CONTECH C-31NW Nonwoven Geotextile

CONTECH C-31NW Nonwoven Geotextile CONTECH C-31NW is a polypropylene, staple fiber, needle punched nonwoven geotextile. environments normally found in soils. CONTECH C-31NW conforms to the property values listed below which have been derived from quality control testing. Grab Tensile Strength ASTM D-4632 80 lbs 356 N Trapezoidal Tear ASTM D-4533 30 lbs 134 N CBR Puncture Resistance ASTM D-6241 175 lbs 934 N Apparent Opening Size (AOS)³ ASTM D-4751 50 US Std. Sieve 0.300 mm Permittivity ASTM D-4491 2.0 Secˉ¹ 2.00 Secˉ¹ Water Flow Rate ASTM D-4491 150 gpm/ft² 6112 l/min/m²

CONTECH C-35NW Nonwoven Geotextile CONTECH C-35NW is a polypropylene, staple fiber, needle punched nonwoven geotextile. environments normally found in soils. CONTECH C-35NW conforms to the property values listed below which have been derived from quality control testing. Grab Tensile Strength ASTM D-4632 90 lbs 400 N Trapezoidal Tear ASTM D-4533 40 lbs 178 N CBR Puncture Resistance ASTM D-6241 260 lbs 1157 N Apparent Opening Size (AOS)³ ASTM D-4751 50 US Std. Sieve 0.300 mm Permittivity ASTM D-4491 2.0 Secˉ¹ 2.00 Secˉ¹ Water Flow Rate ASTM D-4491 150 gpm/ft² 6112 l/min/m²

CONTECH C-38NW Nonwoven Geotextile CONTECH C-38NW is a polypropylene, staple fiber, needle punched, nonwoven geotextile. environments normally found in soils. CONTECH C-38NW is ideally suited for paving fabric applications. CONTECH C-38NW conforms to the property values listed below which have been derived from quality control testing. Grab Tensile Strength ASTM D-4632 90 lbs 400 N Trapezoidal Tear ASTM D-4533 35 lbs 155 N CBR Puncture Resistance ASTM D-6241 275 lbs 122 N Asphalt Retention ASTM D-4751 0.2 gal / sy 0.91 L/M² Melting Point ASTM D-4491 300º F 149º F

CONTECH C-40NW Nonwoven Geotextile CONTECH C-40NW is a polypropylene, staple fiber, needle punched nonwoven geotextile. environments normally found in soils. CONTECH C-40NW conforms to the property values listed below which have been derived from quality control testing. Grab Tensile Strength ASTM D-4632 100 lbs 534 N Trapezoidal Tear ASTM D-4533 50 lbs 222 N CBR Puncture Resistance ASTM D-6241 310 lbs 1380 N Apparent Opening Size (AOS)³ ASTM D-4751 70 US Std. Sieve 0.212 mm Permittivity ASTM D-4491 1.7 Secˉ¹ 1.7 Secˉ¹ Water Flow Rate ASTM D-4491 140 gpm/ft² 5704 l/min/m² 1. The property values listed above are effective 04/2011 and are subject to change without notice. Revised 7/2014

CONTECH C-45NW Nonwoven Geotextile CONTECH C45NW is a polypropylene, staple fiber, needle punched nonwoven geotextile produced by Propex. The fibers are needled to form a stable network that retains dimensional stability relative to each other. The geotextile is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils. CONTECH C45NW conforms to the property values listed below which have been derived from quality control testing. Grab Tensile Strength ASTM D-4632 100 lbs 445 N Grab Elongation ASTM D-4632 60 % 60 % Trapezoidal Tear ASTM D-4533 45 lbs 200 N CBR Puncture Resistance ASTM D-6241 250 lbs 1112 N Apparent Opening Size (AOS)³ ASTM D-4751 70 US Std. Sieve 0.212 mm Permittivity ASTM D-4491 1.80 Secˉ¹ 1.80 Secˉ¹ Water Flow Rate ASTM D-4491 120 gpm/ft² 4889 l/min/m² Roll Sizes 12.5 ft x 360 ft 3.81 m x 109.8 m 15 ft x 360 ft 4.57 m x 109.8 m 1. The property values listed above are effective 04/2011 and are subject to change without notice. Revised 06/2012

CONTECH C-46NW Nonwoven Geotextile CONTECH C-46NW is a polypropylene, staple fiber, needle punched, nonwoven geotextile. environments normally found in soils. CONTECH C-46NW meets the requirements for a Paving Fabric per AASHTO M288-96. CONTECH C-46NW conforms to the property values listed below which have been derived from quality control. Grab Tensile Strength ASTM D-4632 102 lbs 453 N Trapezoidal Tear ASTM D-4533 45 lbs 200 N CBR Puncture Resistance ASTM D-6241 300 lbs 124 N Asphalt Retention ASTM D-4751 0.2 gal / sy 0.91 L/M² Melting Point ASTM D-4491 300º F 149º F

