accessories Velvet chromium-plated Rotating. For locks article 4900, 4901. Door thickness 20mm. Door thickness 25, 30mm upon request. Escutcheon, adapter 15

Cabinet locks Article 5838/40 Olive without cylinder Function Accessories Nylon HEWI colors Rotating. For locks article 4900, 4901. Door thickness 20mm. Door thickness 25, 30mm upon request. Escutcheon, adapter Article 5839 Olive without cylinder Zamak Z 410 Function Accessories Velvet chromium-plated Fixed. Door thickness 20mm. Door thickness 25, 30mm upon request. Escutcheon 16

Cabinet locks Article 5839/40 Function Accessories Olive without cylinder Nylon HEWI colors Fixed. Door thickness 20mm. Door thickness 25, 30mm upon request. Escutcheon Article 4141 Mortise lock for furniture Pin tumblers 5 Keys in series / locking Function Accessories Order specifications Cylinder: brass. Lock case: steel. Cylinder: brass, satin nickel-plated. Lock case: steel, bright. 2 / 2 Length with cylinder 20mm, further lengths upon request. RH, LH, drawer, head position. 25-40mm Escutcheon Figure shows right-hand lock. 17

Cabinet locks Article 4177 Mortise lock for roller shutters Cylinder: brass. Lock case: steel. Cylinder: brass, satin nickel-plated. Lock case: steel, bright. Pin tumblers 5 Keys in series / locking Function Accessories Order specifications 2 / 2 Length with cylinder 20mm, further lengths upon request. RH, LH, drawer, head position. 20-40mm Escutcheon, striking plate. Figure shows right-hand lock. Article 4177/30 Mortise lock for roller shutters Pin tumblers 5 Keys in series / locking Function Accessories Order specifications Cylinder: brass. Lock case: steel. Cylinder: brass, satin nickel-plated. Lock case: steel, bright. 2 / 2 Length with cylinder 20mm, further lengths upon request. RH, LH, drawer, head position. 25mm Escutcheon, striking plate. Figure shows right-hand lock. 18

Cabinet locks Article to 4141, 4177 Round cylinder Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function Spare cylinder for article 4141, 4177. Length 20mm, further lengths upon request. Accessories (without escutcheon) Article 4146 Rim lock for furniture Pin tumblers 5 Keys in series / locking Function Accessories Order specifications Cylinder: brass. Lock case: steel. Cylinder: brass, satin nickel-plated. Lock case: steel, bright. 2 / 2 Length with cylinder 20mm, further lengths upon request. 20-40mm Escutcheon Figure shows right-hand lock. Available for: RH, LH, drawer, head position. 19

Cabinet locks Article 4155 Inlaid lock Cylinder: brass. Lock case: steel. Cylinder: brass, satin nickel-plated. Lock case: steel, nickel-plated. Pin tumblers 5 Keys in series / locking Function Accessories Order specifications 2 / 2 Length with cylinder 20mm, further lengths upon request. 20-40mm Escutcheon Figure shows right-hand lock. Available for: RH, LH, drawer, head position. Article 4158 Inlaid lock Pin tumblers 5 Keys in series / locking Function Accessories Order specifications Cylinder: brass. Lock case: brass. Cylinder: brass, satin nickel-plated. Lock case: brass, ground 2 / 2 Length with cylinder 20mm, further lengths upon request. 25-40mm Escutcheon Figure shows right-hand lock. Available for: RH, LH, drawer, head position. 20

Cabinet locks Article to 4146, 4155 Round cylinder Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function Spare cylinder for article 4146, 4155. Length 20mm, further lengths upon request. Accessories (without escutcheon) Article 41 Round cylinder Pin tumblers 5 Keys in series / locking Function Accessories Brass Brass, satin nickel-plated 2 / 2 Length 20mm, further lengths upon request. (without escutcheon) follower part no. 95004, other follower shapes upon request. 21

Cabinet locks Article 42 Round cylinder Pin tumblers 5 Keys in series / locking Function Accessories Brass Brass, satin nickel-plated 2 / 2 Length 20mm, further lengths upon request. (without escutcheon) Follower part no. 95004, other follower shapes upon request. Article 4166 Inlaid lock Pin tumblers 4 Keys in series / locking Function Accessories Order specifications Cylinder, lock case and dead bolt: brass Brass, satin nickel-plated 2 / 2 Drawer. Length with cylinder 16mm, further lengths upon request. 20mm Escutcheon Figure shows right-hand lock. Available for: RH, LH, drawer fitting. 22

