Carbon Film Fixed Resistor CB Series

Similar documents
DATA SHEET CHIP RESISTORS RT Series 1%; 0.5%; 0.25%; 0.1%

Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of

Part Marking Instructions Chip Resistors

Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard

SMD High Power Precision Resistors

SPECIFICATION FOR APPROVAL. Approved by

High-ohmic/high-voltage resistors

Metal Film Resistors, Industrial, Precision

Metal Film Resistors, Industrial, Precision

High-ohmic/high-voltage resistors

Carbon Film Fixed Resistor Axial Leaded

High Power Thick Film Chip Resistor 2512

WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402

Precision Leaded Resistors

Automotive and Anti-Sulfuration Chip Resistor 0402

Precision Surface Mount Resistors Wirewound or Metal Film Technologies

Metal Film Resistors, Military, MIL-R Qualified, Type RN and MIL-PRF Qualified, Type RL

High Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors

Thick Film Resistor Networks, Dual-In-Line, Molded DIP

Metal Film Resistors, Non-Magnetic, Industrial, Precision

WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors

Selection Guide for Conversion of Carbon Composition Resistors

Thick Film Resistor Networks, Military, MIL-PRF Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP

TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603

DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/0805/1206/2512. RoHS compliant & Halogen free

High Ohmic/High Voltage Metal Glaze Leaded Resistors

FEATURES 200 % 175 % 150 % 125 % 100 % 75 % 50 % 25 %

DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free

Metal Film Resistors, Military, MIL-R Qualified, Precision, Type RN and MIL-PRF Qualified, Type RL

High Surge Axial Cemented Wirewound Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors

50 W Power Resistor, Thick Film Technology, TO-220

DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512

Capacitance Cap. Tol. Suffix construction. Rated voltage

High Ohmic / High Voltage Metal Glaze Leaded Resistors

Metal Film Resistors, Industrial, Flameproof

Power Meter Series 700

High Ohmic/High Voltage Metal Glaze Leaded Resistors

Ceramic Trimmer Capacitors

SMD PTC - Nickel Thin Film Linear Thermistors

Insulated Precision Wirewound Resistors Axial Leads

High Ohmic/High Voltage Metal Film Leaded Resistors

DATA SHEET THICK FILM CHIP RESISTORS Introduction

SPECIFICATION. Topview 5550 SMD LED IWS 505-RB. Product : Topview 5550 SMD LED Part No : IWS-505-RB Customer : Date : Ver.1.0.

AZ420 MINIATURE GENERAL PURPOSE RELAY

Fixed Resistors. RESISTORS FOR MEDICAL APPLICATIONS - Application Note

5W HI-POWER LED SPECIFICATION

Professional Thin Film MELF Resistors

DATA SHEET PART NO. : L-314YD REV : A / 4

Wirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount

Contents. 12. Lot Number Reel Packing Structure Precaution for Use Hazard Substance Analysis Revision History 18

Series AMEPR30-AZ up to 2.5A AC-DC / DC-DC LED Driver / Converter

Ultra Precision Metal Film Leaded Resistors

EVERGREEN (C.P.) USA INC. TEL: (650) FAX: (650) SPECIFICATIONS Lithium Battery CR123A- 1700mAh

Power Resistor Thick Film Technology

3. ELECTRICAL PERFORMANCE PROPERTY TEST CONDITION PERFORMANCE 3. 1 Contact Resistance 1) Center Push 100mΩ Max

NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator

Insulation Resistance Testing of Low Voltage Cables in the Field

LITHIUM BATTERY CR123A SPECIFICATION

Product Specification

Use of Carbon Nanoparticles for the Flexible Circuits Industry

Power chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability.

Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC

LM78XX Series Voltage Regulators

DATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/122/124/162/164/248/324/158/358 TC: 122/124/164

Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications

Standard Thick Film Chip Resistors

LM35 Precision Centigrade Temperature Sensors

FEATURES BODY DIA. MAX. Type M AWG 30: [0.254] Type C AWG 28: [0.320] Type T AWG 30: [0.254]

AC and Pulse Film Foil Capacitors KP Radial Potted Type

No. STSE-CW2163B <Cat.No > SPECIFICATIONS FOR NICHIA WHITE LED MODEL : NSPW315BS NICHIA CORPORATION -0-

STAR PIPE Polska S.A ul. Gdyńska Czerwonak tel fax

TAIYO PSR-4000 AUS703

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch)

WCAP-CSGP Ceramic Capacitors

Harmonic Drive acutator P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l

Thin Film MELF Resistors

Power Resistor for Mounting onto a Heatsink Thick Film Technology

PolyGard Carbon Monoxide CO Transmitter ADTX3 1110

Model CS 64 Mini-DIN Cable and Adaptor

MICRO SWITCH EJF SERIES

How To Read A Pipe From A Sensor

Encoder. Switches. Series Size SMD

Tape Wound, Split Core and Ebony Current Transformers

Adjustment functions for both span and shift have been incorporated

Low Cost, Precision IC Temperature Transducer AD592*

SLLP G PRODUCT DATASHEET. RoHS Compliant

NTC Thermistors, Radial Leaded and Coated

3W RGB High Power LED

0.84" x 2.00" Z-TRAUQ INC. Tel.: (450) Fax: (450) z-trauq@qc.aira.com SPLIT CORE CURRENT TRANSFORMER MODEL 1SP.

MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision Precision Thin Film Chip Resistors

PV module safety qualification according to IEC 61730:2004 EN 61730:2007

NEMA Magnet Wire Thermal Class Ratings

Thermal Adhesives Ther-O-Bond 1500

Specification of 5 Wire Analog Touch Panel

Application Note 142 August New Linear Regulators Solve Old Problems AN142-1

3mm Photodiode,T-1 PD204-6C/L3

No. : EX##-OMF0004 OPERATION MANUAL. SI unit EX12#-SMB1

Transcription:

DIP Carbon Film Fixed CB Series Features Lowest cost, prompt delivery Excellent long term stability Wide resistance range 0Ω22~100MΩ Power ratings TYPE / Rated Power at 70 L D H d Comment Standard Miniature 1/8W 1/4WS 3.3± 0.4 Standard Series: Light 0.2 1.8±0.3 26±2.0 0.43±0.05 0.2 Brown (khaki) Color Epoxy 1/4W 1/2WS 6.3±0.5 2.3±0.3 26±2.0 0.5±0.03 Coating 1/3W 1/2WSS 8.5±0.5 2.7±0.5 26±2.0 0.52±0.03 1/2W 1WS 9.0±0.5 3.2±0.5 26±2.0 0.65±0.03 Miniature Series: Pink Color Epoxy Coating 1W 2WS 11.5±1.0 4.5±0.5 30±2.0 0.76±0.03 2W 3WS 15.5±1.0 5.0±0.5 32±2.0 0.76±0.03 Electrical Characteristics Power rating at 70 1/8W 1/4WS 1/4W 1/2WS 1/3W 1/2WSS 1/2W 1WS 1W 2WS 2W 3WS Operating Temp. Range -55 to +155 Max. Working Voltage 150V 200V 250V 300V 280V 320V 350V 400V 450V 500V 500V 500V Max. Overload Voltage 300V 400V 500V 500V 500V 600V 700V 800V 1000V 1000V 1000V 1000V Dielectric Withstanding Voltage Resistance Range (±5%) 300V 400V 500V 500V 500V 600V 700V 800V 1000V 1000V 1000V 1000V 1Ω~10MΩ, E24 series For non-standard parts, please contact our sales dept. Power Graph ( ) Hot-Spot Temperature (%) Rated Load(%) 70 SURFACE TEMP. RISE ( ) CB 2WS CB 200/CB1WS CB 100/CB50S CB 50 / CB25S CB 12 / CB25 Ambient Temperature ( ) Applied Load % of RCWV

