e-ask System (electronic Access & Security Keyless-entry) You probably wouldn t buy a new car without remote power locking and the same applies to the non-automotive vehicle markets. Increasingly, these vehicles are becoming sophisticated with OEM s incorporating many automotive-like aspects. TriMark s successful e-ask (electronic Access and Security Keyless-entry) products include keyless entry, power latch release, keyless ignition/start and control of lighting, horns, sensors, and motorized actuators. TriMark s e-ask systems are compatible with CAN SAE J1939, RV-C, and other multiplexing protocols. TriMark s e-ask Accessories There are numerous options available to allow the e-ask systems to provide extra value and functionality. Optional kits can include: Wiring harnesses for all connection points of system Extra relays Switches, door contacts Actuators Mounting hardware Mounting brackets Door latches Door paddle handles Customized wiring harnesses Additional FOB transmitters and custom graphics Different programming functions allows for customized functionality with e-fob or e-pad outputs including standard mode, cargo mode or sustained mode Security system integration Multiplexed or discrete communications Electronic accessories 8 e-ask 94
500-1000 e-ask System TriMark s top level e-ask system consists of a selection of compatible components that allow for complete keyless entry for on or off-highway vehicle applications. The incorporation of keyless-entry into TriMark mechanical latches, handles and systems provides additional security and convenience for access door systems. This system includes both a touch pad and remote fob transmitter for the ultimate in end user convenience and functionality. Easy and intuitive to operate Rugged and durable construction is compliant to onroad, off-road, and industrial environmental requirements I/O module with on-board locking and unlocking relays Can control up to 20+ entry/compartment doors (expandable) and utilizes staggered door control for minimized current draw Multiplexing communications (CAN, SAE J1939, RV-C, etc. Increased self-diagnosing and serviceability with common tools Provides interface with other compatible vehicle modules Locking/unlocking confirmation Ability to provide 5 OEM definable functions from keypad, including ability to unlock one side of motor home baggage doors at a time 3 security system inputs (ability to sense entry door (s) and baggage door(s), and other security system devices such as glass break and motion detectors) Variable timed light activation output (porch, compartment or interior lighting) Standard kit make up includes: keypad, 2 pre-trained RF remote fob transmitters, RF receiver, I/O module, harness connecting receiver and I/O module, gasket, push button switch, LED assembly, key rings and manual Customized wire harnesses Additional fob transmitters 2 different programming functions; standard mode, and cargo mode. Standard mode allows for the lock/ unlocking of doors plus panic mode and one auxiliary output (controls lighting, opens compartment etc.). Cargo mode allows for the lock/unlocking of main personnel doors plus independent control of many cargo/compartment doors. e-fob Reliable radio frequency (RF) transmission offers high security with code hopping technology and is FCC- Part 15 compliant 4-button standard fob (other configurations available) Customized graphics possible (buttons and logos) Can add up to 4 fob transmitters to vehicle This product is covered by one or more of the following: U.S. Patent No. 6,789,003 7,034,655 7,119,709 Design Patent No. D486,376 D563,097 e-pad Tactile, visual, and audio feedback Over 3000 code combinations with tamper lock-out feature Lighted keypad for more effective night time usage Vertical and horizontal orientations 5 user codes can be assigned Multiple layer code control Multiple keypads integration (RF) 95
500-1100 e-fob System This cost-effective, simple, and integrated system offers increased security, convenience and functionality with reduced system installation and lower installation costs for demanding users of RV s, heavy trucks, emergency vehicles, agricultural and construction equipment. Base system provides added convenience and security via a standard remote radio frequency (RF) transmitter providing automotive convenience to your vehicle. Increased end user convenience, operation is easy and intuitive Rugged and durable construction, is compliant to onroad, off-road, and industrial environmental requirements Increased vehicle security with multiple triggers and outputs Includes on-board locking and unlocking relays for up to 4 actuators Locking/unlocking confirmation Ignition controlled auto-locking Starter deactivation available for increased security High security with code hopping technology offers reliable radio frequency (RF) transmission and is FCC-Part 15 compliant Patents Pending Design Patent No. D563,097 D590,780 D589,000 Standard 12 VDC power e-fob receiver is easily installed with (2) #6 or M3 screws (not included) and can be mounted in a concealed location Standard kit make up includes: 2 pre-trained RF remote fob transmitters, RF receiver, 14 wire harness, 10 wire harness, 2 wire harness, push button switch, and LED assembly key rings and manual Customized wire harnesses Customized graphics possible (buttons and logos - please inquire) Can add up to 4 fob transmitters to vehicle 3 different programming functions; standard mode, cargo mode and sustained mode. Standard mode allows for the lock/unlocking of doors plus panic mode and one auxiliary output (controls lighting, opens compartment etc). Cargo mode allows for the lock/unlocking of main personnel doors plus independent control of many cargo/compartment doors. Sustained mode allows for the lock/unlocking of doors plus continuous output control with lower buttons pressing. (RF) 96