Cabinet locks Article 39 Oval cylinder Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function Spare cylinder for part no. 4166. Length 20mm, further lengths upon request. Accessories (without escutcheon) Follower part no. 95004, other follower shapes upon request. Article to 4134 Espagnolette lock Cylinder: brass. Lock case: steel. Cylinder: brass, satin nickel-plated. Lock case: steel, nickel-plated. Pin tumblers 5 Keys in series / locking Function Accessories Order specifications 2 / 2 Length with cylinder 30mm, further lengths upon request. 30mm Escutcheon, catch hooks, rod guides, striking plate, locking bolt (without rods) Figure shows right-hand lock. Available for: RH, LH fitting 23

Cabinet locks Article 159 Rim lock for furniture Cylinder and lock case: brass Cylinder and Lock case: brass, polished nickel-plated Pin tumblers 5 Keys in series / locking Accessories 2 / 2 Escutcheon Article 180 3/4 Rod lock Pin tumblers 4 Cylinder: brass. Lock case and dead bolt: steel. Cylinder: brass, polished nickel-plated. Lock case and dead bolt: steel, raw. Keys in series / locking 2 / 2 Function Key rotation: 90. Key removable only in locked position. 24

Cabinet locks Article 1180 3/4 Rod lock Cylinder: brass. Lock case and dead bolt: steel. Cylinder: brass, polished nickel-plated. Lock case and dead bolt: steel, raw. Pin tumblers 4 Keys in series / locking 2 / 2 Function Key rotation: 90. Key removable only in locked position. Accessories Weld-on plate Article 1180/30 Rod lock Pin tumblers 5 Cylinder: brass. Lock case and dead bolt: steel. Cylinder: brass, polished nickel-plated. Lock case and dead bolt: steel, raw. Keys in series / locking 2 / 2 Function Key rotation: 360. Key removable in both positions. Accessories Weld-on plate 25

Cabinet locks Article 219 Padlock Pin tumblers 5 Keys in series / locking Brass 2 / 2 26

Cam cylinders Article 5744 Cam cylinder Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 90. Key removable only in locked position. Accessories Escutcheon Order specifications Closing direction as per closing direction table, see p. 52 Article 5744/30 Cam cylinder Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 90. Key removable only in locked position. Accessories Escutcheon Order specifications Closing direction as per closing direction table, see p. 52 42

Cam cylinders Article 5634 Cam cylinder Pin tumblers 4 Brass Brass, polished nickel-plated Keys in series / locking 2 / - Function Key rotation: 90. Key removable only in locked position. Further cams upon request, see p. 50 ff. Order specifications Closing direction as per closing direction table, see p. 52 Article 5634/33 Cam cylinder Pin tumblers 5 Brass Brass, polished nickel-plated Keys in series / locking 2 / - Function Key rotation: 90. Key removable only in locked position. Further cams upon request, see p. 50 ff. Order specifications Closing direction as per closing direction table, see p. 52 43

Cam cylinders Article 5225 Cam cylinder Pin tumblers 5 Brass Brass, polished nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 90. Key removable only in locked position. Further cams upon request, see p. 50 ff. Order specifications Closing direction as per closing direction table, see p. 52 Article 5225 DB Cam cylinder Pin tumblers 5 Brass Brass, polished nickel-plated Keys in series / locking 2 / - Function Key rotation: 90. Key removable in both positions. Further cams upon request, see p. 50 ff. Order specifications Closing direction as per closing direction table, see p. 52 44

Cam cylinders Article 5225/42 Cam cylinder Pin tumblers 5 Brass Brass, polished nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 90. Key removable only in locked position. Further cams upon request, see p. 50 ff. Order specifications Closing direction as per closing direction table, see p. 52 Article 5256 Cam cylinder Pin tumblers 5 Brass Brass, polished nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 90. Key removable only in locked position. Further cams upon request, see p. 50 ff. Order specifications Closing direction as per closing direction table, see p. 52 45