Temperature Coefficient (T.C.R.) TYPE Max. of Temp. Coefficient ppm/ under 100KΩ 100KΩ to 1MΩ 1MΩ to 4M7Ω 1W, 2W, 2WS, 3WS ±350 ppm -0ppm -500ppm -0ppm -1000ppm 1/6W, 1/4W, 1/4WS, 1/2W, 1/2WS, 1WS +350ppm- 500ppm -0ppm-700ppm -0ppm-1500ppm Environmental Characteristics Performance Test Test Method Requirements Short Time Overload JIS-C-5202 5.5 2.5 times RCWV for 5 seconds ±(0.75%+0.05Ω) Temperature Coefficient Resistance (T.C.R.) Resistance value at room Temperature and room Temperature+100 page Dielectric Withstanding Votage JIS-C5202 5.7 In V-Block for 60 seconds By Pulse Overload JIS-C5202 5.8 4 times RCWV for 10000cycles(1sec.on,25secs.off) ±(1%+0.05Ω) Insulation Resistance JIS-C5202 5.6 In V-Block >10000MΩ Load Life Load Life in Humidity Solder Ability JIS-C5202 7.10 70 at RCWV for 1000hrs.(1.5hrs. on,0.5hrs.off) JIS-C5202 7.9 40±2 90~95%RH at RCWV for 1000hrs. (1.5hrs. on,0.5hrs.off) JIS-C5202 6.5 235±5 for 2±0.5 seconds ±(3%+0.05Ω) Less than 100KΩ±3% 100KΩ or more±5% 95% min. coverage Resistance to Solvent JIS-C5202 6.9 Trichroethane for 1 min. with ultrasonic No deterioration of coatings and markings Terminal Strength Direct load for 10 sec. In the direction off the terminal leads. Tensile: 2.5kg Rated continuous Working Voltage (RCWV) = POWER.RATING.* RESISTANCE.VALUE

Parts Number Explanation CB 1/2W J 10R P 05 (Inch) 1/8W 1/4W 1/3W 1/2WS 1/2WSS J:±5% s P W:Tape D:Bulk 1/4WS 1W 1WS 2W 2WS 3W

Metal Film MF Series Features Low noise Low t.c.r. 100ppm, 50ppm, 25ppm, 10ppm, 5ppm. High precision 1%, 0.5%, 0.25%, 0.1% TYPE / Rated Power at 70 L D H d Comment Standard Miniature 1/8W 1/4WS 3.3± 0.4 Standard Series: Blue Color 1.8±0.3 29±2.0 0.43±0.05 0.2 Epoxy Coating 1/4W 1/2WS 6.3±0.5 2.3±0.3 28±2.0 0.5±0.03 Miniature Series: 1/2W 1WS 9.0±0.5 3.2±0.5 26±2.0 0.6±0.03 Blue Color Epoxy Coating 1W 2WS 11.5±1.0 4.5±0.5 35±2.0 0.76±0.03 2W 3WS 15.5±1.0 5.0±0.5 32±2.0 0.76±0.03 Electrical Characteristics Power rating at 70 1/8W 1/4WS 1/4W 1/2WS 1/2W 1WS 1W 2WS 2W 3WS Operating Temp. Range -55 to +155 Max. Working Voltage 200V 200V 250V 300V 350V 400V 450V 500V 500V 500V Max. Overload Voltage 400V 400V 500V 600V 700V 800V 1000V 1000V 1000V 1000V Dielectric Withstanding Voltage 300V 400V 500V 500V 500V 700V 1000V 1000V 1000V 1000V Resistance Range (±1%.±0.5%) 10Ω~1MΩ, E96series Resistance Range (±0.25%.±0.1%) 100Ω~100KΩ, E192series For non-standard parts, please contact our sales dept. Power Graph ( ) Hot-Spot Temperature (%) Rated Load(%) 70 Ambient Temperature ( ) SURFACE TEMP. RISE ( ) Applied Load % of RCWV MF 2WS MF 200 / MF 1WS MF 100 / MF 50S MF 50 / MF 25S MF 25 MF 12