510-0100 e-ask I/O Module DESIGNED FOR: Replacement components of TriMark s e-ask systems 2 different functions; standard and cargo modes. Modes provide customized remote fob transmitter use. Standard mode allows for the lock/unlocking of doors plus panic mode and one auxiliary output (controls lighting, opens compartment etc.). Cargo mode allows for the lock/unlocking of main personnel doors plus independent control of many cargo/ compartment doors. I/O module is easily installed with (4) 1/4 or M6 screws (not included) and can be mounted in a concealed location Standard 12 VDC power U.S. Patent No. 6,789,003 Design Patent No. D563,097 Other Patents Pending (RF) 97
510-0250 e-ask CAN IO and RF Module Keyless-entry security and convenience for access door systems through an electrical interface that includes both a keypad and remote fob transmitter for the ultimate in end-user convenience and functionality. DESIGNED FOR: TriMark s e-ask systems consist of a selection of compatible components that allow for complete keyless entry for on and off-highway vehicle applications Incorporation into TriMark mechanical latches and handles by providing keyless entry, security and convenience for access door systems through a RF remote fob electronics Integration to existing or independent SAE J1939 or other CAN based multiplexing buses SAE J1939 and other multiplexing protocols Rugged and durable construction Compliant to on-road, off-road, and industrial environmental requirements Designed with on-board relays Variations for single or multiple door control Staggered outputs for minimized current draw Water proof (IP 67) and non-water proof versions available Compatible with 433 MHz Radio frequency (RF) remote transmitter fob Compliant to FCC, IC, and EU RF requirements Available with security system, lighting control, keypad connectivity, ignition connectivity, and other auxiliary device control Customizable via various hardware configurations or software modifications Customized kits can included water proof door modules, dash mount IO modules, keypads, RF transmitter, wiring, power lock actuators and other security system accessories. Compliant to SAE J1939 CAN and other multiplexing protocols U.S. Patent No: 6,789,003 7,034,655 7,119,709 (RF) 98
530-0100 e-fob Transmitter DESIGNED FOR: Replacement components of TriMark s e-ask systems e-fob receiver is easily installed with (2) #6 or M3 screws (not included) and can be mounted in a concealed location Standard 12 VDC power 3 different programming functions; standard mode, cargo mode and sustained mode. Modes provide customized remote fob transmitter use. Standard mode allows for the lock/unlocking of doors plus panic mode and one auxiliary output (controls lighting, opens compartment etc.). Cargo mode allows for the lock/unlocking of main personnel doors plus independent control of many cargo/compartment doors. Sustained mode allows for the lock/unlocking of doors plus continuous output control with lower buttons pressing. 4-button standard and cargo fob, 2-button fob, and wall mount Customized graphics possible (buttons and logos - please inquire) Customized wire harnesses Design Patent No. D563,097 D590,780 D589,000 (RF) 99
500-1200 e-pad System The integration of mechanical handles/latches and keyless-entry electrical products is now available with TriMark s e-ask System. This integrated system offers increased security, convenience and functionality with reduced system installation complexity and lower installation costs for demanding users of RVs, heavy trucks, emergency vehicles, agricultural and construction equipment. User-friendly keypad system provides visual, audible and touch feedback. Keypad can be mounted horizontally, vertically, and with means to protect against vandalism and other tampering. This system includes both a touch pad and an I/O module for the ultimate in keyless functionality. Easy and intuitive to operate Rugged and durable construction, is compliant to onroad, off-road, and industrial environmental requirements I/O module with on-board locking and unlocking relays Can control up to 20 entry/compartment doors (expandable), uses staggered door control for minimized current draw Locking/unlocking confirmation Ignition controlled auto-locking Starter deactivation available for increased security Ability to provide 5 OEM definable functions from keypad, including ability to unlock one side of motor home baggage doors at a time 3 security system inputs (ability to sense entry door(s) and baggage door(s), and other security system devices such as glass break and motion detectors) 3 variable timed light activation output (porch, compartment or interior lighting) Standard kit includes: Keypad, I/O module, gasket, push button switch, and LED assembly key rings and manual With e-fob remote transmitter integration With security system integration Customized wire harnesses Multiplexed or discrete communications 2 different functions; standard and cargo modes. Standard mode allows for the lock/unlocking of doors plus panic mode and one auxiliary output (controls lighting, opens compartment etc.). Cargo mode allows for the lock/unlocking of main personnel doors plus independent control of many cargo/compartment doors. Standard 12 VDC power Keypad is easy to install with (2) #8 or M4 flat head screws (not included) Keypad can be installed in a wide range of locations in door - either horizontal or vertical orientation I/O module is easily installed with (4) 1/4 or M6 screws (not included) and can be mounted in a concealed location U.S. Patent No. 6,789,003 7,034,655 7,119,709 Design Patent No. D489,376 Keypad 100