Cam cylinders Article 5256 DB Cam cylinder Pin tumblers 5 Brass Brass, polished nickel-plated Keys in series / locking 2 / - Function Key rotation: 90. Key removable in both positions. Further cams upon request, see p. 50 ff. Order specifications Closing direction as per closing direction table, see p. 52 Article 5712 Cam cylinder Pin tumblers 5 Brass Brass, satin chromium-plated Keys in series / locking - / 2 Function Key rotation: 360. Cam rotation: 90. Order specifications Closing direction A or B 46

Cam cylinders Article 5256/42 Cam cylinder Pin tumblers 5 Brass Brass, polished nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 90. Key removable only in locked position. Further cams upon request, see p. 50 ff. Order specifications Closing direction as per closing direction table, see p. 52 Article 5254 Cam cylinder Pin tumblers 5 Brass Brass, polished nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 90. Key removable only in locked position. Further cams upon request, see p. 50 ff. Order specifications Closing direction as per closing direction table, see p. 52 47

Cam cylinders Article 5254 DB Cam cylinder Pin tumblers 5 Brass Brass, polished nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 90. Key removable in both positions. Further cams see p. 50 ff. Order specifications Closing direction as per closing direction table, see p. 52 Article 5560 Cam cylinder Brass Brass, polished. Screw-down plate: nickel-plated. Pin tumblers 3 Keys in series / locking 2 / - Function Key rotation: 90. Key removable in both positions. Order specifications Closing direction as per closing direction table, see p. 52 48

Cam cylinders Article 5614 Cam cylinder Pin tumblers 3 Brass Brass, polished nickel-plated Keys in series / locking 2 / - Function Key rotation: 90. Key removable only in locked position. Order specifications Closing direction as per closing direction table, see p. 52 Article 5688 Cam cylinder Pin tumblers 4 Brass Brass, polished nickel-plated Keys in series / locking 2 / - Function Key rotation: 90. Key removable only in locked position. Order specifications Closing direction as per closing direction table, see p. 52 49

Central locking devices Article 5263 Central locking device Pin tumblers 5 Keys in series / locking Function Order specifications Brass Brass, satin nickel-plated 2 / 2 Locking pin is retracted by clockwise or counter-clockwise rotation of the key. F= Slot width 4mm, flat dead bolt. B= Slot width 3.3mm, dome-shaped dead bolt. BF= Slot width 3.3mm, flat dead bolt. Article 5263F/30 Central locking device Pin tumblers 5 Keys in series / locking Function Brass Brass, satin nickel-plated 2 / 2 Locking pin is retracted by clockwise or counter-clockwise rotation of the key. 36

Central locking devices Article 5263BF/34 Central locking device Pin tumblers 5 Keys in series / locking Function Brass Brass, satin nickel-plated 2 / 2 Locking pin is retracted by clockwise or counter-clockwise rotation of the key. Article 5263BF/40 Central locking device Pin tumblers 5 Keys in series / locking Function Brass Brass, satin nickel-plated 2 / 2 Locking pin is retracted by clockwise or counter-clockwise rotation of the key. 37

Central locking devices Article 5772 Central locking device Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 360. Cam lever rotation: 180. Accessories Escutcheon Order specifications Please indicate LH or RH with order. Article 5775 Central locking device Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 360. Stroke: 10mm. Accessories Escutcheon. Rod length: 600 mm, other lengths upon request. 38

Central locking devices Article 5776 Central locking device Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 360. Stroke: 10mm. Accessories Escutcheon Order specifications Please indicate LH or RH with order. Article 5776/30 Central locking device Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 360. Drawer. Stroke: 10mm. Accessories Escutcheon 39

Central locking devices Article 5856/42 Central locking device Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 360. Follower rotation: 180. Accessories Escutcheon Article 5856/43 Central locking device Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 360. Follower rotation: 180. Accessories Escutcheon 40

Central locking devices Article 5856/44 Central locking device Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 360. Follower rotation: 180. Accessories Escutcheon Article 5856/46 Central locking device Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 360. Follower rotation: 180. Accessories Escutcheon 41

Push cylinders Article 5269 Push cylinder Pin tumblers 5 Keys in series / locking Accessories Order specifications Brass Brass, satin, polished or satin nickel-plated 2 / 2 Escutcheon length A = 24mm, 29mm or 37mm Article 5763 Push cylinder Pin tumblers 5 Keys in series / locking Function Accessories Messing Brass, satin nickel-plated 2 / 2 Key removable in both positions Escutcheon 28