Temperature Coefficient (T.C.R.) TYPE Max. of Temp. Coefficient ppm/ 1/8W, 1/4W, 1/4WS, 1/2W, 1/2WS, 1W, 1WS, 2W, 2WS, 3WS ±15ppm/, ±25ppm/, ±50ppm/, ±100ppm/ Environmental Characteristics Performance Test Test Method Requirements Short Time Overload JIS-C-5202 5.5 2.5 times RCWV for 5 seconds ±(0.25%+0.05Ω) Temperature Coefficient Resistance (T.C.R.) Resistance value at room Temperature and room Temperature+100 By Dielectric Withstanding Votage JIS-C5202 5.7 In V-Block for 60 seconds By Pulse Overload JIS-C5202 5.8 4 times RCWV for 10000 cycles(1sec.on,25secs.off) ±(0.75%+0.05Ω) Insulation Resistance JIS-C5202 5.6 In V-Block >10000MΩ Load Life Load Life in Humidity JIS-C5202 7.10 70 at RCWV for 1000hrs.(1.5hrs. on,0.5hrs.off) JIS-C5202 7.9 40±2 90~95%RH at RCWV for 1000hrs. (1.5hrs. on,0.5hrs.off) ±(1.5%+0.05Ω) ±(1.5%+0.05Ω) Solder Ability JIS-C5202 6.5 260±5 for 2±0.5 seconds 95% min. coverage Resistance to Solvent JIS-C5202 6.9 Trichroethane for 1 min. with ultrasonic No deterioration of coatings and markings Terminal Strength Direct load for 10 sec. In the direction off the terminal leads. Tensile: 2.5kg Rated continuous Working Voltage (RCWV) = POWER.RATING.* RESISTANCE.VALUE

Parts Number Explanation MF 1/8W D 10R P 05 (Inch) 1/8W 1/4W 1/3W 1/2WS B:±0.1% C:±0.25% D:±0.5% F:±1% s P W:Tape D:Bulk 1/2W 1/4WS 1W 1WS 2W 2WS 3W

Metal Oxide Flame-Proof MO Series Features Low cost, prompt delivery High power-to-size ratio for significant space savings Excellent long-time stability Complete flameproof construction UL 1412 High surge/overload capability Wide resistance range: 0.1Ω~1mΩ Controlled temperature coefficient Resistance standard tolerance:±5%(consult factory for±2% ±1%) Coating and marking resist trichorethelyne, freon, and other cleaning agents Non-inductive design, resistance range: 0.1Ω~100Ω TYPE / Rated Power at 70 Standard Miniature L D H d Comment 1/4W 1/2WS 6.3±0.5 2.3±0.3 28±2.0 0.55±0.03 1/2W 1WS 9.0±0.5 3.2±0.5 26±2.0 0.65±0.03 1W 2WS 11.5±1.0 4.5±0.5 35±2.0 0.76±0.03 2W 3WS 15.5±1.0 5.0±0.5 32±2.0 0.76±0.03 Standard Series: Flameproof Coating, Grey color Miniature Series: Flameproof Coating, Pink color 3W 5WS 17.5±1.0 6.5±0.5 35±2.0 0.78±0.03 5W 7WS 24.5±1.0 8.5±0.5 35±2.0 0.78±0.03 Electrical Characteristics Power rating at 70 1/4W 1/2WS 1/2W 1WS 1W 2WS 2W 3WS 3W 5WS 5W 7WS Operating Temp. Range -55 to +155 Max. Working Voltage 200V 250V 250V 300V 350V 350V 350V 400V 400V 750V 750V 750V Max. Overload Voltage 350V 400V 400V 500V 600V 600V 600V 700V 700V 1000V 1000V 1000V Dielectric Withstanding Voltage Resistance Range (±1%.±2%.±5%) 350V 350V 350V 400V 500V 500V 500V 600V 600V 1000V 1000V 1000V 1Ω~510KΩ, E24 series For non-standard parts, please contact our sales dept. Power Graph ( ) Hot-Spot Temperature (%) Rated Load(%) 70 Ambient Temperature ( ) SURFACE TEMP. RISE ( ) Applied Load % of RCWV MO 3B 5B/ MO 7WS MO 2WS/ MO 3WS MO 2B / MO 1WS MO 1B MO 1/2B MO 1/4B

