Brochure More information from http://www.researchandmarkets.com/reports/1930834/ Application of Diamond and Related Materials Description: Series: Solid State Phenomena, Volume 175 Selected, peer reviewed papers from the 4th Conference on Application of Diamond and Related Materials in China (CADRM2010) and the 1st International Symposium on Advances in Brazed Superabrasive Tools (ISABS2010), August 19-23, 2010, Xiamen, China This volume presents 70 papers selected from over 100 papers submitted by university and industrial researchers. All of the papers were peer-reviewed by carefully chosen experts. This volume provides readers with a broad overview of recent advances in the field of the application of diamond and related materials, as well as brazing super-abrasives. Contents: Table of Contents (70 papers, 10 per page listed) Microstructure and Properties of the Sintered Diamond Reinforced by Diamond-MWCNTs Composite Fibers Fu Ming Deng, Xue Jun Lu, Rui Ping Liu, Guo Jun Xu, Qi Wu Chen, Wen Zhu Li p1 Influence of Zinc Particles on Oxidation Resistance of Diamond/Borosilicate Glass Composites Yan Hui Wang, Xiang Hong Zhang, Jian Bing Zang, Xiao Zhe Cheng, Jin Hui Zhang p8 A Method to Investigate Stability of Silicon Coating on Diamond Substrate by First Principle Calculation Dong Xu Li, Jing Lu, Dong Li Yu p13 Coating SiC Whiskers with Protective Si Films for Al Matrix Composite Jing Lu, Yan Hui Wang, Xi Peng Xu p17 Thermal Damage of Diamond Grits during the Brazing Process with Ni-Cr Alloy Yan Chen, Jiu Hua Xu, Yu Can Fu, Hong Hua Su p22 CFRP Drilling with Brazed Diamond Core Drill Juan Mu, Jiu Hua Xu, Yan Chen, Yu Can Fu p27 Fracture Morphology of Composite CBN Wheel Segments Based on Graphite Self-Lubricating Effects Zhen Zhen Chen, Jiu Hua Xu, Wen Feng Ding, Jia Lin Huang p33 Measurement of Forces in Shearing Brazed Diamonds Zhen Fa Su, Guo Qin Huang, Hui Huang, Hua Guo, Xi Peng Xu p38 A Comparative Study: Tool Life and Wear of Thin-Walled Monolayer Brazed Diamond Core Drill Fabricated with Ni-Cr and Ag-Cu-Ti Alloy Hong Hua Su, Yu Can Fu, Yan Chen, Jiu Hua Xu, Wen Feng Ding p42 Effect of Arraying Patterns of Diamond Grits on the Wear of the Mono-Layer Brazed Diamond Tool Yu Mei Zhou, Feng Lin Zhang, Meng Jia He, Hui Ping Huang p47 Slot Grinding of Advanced Ceramics with Brazed Diamond Cut-Off Wheels Mei Chen, Feng Zhang, Jian Yun Shen, Hua Guo, Xi Peng Xu p52 Energy and Material Removal Mechanisms for the Grinding of Cemented Carbide with Brazed Diamond Wheels You Ji Zhan, Yuan Li, Hui Huang, Xi Peng Xu p58 Analysis of Energy Consumption Efficiency in Diamond Circular Sawing Guo Qin Huang, Xi Peng Xu p67
Analysis of Grit Cut Depth in Fixed-Abrasive Diamond Wire Saw Slicing Single Crystal Silicon Yu Fei Gao, Pei Qi Ge p72 Research on the Mechanical Properties of CaF2 Crystal for Ultra-Precision Machining Ming Jun Chen, Wen Bin Jiang, Jian Cheng, Xin Chu p77 Raman Analysis of the Silicon Wafer Scratched by Single Point Diamond Zhuo Chen, Xin Wei, Xiao Zhu Xie, Qing Lei Ren p82 Material Removal Distribution of Chemical Mechanical Polishing by the Bionic Polishing Pad with Phyllotactic Pattern Yu Shan Lu, Jun Wang, Nan Li, Tian Zhang, Min Duan, Xue Ling Xing p87 The Effects of the Geometric Parameters of Segmented