Push cylinders Article 5860 Push cylinder Pin tumblers 5 Keys in series / locking Function Accessories Brass Brass, satin nickel-plated 2 / 2 Key removable in both positions. Cylinder latches only when locked. Escutcheon Article 5766 Push cylinder Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 90. Accessories Order specifications Escutcheon. Striking plate. Closing direction A or B 29

Push cylinders Article 5784 Turn and push cylinder Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 90. Drawer. Accessories Escutcheon Article 5633 Push cylinder Pin tumblers 5 Keys in series / locking Function Brass Brass, satin nickel-plated 2 / 2 Can be locked by pushing in the cylinder (without key). 30

Push cylinders Article 5647/30 Turn and push cylinder Pin tumblers 5 Brass Brass, satin chromium-plated Keys in series / locking 2 / 2 Function Key rotation: 90. Key removable in both positions. Combined stroke and rotation only with key. Article 5835/30 Cam push cylinder Pin tumblers 5 Brass Brass, satin nickel-plated Keys in series / locking 2 / 2 Function Key rotation: 90. Key removable in both positions. Order specifications Please indicate LH or RH with order. 31

Push cylinders Article 5567 Turn and push cylinder Pin tumblers 3 Keys in series / locking Function Brass Brass, polished nickel-plated 2 / - See table. Article 5773 End cap closure for glass doors Pin tumblers 5 Keys in series / locking Function Order specifications Brass Brass, satin chromium-plated 2 / 2 Key removable in both positions. Glass thickness 4-6mm. Please indicate LH or RH with order. 32

Push cylinders Article 5774 End cap closure for glass doors Pin tumblers 5 Keys in series / locking Function Order specifications Brass Brass, satin chromium-plated 2 / 2 Key removable in both positions. Glass thickness 6-8mm. Please indicate LH or RH with order. Article 5568 Turn and push cylinder Pin tumblers 3 Keys in series / locking Function Brass Brass, polished nickel-plated 2 /- Key removable in both positions. 33

Push cylinders Article 5658/30 Push cylinder Pin tumblers 4 Keys in series / locking Brass Brass, satin chromium-plated 2 / 2 Article 5888 Push cylinder for window handle Pin tumblers 5 Keys in series / locking Function Brass Brass, satin nickel-plated 2 / - Key removable in both positions. 34

Further cylinder types and cabinet locks Combination with profile cylinders CES cylinder no. 5746 scandinavian version n length 25.7 mm or 30.7 mm n 5 pin tumblers n solid brass, finishes see page 17 n 3 keys of brass or steel nickel plated, within key s nickel silver n 60.000 different key changes possible (standard key) n function: keyed different or keyed alike, within masterkey, within grand masterkey CES cylinder no. 5746/31 scandinavian version inside cylinder suitable to 5746 as double cylinder set

CES double cylinder no. 610 CES oval double cylinder no. 710 swiss version n basic length 63 mm, extension in 4/5 mm increments n 5 pin tumblers each side n solid brass, finishes see page 17 n 3 keys of nickel silver n 30.000 different key changes possible (standard key) n function: keyed different or keyed alike, within masterkey, within grand masterkey n with fixing screw british version n basic length 55 mm, extension in 4/5 mm increments n 5 pin tumblers each side n solid brass, finishes see page 17 n 3 keys of brass or steel nickel plated, within key s nickel silver n 60.000 different key changes possible (standard key) n function: keyed different or keyed alike, within masterkey, within grand masterkey n with fixing screw CES knob cylinder no. 615 CES oval knob cylinder no. 715 swiss version n basic length 63 mm, extension in 4/5 mm increments n 5 pin tumblers n solid brass, finishes see page 17 n 3 keys of nickel silver n different knob shapes/materials n 30.000 different key changes possible (standard key) n function: keyed different or keyed alike, within masterkey, within grand masterkey n with fixing screw british version n basic length 55 mm, extension in 4/5 mm increments n 5 pin tumblers n solid brass, finishes see page 17 n 3 keys of brass or steel nickel plated, within key s nickel silver n different knob shapes/materials n 60.000 different key changes possible (standard key) n function: keyed different or keyed alike, within masterkey, within grand masterkey n with fixing screw CES half cylinder no. 651 1/2 CES oval half cylinder no. 751 1/2 swiss version n basic length 41,5 mm, extension in 4/5 mm increments n 5 pin tumblers n solid brass, finishes see page 17 n 3 keys of nickel silver n follower adjustable in 12 positions n 30.000 different key changes possible (standard key) n function: keyed different or keyed alike, within masterkey, within grand masterkey n with fixing screw british version n basic length 37,5 mm, extension in 4/5 mm increments n 5 pin tumblers n solid brass, finishes see page 17 n 3 keys of brass or steel nickel plated, within key s nickel silver n 60.000 different key changes possible (standard key) n function: keyed different or keyed alike, within masterkey, within grand masterkey n with fixing screw