Temperature Coefficient (T.C.R.) TYPE 1/4W, 1/2WS, 1/2W, 1WS 1W, 2WS, 2W, 3WS, 3W, 5W, 5WS, 7WS Max. of Temp. Coefficient ppm/ ±300 ppm Environmental Characteristics Performance test Test Method Requirements Short time Overload JIS-C-5202 5.5 2.5 times RCWV for 5 seconds ±(0.25%+0.05Ω) Temperature Coefficient Resistance (T.C.R.) Resistance value at room Temperature and room Temperature+100 By Dielectric Withstanding Voltage JIS-C5202 5.7 In V-Block for 60 seconds By Pulse Overload JIS-C5202 5.8 4 times RCWV for 10000cycles(1sec.on,25secs.off) ±(1%+0.05Ω) Insulation Resistance JIS-C5202 5.6 In V-Block >10000MΩ Load Life Load Life in Humidity JIS-C5202 7.10 70 at RCWV for 1000hrs.(1.5hrs. on,0.5hrs.off) JIS-C5202 7.9 40±2 90~95%RH at RCWV for 1000hrs. (1.5hrs. on,0.5hrs.off) ±(1.5%+0.05Ω) ±(1.5%+0.05Ω) Solder Ability JIS-C5202 6.5 260±5 for 2±0.5 seconds 95% min. coverage Resistance to Solvent JIS-C5202 6.9 Trichroethane for 1 min. with ultrasonic No deterioration of coatings and markings Terminal Strength Direct load for 10 sec. In the direction off the terminal leads. Tensile: 2.5kg Rated continuous Working Voltage (RCWV) = POWER.RATING.* RESISTANCE.VALUE

Parts Number Explanation MO 1/4W F 10R P 05 (Inch) 1/4W 1/2WS 1/2W 1W F:±1% G:±2% J:±5% s P W:Tape D:Bulk 1WS 2W 2WS 3W 5W 5WS 7WS

Wirewound s Flame -Proof Coating KNP Series Features Super heat dissipation;small linear temperature coefficient Instant overload capability;low noise figure and without annual shift on resistance value Complete flameproof construction UL-1412 Identify NKNP by fifth color band with green color. range ±5% ±2% ±1% TYPE / Rated Power at 70 Standard Miniature L D H d Comment 1/2W 1WS 9.0±0.5 3.2±0.5 26±2.0 0.65±0.03 1W 2WS 11.5±1.0 4.5±0.5 35±2.0 0.78±0.03 2W 3WS 15.5±1.0 5.0±0.5 32±2.0 0.78±0.03 3W 5WS 17.5±1.0 6.0±0.5 32±2.0 0.78±0.03 Standard Series:Grey Color Epoxy Coating Miniature Series: Pink Color Epoxy Coating 5W 7WS 24.5±1.0 8.0±0.5 38±2.0 0.78±0.03 Electrical Characteristics Power rating at 70 1/2W 1WS 1W 2WS 2W 3WS 3W 5WS 5W 7WS Operating Temp. Range -55 to +155 Dielectric Withstanding volt Resistance Range (±1%, ±2%, ±5%) 300V 400V 0.01Ω~50Ω 0.01Ω~100Ω 0.01Ω~330Ω 0.01Ω~330Ω 0.01Ω~560Ω For non-standard parts, please contact our sales dept. Power Graph ( ) Hot-Spot Temperature (%)

Temperature Coefficient (T.C.R.) TYPE 1/2W, 1WS, 1W, 2W, 2WS, 3W, 3WS, 5W, 5WS, 7WS Max. of Temp. Coefficient ppm/ ±400 ppm Environmental Characteristics Performance test Test Method Requirements Short time Overload JIS-C-5202 5.5 2.5 times RCWV for 5 seconds ±(2%+0.05Ω) Temperature Coefficient Resistance (T.C.R.) Resistance value at room Temperature and room Temperature+100 By Dielectric Withstanding Voltage JIS-C5202 5.7 In V-Block for 60 seconds By Insulation Resistance JIS-C5202 5.6 In V-Block >100MΩ Load Life Load Life in Humidity JIS-C5202 7.10 70 at RCWV for1000hrs.(1.5hrs. on,0.5hrs.off) JIS-C5202 7.9 40±2 90~95%RH at RCWV for1000hrs. (1.5hrs. on,0.5hrs.off) ±(5%+0.05Ω) ±(5%+0.05Ω) Solder Ability JIS-C5202 6.5 260±5 for 2±0.5 seconds 95% min. coverage Terminal Strength Direct load for 10 sec. In the direction off the terminal leads. Tensile: 2.5kg Rated continuous Working Voltage (RCWV) = POWER.RATING.* RESISTANCE.VALUE

