Spare parts list CP 1210 CP 1210 S CP 1210 SVR Paving breaker www.cp.com
2006-10 No. Copyright Chicago Pneumatic Construction Tools STOCKHOLM SWEDEN
CP 1210 CP 1210 S CP 1210 SVR Spare parts list Introduction Welcome! Protect your investment in the world s finest air tools. Use genuine CP replacement parts. The purchase of replacement parts for your CP tools deserves the same good judgment that resulted in the purchase of the tools themselves. Each genuine CP part is made from carefully selected and inspected material, subjected to sophisticated machinery and finishing processes and heat-treated to produce just the right combination of hardness, ductility and impact resistance for its intended use. Each part is identical to, and made concurrently with, parts used in production tools. The use of parts other than genuine CP replacement parts can lead to substandard performance, early failure, possible damage of other parts and, in some instances, unsafe conditions. Use only authorized parts. Any damage or malfunction caused by unauthorized parts will not be covered by Warranty or Product Liability. Any machine modification not approved by Chicago Pneumatics may result in serious injuries to yourself or others. To reduce the risk of injury, read and understand the relevant safety and operating instructions before operating the machine. Before undertaking any maintenance or changing the working tool on pneumatic machines, always switch off the air supply and bleed the machine by depressing the start and stop device. Then disconnect the air hose from the machine. CP 1210 is designed for medium to heavy demolition of materials such as concrete, asphalt and brickwork. It is designed for vertical use. No other use is permitted. 3
Spare parts list CP 1210 CP 1210 S CP 1210 SVR CP 1210 SVR 56 57 CP 1210 CP 1210 S 10 1 2 59 58 9 3 13 56 5 4 5 61 60 11 12 13 14 15 16 17 18 19 16 20 21 32 33 34 35 23 24 25 22 6 26 27 28 29 30 35 36 37 38 7 31 8 9 53 10 54 55 51 52 50 39 50 49 48 40 41 39 40 41 46 47 42 43 44 45
CP 1210 CP 1210 S CP 1210 SVR Spare parts list No. Description Shank size Quantity Ordering No. 1210 1210 S 1210 SVR 1 Socket head cap screw (M8) - - 4 0211 1327 00 2 Washer - top cover - - 4 0301 2335 00 3 Top cover - - 1 3303 0050 19 4 Buffer pad assembly - - 1 3303 0050 26 5 Spring - handle - - 2 3303 0050 25 6 Backhead (vibration reduced) - - 1 3303 0050 15 7 Pin - lever - - 1 R145 866 8 Lever - throttle - - 1 3303 0050 21 9 Handle - - 2 3303 0050 17 10 Grip - - 2 3303 0050 22 11 Socket head cap screw (M12 x 1.75) 4 4 4 0211 1407 00 12 Roll pin (16 DIA x 65 L) - - 1 0108 1535 00 13 Self tapping screw 2 2 2 P081 333 14 Data plate - - 1 *) 15 Gasket 1 1 1 3303 0050 31 16 O-ring 2 2 2 C102 642 17 Upper valve lid 1 1 1 R138 096 18 Valve 1 1 1 R138 094 19 Valve case 1 1 1 R138 095 20 Lower valve case lid 1 1 1 3303 0050 24 21 O-ring 1 1 1 H031 0447 22 Seal - cylinder 1 1 1 R110 215 (23 25) Throttle valve complete 1 1 1 3303 0050 36 23 Throttle valve 1 1 1 *) 24 Seal - throttle valve 1 1 1 R098 368 25 Ring - valve seal retaining 1 1 1 R098 369 26 Spring - throttle valve 1 1 1 R005 717 27 O-ring 1 1 1 R056 605 28 Nut - air inlet swivel 1 1 1 3303 0050 13 29 Lock washer - swivel 1 1 1 3310 1059 00 30 O-ring - swivel 1 1 1 0663 2126 00 31 Swivel - air inlet 1 1 1 3303 0050 12 *) Not delivered separately
Spare parts list CP 1210 CP 1210 S CP 1210 SVR CP 1210 SVR 56 57 CP 1210 CP 1210 S 10 1 2 59 58 9 3 13 56 5 4 5 61 60 11 12 13 14 15 16 17 18 19 16 20 21 32 33 34 35 23 24 25 22 6 26 27 28 29 30 35 36 37 38 7 31 8 9 53 10 54 55 51 52 50 39 50 49 48 40 41 39 40 41 46 47 42 43 44 45 6
CP 1210 CP 1210 S CP 1210 SVR Spare parts list No. Description Shank size Quantity Ordering No. 1210 1210 S 1210 SVR 32 Nut (M12) 4 4 4 3303 0050 30 33 Cylinder 1 1 1 3303 0050 29 34 Piston 1 1 1 R110 212 35 Bolt - fronthead 2 2 2 R110 217 36 Bushing - anvil block 1 (25 mm) US, 1 (25 mm) ISO 1 1 1 R110 203 36 Bushing - anvil block 1⅛ (28 mm), 1¼ (32 mm) - 1 1 3303 0050 05 37 Block - anvil 1 (25 mm) US, 1 (25 mm) ISO 1 1 1 R085 427 37 Block - anvil 1⅛ (28 mm), 1¼ (32 mm) - 1 1 3303 0050 06 38 Fronthead for CP 1210, CP 1210 S, CP 1210 SVR 1 (25 mm) US 1 1 1 F815 478 38 Fronthead for CP 1210, CP 1210 S, CP 1210 SVR 1 (25 mm) ISO 1 1 1 F814 719 38 Fronthead for CP 1210 S, CP 1210 SVR 1¼ (32 mm) - 1 1 3303 0050 02 38 Fronthead for CP 1210 S, CP 1210 SVR 1⅛ (28 mm) - 1 1 3303 0050 03 39 Spring - steel 1 (25 mm) US, 1 (25 mm) ISO 2 2 2 R093 698 39 Spring - polyurethane 1⅛ (28 mm), 1¼ (32 mm) - 2 2 3303 0050 33 40 Lock - fronthead nut 2 2 2 R041 073 41 Nut - fronthead bolt 2 2 2 R110 218 42 Roll pin (16 DIA x 55 L) 1 1 1 0108 1103 04 43 Roll pin (10 DIA x 55 L) 1 1 1 0108 1395 00 44 Spring - plunger 1 1 1 R086 982 45 Plunger - latch 1 1 1 R092 497 46 Retainer latch bush 1 1 1 R048 540 47 Retainer - latch 1 1 1 R092 493 (48 55) Silencer complete - 1 1 3303 0050 42 48 Silencer - 1 1 *) 49 Socket head cap screw (M6 x 1-45L) - 8 8 0211 1253 00 50 Washer - 16 16 F826 979 51 O-ring - silencer (Bottom) - 1 1 0663 2146 00 52 Nyloc nut (M6 x 1) - 8 8 0291 1128 15 53 Sealing pad - silencer (Left) - 1 1 3303 0050 10 54 O-ring - silencer (Top) - 1 1 0663 2143 00 55 Sealing pad - silencer (Right) - 1 1 3303 0050 11 56 Rubber grip 2 2 - F816 345 57 Lever 1 1 - F814 725 58 Backhead 1 1-3303 0050 00 59 Roll pin 2 2 - R133 433 60 Throttle valve 1 1 - F882 246 61 Data plate 1 1 - *) *) Not delivered separately 7
2006-10 No. Copyright Chicago Pneumatic Construction Tools STOCKHOLM SWEDEN