striking plates Striking plates for wooden doors Striking plates for metal doors s/finishes: steel lacquered, brass colour; steel lacquered, silver colour; stainless steel; brass polished s/finishes: steel galvanized, silver lacquered; stainless steel; plastic coated 0522-16 0522-17 0522-18 5729 2524 for locks 7734, 7790, 7710 for locks 7700-01, 7734-01 for lock 7730-02 for locks 5434, 5630, 5834 for locks 5434, 5630, 5834 thickness: 6, 8, 10 or 12 mm 0590 5730 for locks 9034, 9090 for lock 5530 s/finishes: stainless steel; brass polished s/finishes: steel galvanized, silver lacquered; stainless steel; plastic coated

CES profile cylinders Standard version CES double cylinder no. 810 basic length 55 mm, extension in 4/5 mm increments 5 pin tumblers each side solid brass, finishes see page 17 3 keys of brass or steel nickel plated 60.000 different key changes possible according to German Standard DIN 18252/EN 1303 with fixing screw M 5 CES knob cylinder no. 815 basic length 55 mm, extension in 4/5 mm increments 5 pin tumblers solid brass, finishes see page 17 3 keys of brass or steel nickel plated different knob shapes/materials 60.000 different key changes possible according to German Standard DIN 18252/EN 1303 with fixing screw M 5 CES half cylinder no. 851 1/2 basic length 37,5 mm, extension in 4/5 mm increments 5 pin tumblers solid brass, finishes see page 17 3 keys of brass or steel nickel plated follower adjustable in 12 positions 60.000 different key changes possible according to German Standard DIN 18252/EN 1303 with fixing screw M 5

CES profile inserts CES article no. 802/30 basic length 55 mm, extension in 4/5 mm increments solid brass, finishes see page 17 different knob shapes/materials function: inside with knob/other side with coin, screw driver etc. (emergency function) with fixing screw M 5 CES article no. 802/4 basic length 55 mm, extension in 4/5 mm increments solid brass, finishes see page 17 different knob shapes/materials function: inside with knob/other side with red/white indicator and Allen key (emergency function) with fixing screw M 5, direction necessary CES article no. 802 1/2-3 basic length 37,5 mm, extension in 4/5 mm increments solid brass, finishes see page 17 different knob shapes/materials function: only one side with knob with fixing screw M 5 Further types of inserts are available: blind insert, one side key/other side blind, one side knob/other side blind

Service key s Self-Assembling CES offers their partners for more flexibility the possibility of self-assembling of masterkey and grand masterkey s in special key section series. The cylinders are delivered pre-loaded and could be assembled very easily for the calculated. Two special key section series are available: PSM (conventional), patented until 2017 WSM (reversible key ), patented until 2020 Necessary equipment Key cutting machine Engraving machine or engraving equipment Special software for calculating and storage of the technical data of the key With the s PSM or WSM and with the necessary equipment our partners are in a position to assemble key s up to a certain size or degree of difficulty in one or more reserved key sections by themselves. For huge-sized masterkey s CES offers their partners the possibilty to order service key s which are manufactured by CES. Together with the delivery of the service key s CES furnishes their partners with all the necessary data that the partner is able to offer the after sales services such as self-assembling of replacement and extension cylinders and the cutting of keys. The advantages With a little storage of frequently used cylinder components CES partners could react flexible to the customers requests. As no other dealer in the same area receives this reserved key section series CES partners could establish long term customer relationships. CES offers the necessary training of the partner s staff.

