Häfele Classic Drawer System

Häfele Classic Drawer System

Smooth and Effortless Reinforcing these concepts, Häfele s Classic drawers offer an affordable solution coupled with quietness, smoothness and ease. The opening action of the Classic drawer is supremely comfortable, thanks to proven knowledge behind this soft-closing technology. Leaving you in no doubt of its quality. Integrated Soft-Close System With over 10 years of effort in the continuous advancement of the technology, the integrated Soft-Close System is proudly applied in these drawer slides and metal drawers. The high performance and reliable design of the Soft-Close Systems forms the crucial skeleton of the perfect motion as well as delivering a pleasant and comfortable experience to the user.

HäfeleClassic Drawer System Adjustment Load capacity: Material : Finish: Version: Adjustment: Mounting: 35 kg Steel drawers Powder coated, white Full extension, with integrated soft-close Front: 2 dimensional, also tilt for drawer front adjustment with railing system Snap fixing onto drawer sides in system 32mm. Tolerance adjustment ± horizontally 1 mm, vertically 2 mm Drawer insertion and removal Mounting 3

HäfeleClassic Drawer System Drawer Side Set 86 mm Includes: 86 mm White drawers and side cover caps Runners, front fixing and white cover cap 300 552.66.711 350 552.66.712 400 552.66.713 450 552.66.714 500 552.66.715 550 552.66.716 Mounting Drilling dimensions for cabinet Drilling dimensions for drawer front Drilling dimensions for drawer runner Drilling dimensions for front Drilling dimensions for back Drawer base and back cutting dim. Pg 10 Accessories Pg 11-12 4

HäfeleClassic Drawer System Drawer Side Set 140 mm Includes: 140 mm White drawers and side cover caps Runners, gallery rails, front fixing and white cover cap 300 552.68.711 350 552.68.712 400 552.68.713 450 552.68.714 500 552.68.715 550 552.68.716 Mounting Drilling dimensions for cabinet Drilling dimensions for drawer front Drilling dimensions for drawer runner Drilling dimensions for front Drilling dimensions for back Drawer base and back cutting dim. Pg 10 Accessories Pg 11-12 5

HäfeleClassic Drawer System Drawer Side Set 164 mm Includes: 164 mm White drawers and side cover caps Runners, gallery rails, front fixing, white cover cap 300 552.63.711 350 552.63.712 400 552.63.713 450 552.63.714 500 552.63.715 550 552.63.716 Acrylic hanging panel Mounting Suitable: White translucent 164 mm drawer sets Drilling dimensions for cabinet Drilling dimensions for drawer front Drilling dimensions for drawer runner Drilling dimensions for front Drilling dimensions for back 350 552.69.432 400 552.69.433 450 552.69.434 500 552.69.435 550 552.69.436 Metal hanging panel Suitable: White, powder coated, steel 164 mm drawer sets 350 552.69.752 400 552.69.753 450 552.69.754 500 552.69.755 550 552.69.756 Drawer base and back cutting dim. Pg 10 Accessories Pg 11-12 6

HäfeleClassic Drawer System Drawer Side Set 204 mm Includes: 204 mm White drawers and side cover caps Runners, front fixing,white cover cap 300 552.64.711 350 552.64.712 400 552.64.713 450 552.64.714 500 552.64.715 550 552.64.716 Metal hanging panel Mounting Suitable: White, powder coated, steel 204 mm drawer sets min. 225 220 37 ± 0.5 Drilling dimensions for drawer front min. 56 Drilling dimensions for cabinet 10 min. 54 32 68 64 10 Drilling dimensions for drawer runner 37 ± 0.5 32 32 64 32 9 11 min. 54 32 19.5 Drilling dimensions for front Drilling dimensions for back 350 552.69.762 400 552.69.763 450 552.69.764 500 552.69.765 550 552.69.766 Drawer base and back cutting dim. Pg 10 Accessories Pg 11-12 7

HäfeleClassic Drawer System Inner Drawers 86 mm Drawer sets 86 mm Includes: 86 mm White drawers and side cover caps Runners, front fixing and white cover cap 300 552.66.711 350 552.66.712 400 552.66.713 450 552.66.714 500 552.66.715 550 552.66.716 Inner drawer components 86 mm Mounting 86 mm White Front panel 1074 mm 552.69.780 Packing: 1 piece Front panel connectors Drilling dimensions for cabinet Drilling dimensions for front Assembly Disassemble drawer front Drilling dimensions for drawer runner Packing: 1 pair 86 mm Silver Drawer base and back cutting dim. Pg 10 Accessories Pg 11-12 552.69.790 8

HäfeleClassic Drawer System Inner Drawers 204 mm Drawer sets 204 mm Includes: 204 mm White drawers and side cover caps Runners, front fixing and white cover cap 300 552.64.711 350 552.64.712 400 552.64.713 450 552.64.714 500 552.64.715 550 552.64.716 Inner drawer components 204 mm Mounting 204 mm White Front panel 1074 mm 552.69.785 Packing: 1 piece Front panel connectors Drilling dimensions for cabinet Drilling dimensions for front Assembly Drilling dimensions for drawer front Drilling dimensions for back Adjustment Drilling dimensions for drawer runner Packing: 1 pair 204 mm Silver Inner front handle Packing: 1 piece Grey Drawer base and back cutting dim. Pg 10 Accessories Pg 11-12 552.69.791 552.69.799 9

