Folding and sliding door systems
Folding door systems Information Folding doors combining the advantages of classical revolving doors with the practical functioning and elegance of sliding doors. They offer free access to the cabinet or wardrobe interior and do not restrict room space even when open. Freely movable door packages can be moved as desired and permit full access over the entire cabinet or wardrobe width Door pairs can be coupled so that one movement of the hand will open or close the cabinet front. Folding doors are used wherever space-saving solutions together with individual accents are desired. How to choose correct folding door fitting system? Step 1 Basic parameters Example How wide and how high is the cabinet? Width 2700mm, height 2100mm incl. 100mm plinth How many door pairs are to be mounted? 3 door pairs=6 door leafs Approximate door leaf size? Width 450mm (2700:6) Height 2000mm (2100-100) Material? Door thickness? Chipboard, veneered on both sides, 22mm Weight per door pair? 270 N per door pair Step 2 General questions Example Recommendation Fixed on one side or freely movable? Freely movable FT 1, FT 2 Option for coupling door pairs Not required FT 1, FT 2 Front recessed or mounted? Mounted FT 1, FT 2 With or without height adjustment? With FT 1, FT 2 Step 3 Final recommendation Either the fi tting system FT1 or FT2 with tandem roller can be used. If the option of coupling door leaf with automatic folding function is to be retained, FT 1 would have to be selected. Other important details If fi xed on one side, is a carrying rail or just a guide rail needed? Accessories? 5.3
Sliding door systems Information Sliding doors are of impressive elegance. Their smooth running imparts to the furniture a lightness that also determines the style of modern living. Even high door weights and large door sizes can be realised with sliding doors in a clever and aesthetically pleasing way. Folding and sliding door systems The door may remain open without intruding into the room or blocking access to other furniture. How to choose correct sliding door fitting system? Step 1 Basic parameters Example How wide and how high is the cabinet? Width 3000mm, height 2100mm incl. 100mm base How many doors are to be mounted? 3 doors Approximate door size? Width 1000mm (3000:3) Height 2000mm (2100-100) Material? Rear door: chipboard, veneered on both sides, 19mm Front door: as before, with mirror on one side (4mm) Weight per door pair? Rear door: 260 N Front door (with mirror): 500 N Step 2 General questions Example Recommendation Vertical or horizontal emphasis Vertical S 1, S 7, Running at the top or bottom At the top S 1, On front, in front, mixed front On front S 1, With or without height adjustment With S 1, Steel ball-bearing or slide-bearing rollers Steel ball-bearing rollers S 1, Step 3 Final recommendation S 1 with height-adjustable roller elements and steel ball-bearing roller for a maximum door weight up to 600N. Other important details If there is a blind, is it fi xed or removable? Accessories? 5.4
Folding and sliding door systems Space saving Free access to wardrobe interior No restriction of space in the room when the door is open Perfect motion Effortless opening Smooth and reliable Flexibility For a wide range of door sizes/ weights Optimal combination of design and practicality 5.6
Folding door systems Freely movable FT1 Item number FT 1 Complete set for one door pair 6338.100.001 Included in a set Roller element pre-assembled Carrying capacity 400N left 1 right 1 Bottom guide roller element pre-assembled left 1 right 1 Made of zinc, steel Made of zinc, steel Top guide support with spacer roller 1 Bottom guide support with spacer roller 1 Made of steel and plastic End stopper, top (supporting plate and screw included) left 1 right 1 Made of steel and plastic Middle hinge with loose steel pin 3 Made of cast metal End stopper bottom 2 Door deflector 2 Made of plastic, clear Accessories as per order Runner rail 6338.001.150 Length: 5 m Please order fixing accessories separately > see page 5.27 Guide rail 6338.011.150 Length: 5 m Please contact your representative for ordering separate pieces 5.7