The building blocks of security CES profile cylinders as modular s C.Ed.Schulte GmbH Zylinderschloßfabrik

More flexibility less effort The advantages are obvious: You have no more problems with too short or too long cylinders, you can make the cylinder to measure on the spot and in next to no time and you save time and effort. Maximum security is ensured by the stainless steel tear-off protection for the connection piece. With our cylinders, also this security feature is modular and provides the perfect complement to our reliable antidrilling and antipulling protection (classes BS1 to BZ2). All required semi-finished parts are also available as a complete set including fitting device and fitting instructions in a handy case. The combination of modular and conventional CES cylinders is possible. Available s: PS, WZ, SP, KBZ, KM, WO and WM Modular cylinders are also available for existing KB and U5 locking s. Mechanical locking cylinders are also available as modular s. This means that the length of these cylinders can be adapted on site so as to match the thickness of the door leaf, using appropriate housing extensions and connection pieces. Available cylinder types: Double cylinder 810 Single cylinder 851 1/2 Knob cylinder 815 C.Ed.Schulte GmbH Zylinderschloßfabrik Double cylinder, locking on both sides 8710 Friedrichstrasse 243, D-42551 Velbert P. O. B. 101180, D-42547 Velbert Phone: +49 (20 51) 204-0 Fax: +49 (20 51) 204-229 E-mail: info@ces-cylinder.de www.ces-cylinder.de Subject to technical changes without notice modular 11/2007

CES System WM The reversible key section series with trademark protection for high standards in industrial building www.ces.eu A company of CESGRUPPE

Locking technology with trademark protection The CES WM series is a reversible key designed for industrial buildings. Highest locking precision and multiple security queries ensure optimum protection against manipulation. As a special feature, the CES WM enjoys the protection of a registered trademark. In addition to the protection afforded by a patent, a trademark offers an indefinite legal protection against unauthorized duplication of the original keys. The WM can be combined with the electronic locking and access control solutions available from CEStronics. For entrances, access roads or company areas, where access must be restricted to defined times, electronic locking components are the solution of choice as they provide a high level of flexibility for granting and withdrawing access authorizations. Successful enterprises rely on CES locking engineering with the trademark-protected WM. For reasons of security, we do not quote any references at this point. However, we shall gladly establish a contact to users.

The WM in line with DIN 18252/EN 1303 Optimum locking security The WM has up to 25 locking elements on each cylinder side: up to 7 spring-loaded locking pins, 16 combination pins and 2 locking bars ensure a high level of security. Integrated basic protection against drilling Already in their standard version, all cylinders of the WM are provided with an integrated basic protection against drilling. Different materials, such as hardened steel for key and driver pins, are employed to make drilling more difficult. At least one driver pin and at least one key pin are made of hardened steel. And stepped locking pins that cant if a drilling attempt is made prevent the opening of the cylinder. Locking bar technology Thanks to the use of locking bars, the locking surfaces are multiplied which guarantees the long-term functioning of the. Strong nickel silver key Very handy and made according to DIN standard. The key shank is at least 14 mm long and perfectly suited for commercial armatures with cylinder covering. Inserting the key into the cylinder is easy thanks to a specially shaped and patented key tip. A guiding groove along the entire cylinder plug ensures a positive transfer of the key torque and prevents breaking of the key. The key section is subject to indefinite legal protection. Security card Replacement orders and extensions are only possible against presentation of the security card supplied with the locking.

Options and extras Modulare Profile cylinders of the WM are also available in modular design. This means that if necessary the length of these modular cylinders can be adapted to the thickness of the door on site, saving both time and money. Additional antidrilling and antipulling protection For applications in particularly security-relevant areas, WM cylinders can be equipped with additional hard-metal pins and plates in the hull and on the cylinder plug face. Double, single and knob cylinders are also available as VdS certified cylinders of the classes AZ, BZ and BZ+ (nos. 910, 951 1/2, 915). Bump-proof version Sea-water resistance Wear resistant version Colours Cylinders are available in a wide range of colours. Upon request, both cylinder halves can also be supplied in different colours. Furniture / special cylinders The WM series is also suitable for furniture and special cylinders from the CES range. Electronic access solutions WM cylinders are compatible with all electronic locking s available from CEStronics. Accessories Locking management software CESportier vision. A company of CESGRUPPE