HäfeleClassic Drawer System Technical Information Cutting dimensions drawer set 86 mm Bottom panel width=lw-74+0.5 Bottom panel length=runner length-5mm Runner drilling dimensions standard and inner drawers Bottom panel height=70mm Back panel length=lw-88+0.5 16 mm thickness material LW: Internal cabinet width Cutting dimensions drawer set 140 mm Bottom panel width=lw-74+0.5 Bottom panel length=runner length-5mm Bottom panel height=124mm Back panel length=lw-88+0.5 Cutting dimensions drawer set 164 mm Cutting dimensions drawer set 204 mm 16 mm thickness material LW: Internal cabinet width Bottom panel width=lw-74+0.5 Bottom panel length=runner length-5mm Bottom panel height=148mm Back panel length=lw-88+0.5 16 mm thickness material LW: Internal cabinet width Bottom panel width=lw-74+0.5 Bottom panel length=runner length-5mm Bottom panel height=188mm Back panel length=lw-88+0.5 16 mm thickness material LW: Internal cabinet width 10

HäfeleClassic Drawer System Cutlery Trays Beech timber inserts Insert for five jars Packing: 1 piece 553.63.391 Knife block Packing: 1 piece 553.63.390 Cutting board Cutlery tray, vacuum formed plastic Packing: 1 piece 553.63.392 For drawer depths: Material thickness: 500 mm nominal length 50 mm 2.5 mm (original material) Tray type For carcase width mm silver textured white textured A 300 556.62.121 556.62.621 B 350 556.62.122 556.62.622 C 400 556.62.123 556.62.623 D 450 556.62.124 556.62.624 E 500 556.62.125 556.62.625 F 600 556.62.127 556.62.627 G 700 556.62.128 556.62.628 H 800 556.62.129 556.62.629 I 900 556.62.130 556.62.630 440-490 440-490 200-240 250-290 300-340 350-390 400-440 500-540 A B C D E F 600-640 700-740 800-840 G H I 11

HäfeleClassic Drawer System Utensil inserts, vacuum formed plastic Cutlery Trays Spice inserts, vacuum formed plastic For drawer depths: Height: Material thickness: Finish: 500 mm nominal length 57 mm 2.5 mm (original material) White grained or silver grained Tray type For carcase width mm silver white A B C D 450 500 600 700 556.62.583 556.62.584 556.62.586 556.62.588 556.65.748 556.65.757 556.65.766 556.62.888 Tray type For carcase width mm silver textured white textured A B C D E F G H 400 450 500 600 700 800 900 1200 556.63.552 556.63.553 556.63.554 556.63.556 556.63.562 556.63.557 556.63.558 556.63.560 556.63.752 556.63.753 556.63.754 556.63.756 556.63.762 556.63.757 556.63.758 556.63.760 F 700-740 12 400-440 350-390 G 700-840 D 440-490 C 440-490 B E 500-640 500-540 440-490 440-490 300-340 440-490 A 440-490 440-490 440-490 H 1100-1140 For drawer depths: 500 mm nominal length 50 mm Material thickness: 2.5 mm (original material)

HäfeleMetalla-E Hinges Damper Hinge for Concealed Fixing Material: Steel Nickel plated Features: With integrated damper into hinge arm Adjusting facility: Depth: -1 - +3 mm Height: -2 - +2 mm Lateral: +2 mm For door thickness: 14-26 mm Opening angle: 110º- Full overlay mounting 48/6 11 Hinge arm: Full overlay crank = 0 mm 65 20 Cup dimensions 38 3 Packing: 200 pieces 311.60.525 62 Door overlay mm 16 17 18 19 20 21 22 23 3 4 5 6 0 3 4 5 6 2 3 4 5 6 4 Distance to cup mm Mounting plate distance mm Drilling dimensions for cup fixing, screw fixing 11 Half overlay mounting 48/6 11 65 26 Drilling pattern 48/6 Hinge arm: Half overlay crank = 7 mm Mounting plate with eccentric cam adjustment Version: For screw fixing via varianta screws, with 5 mm drill holes. System 32 drilling Packing: 200 pieces (Includes Euro screws for fixing) H = 0 311.71.560 H = 2 311.71.562 H = 4 311.71.564 Packing: 200 pieces 311.60.526 Door overlay mm 9 10 11 12 13 14 15 16 3 4 5 6 0 3 4 5 6 2 3 4 5 6 4 Distance to cup mm Mounting plate distance mm Inset mounting 48/6 Hinge arm: Packing: 200 pieces 11 Inset crank = 16 mm 311.60.527 Door overlay mm -3-2 -1 0 1 2 3 4 6 5 4 3 0 6 5 4 3 2 6 5 4 3 4 Distance to cup mm Mounting plate distance mm 65 35 13

Notes and Measurements

Notes and Measurements

Häfele Showrooms Häfele (N.Z. Head Office) Limited Eastern Design Centre 16 Accent Drive East Tamaki Auckland P (09) 274 2040 F (09) 274 2041 info@hafele.co.nz Auckland Design Centre 20 Beaumont Street St Mary s Bay Auckland P (09) 274 2530 F (09) 274 2531 architectural@hafele.co.nz Wellington Design Centre The Wool Store Level 1 262 Thorndon Quay Wellington P (04) 472 0294 F (04) 472 0295 wellington@hafele.co.nz Christchurch Design Centre 5 Wigram Close Sockburn Christchurch P (03) 343 8200 F (03) 343 8201 christchurch@hafele.co.nz freephone 0800 4 HAFELE This catalogue is for the use of the recipient only. It remains in all respects the property of Häfele. Reproduction of this brochure in whole or in part, or the reproduction of the illustrations as well as the copying of the layout, is strictly prohibited. All measurements given in this publication are not binding. Rights for design improvements reserved. No responsibility for typographical or other errors occurring in the catalogue production. All deliveries made corresponding to Häfele sales conditions. January 2012. Copyright by Häfele. All rights reserved. Printed in New Zealand.