Sawblades on the Fluctuated Temperatures in Sawing Cong Fu Fang, Hui Huang, Xi Peng Xu p93 The Study of Vibration Effects on Precision Grinding Surface Quality Guo Bi, Yin Biao Guo p97 Analysis of Effecting Factors on Surface Finish of Fused Silica Glass Grinding with Inclined Ball-Headed Diamond Wheel Ming Jun Chen, Ziang Li, Kang Jun Luo, Ying Chun Liang, Zhen Fang, Bo Yu p102 Experimental Study on Damage Mechanism of Nano-Ceramic Surface/Subsurface under Ultrasonic Vibration Aided Grinding Bo Zhao, Chong Yang Zhao, Bao Yu Du p107 Study on Subsurface Damage after Fixed-Abrasive Lapping with Different Particle Size Ping Gao, Jun Li, Yong Wei Zhu, Biao Li, Yan Zhang, Ji Long Fan, Yu Li Sun, Bi Liang Jiang, Dun Wen Zuo p112 A Research on the SiCp Reinforcing Cu-Base Composite Material's Cutting Performance Yi Ping Zhang, Yi Yi Tao, Zuo Jiang p116 An Adaptive Tool Path Generation for Large Scale Wedge/Aspheric Lens Element Grinding Based on Isophote Interpolation Ning Ning Zhang, Chen Jiang, Zhen Zhong Wang, Yin Biao Guo p121 Research on CBN Grinding Wheel Dressing with Ultrasonic Vibration Assistance and its Grinding Performance Guo Fu Gao, Bo Zhao, Yu Li, Jing Lin Tong p126 Experiment Study on ELID Grinding of TN85 Cermets Fu Qiang Tong, Fei Hu Zhang, Dian Rong Luan p131 Study on Friction and Wear Properties of Self-Lubricating Impregnated Diamond Bit Cutters Bing Suo Pan, Xiao Hong Fang, Ming Yuan Niu p136 A Polishing Method of Single-Incentive Ultrasonic Elliptical Vibration for Tungsten Carbide Mould Shao Hui Yin, Zhi Qiang Xu, Jian Wu Yu, Ze Biao Wang p140 Inclined Axis Ultra-Precision Grinding for Spherical Surface Shao Hui Yin, Jing Wang, Feng Jun Chen, Jian Wu Yu, Yu Wang, Qing Liang Zhao, Hong Liang Li p145 A Comparative Study on Ultrasonic Machining of Red Granite Shu You Zheng, Xi Peng Xu p150 Productivity of EDM Process Assisted by Ultrasonic Waves Jian Wu Yu, Lucjan Dabrowski, Shao Hui Yin, Zbigniew Lechniak p157 Sawing Characteristics of a Diamond Circular Blade with Grits in Ordered Distribution Guo Qin Huang, Xi Peng Xu p161
Experiment and Simulation on Residual Stress of Surface Hardened Layer in Grind-Hardening Lei Zhang, Pei Qi Ge, Wen Bo Bi, Qian Zhang p166 Flow Dynamic Simulation of Micro Abrasive Water Jet Jing Ming Fan, Chang Ming Fan, Jun Wang p171 The Designing and Wear Simulation of the Wheel Used in Super-High Speed Point Grinding Ya Dong Gong, Yue Ming Liu, Ting Chao Han, Jun Cheng p177 Radial Power Ultrasonic Vibration Honing Friction Analysis X.J. Zhu, Jian Qing Wang, Quan Cheng, Yan Wang p183 Experiment on Non-Uniformity of Material Removal on Wafer Surface in Wafer CMP Jian Xiu Su, Jia Xi Du, Xi Qu Chen, Xin Ning, Ren Ke Kang p187 Synthesis and Numerical Analysis on Velocity and Pressure Field of Convex Diamond Film Duo Sheng Li, Xian Liang Zhou, Dun Wen Zuo, Xiao Zhen Hua p192 Mathematical Model of Unbalanced Response of Spindle System of Ultra-High Speed Grinder Chang He Li, Chao Du, Yu Cheng Ding p196 Effects on the Bending Strength of Metal-Bonded Diamond Segments in DEM Simulation Xiu Yu Chen, Yi Qing Yu, Xi Peng Xu p201 The Dynamics Modeling and Simulation of Spindle System of Ultra-High Speed Grinding Machine Tool Ya Li Hou, Chang He Li p206 3D Finite Element Analysis of