Ball-bearing rollers allow easy running For extremely high weights per door pair up to 400N (roller elements with four bore cups 700N) For door leaf widths up to 500mm and door leaf thicknesses up to 27mm Door pairs can be individually coupled Middle hinge with loose pin Height adjustment +1.5/-1.5mm Folding and sliding door systems Mounting details Calculation of door leaf width LK = Clear carcase width TB = Door leaf width A = Door/side overlap S = Door gap LK + (2 x A) - [(no. of doors) x S] TB = No. of doors 2 leaf door set 4 leaf door set 6 leaf door set Max. door thickness Roller element with 700 N capacity available. For more information ask your representative 5.8
Folding door systems Freely movable FT2 Item number FT 2 Complete set for one door pair 6341.100.001 Included in a set Roller element with 2 buffers left 1 right 1 Guide roller element with 2 buffers left 1 right 1 Made of black plastic and galvanised steel Made of black plastic and galvanised steel Made of black plastic and steel End stopper 4 Screw and connecting sleeve included Made of cast metal, nickel plated Middle hinge with loose steel pin 3 Door deflector 2 Made of clear plastic Accessories as per order Runner rail, no holes 6341.101.150 Length: 5 m Guide rail, no holes 6341.111.150 Length: 5 m Please order fixing accessories separately > see page 5.27 Please contact your representative for ordering separate pieces 5.9
Toolless fixing of roller elements in the runner rail For high weights per door pair up to 250N or 350N with tandem roller For door leaf widths up to 450mm and door leaf thicknesses up to 27mm Middle hinge with loose pin Height adjustment +2/-2mm Folding and sliding door systems Mounting details Roller element min. 44 47.5 Roller element Ø35x14 deep 64 Ø35x14 deep 24 24 Ø10x12 deep Door deflector 24 Ø5x10 deep 32 32 24 24 min. 24 Middle hinge 35 Ø35x14 deep Guide roller element Guide roller element 24 4 24 LK Rail length = LK - 2 mm A max. 19 mm S min. 1 mm TB A 2 leaf door set 4 leaf door set 6 leaf door set Calculation of door leaf width LK = Clear carcase width TB = Door leaf width A = Door/side overlap S = Door gap LK + (2 x A) - [(no. of doors) x S] TB = No. of doors Roller element with 350 N capacity available. For more information ask your representative 5.10
Folding door systems Fixed on the side FT2A Item number FT 2A Complete set for 2 door pairs (left, right) 6341.200.002 Included in a set Roller element, with 2 buffers left 1 right 1 Guide roller element, with 1 buffer left 1 right 1 Made of black plastic and galvanised steel Made of black plastic and galvanised steel Door deflector 2 Middle hinge with loose steel pin 6 Made of clear plastic Made of cast metal, nickel plated Accessories as per order Runner rail, no holes 6341.101.150 Length: 5 m Guide rail, no holes 6341.111.150 Length: 5 m Please order fixing accessories separately > see page 5.27 Please contact your representative for ordering separate pieces 5.11
Toolless fixing of roller elements in the runner rail For door leaf widths up to 500mm and door leaf thicknesses up to 27mm Middle hinge with loose pin Height adjustment +2/-2mm Folding and sliding door systems Mounting details Example: for 110 hinges Variant with middle hinge 6mm off centre Max. door thickness 5.12
Sliding door systems Vertical emphasis S1 Item number S1 Complete set for 2 doors 6323.100.002 Complete set for 3 doors 6323.100.003 Included in a set Roller element, height adjustable, for rear door Carrying capacity 600N 2 (4) Roller element, height adjustable, for front door Carrying capacity 600N 2 (2) Made of steel Made of steel End stopper, top left - (1) right 2 (2) Catch left - (1) right 1 (1) left / right End stopper, bottom front door (20mm high) 1 (1) rear door (14mm high) 1 (2) Unhinging guard front door 2 (2) rear door 2 (4) rear / front Middle stopper - (1) Hexagon key 4mm 1 (1) Made of steel Guide roller element 80mm front door 2 (4) rear door 2 (2) Made of steel Accessories as per order Runner rail with supportive rear ledge 6323.301.150 Length 5 m Runner rail 6323.501.150 Length 5 m Guide rail 6319.011.150 Length 5 m Guide rail 6319.411.150 Made of plastic Length 5 m Cover plate 6323.029.080 0.8m 6323.029.100 1m 6323.029.120 1.2m 6323.029.160 1.6m Please order fixing accessories separately > see page 5.27 Please contact your representative for ordering separate pieces 5.13
Low-noise fitting Optionally with plastic slide-bearing roller (for door weights up to 450N) or steel ball bearing (for door weights up to 600N) Aluminium runner rail with easily adjustable stoppers For door thicknesses up to 25mm Folding and sliding door systems Mounting details Roller element, 150mm length (600N) Roller element, 80mm length (450N) Drilling scheme Roller element, 150mm length, front door Drilling scheme Roller element, 150mm length, rear door Drilling scheme Roller element, 80mm length Guide roller element, 80mm length, front door Guide roller element, 80mm length, rear door Guide roller element, 50mm length 5.14
