Typical Applications Filter Performance Test Time Domain Measurement Radar Communication Systematic Performance Test RFID Domain Test Bluetooth Domain Test Components Test and whole set equipment Test Key Features 7 - inch High Brightness Color TFT LCD Cable and Antenna Test ( Return Loss, Fault Position etc.) Network Analysis, S Parameter (S11, S12, S21, S22) test Spectrum Analysis, Analyzing Spectrum (field intensity, channel power, occupied bandwidth etc.) Power Supervision, For Power Measurement Vector Voltage Measurement, Measuring vector voltage USB Power Measurement, measuring power by connecting USB interface) Provide an external input bias T function, provide 2 types of USB2.0 interface, and a 100M network interface S5103 Handheld Microwave Tester can test frequency from 1MHz to 20GHz and has multiple functions including Cable and antenna SWR test, fault location test of discontinuous points, insertion loss and gain test, spectrum analysis and power test and so forth.
Portable, flexible and chargeable, S5103 Handheld Microwave Tester is suitable for spot test. This tester can be universally used in the various procedures including spot installation and debugging, performance test, daily maintenance and lash-up maintenance test of electronic devices including radar, communication, electromagnetic countermeasure, which will effectively improve users spot maintenance capability. Features To Boost Your Efficiency High-Performance Antenna Test 1MHz - 20GHz, frequency resolution 10Hz; Network Analysis 1MHz - 20GHz, frequency resolution 10Hz, dynamic range 80 db - 95dB Spectrum Analysis 100KHz - 20GHz, side-band noise -105dBc/Hz@1MHz (1GHz carrier wave) Universally Applicable Interface The external input bias T function provides power for an active power component; Two sorts of USB2.0 Interfaces, used for connecting mobile storage equipment and for computational communication respectively; One 100M Network Interface, used for constructing the local network or achieving long-distance control. Friendly Operator-Machine Interface Built-in instructions and aiding information 7inch High Brightness TFT LCD guarantees the excellent visibility under direct sunlight. Flexibility Small size, lightweight and built-in battery will make the task on the spot easier. Perfect Self-diagnosis function and Self-state checking Smart power management function, remaining power display and low power warning. Cable & Antenna Test The frequency range of the antenna test of the handheld microwave comprehensive tester is 1MHz - 20GHz, with the 10 Hz resolution; the tester can conduct tests of parameters including the standing-wave ration, return loss, impedance and cable loss; simultaneously, it has DTF, which can precisely locates impedance mismatch point.
Network Analysis The network analysis frequency range of the handheld microwave tester is 1MHz - 20GHz, with 10Hz resolution; by providing standard comprehensive 4S Parameter vector network analysis testing capacity, it can conduct full S-parameter test of amplifier, filter, attenuator and duplex device. The display formats include logarithmic, linear, phase, impedance, and polar coordinates etc. Spectrum Analyzer The spectrum analyzer frequency range of the handheld microwave tester is 100kHz - 20GHz. It is featured with functions including wide band, high resolution, high sensitivity, large dynamic range, making it more convenient to procure particular information in the time-domain test, such as parameters including spectrum purity, signal distortion, parasitic, cross modulation. USB Power Measurement (Option) The handheld microwave tester can conduct power measurement by choosing the SAV8723X Series USB power sensors produced by Saluki. It is capable of measuring the spectrum frequency/microwave signal up to 40GHz. Power Monitoring (Option) The of the power inspection of the handheld microwave tester is 100kHz - 20GHz, it can conduct power measurement by choosing spectrum input interface.
Vector Voltage Measurement (Option) The vector voltage measurement range of the handheld microwave comprehensive tester is 1MHz - 20GHz. Typical Applications Multi-domain Test Filter Performance Test Used to test the filter's indexes including insertion loss, ripple wave and out-of-band rejection. Time Domain Measurement The time-domain function of antenna test or network analysis mode can conduct measurement of electrical length, fault location and so forth. Radar& Communication System Performance Test Applicable for measurement of scattering parameters of radar network. Applicable for the development process of all sorts of military and civilian radar and communication systems, capable of conducting not only precise frequency test, power test, phase noise test of all signals during the signal-generation, but also modulation characteristics of all sorts of stray signal, spurious signal and harmonic distortion and signals. Spectral Monitoring and Management Capable of managing aerial radio frequency signal within controllable range, and distinguishing quacking and searching for all sorts of disturbing signals, for instance, to conduct spectrum monitoring and management of military radio, radio station, communication equipment, airport, base station and sensitive areas. Applicable for radio monitoring due to audial demodulation function Communication Satellite Monitoring Applicable for monitoring signal spectrum quality, power and power-controlling state of communication satellite, distinguishing and checking the disturbing signals so as to guarantee the safe, reliable and stable operation of communication satellite net. RFID Domain Test Applicable for the RFID system s transmission stray radiation and field intensity test, frequency deviation test, bandwidth measurement and polling and timing measurement.