CONTECH C-50NW Nonwoven Geotextile CONTECH C-50NW is a polypropylene, staple fiber, needle punched nonwoven geotextile. environments normally found in soils. CONTECH C-50NW conforms to the property values listed below which have been derived from quality control testing. Grab Tensile Strength ASTM D-4632 135 lbs 601 N Trapezoidal Tear ASTM D-4533 55 lbs 245 N CBR Puncture Resistance ASTM D-6241 350 lbs 1560 N Apparent Opening Size (AOS)³ ASTM D-4751 70 US Std. Sieve 0.212 mm Permittivity ASTM D-4491 1.50 Secˉ¹ 1.50 Secˉ¹ Water Flow Rate ASTM D-4491 115 gpm/ft² 4686 l/min/m²

CONTECH C-60NW Nonwoven Geotextile CONTECH C-60NW is a polypropylene, staple fiber, needle punched nonwoven geotextile. environments normally found in soils. CONTECH C-60NW conforms to the property values listed below which have been derived from quality control testing. Grab Tensile Strength ASTM D-4632 160 lbs 712 N Trapezoidal Tear ASTM D-4533 60 lbs 267 N CBR Puncture Resistance ASTM D-6241 410 lbs 1824 N Apparent Opening Size (AOS)³ ASTM D-4751 70 US Std. Sieve 0.212 mm Permittivity ASTM D-4491 1.5 Secˉ¹ 1.5 Secˉ¹ Water Flow Rate ASTM D-4491 110 gpm/ft² 4480 l/min/m²

CONTECH C-65NW Nonwoven Geotextile CONTECH C-65NW is a polypropylene, staple fiber, needle punched nonwoven geotextile. environments normally found in soils. CONTECH C-65NW conforms to the property values listed below which have been derived from quality control testing. Grab Tensile Strength ASTM D-4632 170 lbs 756 N Trapezoidal Tear ASTM D-4533 70 lbs 312 N CBR Puncture Resistance ASTM D-6241 435 lbs 1935 N Apparent Opening Size (AOS)³ ASTM D-4751 70 US Std. Sieve 0.212 mm Permittivity ASTM D-4491 1.50 Secˉ¹ 1.50 Secˉ¹ Water Flow Rate ASTM D-4491 110 gpm/ft² 4480 l/min/m²

CONTECH C-70NW Nonwoven Geotextile CONTECH C-70NW is a polypropylene, staple fiber, needle punched nonwoven geotextile. environments normally found in soils. CONTECH C-70NW conforms to the property values listed below which have been derived from quality control testing. Grab Tensile Strength ASTM D-4632 180 lbs 801 N Trapezoidal Tear ASTM D-4533 75 lbs 334 N CBR Puncture Resistance ASTM D-6241 460 lbs 2046 N Apparent Opening Size (AOS)³ ASTM D-4751 70 US Std. Sieve 0.212 mm Permittivity ASTM D-4491 1.40 Secˉ¹ 1.40 Secˉ¹ Water Flow Rate ASTM D-4491 100 gpm/ft² 4074 l/min/m²

Contech C-80NW Nonwoven Geotextile Contech C-80NW is a polypropylene, staple fiber, needle punched nonwoven geotextile. The fibers are needled to form a stable network that retains dimensional stability relative to each environments normally found in soils. Contech C-80NW conforms to the property values listed below which have been derived from quality control testing. Grab Tensile Strength ASTM D-4632 205 lbs 912 N Trapezoidal Tear ASTM D-4533 80 lbs 356 N CBR Puncture Resistance ASTM D-6241 525 lbs 2336 N Mullen Burst ASTM D-3786 350 psi 2413 kpa Puncture ASTM D-4833 110 lbs 490 N Apparent Opening Size (AOS)³ ASTM D-4751 80 US Std. Sieve 0.180 mm Permittivity ASTM D-4491 1.5 Secˉ¹ 1.5 Secˉ¹ Water Flow Rate ASTM D-4491 110 gpm/ft² 4482 l/min/m² Roll Sizes 12.5 ft. x 360 ft. 15 ft. x 300 ft. 3.81 m x 109.8 m 4.57 m x 91.5 m Revised 8/2012

CONTECH C-86NW Nonwoven Geotextile CONTECH C-86NW is a polypropylene, staple fiber, needle punched nonwoven geotextile. environments normally found in soils. CONTECH C-86NW conforms to the property values listed below which have been derived from quality control testing. Grab Tensile Strength ASTM D-4632 220 lbs 979 N Trapezoidal Tear ASTM D-4533 95 lbs 423 N CBR Puncture Resistance ASTM D-6241 575 lbs 2558 N Apparent Opening Size (AOS)³ ASTM D-4751 80 US Std. Sieve 0.180 mm Permittivity ASTM D-4491 1.5 Secˉ¹ 1.5 Secˉ¹ Water Flow Rate ASTM D-4491 110 gpm/ft² 4882 l/min/m²