Parts Number Explanation KNP 1/2W J 10R P 05 (Inch) 1/2W 1/2WS 1/W F:±1% G:±2% J:±5% s P W:Tape D:Bulk 1WS 2W 2WS 3W 3WS 5W 5WS 7WS

Cement SPS Series L Features Heat and flame resistant Completely insulated character suitable for printed circuit bord. For high resistance value, the winding core will be replaced by metal oxide film cutting core (RS type). Non-inductive type is available on request. : ±5% ±10%. TYPE L W D P Wirewound RESISTANCE RANGE Ω RS 5W 10 9 22 5 0.1 Ω ~ 200 Ω 200 Ω ~ 50K Ω 7W 10 9 35 10 0.1 Ω ~ 300 Ω 300 Ω ~ 50K Ω 10W 10 9 48 10 0.1 Ω ~ 500 Ω 500 Ω ~ 50K Ω 20W 60 14 13 10 0.1 Ω ~ 500 Ω 500 Ω ~ 50K Ω Parts Number Explanation SPS 5W J 10R P 01 (Inch) 5W 7W 10W 20W J:±5% K:±10% s P W:Bulk SQM Series

Features Heat and flame resistant Completely insulated character suitable for printed circuit bord. For high resistance value, the winding core will be replaced by metal oxide film cutting core (RS type). Non-inductive type is available on request. : ±5% ±10%. TYPE H ± 1.5 W ± 1 S ± 1 RESISTANCE RANGE Ω Wirewound Metal oxide 5W 25 13 9 0.1 Ω ~ 50 Ω 50 ~ 50K Ω 7W 39 13 9 0.1 Ω ~ 500 Ω 500 ~ 47K Ω 10W 51 13 9 0.1 Ω ~ 500 Ω 500 ~ 47K Ω 10WS 35 16 12 0.1 Ω ~ 500 Ω 500 ~ 47K Ω Parts Number Explanation SQM 5W J 10R P 01 5W 7W 10W 10WS J:±5% K:±10% s P W:Bulk

SQT Series Features Heat and flame resistant Completely insulated character suitable for printed circuit bord. For high resistance value, the winding core will be replaced by metal oxide film cutting core (RS type). Non-inductive type is available on request. : ±5% ±10%. TYPE W ± 1 H ± 1 L ± 1 t ± 0.5 RESISTANCE RANGE Ω Wire wound Metal oxide 5W 10 9 22 1.5 0.1 Ω ~ 50 Ω 50 ~ 50K Ω 7W 10 9 35 3.0 0.1 Ω ~ 500 Ω 500 ~ 47K Ω 10W 10 9 48 3.0 0.1 Ω ~ 500 Ω 500 ~ 47K Ω 15W 12.5 12.5 48 3.0 0.1 Ω ~ 500 Ω 500 ~ 47K Ω 20W 13 14 60 5.0 0.1 Ω ~ 500 Ω 500 ~ 47K Ω Parts Number Explanation SQT 5W J 10R P 01 (Inch) 5W 7W 10W 15W 20W J:±5% K:±10% s P W:Bulk