Bluetooth Domain Test Applicable for the Bluetooth system s transmitter power test, power spectrum test, modulation test, and stray radiation test of transceiver. Component& Whole-Machine Test Capable of testing the amplitude, phase and group delay characteristics of the S-parameter of the component; highly effective and powerful error-correction capability makes it universally applicable for military and civilian fields including components, radar, aerospace, electrical jamming and counter measurement, communication, radio and television. Capable of conducting tests of parameters of components including cable, connector, amplifier, filter, mixer, attenuator, isolator and coupler, such as gain, frequency response, bandwidth, insertion loss, frequency conversion loss and so forth. Capable of conducting multiple whole-machine and equipment test, for instance, conducting performance tests including frequency, power, phase noise, autoeciousness, and harmonic wave distortion and modulation characteristics during the process of maintenance and monitoring of signal-generator.
Technical Specifications Antenna &Transmission Line test 1MHz - 20GHz Frequency Accuracy ±1 10-6 Frequency Resolution 10Hz Measurement Point 11, 21, 51, 101, 201, 501, 1001 Effective Directionality 32dB - 42dB Effective Source Termination 30dB Network Analysis 1MHz - 20GHz Frequency Accuracy ±1 10-6 Frequency Resolution 10Hz Measurement Point 11, 21, 51, 101, 201, 501, 1001 IF Bandwidth 10Hz - 100kHz, Step by to 1, 2, 10 Effective Directionality 32dB - 42dB Effective Source Termination 30dB S21 Dynamic Range 80dB - 95dB Spectrum Analysis 100kHz - 20GHz(Tunable to 9kHz) Tuning Resolution 1Hz Span 100Hz - 20GHz, 0Hz Resolution Bandwidth 1Hz - 3MHz, Step by 1, 3, 10 Video Bandwidth 1Hz - 3MHz, Step by 1, 3, 10-97dBc/Hz@10kHz(Wave Carrier: 1GHz) Sideband Noise - 98dBc/Hz@100kHz(Wave Carrier: 1GHz) - 105dBc/Hz@1MHz(Wave Carrier: 1GHz)
- 151dBm/Hz (10MHz - 4GHz, Preamplifier on) Displayed Average Noise Level - 133dBm/Hz (10MHz - 8GHz) - 123dBm/Hz (8GHz - 20GHz) ±2.0dB (20-30, Input: 0dBm ~ - 50dBm) Absolute Amplitude Accuracy ±2.7dB (0-50, Input: 0dBm ~ - 50dBm) Residual Response - 80dBm Reference Level Range - 80dBm ~ +30dBm Input VSWR 1.7:1 ( 6GHz, Typical), 2.1:1 (>6GHz, Typical) Power Measurement (Optional) 10MHz - 18GHz (Depending on the probe) Power Range - 50dBm ~ +20dBm Power Accuracy ±1.5dB Frequency Measurement 100kHz - 20GHz Frequency Resolution 1Hz Frequency Accuracy ±[Frequency Readout (1 10-6 (23 )+10-6 /10 )+10Hz] Frequency Sensitivity - 40dBm Interface Cable and Antenna N (F) Vector Network Analysis N (F) Spectrum Analysis N (F) General Information Data Transmission Cooling Method Operating Temp. ( ) Storage Temp. ( ) Power Consumption Power Supply Weight(kg) Dimension (LxWxH) USB, LAN Internal Air Cooling 0 - +50 (32 F - 122 F) -40 - +70 (-40 F - 158 F) 28W AC: 220V~ ±10%, 50Hz±5% Internal Battery, Nominal Voltage: 10.8V, Support 3 hrs 5kg 330mm 230mm 120mm
Standard Package Item Name Qty 1 Handheld Microwave Analyzer 1 Set 2 User Guide 1 PC 3 Standard three-wire power cord AC-DC Power Adapter (Input: 100~ 240V, 1 Set 50/6-Hz, 1.7A; Output: 18.0V-3.33A) 4 USB Communication Cable 1 PC Optional Package Part No. Name Qty S5103-H01 Rechargeable Battery Pack (NI2040HD) 1 PC S5103-H02 T (M) Calibration Kit (SAV31101A) 1 PC S5103-H03 T (F) Calibration Kit (SAV31101B) 1 PC S5103-H04 3.5mm Calibration Kit(SAV31121) 1 PC S5103-H06 SAV87231 USB Power Sensors, 10MHz~18GHz 1 PC S5103-H07 SAV87232 USB Power Sensors, 50MHz~26.5GHz 1 PC S5103-H08 SAV87233 USB Power Sensors, 50MHz~40GHz 1 PC S5103-H09 SAV87230 USB Power Sensors, 9kHz~6GHz 1 PC S5103-H10 Soft Backpack 1 PC S5103-H11 Carrying Case 1 PC S5103-S01 USB Power Measurement (need to reprovision USB power sensors) 1 PC S5103-S02 Power Detection 1 PC S5103-S03 Vector voltmeter 1 PC Note: Information will conduct the necessary updates, the contents of this document are subject to change without notice