540-0100 e-pad Keypad This cost-effective, simple, and integrated system offers increased security, convenience and functionality with reduced system installation complexity and lower installation costs for demanding users of RVs, heavy trucks, emergency vehicles, agricultural and construction equipment. Increased end user convenience Easy and intuitive to operate Rugged and durable construction Compliant to on-road, off-road, and industrial environmental requirements Can control numerous entry/compartment doors Independent control of multiple door zones Tactile, visual, and audio feedback Over 3000 code combinations with tamper lock-out feature Lighted keypad for more effective night time usage Vertical and horizontal orientations 5 user codes can be assigned Multiple layer code control With e-fob remote transmitter integration Vertical and horizontal keypad Complete kit with wire harnesses and other accessories Customized wire harnesses Keypad is easy to install with (2) #8 or M4 flat head screws (not included) Can be installed in a wide range of locations in door - either horizontal or vertical orientation Standard 12 VDC power U.S. Patent No. 7,034,655 Design Patent No. D486,376 Keypad 101
540-0125 e-pad With Relays TriMark s e-ask systems consist of a selection of compatible components that allow for complete keyless entry for on-highway vehicle applications Increased end user convenience Easy and intuitive to operate Rugged and durable construction Compliant to on-road environmental requirements Tactile and audio feedback Over 3000 code combinations with tamper lock-out feature Vertical and horizontal orientations 5 user codes can be assigned Multiple layer code control 12v powered outputs Stand-alone keypad Vertical and horizontal keypad Complete kit with wire harnesses and other accessories Customized wire harnesses Keypad is easy to install with (2) #8 or M4 flat head screws (not included) Can be installed in a wide range of locations in door - either horizontal or vertical orientation Standard 12 VDC power Design Patent No. D486,376 Keypad 102
540-0200 Lighted Grab Handle With Keypad (e-grab) This product incorporates TriMark's e-ask keypad into a stylish entry assist handle for RV coaches, motor homes and travel trailers. Offering increased end user convenience with high end look and feel, the grab handle provides keyless entry, security, and convenience through a keypad electronic interface. Integration of an optional doorbell is available. Incorporation with TriMark mechanical latches, handles and systems by providing keyless entry, security, and convenience for access door systems through a keypad electronics interface Multi-plex or discrete e-pad Keypad (Reference platforms 540-0100 and 500-1000 for additional information) With or without door bell feature Handle rod can be personalized with manufacturer name, model, logo etched Complete kit with wire harnesses and other accessories With e-fob remote transmitter integration With security system integration Increased end user convenience Offers modern styling with high end look and feel Rugged and durable construction is environmentally sealed for long life Lighted keypad and handle rod for more effective night time usage Tactile, visual and audio feedback with the ability to control the handle rod LED light also Can control numerous entry/compartment doors with independent control of multiple door zones FINISH: High quality polished copper-nickel-nickel chrome is durable and stylish MATERIAL: Sturdy zinc die cast alloy housing, cover and end cap Cast acrylic rod in clear finish Easy to install with #8 or M4 fasteners (not supplied) Cost effective modular handle requires fewer holes in sidewall than separate components for ease of installation U.S. Patent No. 7,400,232 Design Patent No. D559,653 Keypad 103
550-0100 Power Lock Actuator DESIGNED FOR: TriMark handles and latches equipped to accept a power lock actuator that provides a push/pull function High impact sealed case design Long travel distance -.83 to.86 inches (21-21.8mm) High output force for reliable locking and unlocking function Reliable and durable to high cycle counts in various environmental extremes Compact design allows for application in restricted space Compatible for use with TriMark power adaptable products Product selection options to ensure optimal fit for various applications With bullet connectors or spade connector With regular or overload protected motor With 2 or 5 wires In a gun style with or without an overload protected motor In a compact, rectangular design with an overload protected motor, clutching mechanism for smooth operation and a rotatable/detachable tip With individual bullet style connectors or spade connector for ease of installation With 2 wires for power or 5 wires for power and actuator sensing Possible customization available to include special connectors, custom wire length and kitting options. TriMark power actuators are easy to install either by integrating mounting directly into available TriMark latches or paddle or with universal hardware parts that include fasteners, a zinc clamp, a mounting strap and a rod 12 volt supply Actuators 104
610-0100 Ignition Switch TriMark s ignition switches satisfy the toughest customers in the roughest environments with superior performance and reliability. Further enhancement is now available by offering a heavy duty ignition switch for on or off-highway applications with KeyOne Plus modular locking system providing One Key One Vehicle convenience. Contact rating: 50 Amp @ 12 VDC continuous (battery) Ignition 20 Amps Accessory 30 Amps (inductive) Start.33 Amps Standard positions: Accessory, Off, On (ignition/ accessory) and Start Rugged and durable construction is environmentally sealed for long life Standard brass Packard Electronic Connectors (#56) KeyOne Plus for a single-key system, keyed alike or keyed random In a wide variety of codes which allows the customer flexibility in keying a unit alike or differently Complete kit with wire harness and connector Custom terminal configurations (please inquire) Custom function and positions (please inquire) FINISH: Retaining nut: black or bright chrome Housing: Satin nickel MATERIAL: Sturdy zinc die cast alloy housing and retaining nut Base: Engineered plastic Terminals and contacts: Tin plated brass Standard 1.00 mounting hole Recommended panel thickness;.115-.225 in. (2.9-5.7mm) Knurled retaining nut is included. Recommended torque in 10 ft-lbs. (13.3 N-m) Switches 105