SQP Series Features Heat and flame resistant Completely insulated character suitable for printed circuit bord. For high resistance value, the winding core will be replaced by metal oxide film cutting core (RS type). Non-inductive type is available on request. : ±5% ±10%. RESISTANCE RANGE Ω TYPE L ± 0.5 W ± 0.5 H ± 0.5 d ± 0.03 Wire wound Metal oxide 2W 18.0 7.0 7.0 0.65 0.1 Ω ~ 50 Ω 50Ω~ 200K Ω 3W 22.0 8.0 8.0 0.8 0.1 Ω ~ 50 Ω 50Ω~ 330K Ω 5W 22.0 9.5 9.0 0.8 0.1 Ω ~ 50 Ω 50Ω~ 500K Ω 7W 35.0 9.5 9.0 0.8 0.1 Ω ~ 500 Ω 500Ω~ 500K Ω 10W 48.0 9.5 9.0 0.8 0.1 Ω ~ 500 Ω 500Ω~ 500K Ω 15W 48.0 12.5 12.0 0.8 0.1 Ω ~ 500 Ω 500Ω~ 150K Ω 20W 60.0 14.0 13.0 0.8 0.1 Ω ~ 500 Ω 500Ω~ 150K Ω 25W 60.0 14.0 13.0 0.8 0.1 Ω ~ 500 Ω 500Ω~ 150K Ω 30W 77.0 18.0 17.0 0.8 0.1 Ω ~ 500 Ω 500Ω~ 150K Ω 40W 90.0 19.0 18.0 0.8 0.1 Ω ~ 500 Ω 500Ω~ 150K Ω Parts Number Explanation SQP 2W J 10R P 01 (Inch) 2W 3W 5W 7W 10W 15W 20W 25W 30W 40W J:±5% K:±10% s P W:Bulk

SQZ Series Features Heat and flame resistant Completely insulated character suitable for printed circuit bord. For high resistance value, the winding core will be replaced by metal oxide film cutting core (RS type). Non-inductive type is available on request. : ±5% ±10%. TYPE L H W S H1 H2 P1 P2 P3 P4 RESISTANCE RANGE Ω Wire wound Metal oxide 5W 27.0 9.5 9.5 15.0 24.0 9.5 4.0 2.0 5.0 1.4 0.1 ~ 100 Ω 100 Ω ~ 50K Ω 7W 35.0 9.5 9.5 22.5 24.0 9.5 4.0 2.0 5.0 1.4 0.1~ 500 Ω 500 Ω ~ 50K Ω 10W 48.0 9.5 9.5 32.5 24.0 9.5 4.0 2.0 5.0 1.4 0.2 ~ 500 Ω 500 Ω ~ 50K Ω 15W 48.0 12.5 12.5 32.5 34.5 15 7.0 6.0 10.0 2.7 0.5~ 500 Ω 500 Ω ~ 150K Ω 20W 63.5 12.5 12.5 42.5 34.5 15 7.0 6.0 10.0 2.7 1~ 50 Ω 500 Ω ~ 150K Ω 3WS 22.0 8.0 8.0 10.0 23.0 12 4.0 2.0 5.0 1.4 0.1~ 50 Ω 50 Ω ~ 33K Ω 5WS 22.0 9.5 9.5 10.0 24.0 12 4.0 2.0 5.0 1.4 0.1~ 50 Ω 50 Ω ~ 50K Ω Parts Number Explanation SQM 5W J 10R P 01 5W 7W 10W 10WS J:±5% K:±10% s P W:Bulk

SQH / SQHG Series SQH Series SQHG Series Features Heat and flame resistant Completely insulated character suitable for printed circuit bord. For high resistance value, the winding core will be replaced by metal oxide film cutting core (RS type). Non-inductive type is available on request. : ±5% ±10%. TYPE RESISTANCE RANGE Ω Wire wound Metal oxide L±2 H±1 W±1 S±1 H±1 P1±1 P2±1 P3±1 P4±1 d 10W 0.5 Ω ~ 100 Ω 500 Ω ~ 50K Ω 48.0 10.0 10.0 33 21 12 6 8.0 3.0 4 15W 1 Ω ~ 500 Ω 500 Ω ~ 150K Ω 48.0 12.0 12.0 33 21 12 6 8.0 3.0 4 20W 1 Ω ~ 500 Ω 500 Ω ~ 150K Ω 63.7 12.0 12.0 42 24 12 6 8.0 3.0 4 30W 1 Ω ~ 500 Ω 75.0 19.0 18.0 56 30 17 8 10.0 3.0 4 40W 1 Ω ~ 500 Ω 90.0 19.0 18.0 68 30 17 8 10.0 3.0 4 Parts Number Explanation SQH 10W J 10R P 01 (Inch) 10W 15W 20W 30W 40W J:±5% K:±10% s P W :Bulk

Technical Data