Sliding door systems Horizontal emphasis S5+ Item number S5+ Complete set for 2 doors Complete set for 3 doors 6326.200.002 6326.200.003 Included in a set Guide roller element for rear door 2 (4) for front door 2 (2) front door / rear door Roller element for screw fi xing rear door 2 (4) front door 2 (2) rear door / front door Made of galvanised steel Made of galvanised steel End stopper top left - (1) right 2 (2) Catch 2 (4) Made of plastic Made of clear plastic Unhinging guard 2 (2) End stopper bottom 12mm, to screw on 1 (2) 22mm, to screw on 1 (1) Made of plastic Middle stopper - (1) Accessories as per order Made of plastic Runner rail 6326.651.150 Made of steel Length 5 m Guide rail, horizontal 6319.411.150 Made of plastic Length 5 m Please order fixing accessories separately > see page 5.27 Please contact your representative for ordering separate pieces 5.15
Cost efficient runner rail Optionally with plastic slide-bearing roller (for door weights up to 350N) or steel bearing (for door weights up to 450N) For door thicknesses up to 20mm Wide variety of bottom guideway solutions Folding and sliding door systems Mounting details Minimum distance: Front door - blind fixed blind = 12mm removable blind = 5mm Bottom guide rail Drilling scheme for screw fixing Combination catch and unhinging guard Roller element with 450 N capacity available. For more information ask your representative 5.16
Sliding door systems Horizontal emphasis S7 L Door thickness Item number S7 Complete set for 2 doors 16-21 6329.100.002 Complete set for 3 doors 16-21 6329.100.003 Included in a set Made of steel Roller element, for rear door Carrying capacity 450N 2 (4) Roller element, 16-21mm door thickness, for front door, slewable unhinging guard included Carrying capacity 450N left and right left 1 (1) right 1 (1) rear door / front door Made of steel Guide roller element Length 80 mm rear door 2 (4) front door 2 (2) Made of zinc End stopper, bottom right 1 (2) left 1 (2) rear door / front door Made of plastic End stopper top rear door, 14mm 1 (2) front door, 22mm 1 (2) Middle stopper - (1) Catch 1 (2) To be mounted to guide roller element of rear door Unhinging guard for rear door 2 (4) Accessories as per order Runner rail 6329.101.250 Length 5 m Other lengths and finishes on request Guide rail 6319.011.150 Guide rail 6319.411.150 Made of plastic Length 5 m Please order fixing accessories separately > see page 4.27 Please contact your representative for ordering separate pieces 5.17
Low-noise fitting The plinth is used as a solid supporting element Quality ball bearing rollers Ø24mm for smooth running Up to 450N carrying capacity For door thicknesses from 16mm-21mm and 21mm-27mm Folding and sliding door systems Mounting details Catch pin or catch buffer have to be mounted in accordance with door projection Dimensions in parenthesis refer to the version for door thickness from 21mm to 27mm 5.18
Sliding door systems Horizontal emphasis S7 xtra L Door thickness Item number S7 xtra Complete set for 2 doors 21-27 6329.200.002 Complete set for 3 doors 21-27 6329.200.003 Included in a set Roller element, 21mm-27mm door thickness, for front door, slewable unhinging guard included Carrying capacity 550N left 1 (1) right 1 (1) Roller element, rear door Carrying capacity 550N 2 (4) Made of zinc and plastic Unhinging guard For rear door, slewable 2 (4) Made of zinc End stopper, bottom left and right left 1 (2) right 1 (2) Made of galvanised steel Guide roller element rear door 2 (4) front door 2 (2) Catch 1 (2) To be mounted to guide roller element of rear door rear door / front door Made of plastic Accessories as per order End stopper for top rail rear door, 14mm 1 (2) front door, 22mm 1 (2) Runner rail 6329.001.250 Length 5 m Other lengths and finishes on request Cover plate 6329.029.224 1.24m 6329.029.254 1.54m 6329.029.290 0.94m 6329.029.294 1.94m Middle stopper - (1) Guide rail 6319.011.150 6326.011.150 Length 5 m silver anodised 6326.011.250 Length 5 m Other lengths and finishes on request Please order fixing accessories separately > see page 5.27 Please contact your representative for ordering separate pieces 5.19