Selection of DIN 18252 / EN 1303 compliant designs Double cylinder no. 810 WM Brass, satin nickel plated 1 nickel silver key Double cylinder no. 8710 WM with emergency and danger function Brass, satin nickel plated Locking on both sides 1 nickel silver key Single cylinder no. 851 1/2 WM Brass, satin nickel plated Follower adjustable in 12 positions 1 nickel silver key Knob cylinder no. 815 WM Brass, satin nickel plated One side locking Other side aluminium knob, F1, various knob shapes available (figure shows shape H) 1 nickel silver key Cam cylinder no. 5558/30 WM Brass, polished nickel plated Locking movement 90º Locking direction as desired Fitting dimension 25 mm 1 nickel silver key Cylinder padlock no. 215 WM Stainless steel shackle Housing 58 mm wide, 50 mm high Latches without locking Shackle clearance 35 mm (standard) 1 nickel silver key Double cylinder no. 802/5 WM Brass, satin nickel plated One side locking, the other side blind 1 nickel silver key Basic lengths for profile cylinder: 5 pins: 27,5/27,5 mm 6 pins: 31,5/31,5 mm 7 pins: 35,5/35,5 mm Further variants available. Also available in Swiss, English and Scandinavian profile.

C. Ed. Schulte GmbH Zylinderschloßfabrik Friedrichstraße 243 D-42551 Velbert f +49 (0)2051-204-0 h +49 (0)2051-204-229 e info@ces.eu www.ces.eu CEStronics GmbH Friedrichstraße 243 D-42551 Velbert f +49 (0)2051-204-0 h +49 (0)2051-204-229 e info@ces-tronics.de CESlocks GmbH Mettmanner Str. 119 D-42549 Velbert f +49 (0)2051-204-204 h +49 (0)2051-204-229 e info@ces-locks.de CESfrance SARL 16 Boulevard Saint Germain F-75005 Paris f +33 (0)1-44 87 07 56 h +33 (0)1-43 07 35 78 e info@fr.ces.eu www.ces.eu/fr CESnederland B.V. Lage Brink 9 NL- 7317 BD Apeldoorn f +31 (0)55-52 66 89-0 h +31 (0)55-52 66 89-9 e info@nl.ces.eu www.ces.eu/nl CESitalia srl V. d. vecchie Fondamenta, 4 Straße d. A. Gründungen 4 I-39044 Egna / Neumarkt (BZ) f +39 0471-812 294 h +39 0471-812 294 e info@it.ces.eu www.ces.eu/it CESrom srl. Str. Metalurgistilor 3 D RO-550137 Sibiu f +40 (0)269-206 00-2 h +40 (0)269-206 00-5 e info@ro.ces.eu Your technical adviser on security matters: Subject to technical changes without notice WM 11/2009_VKF1013 www.ces.eu A company of CESGRUPPE

CES WO Horizontal reversible key section series with patent protection for industrial buildings www.ces.eu A company of CESGRUPPE

Innovative locking engineering with legal protection To ensure that a cylinder of our WO series can only be opened by authorized persons with the correct key, CES has come up with quite an array, for instance, a completely new and varied key section and additional especially effective locking functions. On each cylinder side, there are up to 22 locking elements, comprising up to 6 spring-loaded, stepped and vertically acting locking pins, and up to 14 combination pins that are also stepped and act radially on two locking bars that are offset by 90. The patented geometry of the key and of the cylinder plug offers protection against an unauthorized duplication of keys and in conjunction with the mouth of the key channel makes inserting the key easy. The WO can be combined with the electronic locking and access control solutions available from CEStronics. For entrances, access roads or special company areas, where access must restricted to defined times, electronic locking components are the solution of choice as they provide a high level of flexibility for granting and withdrawing access authorizations. Successful enterprises rely on CES locking engineering with the patented WO. For reasons of security, we do not quote any references at this point. However, we shall gladly establish a contact to users.

