Communication Module CM l Instrumentation & Controls
The Architecture From Complete Overview to the Smallest Detail External Network OT OT OT OT/ET OT/DT OPC XU web-server Terminal bus OM ES DS Plant bus AP AP AP AP Auxiliary APF AG-F APT SIMATIC S5 / S7 CM IEC 60870 Modbus FUM FUM-F SIM-F Add FEM ET200M PROFIBUS-DP SIM ET200M Positioner M MCC DP/PA Link PROFIBUS-PA DP/AS-i Link AS-interface TELEPERM XP l Instrumentation & Controls 2/11
Connecting with 3rd Party PLC / DCS 3rd party PLC // DCS 3rd Party Computer Systems Externes Netzwerk OT OT OT OT/ET OT/DT OPC XU web-server Terminalbus Anlagenbu s OM ES DS AP AP AP AP CM NebenanlageS5 / S7 IEC 60870 SIMATIC APF AG-F APT Modbus FUM FUM-F SIM-F Add FEM ET200M PROFIBUS-DP SIM ET200M Stell- / Regelantrieb M SIMO CODE DP/PA Link PROFIBUS- PA DP/AS-i Link AS-interface World Standards Office Connection TELEPERM XP l Instrumentation & Controls 3/11
Connecting with 3rd Party PLC / DCS General Features CM Operating and Monitoring of 3rd party PLC/ DCS through Standard TELEPERM XP HMI, including Soft Controls 3rd party PLC/ DCS Alarming Logging Archiving Data Retrieval Integrated into the TXP Engineering System The Operator will not even notice, that there is a 3rd party PLC/DCS in the background TELEPERM XP l Instrumentation & Controls 4/11
Connecting with 3rd Party Systems Communication Modules - CM OT OT OT/ET Terminal bus TELEPERM M/ME Plant bus AP OM AP ES CM104 IEC 60870 Modbus CM104 IEC 60870 Modbus CS 275 SINEC H1 MODBUS* Data Highway IEC 60870* GE Mark V TCP/IP 3rd Party System *TELEPERM XP Standard TELEPERM XP l Instrumentation & Controls 5/11
Communication Module - CM General Features Data exchange between TXP and various sub-systems Conversion of sub-system data structure to TELEPERM XP data structure Operating and monitoring of sub-systems with TELEPERM XP OM650 Data exchange between sub-systems and TELEPERM XP - automation-systems High availability achieved with hot standby Integrated in TELEPERM XP engineering Flexible and scalable solution TELEPERM XP l Instrumentation & Controls 6/11
Communication Module - CM Engineering Features with ES 680 CM engineering functionality provided by ES680 Limited function and logic blocks Signal assignment to sub- systems Generation of LAN data Code Code generation Offline loading of engineering data Online loading of engineering data (depending on subsystem protocol) Fast parameter changes Dynamic function charts on ES680 and OM650 TELEPERM XP l Instrumentation & Controls 7/11
Connecting with 3rd party PLC / DCS References CM Realized physical connections Protocol Experience (1) Protocol Experience (2) Ethernet RS 232, 422, 482 Modem Modbus RTU Modbus + TCP/IP IEC870 Data Highway + 3964 (R) Westinghouse TIWAY Texas Instruments DIN 19244 CS 275 STF SIMATIC H1 Every PLC / DCS is in principle connectable TELEPERM XP l Instrumentation & Controls 8/11
Communication Module - CM Connected Systems Connected Systems CM 388/ 488 Connected Systems CP 581 (predecessor) Allen Bradley GE Mark IV, V Bentley Nevada Modicon Fisher Rosemount DCS ABB August (fire & gas) Woodward CITECH SCADA Sinaut LSX Siemens Gas Analyser ABB Procontrol ABB Advant ALSTOM CEG,IDS Switchgear) Baily Infi 90 Westinghouse WDPF Noell AS220E,EA AG95,135 Honeywell Babcock Cegelec Mitsubishi Hartmann & Braun Conitel Siemens SINAUT LSA Telegyr (Switchgear) TELEPERM XP l Instrumentation & Controls 9/11
Communication Module - CM Hard- and Software Features CM104 Hardware Features Software Features Scalable in performance and I/O amounts (500 to 5000 tags) Various physical connections (RS232, RS..., Ethernet, Modem,...) Single and redundant connection of 3rd party PLC/DCS to TELEPERM XP Integrated in ES680 Engineering Vertical and horizontal communication Redundant communication to TXP components (PU, AP) Seamless redundancy switch over Processing of function blocks comparable to AP function blocks (limited function block set) Processing of logic blocks (limited logic block set) Transfer of time tagged signals, or on board time tagging TELEPERM XP l Instrumentation & Controls 10/11
Communication Module - CM References - Connected Systems Various 3rd Part Systems with a wide range of functionality (PC, PLC, DCS) > 300 CM 388/488 components worldwide transferring approximately > 40,000 signals from and to TELEPERM XP > 200 couplings with CP 581 technology with approximately another > 70,000 signals processed by TELEPERM XP Integrated,Controlled and Monitored by TELEPERM XP TELEPERM XP l Instrumentation & Controls 11/11