High-quality, low-noise fitting for carcases without blind The plinth is used as a solid supporting element Quality ball bearing rollers Ø 24mm for smooth running in combination with small runner rail cross selection Up to 550 N or 700 N carrying capacity For door thicknesses from 16mm-21mm and 21mm-27mm Folding and sliding door systems Mounting details Upper guiding horizontal (rail 6319.011) 64 80 64 99 (89) 40 60 48 25 8 24 Dimensions in parenthesis refer to the version for door thickness from 16mm to 21mm. 150 13 (10) 39 (29) 8 29 42 128 64 22 7 12 32 2 5 2 min. 120 62 75 32 11 17.5 30.5 63 Door overlap + min. 5mm 6.5 46.5 (36.5) 12 min. 20 Upper guiding vertical (rail 6326.011) 3 min.85 80 64 Catch pin has to be mounted in 80 accordance with the door projection 64 46,5 (56,5) 37 7 22 Dimensions in parenthesis refer to the version for door thickness from 21mm to 27mm. 60 22 42 15 150 128 64 min.85 22 19 (26) 10 (13) 7 19 (26) Ø8 29 32 12 min.120 62 75 32 2 2 11 17,5 5 30,5 63 Door overlap + min. 5mm 6,5 36,5 (46,5) 12 min.20 Solution with vertical guide rail requires different guide roller elements than those specified in the standard sets. 5.20
Sliding door systems S8 one For wooden doors Item number S8 one With straight roller element With offset roller element 6339.100.001 6339.100.002 Included in a set Roller element Carrying capacity 200N Straight 2 Roller element Carrying capacity 200N Offset, 16mm 2 Guide straight 2 other designs on request Guide Offset 2 Accessories as per order Runner and guide rail 6519.011.150 Made of plastic Length 5 m Please order fixing accessories separately > see page 4.27 Please contact your representative for ordering separate pieces 5.21
For single-track sliding doors Same runner and guide rails to be grooved Up to 200 N carrying capacity Straight and offset glider designs for inlay or overlay door applications Folding and sliding door systems Mounting details Straight design Offset design, 16mm 5.22
Sliding door systems S8 vedro For glass doors Item number S8 vedro Complete set for 1 door 6339.700.001 Included in a set Roller element height adjustable for glass bore Ø 10mm Carrying capacity 300N 4 Made of brass End stopper right / left use 2 Made of plastic Accessories as per order Runner and guide rail 6339.701.250 Length 5 m Other lengths and finishes on request Please order fixing accessories separately > see page 4.27 Please contact your representative for ordering separate pieces 5.23
Single-track glass sliding door Unobtrusive roller element with 24.8mm outer diameter For glass thickness from 4mm to 6mm Quality ball bearing roller Ø 19mm Up to 300 N carrying capacity Glass bores Ø10mm required Folding and sliding door systems Mounting details max. 600 mm max. 1mm max. 1mm min. 16mm Observe maximum warping of carcase under load 5.24
Sliding door systems S8 pro For aluminium frame doors Item number S8 PRO Complete set for 1 door 6339.200.001 Included in a set Roller element Carrying capacity 300N bottom left / top right 2 bottom right / top left 2 bottom right/ top left bottom left/ top right Made of steel End stopper for right/left use 2 Made of plastic Accessories as per order Runner and guide rail Length A Item number 5m 16 6339.101.250 5m 19 6339.201.250 Please order fixing accessories separately > see page 4.27 Please contact your representative for ordering separate pieces 5.25
For single-track sliding doors with aluminium frame Runner and guide rails are mounted on the front edge of the carcase without modification For different board thicknesses Quality ball bearing roller Ø19mm for excellent running performance Up to 300N carrying capacity Folding and sliding door systems Mounting details 19 M5x10 (DIN 7985) 7 33 8,5 3,5 19 17 10,2 10,9 14,5 max. 600 mm max. 1mm max. 1mm min. 16mm Observe maximum warping of carcase under load 5.26
Accessories for folding and sliding door systems Ø L Technical details Bore diameter Total length Item number Euro tallon drop screw 9.5 13 4302.002.001 4302.002.004 7,8 6,3 L 500 Pcs Euro countersunk head screw 4302.002.010 7,8 13 6,3 2000 Pcs Bush M6 10 13 2618.003.001 8 11 2618.003.020 2000 Pcs Made of plastic Bush M4 10 13 2619.003.004 8 8 2619.003.001 2000 Pcs Made of plastic Expansion bush M4 5 2625.002.006 1000 Pcs 5.27
L Folding and sliding door systems Total length Item number Countersunk head screw M4 6516.019.001 90 Ø 6.5 M4 2.05 8 500 Pcs Connecting socket M4 10.5 20 30 40 6319.026.001 6319.026.002 6319.026.003 6319.026.004 400 Pcs Screw for cover strip S1 M4 8 8240.026 1000 Pcs Tallow drop screw M4 24 8240.005 1000 Pcs 5.28