The WO in line with DIN 18252/EN 1303 Optimum locking security The WO has up to 22 locking elements on each cylinder side: up to 6 spring-loaded locking pins, 14 combination pins and 2 locking bars ensure a high level of security. Integrated basic protection against drilling Already in their standard version, all cylinders of the WO are provided with an integrated basic protection against drilling. Different materials, such as hardened steel for key and driver pins, are employed to make drilling more difficult. At least one driver pin and at least one key pin are made of hardened steel. And stepped locking pins that cant if a drilling attempt is made prevent the opening of the cylinder. Strong nickel silver key Very handy and made according to DIN standard. The key shank is at least 14 mm long and perfectly suited for commercial armatures with cylinder covering. Inserting the key into the cylinder is easy thanks to a specially shaped and patented key tip. A guiding groove along the entire cylinder plug ensures a positive transfer of the key torque and prevents breaking of the key. Security card Replacement orders and extensions are only possible against presentation of the security card supplied with the locking. Locking bar technology Thanks to the use of locking bars, the locking surfaces are multiplied which guarantees the long-term functioning of the.

Options and extras Modular Profile cylinders of the WO are also available in modular design. This means that if necessary the length of these modular cylinders can be adapted to the thickness of the door on site, saving both time and money. Additional antidrilling and antipulling protection For applications in particularly security-relevant areas, WO cylinders can be equipped with additional hard-metal pins and plates in the hull and on the cylinder plug face. Double, single and knob cylinders are also available as VdS certified cylinders of the classes AZ, BZ and BZ+ (nos. 910, 9710, 951 1/2, 915). Bump-proof version Sea-water resistance Wear resistant version Colours Cylinders are available in a wide range of colours. Upon request, both cylinder halves can also be supplied in different colours. Furniture / special cylinders The WO series is also suitable for furniture and special cylinders from the CES range. Electronic access solutions WO cylinders are compatible with all electronic locking s available from CEStronics Accessories Locking management software CESportier vision. A company of CESGRUPPE

Selection of DIN 18252 / EN 1303 compliant designs Double cylinder no. 810 WO Brass, satin nickel plated 1 nickel silver key Double cylinder no. 8710 WO with emergency and danger function Brass, satin nickel plated Locking on both sides 1 nickel silver key Single cylinder no. 851 1/2 WO Brass, satin nickel plated Follower adjustable in 12 positions 1 nickel silver key Knob cylinder no. 815 WO Brass, satin nickel plated One side locking Other side aluminium knob, F1, various knob shapes available (figure shows shape H) 1 nickel silver key Cam cylinder no. 5558/30 WO Brass, polished nickel plated Locking movement 90º Locking direction as desired Fitting dimension 25 mm 1 nickel silver key Cylinder padlock no. 215 WO Stainless steel shackle Housing 58 mm wide, 50 mm high Latches without locking Shackle clearance 35 mm (standard) 1 nickel silver key Double cylinder no. 802/5 WO Brass, satin nickel plated One side locking, the other side blind 1 nickel silver key Basic lengths for profile cylinder: 5 pins: 27,5/27,5 mm 6 pins: 31,5/31,5 mm Further variants available. Also available in Swiss, English and Scandinavian profile.

C. Ed. Schulte GmbH Zylinderschloßfabrik Friedrichstraße 243 D-42551 Velbert f +49 (0)2051-204-0 h +49 (0)2051-204-229 e info@ces.eu www.ces.eu CEStronics GmbH Friedrichstraße 243 D-42551 Velbert f +49 (0)2051-204-0 h +49 (0)2051-204-229 e info@ces-tronics.de CESlocks GmbH Mettmanner Str. 119 D-42549 Velbert f +49 (0)2051-204-204 h +49 (0)2051-204-229 e info@ces-locks.de CESfrance SARL 16 Boulevard Saint Germain F-75005 Paris f +33 (0)1-44 87 07 56 h +33 (0)1-43 07 35 78 e info@fr.ces.eu www.ces.eu/fr CESnederland B.V. Lage Brink 9 NL- 7317 BD Apeldoorn f +31 (0)55-52 66 89-0 h +31 (0)55-52 66 89-9 e info@nl.ces.eu www.ces.eu/nl CESitalia srl V. d. vecchie Fondamenta, 4 Straße d. A. Gründungen 4 I-39044 Egna / Neumarkt (BZ) f +39 0471-812 294 h +39 0471-812 294 e info@it.ces.eu www.ces.eu/it CESrom srl. Str. Metalurgistilor 3 D RO-550137 Sibiu f +40 (0)269-206 00-2 h +40 (0)269-206 00-5 e info@ro.ces.eu Your technical adviser on security matters: Subject to technical changes without notice. WO 11/2009_VKF1001 www.ces.eu A company of CESGRUPPE