CONTECH C-100NW Nonwoven Geotextile CONTECH C-100NW is a polypropylene, staple fiber, needle punched nonwoven geotextile. The fibers are needled to form a stable network that retains dimensional stability relative to each other. The geotextile is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils. CONTECH C-100NW conforms to the property values listed below which have been derived from quality control testing. Grab Tensile Strength ASTM D-4632 250 lbs 1112 N Trapezoidal Tear ASTM D-4533 100 lbs 445 N CBR Puncture Resistance ASTM D-6241 625 lbs 2780 N Apparent Opening Size (AOS)³ ASTM D-4751 100 US Std. Sieve 0.150 mm Permittivity ASTM D-4491 1.2 Secˉ¹ 1.2 Secˉ¹ Water Flow Rate ASTM D-4491 80 gpm/ft² 3251 l/min/m²

CONTECH C-107NW Nonwoven Geotextile CONTECH C-107NW is a polypropylene, staple fiber, needle punched nonwoven geotextile. The fibers are needled to form a stable network that retains dimensional stability relative to each other. The geotextile is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils. CONTECH C-107NW conforms to the property values listed below which have been derived from quality control testing. Grab Tensile Strength ASTM D-4632 270 lbs 1200 N Trapezoidal Tear ASTM D-4533 105 lbs 467.5N CBR Puncture Resistance ASTM D-6241 725 lbs 3,228.2N Apparent Opening Size (AOS)³ ASTM D-4751 100 US Std. Sieve 0.150 mm Permittivity ASTM D-4491 1.2 Secˉ¹ 1.2 Secˉ¹ Water Flow Rate ASTM D-4491 85 gpm/ft² 3460 l/min/m²

CONTECH C-110NW Nonwoven Geotextile CONTECH C-110NW is a polypropylene, staple fiber, needle punched nonwoven geotextile. The fibers are needled to form a stable network that retains dimensional stability relative to each other. The geotextile is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils. CONTECH C-110NW conforms to the property values listed below which have been derived from quality control testing. Grab Tensile Strength ASTM D-4632 275 lbs 1224 N Trapezoidal Tear ASTM D-4533 105 lbs 467 N CBR Puncture Resistance ASTM D-6241 725 lbs 3225 N Apparent Opening Size (AOS)³ ASTM D-4751 100 US Std. Sieve 0.150 mm Permittivity ASTM D-4491 1.2 Secˉ¹ 1.2 Secˉ¹ Water Flow Rate ASTM D-4491 85 gpm/ft² 3463 l/min/m²

CONTECH C-120NW Nonwoven Geotextile CONTECH C-120NW is a polypropylene, staple fiber, needle punched nonwoven geotextile. environments normally found in soils. CONTECH C-120NW conforms to the property values listed below which have been derived from quality control. Grab Tensile Strength ASTM D-4632 300 lbs 1335 N Trapezoidal Tear ASTM D-4533 115 lbs 512 N CBR Puncture Resistance ASTM D-6241 825 lbs 3670 N Apparent Opening Size (AOS)³ ASTM D-4751 100 US Std. Sieve 0.150 mm Permittivity ASTM D-4491 1.0 Secˉ¹ 1.0 Secˉ¹ Water Flow Rate ASTM D-4491 75 gpm/ft² 3056 l/min/m²

CONTECH C-160NW Nonwoven Geotextile CONTECH C-160NW is a polypropylene, staple fiber, needle punched nonwoven geotextile. The fibers are needled to form a stable network that retains dimensional stability relative to each other. The geotextile is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils. CONTECH C-160NW conforms to the property values listed below which have been derived from quality control testing. Grab Tensile Strength ASTM D-4632 380 lbs 1691 N Trapezoidal Tear ASTM D-4533 150 lbs 644 N CBR Puncture Resistance ASTM D-6241 1025 lbs 4559 N Apparent Opening Size (AOS)³ ASTM D-4751 100 US Std. Sieve 0.150 mm Permittivity ASTM D-4491 0.70 Secˉ¹ 0.70 Secˉ¹ Water Flow Rate ASTM D-4491 50 gpm/ft² 2037 l/min/m²

CONTECH C-170NW Nonwoven Geotextile CONTECH C-160NW is a polypropylene, staple fiber, needle punched nonwoven geotextile. The fibers are needled to form a stable network that retains dimensional stability relative to each other. The geotextile is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils. CONTECH C-170NW conforms to the property values listed below which have been derived from quality control testing. Grab Tensile Strength ASTM D-4632 390 lbs 1735 N Trapezoidal Tear ASTM D-4533 155 lbs 690 N CBR Puncture Resistance ASTM D-6241 1125 lbs 5004 N Apparent Opening Size (AOS)³ ASTM D-4751 100 US Std. Sieve 0.150 mm Permittivity ASTM D-4491 0.70 Secˉ¹ 0.70 Secˉ¹ Water Flow Rate ASTM D-4491 50 gpm/ft² 2037 l/min/m² 1. The property values listed above are effective 7/2010 and are subject to change without notice.