Pile-up Formation in Abrasive Machining at Low Speed Wei Yu, Qiang Feng, Cheng Zu Ren p211 An Accurate Method for Calculating the Contact Subsurface Stress Field of Hybrid Ceramic Ball Bearing Cheng Wang, Wei Yu, Cheng Zu Ren p215 CVD Diamond Films as Wear-Resistant Coatings for Relief Valve Components in the Coal Liquefaction Equipment Xin Chang Wang, Bin Shen, Fang Hong Sun p219 Microstructural Property of Silicon Thin Films Deposited on Nanodiamonds Related to QALD Growth Condition Jing Lu, Yan Hui Wang p226 Fabrication and Applications of Ultra-Smooth Composite Diamond Coated WC-Co Drawing Dies Bin Shen, Fang Hong Sun, Zhi Ming Zhang, He Sheng Shen, Song Shou Guo p233 Study on Fabrication and Cutting Performance of CVD Diamond Coated Drills in Machining the Carbon Fiber Reinforced Plastics Jian Guo Zhang, Bin Shen, Fang Hong Sun p239 Diamond Films Synthesis with a DC Arc Plasma Jet: Effect of Substrate Temperature on Quality of Diamond Films Rong Fa Chen, Liang Gang Dai, Rui Zhu, Xian Liang Zhang, Tao Liu, Yi Pan, Dun Weng Zuo p245 A Spraying Method for Development of Diamond Wire Saw Chun Yan Yao, Jin Sheng Wang, Wei Peng p249 Study on Characterization of Cationic Polyelectrolyte Modified Benzoguanamine Formaldehyde/Silica Composite Abrasives Slurry Xue Feng Xu, Bin Shan Zhao, Yu Zhi Yang, Quan Guo, Wei Peng p254 The Study of Electrochemical Polishing HVOF Spraying Coating Wei Hua Li, Yong Jun Zhang, Xiao Zhong Song p259 Hardness Improvement of Welded Joint by Laser Weld Technology
Gui Jie Liu, Xin Wang, An Jin Li p263 Adiabatic Shear Behavior and Chip Morphology in Precision Hard Cutting GCr15 Steel Guang Jun Chen, Xian Li Liu, Zhong Yang Zhao, Sheng Yuan Ji, Ke Qiang Li p269 Predicting Surface White Layer in Precision Hard Turning Tao Chen, Ming Jun Zhang, Xian Li Liu p274 Influence of Cutting Parameters on Characteristics of Serrated Chip when High-Efficiency Cutting Ti6Al4V Shu Cai Yang, Min Li Zheng, De Qiang Zhang, Ning Liu, Yi Hang Fan p278 Study on Effects of Cutter Radial Runout and Deformation on Cutting Force in Ball-End Hard Milling Xing Fa Zhao, Xian Li Liu, Fei Xiao, Yan Xin Wang, Yan Cui Jiang p284 Effects of Cutting Parameters on the Surface Roughness of Ti6Al4V Titanium Alloys in Side Milling Hao Liu, Chong Hu Wu, Rong De Chen p289 Development Evaluation of Mechanical Properties of Brazed Diamond Wire Yong Peng Li, Hui Huang, Xi Peng Xu p294 Experiment Study on Impact Disrepair of Different Groove Milling Inserts for Machining High-Strength Steel Yao Nan Cheng, Xian Li Liu, Fu Gang Yan, Yu Fu Li, Zhen Jia Li p300 Research on the Fracture and Breakage of Heavy-Duty Turning Tool for Rough Machining Hydrogenated Cylindrical Shell Geng Huang He, Xian Li Liu, Fu Gang Yan, Yuan Sheng Zhai, Zhong Yang Zhao p305 Research on the Edge Design Precision PCD Thread Milling Tool Xiao Hu Zheng, Guo Qiang Guo, Jun Li Li, Ming Chen p311 Experimental Study on the Cutting Performance of Cemented Carbide Rods Made by New Process Gao Chao Wu p316 PCD Reamer for Machining Cylinder Head Yong Guo Wang, Xiao Guang Chen, Gang Liu p321 Wear of Milling Cutters in Machining of TC4 (Ti6Al4V) Titanium Alloys Jun Yi Lai, Ling Xiang Li, Chong Hu Wu p326 A Numerical Model to Determine Temperature Distribution in Aluminum Alloy (2A12) Micro-Cutting Tao Guo, Guang Chen, Cheng Zu Ren p330 A Mathematical Modeling Method for Capillary Limit of Micro Heat Pipe with Sintered Wick Xi Bing Li, Chang Long Yang, Gong Di Xu, Wen Yuan, Shi Gang Wang p335 Study on Prediction Models of Milling Force for T10 Hardened Steel Jing Quan Wu, Guang Hui Li, Can Liu, Guang Yu Tan p342 Genetic Algorithm-Based Optimization of the Thin-Walled Tube of High Strength Aluminum Alloy in Diamond Turning Process Bao Xing Zhang, Bin Lin, Zhi Lin Han, Lei Zhang p347 Finite Element Simulation of Nickel-Based Alloy Cutting Process Based on DEFORM- 3D Jia Long Ren, Chun Yan Zhang, De Peng Yuan p352 Study on Speed and Acceleration Characteristics of 100 nm Scale Motion Platform Driven by Linear Servo Motors Guang Hui Li, Peng Wu, Xiao Long Ni, Wen Fang Peng, Guang Yu Tan p357 Ordering: Order Online - http://www.researchandmarkets.com/reports/1930834/
Order by Fax - using the form below Order by Post - print the order form below and send to Research and Markets, Guinness Centre, Taylors Lane, Dublin 8, Ireland.
Page 1 of 2 Fax Order Form To place an order via fax simply print this form, fill in the information below and fax the completed form to 646-607-1907 (from USA) or +353-1-481-1716 (from Rest of World). If you have any questions please visit http://www.researchandmarkets.com/contact/ Order Information Please verify that the product information is correct and select the format(s) you require. Product Name: Web Address: Office Code: Application of Diamond and Related Materials http://www.researchandmarkets.com/reports/1930834/ SC Product Formats Please select the product formats and quantity you require: Hard Copy (Paper back): CD-ROM: Quantity USD 131 + USD 27 Shipping/Handling USD 131 + USD 27 Shipping/Handling * Shipping/Handling is only charged once per order. * The price quoted above is only valid for 30 days. Please submit your order within that time frame to avail of this price as all prices are subject to change. Contact Information Please enter all the information below in BLOCK CAPITALS Title: Mr Mrs Dr Miss Ms Prof First Name: Last Name: Email Address: * Job Title: Organisation: Address: City: Postal / Zip Code: Country: Phone Number: Fax Number: * Please refrain from using free email accounts when ordering (e.g. Yahoo, Hotmail, AOL)
Page 2 of 2 Payment Information Please indicate the payment method you would like to use by selecting the appropriate box. Pay by credit card: You will receive an email with a link to a secure webpage to enter your credit card details. Pay by check: Please post the check, accompanied by this form, to: Research and Markets, Guinness Center, Taylors Lane, Dublin 8, Ireland. Pay by wire transfer: Please transfer funds to: Account number 833 130 83 Sort code 98-53-30 Swift code IBAN number Bank Address ULSBIE2D IE78ULSB98533083313083 Ulster Bank, 27-35 Main Street, Blackrock, Co. Dublin, Ireland. If you have a Marketing Code please enter it below: Marketing Code: Please note that by ordering from Research and Markets you are agreeing to our Terms and Conditions at http://www.researchandmarkets.com/info/terms.asp Please fax this form to: (646) 607-1907 or (646) 964-6609 - From USA +353-1-481-1716 or +353-1-653-1571 - From Rest of World